Sie sind auf Seite 1von 7

CWS-3050 Data Sheet:

Models: CWS-3050-01, CWS-3050-02, CWS-3050-03, CWS-3050-04, CWS-3050-05, CWS-3050-06, CWS-3050-


07, CWS-3050-08, CWS-3050-12, CWS-3050-13, CWS-3050-14, CWS-3050-17, CWS-3050-20, CWS-3050-28,
CWS-3050-40, CWS-3050-41, CWS-3050-66a

Overview
The Converged Wireless System (CWS) CWS-3050 is the latest models in the
CWS-3000 series (2x40W). CWS is a software-defined, multi-technology, multi-
CWS-3050 carrier base station product family that integrates baseband, radio, filter/power
amplifier, edge aggregation, and backhaul router into a single compact form factor
device. For common bands across 2G, 3G, and 4G, (such as Band 8), CWS supports
Multi-mode (2G, 3G,
all three Radio Access Technologies (RATs) in the same form factor. The band is
4G) multi-band base
indicated in the last two digits of the model (ex. CWS-3050-08). The CWS-3050
station with integrated can utilize any type of preferred external antenna via a 4.3-10 low PIM connector.
flexible backhaul
The compact all-in-one design approach helps to achieve the right level of system
Key Features
capabilities and attractive economics for service providers to deliver variants for a
• 3GPP compliant wide variety of deployments with the extremely low cost per unit coverage ratio. It
• SON-based supports many worldwide 3GPP frequency bands. The innovative design results in
interference the following benefits:
mitigation
• Self-configuring, self- • Larger coverage area with one base station
optimizing, and self- • A true wireless broadband level of service enablement for the subscribers
managing via HetNet with more data throughput
Gateway • Improved uplink performance by installing a unit close to the antenna to:
reduce cable loss, maximize power efficiency, and minimize interference
Key Benefits • Compact size and light weight results in CAPEX savings by outdoor
• Cost-effective, installation near antenna and OPEX savings with easy cell planning and
resilient coverage optimization by the Parallel Wireless HetNet Gateway (HNG).
outdoors
CWS-3050-x is auto-configured and managed by the HNG. This allow the CWS to
• Lower overall TCO
be deployed and maintained without any need for specialized staff or training. The
• Flexibility in
HNG makes the CWS nodes self-configurable, self-optimizing via real-time SON
deployment: fewer
sites; sites that can on HNG, and also provides resilience and self-healing with dynamic re-routing,
support multiple and enables backhaul meshing between the nodes using licensed or unlicensed
sectors spectrum. SON on the HNG actively manages and monitors CWS’. This ensures
that they are not disruptive to the rest of the Macro network, that proper power
control is maintained between systems and guarantees other users in the same
geographical area are not adversely affected. This improves the overall network performance towards a
higher customer QoE (Quality of Experience).

Parallel Wireless, Inc. Proprietary and Confidential


CWS-3050-ds-20180118-12-sanitized
The CWS supports 3G/UMTS and 4G/LTE resulting in fewer sites due to the support of multiple
technologies/dual carrier capabilities on the same hardware, which helps drive the overall deployment costs
down. This also provides carriers with a migration path while they deploy VoLTE, enabling a Circuit
Switch Fall Back (CSFB) solution for customers and emergency calling. Each unit can support two carrier
per baseband: either 2G/2G, 2G/4G, 3G/3G, 4G/3G or 4G/4G of similar bands. These capabilities are
software adjustable and help to achieve better resource utilization and spectrum efficiency by means of
joint resource allocation and load balancing across the downlink carriers. Each CWS-3050 is capable of
2x2 MIMO operation for 4G that helps with capacity improvement in the network. 2T2R 4G capability will
allow CWS to transmit a maximum RF power of 40W (46dBm) simultaneously on each antenna for the
total of 80W (49dBm) RF output power from a single CWS-3000 family unit. If it operates as a 3G
(1T2R)/4G (2T2R) dual carrier, it will transmit 40W (46dBm) split between 3G and 4G on the first transmit
port and additionally, up to 40W (46dBm) of 4G on the second transmit port. CWS-3050 will provide total
of 40W RF output operating in 3G mode only (1T2R). If it operates as a 2G only (4TRx; 8TRx in the next
release), it will transmit 40W (46dBm) maximum output to reach up to 25 km. If it operates as a 2G
(4TRx)/4G (1TRx) it will transmit 80W (46dBm) maximum output.

Figure 1. CWS-3050 Figure 2. CWS-3050 connectors

Wi-Fi can be supported via any Wi-Fi AP connected via PoE connector.

The CWS hardware connectors allow for different backhaul input (fixed, Ethernet, satellite, wireless).
CWS backhaul capabilities can be enhanced with wireless mesh by simply connecting a wireless mesh
backhaul module (BHM) via a standard RJ45/Ethernet interface/Ethernet cable. Multiple CWS’ can daisy
chain to each other to form a mesh cluster which eliminates the need/cost for other types of backhaul.

BHM-201 has two radios (to support multiple mesh networks, or a mesh network plus an LTE-backhaul
connection) and external N-type connectors to allow mobile operators to choose their preferred antennas.

Parallel Wireless, Inc. Proprietary and Confidential


CWS-3050-ds-20180118-12-sanitized
The mesh radio supports all 5GHz bands commonly used in the US, Europe, and Asia and the maximum
outdoor EIRP for each region.

Deployment Scenarios for BHM-201:

• Multiple radios deployment (ex: one LTE and one Mesh)


• Usage of own antenna
• Metal housing preference to the plastic

LTE backhaul is enabled by a commercial UE and can operate on any


commercial LTE band. Figure 3. Wireless Backhaul module (BHM)

CWS

BHM

Figure 4. Integration example with outdoor CWS

CWS-3050 Key Features and Capabilities

• 2G (Band 8), 3G, 4G/LTE


• Flexible backhaul input: Fiber, Ethernet, LTE, 3G, satellite, wireless mesh
• Wireless backhaul via a backhaul module for multi-point-to-multi-point wireless mesh
• 3GPP compliant across all components
• 3GPP compliant “Plug-n- Play” security
• SON-based interference mitigation and power adjustments
• Carrier-grade hardware
• Low power consumption to deliver OPEX savings
• Software-enabled remote diagnostic to detect, monitor, and alarm
• Radio configurations deployment flexibility
• Support of any Wi-Fi AP, external cameras or other devices via PoE connector
• AISG 2.0 compliant

CWS Benefits Include:

• Covers the majority of cellular 3G and 4G bands ensuring that there is a solution available for
any outdoor deployment situation

Parallel Wireless, Inc. Proprietary and Confidential


CWS-3050-ds-20180118-12-sanitized
• Overall TCO reduction:
o Significant reduction in OPEX/maintenance costs:
▪ Lower power consumption
▪ Lower wind load and volume, no cabinet underneath reduce any site rental fees
on the tower or on the ground
o Reduces planning challenges/site acquisition requirements and time to acquire a site
o Low skill labor and easy to install as HetNet Gateway manages the configuration
o Reduces impact of equipment on building or a pole
o No cabinet, no cooling required
o Increases deployability
• Compatible with any type of antenna (omni, panel, multi-band)
• Future-proof for additional deployment to boost power, or to increase MIMO and enable
diversity
• Future-proof for bands reconfigurations and neutral-host enabler
• Seamless handoffs and mobility management via HNG for voice and data for QoS and better
subscriber experience

Deployment Options

CWS-3050-x, an outdoor product series node, can be attached to


any street or rooftop furniture. Recommended applications:

• To improve outdoor coverage in coverage not-spots and


add capacity in high density urban environments
• To provide low-cost coverage in rural areas
• For general-purpose rugged outdoor wireless LAN and
venues

Figure 5. CWS-3050 with sun guard and mounting brackets

CWS-3050 Specifications at a Glance:

Architecture High-capacity platform for cost-effective, resilient coverage


Virtualized design; functions based on software are not coupled to hardware:
• Self-configuring
Flexibility • Self-optimizing
• Self-healing
• Multi-radio backhaul mesh
• FDD or TDD variant
Band Combinations • Both FDD and TDD support at the same time will depend on frequency
requirement
• 2G/GSM (Band 8)
Air Interface • 3G/UMTS
• 4G/LTE
Supported Operating Bands Major LTE and UMTS bands are supported

Parallel Wireless, Inc. Proprietary and Confidential


CWS-3050-ds-20180118-12-sanitized
GSM/2G supported on Band 8 (see CWS-3050-08 data sheet)
Channel Bandwidth 5, 10, 20 MHz channel bandwidths
Wi-Fi AP Support of any Wi-Fi AP via PoE connection
Software Upgrade Available
Full hardware and software redundancy, hot swappable stand-by as well as high-
Resilience
availability software techniques
Interference management Fully automatic via HetNet Gateway
Antenna Any preferred external antenna.
Noise Sound Power Level Silent (no fans)
Operating Temperature -40 to +55C
Relative Humidity 95%, non-condensing
Protection level (IP) IP66
• Wall mount
• Pole mount
Mounting Options
• Rooftop mount
• CWS can be cabinet installed if required for aesthetics requirements
Screws Tamperproof, for security
LEDs One R,G,B LED
Venting Gore vent, or equivalent

Capabilities Specifications
Power level configurability 0dBm to +46 dBm, in 0.5dB increment
Power Stability +/- 0.5dB under all conditions
RF Frequency(MHz) Major bands are supported
2T2R for 4G with 2x40W output, 1T2R for 3G with 40W
RF output/ Number of TX/RX
output, 1T2R for 2G with 80W output
Power consumption 325W typical, 335 W max.
Input Voltage DC ( -40.5 V ~ -57 V)
Volume 220 mm x 373 mm x 164.2 mm (13.4 L)
Weight 14 kg (31 lbs)
Electrical and AISG (2.0) IEC 60130-9 - Ed. 3.0. 8-pin circular connector.
Mechanical 1xSFP for Gigabit Ethernet
Network Connectivity
1xRJ45 for local Ethernet (Supply PoE+, 30W)
C10-694780-02P (Amphenol)
DC Power Input connector 2-way 48 VDC Male Panel Receptacle
Mate: C10-694780-02S (Amphenol)
2.5dB @ room
Radio Noise figure
2.8dB @ over temp.
Antenna Connectors (2) N-type with option to build with (2)
Antenna Connectors
Antenna 4.3-10
GPS Antenna Connector N-type. Active, with +5VDC power

Parallel Wireless, Inc. Proprietary and Confidential


CWS-3050-ds-20180118-12-sanitized
CWS-3050/ Overall Compliance (in progress):

IP66
Weatherproof No ingress of dust; complete protection against contact (dust tight).
Water projected from any direction.
Altitude 3900m
EN 50385
EN 60950-1
Health & Safety
IEC 60950-1
EN 60950-22
General:
EN 301 489-1 Class B
EN 301 489-3 Class B
EN 301 489-50

RE (Radiated Emission):
EN55022

CE (Conducted Emission):
EN55022
EN55024

RI (Radiated Immunity):
EN61000-4-3

CI (Conducted Immunity):
EN61000-4-6
EMC
EFT (Electrical Fast Transient):
EN61000-4-4

ESD (Electrostatic Discharge):


EN61000-4-2

Surge:
EN61000-4-5
GR 1089

Voltage Dips and Interrupts :


EN61000-4-11

Harmonics:
EN61000-3-2

Flicker:
EN61000-3-3

Parallel Wireless, Inc. Proprietary and Confidential


CWS-3050-ds-20180118-12-sanitized
TS 25.141 Rel.11
3GPP TS 36.141 Rel.11
TS 37.141 Rel.11
EN 300 440
EN 301 908-1
RF/Radio
EN 301 908-3
EN 301 908-14
RoHS II Directive 2011/65/EU
Environmental WEEE Directive 2012-19-EU
REACH Regulation no. 1907/2006
GR3108
Defines environmental, mechanical and electrical testing criteria and provides design and
Vibration
performance requirements to help ensure that electronic equipment will operate reliably over
its expected lifetime
GR1089
Lightning Ensures telecommunications equipment contained the Electromagnetic Compatibility (EMC)
and electrical safety criteria necessary to perform safely and reliably.

For additional information about the Parallel Wireless CWS-3050 or CWS family of products, please e-
mail orders@parallelwireless.com.

Parallel Wireless, Inc. Proprietary and Confidential


CWS-3050-ds-20180118-12-sanitized

Das könnte Ihnen auch gefallen