Sie sind auf Seite 1von 7

EVIDENCE PLAN

QUALIFICATION: COMPUTER SYSTEMS SERVICING NC II


Title of
Assessment INSTITUTIONAL ASSESSMENT
Units of 1. Install and Configure Computer Systems
competency 2. Set-up Computer Networks
covered
3. Set-up Computer Servers
4. Maintain and Repair Computer Systems and
Networks

with
Ways in which evidence will be collected:

with Questioning
[tick the column]

Demonstration

Examination
Questioning
Observation

Written
The evidence must show that the candidate …
 Plans and prepares unit assembly to ensure
OH&S policies and procedures are follow in /
accordance with systems requirements
 Identifies and obtains materials necessary to
complete the work in accordance with established /
procedures and checks against systems
requirements
 Obtains tools, equipment and testing devices
which needs to carry out installation work in /
accordance with establish procedures and checks
for correct operation and safety
 Assembles computer hardware in accordance
with established procedures and systems /
requirements
 Performs Basic-input-output-system (BIOS)
configuration in accordance with hardware /
requirements
 Creates portable bootable devices in accordance
with software manufacturer instruction /
 Prepares customized installers in accordance
with software utilization guide and end user /
agreement
 Carries out installation of portable applications
in accordance with software user guide and /
software license
 Installs Operating system (OS) in accordance
with established installation procedures and to /
comply with end-user requirements
 Installs and configures peripherals/devices
drivers in accordance with manufacturer’s /
instructions and/or OS installation procedures
 Accesses and installs OS and drivers
updates/patches in accordance with
manufacturer’s recommendations and /
requirements
 Undertakes on-going checks of the quality of the
work in accordance with established procedures /
 Installs application software based on software
installation guides, end-user requirements and /
software license agreement
 Carries out variation to application software
installation in accordance to customer/client /
requirements
 Accesses and installs software updates in
accordance with manufacturer’s /
recommendations and requirements
 Tests devices / systems and/or installation to
determine whether it conforms to requirements
/

 Conducts stress test to ensure reliability of


equipment in accordance with manufacturer’s /
instructions and system requirements
 Follows 5S and 3Rs according to environmental
policies /
 Forwards documentation to appropriate
personnel and /or authority in relation to the test /
in accordance with requirements
NOTE: *Critical aspects of competency
Demonstration and Questioning Checklist
Candidate’s JUAN DELA CRUZ
name:
Trainer’s name: ROSELYN B. OSORIO
QUALIFICATION: COMPUTER SYSTEMS SERVICING NC II
Title of INSTITUTIONAL ASSESSMENT
Assessment
Units of 1. Install and Configure Computer Systems
competency 2. Set-up Computer Networks
covered:
3. Set-up Computer Servers
4. Maintain and Repair Computer Systems and
Networks
Date of
assessment:
Time of
assessment:
Instructions for demonstration
Please see attached Instruction for Demonstration (Candidate)
Supplies and Materials Tools and equipment
 Manuals  Computer Unit
 Notebook and pen  Multi-tester
 Anti-static wrist strap

 to show if
evidence is
demonstrated
During the demonstration of skills, the candidate: N/
Yes No
A
 Planned and prepared unit assembly to ensure OH&S
policies and procedures are followed in accordance with   
systems requirements
 Identified and obtained materials necessary to
complete the work in accordance with established   
procedures and checked against systems requirements
  
 Obtained tools, equipment and testing devices needed
to carry out the installation work in accordance with
  
established procedures and checked for correct
operation and safety
 Assembled computer hardware in accordance with   
establish procedures and systems requirements
 Configured basic-input-output-system (BIOS) in
  
accordance with hardware requirements
 Created portable bootable devices in accordance with
  
software manufacturer instruction
 Prepared customized installers in accordance with
  
software utilization guide and end user agreement
 Carried out installation of portable applications in
accordance with software user guide and software   
license.
 Installed operating system (OS) in accordance with
established installation procedures and to comply with   
end-user requirements
 Installed and configured peripherals/ devices drivers in
accordance with manufacturer’s recommendations and   
requirements
 Accessed and installed OS and drivers updates/
patches in accordance with manufacturer’s   
recommendations and requirements
 Undertaken on-going checks of the quality of the work
  
in accordance with established procedures
 Installed application software based on software
installation guides, end-user requirements and   
software license agreement
 Carried out variation to application software in
  
accordance to customer/ client requirements
 Accessed and installed software updates in accordance
with manufacturer’s recommendations and   
requirements
 Tested devices/ systems and/ or installation to
  
determine whether it conforms to requirements
 Conducted stress test to ensure reliability of equipment
in accordance with manufacturer’s instructions and   
system requirements
 Followed 5S and 3Rs according to environmental
  
policies
 Forwarded documentation to appropriate personnel
and/ or authority in relation to the test in accordance   
with requirements
INSTRUCTION FOR DEMONSTRATION:
(FOR THE CANDIDATE)
Candidate’s JUAN A. DELA CRUZ
name:
Trainer’s name: ROSELYN B. OSORIO
QUALIFICATION: COMPUTER SYSTEMS SERVICING NCII
Title of INSTITUTIONAL ASSESSMENT
Assessment
Units of 1. Install and Configure Computer Systems
competency 2. Set-up Computer Networks
covered:
3. Set-up Computer Servers
4. Maintain and Repair Computer Systems and
Networks
Date of
assessment:
Time of
assessment:

PLEASE READ CAREFULLY:


1. The trainer will provide you the necessary supplies/materials,
tools/instruments and forms. Inform the Assessor if you intend to
use your own materials/supplies, tools and instrument.
2. The trainer will allow 15 minutes for you to familiarize yourself
with the resources to be used in this demonstration.
3. You are required to perform the following:
Given the necessary tools, equipment, supplies and materials, the
candidate is required to perform the following:
A) Follow OHS policies and procedures
B) Assembles computer hardware using different tools and
equipment
C) Create portable bootable devices
D) Install operating system and peripheral/ devices drivers
E) Install application software
F) Conduct test and documentation

4. Trainer may perform oral questioning of the candidate before or


after the performance of the tasks.
INSTRUCTION FOR DEMONSTRATION:
(FOR THE TRAINER)
Candidate’s JUAN DELA CRUZ
name:
Trainer’s name: ROSELYN B. OSORIO
QUALIFICATION: COMPUTER SYSTEMS SERVICING NC II
Title of INSTITUTIONAL ASSESSMENT
Assessment
Units of 1. Install and Configure Computer Systems
competency 2. Set-up Computer Networks
covered:
3. Set-up Computer Servers
4. Maintain and Repair Computer Systems and
Networks

PLEASE READ CAREFULLY AND PREPARE AS NECESSARY:


1) The Assessor will:
a. Provide for the necessary tools, equipment, supplies and materials.
(Please refer to List of Tools, Materials and Equipment). In cases
wherein the candidate intends to use his/her own
materials/supplies, tools and instrument, the Assessor must check
the appropriateness of the candidate’s own materials/supplies,
tools and instrument.
b. Set-up the demonstration area.
c. Provide the candidate copy of the Instruction for Demonstration For
Candidate.
d. Ensure that the candidate FULLY understands the instruction
before proceeding to the performance of the task.
e. Ensure demonstrations of tasks shall be performed according to
the given Instruction for candidate.
f. Allow 15 minutes for the candidate to familiarize him/her/self with
the resources to be used in this demonstration.
g. Ensure that the candidate is wearing appropriate personal
protective equipment before allowing him/her to proceed with the
task.
2) During the demonstration of skills, the Assessor will check using the
Demonstration Checklist if the candidate was able to perform the
tasks specified in the Demonstration Checklist:
3) The Trainer, based on the performance of the candidate should give
immediate feedback.

4) The Trainer should advise the Candidate on the next method of


assessment that he/she will undertake.

Das könnte Ihnen auch gefallen