Beruflich Dokumente
Kultur Dokumente
AIR-CONDITIONING UNITS
Tender No. VU/19-20/08/394
This tender will be received and opened on August 27, 2019 at 03:00 pm in the office of Director
Finance VU, M.A Jinnah Campus, Defence Road, off Raiwind Road, Lahore.
Address: ________________________________________________________________
Please attach all relevant documents marked with (*), technical specification of quoted
equipment otherwise your bid will not be entertained.
General:
1. Tender will be opened on given date. In case of holiday on given tender opening date, same
will be opened on next working day.
2. Tender must accompanied with a Pay Order / Demand Draft amounting to Rs. 1,000/- (non-
refundable) as tender fee favouring Virtual University of Pakistan. Tender Fee can be deposited
in any branch of Habib Bank Limited in Account No. 08667900089503 of Virtual University of
Pakistan. Original deposit slip must be attached with the bid. Tender without tender fee shall
not be accepted. Cheques shall not be acceptable.
3. Tender should be addressed to the Director Finance, Virtual University of Pakistan.
4. Tender document duly completed should reach the Procurement Department, Directorate of
Finance, Virtual University of Pakistan, not later than 02:30 pm on August 27, 2019. Late
Tenders will not be entertained. No telegraphic or faxed bid will be accepted. Bids will be
opened at 03:00 pm on the same date in the office of the Director Finance, Virtual University
of Pakistan, Lahore in the presence of bidders or their authorized representatives who may
choose to attend.
5. VU takes no responsibility for delay, loss or non-receipt of bids sent by post/courier.
6. Original Tender Document, along-with item specifications must be attached. (*)
Page 1 of 12
7. The bidder should quote their rates clearly on the tender document for each item in figures and
words. The rate shall be valid for a period of 06 months from the date of opening of tender. Bid
validity for a shorter period will be treated as non-responsive. (*)
8. GST should be exclusively / separately indicated in the bill/invoice and tender document.
9. The bidder must submit a current/valid certificate of authorized dealership/distributorship issued
by the principal/manufacturer of the quoted items. (*)
10. The Bidder will furnish, as part of its bid, a bid security (earnest money), equal to 5% of
maximum bid price inclusive of all taxes (Total of all Units Basis) in shape of DD/PO/CDR
only (Cheques shall not be accepted). The bid security is refundable to the unsuccessful
bidders after finalization of the tender. Bid security of successful bidder will be retained till
expiry of the Warranty period of supplied items. (*)
11. VU has the right to increase / decrease the units at the time of issuance of Purchase Order(s).
VU also has the right to place order in parts during the bid validity period.
12. VU has the right to enquire about the available stocks with the vendor, if required at any stage
during the bid validity.
13. All Items must be delivered within 03 weeks from the date of issuance of purchase order at the
sites mentioned in purchase order. Penalty @ 2(Two) % per month or a part thereof, of the
value of goods not delivered in time will be imposed.
14. The bidder will deliver the items at VU Head Office Lahore and VU Own Campuses spread all
over Pakistan at his own expenses. Delivery & Installation at site will be responsibility of bidder.
15. Please attach latest Financial Soundness Certificate issued by your bank, having business
affairs for at least last three years. (*)
16. The bidder must submit an affidavit on Rs.100 stamp paper that the firm/company is not black
listed from any Government/Semi-Government/Non-Government organization as per sample at
Annex-B. (*)
17. The bidder must submit the list of Directors/Partners/Owners along with the bid. (*)
18. The bidder must be a registered tax payer with FBR on Active Tax Payer List (ATL) and
certificate must be attached for NTN and GST. (If GST is exempted, please provide necessary
evidence). (*)
19. Copies of last tax returns of Income Tax (Yearly) and GST (Monthly) must be attached with the
bid. (*)
20. Income tax will be deducted as per Government rules.
21. The Payment will be made in accordance with SRO 660(I) 2007 on submission of GST Invoice.
22. Virtual University of Pakistan reserves the right to reject any tender without assigning any
reason or accept the whole or part of tender (as per PPRA rules)
Technical:
1. The item, which will be supplied, should conform to the standard specifications.
2. The quoted model should be running satisfactorily in the local market for the last two years at
least (client list required with contact information). (*)
3. A standard installation kit including the copper refrigerant piping SWG 22, appropriate size of
control & supply cables (Outdoor unit to Indoor unit) according to unit capacity will be provided
within the unit cost. However, the length of refrigerant piping not less than 10 RFT (3 meter) for
all wall mounted AC unit capacities & 13 ft (4.0 meter) for Floor standing AC units.
4. The bidder should provide warranty (ies) as mentioned in technical portion (under warranty
column) for each model i.e. installation & commissioning work, unit parts & compressor.
Installation & commissioning including the copper piping, control wiring, gas charging, leak
detect, drain piping & satisfactory operation of unit/s. (*)
Page 2 of 12
5. The bidder should provide Comprehensive on-site warranty including the service with parts for
complete unit for 1 year and minimum 3 years compressor warranty for standard units and 10
years for Inverter after date of delivery. In case of any major breakdown i.e. Compressor
failure or damage to coils, bidder must provide the replacement of faulty parts free of any cost
while the warranty clauses shall remain intact.
6. The bidder should be required to provide a warranty that equipment supplied shall be free from
defects in all respects.
7. The bidder should have service centers at all majors’ cities of all provinces. (*)
8. The bidder must have qualified staff and office/workshop in order to ensure timely
repair/maintenance after sales & expiry of warranty of the supplied equipment. (*)
9. No Visit charges will be paid during the warranty period of supplied equipment.
10. The bidder should mention the rates of extra material / items quoted at Annex-A. (*)
Procurement Department
Directorate of Finance
Virtual University of Pakistan
M.A Jinnah Campus,
Defence Road, off Raiwind Road, Lahore
UAN: 042-111-880-880 Ext 333 / 287
EVALUATION CRITERIA:
Page 3 of 12
SUMMARY OF FINANCIAL QUOTE
Origin
Indoor
unit
Model
Outdoor
unit
Unit Cost
Govt. Tax
Installation Charges
Unit Costs
Page 4 of 12
TECHNICAL SPECIFICATION:
Unit Description
Full DC inverter type Air-conditioner (1.0 T.R), R-410a Dual Mode, Wall mounted air cooled with Cordless remote
system with Rotary/ scroll compressor, Corrosive atmosphere friendly coils and fins, automatic operation & auto
restart function, auto diagnostic system.
Technical Specifications:
(Please mention all the required details (specification/compliance) in the spaces provided otherwise bid will not
be entertained).
Indoor Unit
Unit Model
Outdoor Unit
Inverter Technology Full DC Inverter
Cooling Capacity Nominal > 11000 Btu/Hr
Variable 5000 ~13000 Btu/Hr
Nominal Heating Capacity Btu/Hr > 13000 Btu/Hr
Power Source AC Volts, Single Phase 170 -240
AC
Page 5 of 12
(II) DC INVERTER 1.5 T.R
Unit Description
Full DC inverter type Air-conditioner (1.5 T.R), R-410a Dual Mode, Wall mounted air cooled with Cordless remote
system with Rotary/ scroll compressor, Corrosive atmosphere friendly coils and fins, automatic operation & auto
restart function, auto diagnostic system.
Technical Specifications:
(Please mention all the required details (specification/compliance) in the spaces provided otherwise bid will not
be entertained).
Indoor Unit
Unit Model
Outdoor Unit
Inverter Technology Full DC Inverter
Cooling Capacity Nominal > 17000 Btu/Hr
Variable 6000 ~20000 Btu/Hr
Nominal Heating Capacity Btu/Hr > 19000 Btu/Hr
Power Source AC Volts, Single Phase 170 -240
AC
Page 6 of 12
(III) DC INVERTER 2.0 T.R
Unit Description
Full DC inverter type Air-conditioner (2.0 T.R), R-410a Dual Mode, Wall mounted air cooled with Cordless remote
system with Rotary/ scroll compressor, Corrosive atmosphere friendly coils and fins, automatic operation & auto
restart function, auto diagnostic system.
Technical Specifications:
(Please mention all the required details (specification/compliance) in the spaces provided otherwise bid will not
be entertained).
Indoor Unit
Unit Model
Outdoor Unit
Inverter Technology Full DC Inverter
Cooling Capacity Nominal > 22000 Btu/Hr
Variable 9000 ~25000 Btu/Hr
Nominal Heating Capacity Btu/Hr > 25000 Btu/Hr
Power Source AC Volts, Single Phase 170 -240
AC
Page 7 of 12
(IV) INVERTER CASSETTE TYPE 1.5 T.R
Unit Description
Air Conditioner (1.5 T.R) R-410a type with Cordless remote system, Air cooled Split cassette type preferable
indoor size 2’ x 2’ with Rotary / Scroll compressor, corrosive atmosphere friendly, hydrophilic aluminum fins and
coils, auto swing, automatic operation & auto restart function.
Technical Specifications:
(Please mention all the required details (specification/compliance) in the spaces provided otherwise bid will not
be entertained).
Indoor Unit
Unit Model
Outdoor Unit
Inverter Technology Full DC Inverter
Cooling Capacity Nominal > 17000 Btu/Hr
Variable 6000 ~20000 Btu/Hr
Nominal Heating Capacity Btu/Hr > 19000 Btu/Hr
Power Source AC Volts, Single Phase 170 -240
AC
Page 8 of 12
(V) INVERTER Type 4.0 TR Floor Standing
Unit Description
Inverter type Air-conditioner (4.0 T.R), R-410a Dual Mode, Floor Standing air cooled with Cordless remote system
with Rotary/ scroll compressor, Corrosive atmosphere friendly coils and fins, a automatic operation & auto restart
function(auto restart after power failure) with safeties of phase failure, low pressure switch, ambient temperature
controller
Technical Specifications:
(Please mention all the required details (specification/compliance) in the spaces provided otherwise bid will not
be entertained).
Indoor Unit
Unit Model
Outdoor Unit
Inverter Technology DC Inverter Type
Cooling Capacity Nominal > 48000 Btu/Hr
Variable 30000 ~52000 Btu/Hr
Nominal Heating Capacity Btu/Hr > 50000 Btu/Hr
Power Source Three Phase 380 AC, 50 Hz
Page 9 of 12
(VI) AIR CONDITIONER FLOOR STANDING 4.0 TON
Unit Description
Air Conditioner (4.0 Ton) R-22 type with Cordless remote system, Air cooled Split floor standing type with Rotary /
Scroll compressor, hydrophilic aluminum fins, auto swing, automatic operation & auto restart function(auto restart
after power failure) with safeties of phase failure, low pressure switch, ambient temperature controller
Technical Specifications:
(Please mention all the required details (specification/compliance) in the spaces provided otherwise bid will not
be entertained).
Indoor Unit
Unit Model
Outdoor Unit
Btu/Hr : > 48000
Nominal Cooling Capacity
Watt > 14000
Power Source AC Volts, single Phase
Page 10 of 12
Annex-A
1 Extra Copper Refrigerant piping of 22 SWG with insulation & appropriate size
control wire according to the unit capacity complete with all respect (If RFT
required) for all mentioned capacities of 1.0 & 1.5 TR units
2 Extra Copper Refrigerant piping of 22 SWG with insulation & appropriate size
control wire according to the unit capacity complete with all respect (If RFT
required) for all mentioned capacities of 2.0 TR units
3 Extra Copper Refrigerant piping of 22 SWG with insulation & appropriate size
control wire according to the unit capacity, complete with all respect (If RFT
required) for all mentioned capacities of 4.0 TR units
4 Supply & installation of Angle Iron Frames (if required) for all mentioned No
capacities of 1.0 to 2.0 TR units.
5 Supply & installation Angle Iron Frames (if required) for outdoors of all No
mentioned capacities of 4.0 TR units.
6 Supply & installation Angle Iron Frames (if required) for indoor unit of all No
mentioned capacities of 4.0 TR units.
7 Dismantling Charge (if required) for 1.0 TR to 2.0 TR capacities units No
10 Installation charges (other than supplied equipment) for 2.0 TR capacities units No
11 Installation charges (other than supplied equipment) for 4.0 TR capacities units No
12 Drain Piping of UPVC ¾” including fitting (if required) complete with all RFT
respected
13 Supply & installation of PVC Duct 60mm x 60mm for copper piping/drain (if RFT
required)
Page 11 of 12
Annex-B
I further confirmed that the firm/company is not black listed by any of the government departments.
Name: ______________________
Designation: _________________
Page 12 of 12