______1. Sprinkler A. used for spraying insecticides, foliar fertilizers,
fungicides and herbicides ______2. Knife B. used for hauling water, manure and fertilizers ______3. Hand Fork C. used for watering seedlings ______4. Bolo D. used for cutting planting materials ______5. Rake E. used for leveling the top soil ______6. Shovel F. used for removing trash, digging loose soil, moving soil from one place to another. ______7. Pruning Shear G. used for cutting bigger size post ______8. Sprayer H. used for cutting branches of planting materials ______9. Pail I. used for inter-row cultivation ______10. Axe J. used for cutting tall grasses and weeds and chopping branches of trees.
TRUE OR FALSE: Read and analyze each statement below. Write True if the statement is correct; False if the statement is incorrect on the space provided for.
_________1. It is not advisable to use the stone in a stabilized way.
_________2. Tools that are worn out should be separated and be fixed immediately to avoid accident. _________3. When sharpening, try to maintain the original factory bevel or angle _________4. Always push the file across the blade in a motion away from your body _________5. Clean accumulated rust and dirt off all metal surfaces with paint. _________6. Move the file diagonally, so that its cutting teeth are biting into the metal on the tool. _________ 7. Use medium-grit sandpaper to remove rust on larger tools such as shovels, spades, and hoes. ________ _8. When sharpening with a file, use oil. __________9. Oil helps tool to work as intended and will prevent the formation of rust. __________10. For pruners, use a whetstone because it produces a very sharp cutting edge. CARPENTRY Directions: Supply what is defined or described. Write your answer on your answer sheet. ________________1. It is a thin cross laminated sheet of wood. ________________2. This is made of metal used for fastening. _________________3. It is a powdered substance mixed with water. ________________4. It is a fine, dry, gritty substance mixed with water. _________________5. It is a sawn timber. _________________6. It is used for measuring long distances. _________________7. It is used for driving and pulling out nails. _________________8. It is a tool used for cutting along the grain. _________________9. It is used for vertical alignment. _________________10. It is a tool used to test the squareness of a stock. DIRECTIONS: Fill out the parts of a requisition slip.