Beruflich Dokumente
Kultur Dokumente
Procedure
Preparation of work area Tools should be of good quality and adequate
for the job.
Familiarise yourself with the equipment you
are using and follow all warnings, cautions, Provide and use properly the right personal
safety messages and procedures before using protective equipment (eye protection). Use
this equipment. hearing protection for prolonged use of drill.
Follow all warnings, cautions, safety messages Wear proper apparel for the task. Loose
and procedures contained in this Work clothing, ties or jewellery can become caught
Instruction. in moving parts.
Insist on thorough and proper safety training Use
before using this equipment.
Operate tools according to the
If you are in doubt about the safe use of this manufacturers’ instructions.
equipment, ask the Host Employer for advice
Never force a tool as it may slip and cause an
before proceeding.
injury to the operator or other staff.
Notify the Host Employer if you notice anything
When using tools while on ladders, scaffolds or
that you consider hazardous with the
platforms, a carrying bag or container shall be
operation of this equipment.
used for tools not being used.
Set up of equipment
Keep all people not involved with the work at
Use the right tool for the job. If unsure what is a safe distance from the work area.
the right tool, ask.
Secure work with clamps or a vice where
Examine each tool for damage before use possible, to free both hands to operate the
and do not use damaged tools. tool to avoid wrist strain.
Work Instructions
© 2018 Page: 1 of 2
Version: 1.0 Date: July 2018
ADDRESS: 26 / 8 Metroplex Ave MURARRIE, QLD 4172
Be sure to keep good footing and maintain Keep three points of contact with a ladder to
good balance when operating power tools. avoid falling.
Some power tools are fitted with guards and Shut down / Pack down
safety switches. Safety guards must never be
Racks, shelves, or tools boxes shall be
removed when a tool is being used.
provided for storing tools when not in use.
Use ladders and platforms built to Australian
Standards.
Work Instructions
© 2018 Page: 2 of 2
Version: 1.0 Date: July 2018