Beruflich Dokumente
Kultur Dokumente
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/CRFAM/96500868/CR-10-3-A-FJ-A-E-HQQE.html
info@lenntech.com
tel. +31 152 610 900
fax. +31 152 616 289
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump
head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal
ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid
split coupling. Pipe connection is via combined DIN-JIS flanges.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump
head has a combined 1/2" priming plug and vent screw.
The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this
material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, and
the shape of the blades ensure a high efficiency.
The base is made of cast iron. The flanges and base are cast in one piece. The outlet side of the base
has a drain plug. The pump is secured to the foundation by four bolts through the base plate.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.
The motor is flange-mounted with tapped-hole flange (FT).
Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor has built-in thermal protection (PTO current and temperature sensors) in accordance with
IEC 60034-11 and requires no further motor protection. The protection reacts to both slow- and
quick-rising temperatures, e.g. constant overload and stalled conditions.
As the thermal protection incorporates automatic reset, the motor must be connected in a way which
ensures that the automatic reset cannot cause accidents.
Technical data
Controls:
Frequency converter: NONE
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technical:
Rated flow: 10 m³/h
Rated head: 21.9 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B
Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC
Installation:
Maximum ambient temperature: 40 °C
Electrical data:
Motor standard: IEC
Motor type: 90SB
Rated power - P2: 1.1 kW
Power (P2) required by pump: 1.1 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 220-230/240 V
Rated current: 7.40/6.70 A
Starting current: 390 %
Cos phi - power factor: 0.98/0.99
Rated speed: 2770 rpm
Motor efficiency at full load: 73-71 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 48 kg
Gross weight: 51 kg
Shipping volume: 0.094 m³
30
25 100
20 80
15 60
10 40
5 20
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
P NPSH
[W] [m]
1600 8
1400 P1 7
1200 6
1000 5
P2
800 4
600 3
400 2
200 1
0 0
39
130
1
4
x
1
x
3.5
1 X G 1/2
28
4 0.2
G 1/2 135
139
178
256
215
280
178
139
16 bar / -20 °C
178
Type of connection: DIN / JIS
Size of inlet connection: DN 40
1 1/2 inch
281
1 X G 1/2
Liquid:
Pumped liquid: Water
114
150
20
80
cos phi
0.8 8
eta
0.6 6
0.4 4
0.2 2
0.0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 P2 [kW]
n P1
[rpm] [kW]
P1
2800 1.6
n
2600 1.2
2400 0.8
2200 0.4
2000 0.0
13.5
x
150
4
114
114
215
256
39
20.2
x
20
18
x
4
G 1/2
130
178
178
280
139
1 X G 1/2
G 1/2
135
80
281 393
251a
251d
77
28
7
7a 17
301a 219
92 301a
11
92
9
51
11b
105
215a
100
215
49
18
66a
45
67
530a
530
215a 217
6
531a
531
534
534a
3 2 1
TM058200
Printed from Grundfos Product Centre [2018.06.003] 10/13
Exploded view ( TM057026 for MGE model H/I )
251d
251b
291
290
287
277a
287a 273b
293 502
277
252a 286
273a
273
266
275a
268
268a
289a
289
251a 288b
288
288a
252b
159e
150
152
151
157 156
156c
158
185
154
178
172
187
153 191
188
156d
156b
192
156c
159d