Beruflich Dokumente
Kultur Dokumente
The Rib Beams are an integral component of the Rib and Block system.
Custom Crete’s lintels are manufactured with a crimped prestressing rib beam wire (1550 -1700
MPa) according to SANS 1504 -1990.
Each Rib Beam contains 5 x 5mm diameter pre-stressed wires, which are prestressed to
approximately 75% of their ultimate tensile strength (UTS).
The Rib Beams are manufactured with shear connectors (made from 6mm round bar) placed at
approximately 800 / 1000mm.
Height (mm) 70
Code Rib
Texture Smooth
All rights reserved. © 2019 . CustomCrete consultants, its sponsors, contributors and
advertisers disclaim all liability for any loss, damage, injury or expense that might arise from
the use of, or reliance upon, the services or intellectual property contained herein.
Website design by Paul Russell Designs
Sitemap