Beruflich Dokumente
Kultur Dokumente
GS HIGHTECHER
Globe Valves
Angle Valves
Hose Valves
Swing Check Valves
Self Closing Parallel Cock Head VALVES
Self Closing Drain Valves
Emergency Shut Off Valves
H-type/ V-type Ejector
INTRODUCTION Contents
Since its establishment in 1992,
G.S HIGHTECHER Co., Ltd. has been specialized in manufacturing ship's Valve and
Fittings such as Bronze Casting Marine Valves, Air Vent Heads, Convex Couplings,
Expansion Joints, Pipe Couplings, Sea Chest Covers and Pipe Plugs for shipbuilding materials.
We have been continuously endeavoring to develop the equipment for Marine vessels.
We are NOT STAYING in the present, move forward into the FUTURE.
Sun-Bog PARK
CEO & Chairman
Introduction
BRIEF HISTORY Ceo’s Messageㆍ ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 02
Brief Historyㆍ ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 02
● Foundation
Factory and Productsㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 04
: Aug. 1992
● CAPITAL : USD 620,000
● Facility : Land : approx. 14,000m2, Factory : 5,000m2
Marine Bronze Valves
● Type Approval Class Certificates : ABS, BV, DNV, LR, NK, KR, RINA, RMRS Glove Valves ㆍ ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 06
● Major Customers : DSME, SAMSUNG, HYUNDAI, HANJIN, STX, SPP, DAESUN and other Domestic Shipbuilders Angle Valves ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 07
MHI, TSUNEISHI, SANOYAS, NAIKAI, IMABARI, EUROPE, ASIA, CHINA and etc. Hose Valves ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 08
Gate Valvesㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 10
1992 Aug. Established Youngnam Metal Co., Ltd.
Swing Check Valvesㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 11
2000 Dec. Obtained Major Class Certificates for Air Vent Head
(DNV, ABS, BV, LR, KR, BK, GL, RINA) Self Closing Parallel Cock Head ㆍ ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 12
Self Closing Drain Valves ㆍ ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 13
2001 Dec. Acquired BVQI ISO 9001-2000 Certifications
2002 Apr. Changed the company organization from Yougnam Metal to GS HIGHtecher Co., Ltd. Emergency Shut Off Valves ㆍ ㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍㆍ 14
FACTORY OFFICE
PRODUCT LINE
GS-01 GS-02 GS-03 GS-04 GS-05 GS-11 GS-12 GS-13 GS-14 GS-15
4 http://gshightecher.koreasme.com 5
GS HIGHTECHER Co., Ltd. Gate, Globe, Angle, Self Closing, Drain, Shut Off Valves and Ejectors of shipbuilding materials
⑩ ⑪
⑩ ⑪
⑨ ⑮
⑮
⑨
⑦ ⑥
⑦ ⑥
H
⑤ ⑭
⑤ ⑩
②
H
② ⑫
④ ④
⑫
⑬ ⑧ ⑬
PCD
⑧
D
③
PCD
① ③
D
①
L Screw Down Check (5K - 50A AND 65A) L Screw Down Check (5K - 50A AND 65A)
• Dimensions Table • Unit : mm • Material List • • Dimensions Table • Unit : mm • Material List •
FACE FLANGE HANDLE WEIGHT NO COMPONENT MATERIAL FACE FLANGE HANDLE WEIGHT NO COMPONENT MATERIAL
RATING SIZE TO BOLT HEIGHT 1 Body Bronze RATING SIZE TO BOLT HEIGHT 1 Body Bronze
FACE DIA PCD (DIA) (KG) FACE DIA PCD (DIA) (KG)
HOLE 2 Bonnet Bronze or Brass HOLE 2 Bonnet Bronze or Brass
15 100 80 60 4-12 130 80 2.02 3 Disc Bronze or Brass 15 50 80 60 4-12 120 80 1.98 3 Disc Bronze or Brass
20 110 85 65 4-12 140 100 2.86 4 Valve disc nut Brass 20 60 85 65 4-12 130 100 2.73 4 Valve disc nut Brass
25 120 95 75 4-12 160 125 3.54 5 Packing gland Brass 25 65 95 75 4-12 145 125 3.44 5 Packing gland Brass
5K 6 Gland nut Brass 5K 6 Gnand nut Brass
32 140 115 90 4-15 170 125 5.00 32 80 115 90 4-15 150 125 4.77
(F7301) (F7302)
7 Stem Brass 7 Stem Brass
40 160 120 95 4-15 190 140 6.48 40 85 120 95 4-15 165 140 5.99
8 Set screw Brass 8 Set screw Brass
50 210 130 105 4-15 235 140 11.70 50 100 130 105 4-15 200 140 10.10
9 Handwheel Cast lron 9 Handwheel Cast lron
65 250 155 130 4-15 260 160 17.00 65 115 155 130 4-15 220 160 15.60
10 Hexagon nut Brass 10 Hexagon nut Brass
15 110 95 70 4-15 130 80 2.76 15 70 95 70 4-15 120 80 2.73
11 Split pin Brass 11 Split pin Brass
20 120 100 75 4-15 140 100 3.72 12 Lock plate Brass 20 75 100 75 4-15 130 100 3.65
12 Lock plate Brass
16K 16K
25 130 125 90 4-19 160 125 5.20 13 Disc lock washer Brass 25 85 125 90 4-19 145 125 5.16 13 Disc lock washer Brass
(F7303) (F7304)
32 160 135 100 4-19 170 125 6.91 14 Packing Teflon 32 95 135 100 4-19 150 125 6.72 14 Packing Teflon
40 180 140 105 4-19 190 140 8.43 15 Name plate Brass 40 100 140 105 4-19 165 140 8.13 15 Name plate Brass
6 http://gshightecher.koreasme.com 7
GS HIGHTECHER Co., Ltd. Gate, Globe, Angle, Self Closing, Drain, Shut Off Valves and Ejectors of shipbuilding materials
Marine Bronze Hose Valves JIS F 7334 Marine Bronze Hose Valves JIS F 7334
• Globe Type 50A And 65A • • Angle Type 50A and 65A •
• Globe Type 15A And 25A • • Angle Type 15A and 25A • S (Between faces) S (Between faces)
13
⑩ 13 17 ⑩
⑦ 17
⑦ ⑥
② ⑥ ② ⑧
⑤ ⑤
⑪ S (Between faces) ⑪
S (Between faces) ⑪
⑮ ⑮ ⑪
⑩ ⑩ ⑨
⑮ ⑨ 16 ⑨ ⑮ ⑫
⑨ ④ ⑫ 16
⑦ 22 25
⑤ ⑭ ④
⑭ ⑥ 22 24 21
⑥ ⑤ ⑭
② 24
⑦ ② ⑭ 19
19
⑫ ⑫
③ 21
⑧ For nominal ⑧ For nominal
17 dia. 25
④ dia. 25 ④ 17 ① 23 Wire dia. 1mm
23 Wire dia. 1mm and over
⑬ ⑬ and over
20
18 20
③ ③ ①③ 25
① ①
18 Wire dia. 1mm
and over
18 Wire dia. 1mm • Fluid Condition & Max. Working Pressure(kgf/cm2) • • Hydraulic Test(kgf/cm2) •
and over
Rating 5K 10K
Fluid Condition RATING 5K 16K
Stem 2 2
SHEEL HYD'TEST 10.5 21
Oil and Pulsation Water 5 10
• Fluid Condition & Max. Working Pressure(kgf/cm2) • • Hydraulic Test(kgf/cm2) • Non Shock Water of 120℃
7 14 SEAT HYD'TEST 7.7 15.4
and Under
Rating 5K 10K
Fluid Condition RATING 5K 16K
• Material List •
Steam of 205℃ and Under 5 10
NO COMPONENT MATERIAL
BODY 10.5 21
Air, Pulsation Water 5 10
• Globe Type • 1 Body Bronze
2 Bonnet Bronze or Brass
FLANGE HANDLE WEIGHT
SEAT 7.7 15.4 3 Disc Bronze or Brass
Non Shock Water 7 14 RATING SIZE THREAD HEIGHT
BOLT 4 Disc nut Brass
DIA PCD (DIA) (KG)
HOLE 5 Packing gland Brass
5K 130 105 4-15 255 160 12.9 6 Stem Brass
• Globe Type • • Material List • 50 M64 x 2 7 Handwheel Cast Iron
10K 155 120 4-19 270 160 15.4
FLANGE HANDLE WEIGHT NO COMPONENT MATERIAL 8 Hexagon nut Brass
RATING SIZE THREAD BOLT HEIGHT 1 Body Bronze 5K 155 130 4-15 280 160 26.41 9 Hexagon nut Brass
DIA PCD 65 M80 x 2 10 Hexagon nut Brass
HOLE (DIA) (KG) 2 Bonnet Bronze or Brass
10K 175 140 4-19 295 200 27.8 11 Stud bolt Brass
5K 80 60 4-12 130 80 2.51 3 Disc Bronze or Brass
15 12 Stud bolt Brass
10K 95 70 4-15 130 80 2.76 4 Disc nut Brass
M42 x 2 5 Packing gland Brass 13 Split pin Brass
5K 95 75 4-12 160 125 3.55
25 6 Gland nut Brass 14 Disc lock washer Brass
10K 125 90 4-19 160 125 4.15
7 Stem Brass • Angle Type • 15 Packing Teflon
8 Set Screw Brass 16 Gasket Asbestos
FLANGE HANDLE WEIGHT
9 Handwheel Cast Iron 17 Name plate Brass or Al
• Angle Type • RATING SIZE THREAD
BOLT
HEIGHT
10 Hexagon nut Brass DIA PCD (DIA) (KG) 18 Base connection Bronze
FLANGE HANDLE WEIGHT 11 Split pin Brass
HOLE 19 Cap Bronze or Brass
RATING SIZE THREAD BOLT HEIGHT
DIA PCD 12 Bonnet lock plate Brass 5K 130 105 4-15 255 160 11.0 20 Coupling ring Bronze
HOLE (DIA) (KG) 50 M64 x 2
13 Disc lock washer Brass 21 Set ring Bronze
5K 80 60 4-12 120 80 2.41 10K 155 120 4-19 240 160 14.3
15 14 Packing Teflon 22 Set screw Brass
10K 95 70 4-15 120 80 2.72 23 Chain/Wire Brass/SUS
M42 x 2 15 Name plate Brass 5K 155 130 4-15 240 160 21.85
5K 95 75 4-12 145 125 3.44 17 Cap Bronze or Brass 65 M80 x 2 24 Gasket Rubber
25
10K 125 90 4-19 145 125 4.04 18 Chain SUS Wire 10K 175 140 4-19 255 200 23.0 25 Gasket Rubber
8 http://gshightecher.koreasme.com 9
GS HIGHTECHER Co., Ltd. Gate, Globe, Angle, Self Closing, Drain, Shut Off Valves and Ejectors of shipbuilding materials
5K Rising Stem Gate Valves JIS F 7367 Marine Bronze 5K Swing Check Valves JIS F 7371
Marine Bronze
10K Rising Stem Gate Valves JIS F 7368
⑥ ①
④
⑧ ⑨ ⑩ ⑬
⑥
⑤
• Hydraulic Test(kgf/cm2) •
⑦ ⑥ WORKING PRESSURE 5kg/cm2
⑤ ⑪ BODY 10.5
TEST
PRESSURE
SEAT 7.7 ~ 4
H
②
③ ⑥
④ • Material List •
① NO COMPONENT MATERIAL
• Dimensions Table • Unit : mm
1 Body Bronze
⑫
FACE FLANGE WEIGHT 2 Bonnet Bronze or Brass
RATING SIZE TO BOLT HEIGHT
PCD
DIA PCD
D
FACE HOLE (KG) 3 Disc Bronze or Brass
• Fluid Condition & Max. Working Pressure(kgf/cm2) • • Hydraulic Test(kgf/cm2) • Marine Bronze 5K Flanged Cocks JIS F 7381
Rating 5K 10K
Fluid Condition RATING 5K 16K Two way cock Three way cock Groove indicating the
direction of port
Steam of 205℃ and Under 5 10
BODY 10.5 21 Type L Type T
⑤ • Hydraulic Test(kgf/cm2) •
⑦
② ⑨
• Dimensions Table • Unit : mm • Material List • ③ ⑥ Watertight test for plug 5kgf/cm2
⑧ ④
FACE FLANGE HANDLE WEIGHT NO COMPONENT MATERIAL Hydraulic test for body 10kgf/cm2
①
RATING SIZE TO BOLT HEIGHT 1 Body Bronze
FACE DIA PCD (DIA) (KG)
HOLE
2 Bonnet Bronze or Brass • Material List •
15 90 80 60 4-12 175 80 2.29
3 Bonnet nut Bronze or Brass NO COMPONENT MATERIAL
20 100 85 65 4-12 200 80 2.98
4 Disc Brass 1 Body Bronze
5K
25 110 95 75 4-12 220 100 4.10 • Dimensions Table • Unit : mm
(F7367) 5 Packing gland Brass 2 Plug Bronze
32 130 115 90 4-15 250 100 5.79 FACE FLANGE WEIGHT(kg)
6 Packing gland nut Brass 3 Packing gland Brass
40 140 120 95 4-15 290 125 7.78 RATING SIZE TO BOLT HEIGHT
7 Stem Brass FACE DIA PCD TWO THREE 4 Seat ring Brass
HOLE
15 100 95 70 4-15 175 80 2.96 8 Handwheel Cast Iron 25 130 95 75 4-12 105 3.13 3.81 5 Handle Steel
20 110 100 75 4-15 200 80 3.89 9 Hexagon nut Brass 6 Stud Brass
32 160 115 90 4-15 125 5.02 6.13
10K 5K
25 120 125 90 4-19 220 100 5.82 10 Split pin Brass 7 Hexagon nut Brass
(F7368) 40 170 120 95 1-15 135 6.66 7.93
32 140 135 100 4-19 250 100 7.52 (F7381)
11 Packing Teflon 50 190 130 105 4-15 163 10.00 11.80 8 Packing Teflon
40 150 140 105 4-19 290 125 9.71 12 Name plate Copper, SUS304 65 220 155 130 4-15 201 16.70 19.00 9 Name plate Brass
10 http://gshightecher.koreasme.com 11
GS HIGHTECHER Co., Ltd. Gate, Globe, Angle, Self Closing, Drain, Shut Off Valves and Ejectors of shipbuilding materials
Self Closing Parallel Cock Heads for Short Sounding Pipe JIS F 3018 Self Closing Fuel Oil Tank Drain Valves JIS F 7398
12 http://gshightecher.koreasme.com 13
GS HIGHTECHER Co., Ltd. Gate, Globe, Angle, Self Closing, Drain, Shut Off Valves and Ejectors of shipbuilding materials
Fuel Oil Tank Emergency Shut Off Valves JIS F 7399 Marine Bronze Hose Connections and Fittings JIS F 7335
33 28 A TYPE A TYPE • Base Fitting 15A • • Base Fitting 25A • • Base Fitting 40A and 65A •
③ L
Nominal dia. 40 or less Nominal dia. 50 or more E
29
26 30 34 32 V Wire dia. 1mm and over
34 B ⑥ ① ⑨⑮ ② ⑭④ ⑩ ⑥ ③
24 19 35 E M42 x 2 Wire dia. 1mm and over
25 25 O M42 x 2 ④
⑩ R ⑧ Roretto
25 D B TYPE B TYPE
⑨ ⑤ Roretto
22 Y
39 P ①
23 ①
O
⑧ 31 T
38 37 S
② ⑮ 37 20 Y
20 I
40 ⑫ P L TYPE L TYPE
T
18 ⑬ E
21 27 36 I
⑥ ⑪ O
29 29
④ 34 34 N
⑤ 38
25 25
23 24
38 22 ⑨⑮⑭
1A 49 M M
•NT-TYPE(JIS B 2351) •
48 46 37 37 M42 x 2
1B 20 20 Size Cut Dia.(Cu tube)
27 27
Rubber hose ② ⑪ ③ Faster properly
Air connector 44 21 21
36 36
8 8
ØB
P
Air operated type Wire operated type
10 10
• Material List • Section of A-A Section of A-A
Material Material
Faster properly
NO Component Nominal dia. Nominal dia. Nominal dia. NO Component Nominal dia. Nominal dia. Nominal dia. ③ M42 x 2 Rubber hose
②
40 or less 50 and 65 80 or more 40 or less 50 and 65 80 or more
1A Body(A-Type) 27 Hexagon nut Steel 21 25 ① ②
1B Body(B-Type) Bronze Cast Steel (SC480) 28 Machine screw Steel
2 Bonnet 29 Split pin Brass
• International Shore Connections • • Rubber Hose Connection 15A • • Rubber Hose Connection 25A •
3 Hand wheel Cast iron (FC200) 30 Machine screw Steel
4 disc Bronze of Brass
Stainless (SC52)
31 Lock pin Steel Marine Bronze 20K Globe Valves JIS F 7388
5 Valve seat - 32 Set screw - Steel
6 Disc nut Brass Stainless (SC52) 33 Name plate Brass or Al
8 Bonnet bush - Bronze or Brass 34 Washer Steel
18 ⑭⑮
9 Packing gland Bronze 35 Bush - Brass
For bite type union
• Hydraulic Test(kgf/cm2) •
10 Stem Brass Stainless (SUS403) 36 Split pin Steel
11 Stud bolt 37 Set screw Steel WORKING PRESSURE 20kg/cm2
12 Stud bolt Steel 38 Grease nipple - ⑧
13 Hexagon nut 39 Packing Teflon ④ PLUG 42
TEST
15 Hexagon nut Brass 40 Gasket Non-asbestos ⑦ PRESSURE
⑥ BODY 30.8
18 Disc lock washer Brass Stainless 41 Cylinder BC6 ② 16
19 Bush for stem lift Brass 42 Piston C3604 For type U ⑤ 17 ⑬ ⑫ • Material List •
20 Operating spindle Steel Stainless 43 Cap C3604 ③
21 Lever Steel 44 Pin SS400 In case of ⑨ ⑩ NO COMPONENT MATERIAL
⑩ ⑨ 1B 1A
22 Spring Spring Steel 45 O-ring NBR Air Operated type 1 Body Bronze
23 Spring support 46 Split pin SWRM10 To be fitted 2 Bonnet Brass or Bronze
Bronze Steel
24 Stay 47 Set screw SS400 3 Bonnet nut Brass or Bronze
25 Support bush for stem Bronze Steel 48 Male Connector C3604 4 Stem Brass
26 Hexagon nut Steel 49 Hex Plug C3604 5 Seat ring Brass
⑪ ⑪ 6 Packing gland Brass
• Dimensions Table • Unit : mm 7 Gland nut Brass
WEIGHT(kg)
Size L ØD ØC n-Øh H ØD2 8 Handwheel Brass
A B
9 Union nut Brass
50 220 155 120 4-19 335 160 29 31 • Hydraulic Test(kgf/cm2) • • Dimensions Table • Unit : mm 10 Nipple for copper pipe Brass
65 270 175 140 4-19 395 180 37 39
Pipe out dia. Threads Height(Approx.) Lift Hand- Threads 11 Nipple for steel pipe Steel
80 300 185 150 8-19 420 180 43 46 RATING 10K Nominal
copper steel d d1 K D (fully operened) wheel 12 Union nut Brass or Bronze
100 350 210 175 8-19 510 224 72 75 dia.
pipe pipe d3 H I D2 D1 13 Sleeve Brass
125 420 250 210 8-23 570 250 103 110
BODY 7 6 8 10.5 6 8 M20x1.5 12 28 100 5.5 63 M27 x 2 14 Hexagon nut Brass
150 490 280 240 8-23 660 280 140 150
200 570 33 290 12-23 780 315 220 240 15 Split pin Brass
6 10 10.5 6 8 M20x1.5 12 28 100 5.5 63 M27 x 2
250 740 400 355 12-25 850 355 350 375 SEAT 2 16 Packing Teflon
300 840 445 400 16-25 980 450 510 545 10 15 17.3 10 40 M24x2.0 16 34 115 7.5 80 M30 x 2 18 Name plate Brass
14 http://gshightecher.koreasme.com 15
GS HIGHTECHER Co., Ltd. Gate, Globe, Angle, Self Closing, Drain, Shut Off Valves and Ejectors of shipbuilding materials
55
55
Aq)
40
5mAq)
H
Head- -5m
B 35 Total Head =
35
Suction Head + Discharge Head
(SuctionHead
L (Meter Aq)
Head(Suction
ι 30
30
KW-H CONNECTIONS (mm) SUC. CAP. (m3/hr) DIMENSIONS (mm)
TYPE
SIZE NO. (ABOUT)
TotalHead
A B C L ι H 25
25
A C
Total
BC-ER-50 1½ x 2 x 2½ 40 50 65 13 480 105 100
BC-ER-200 6 x 8 x 10 150 200 250 230 1960 225 275 1.0 1.5 2.0 2.5 3.0 3.5 4.0
1.0 1.5 2.0 2.5 3.0 3.5 4.0
B C Flow Ratio = Driving Capacity
Flow Ratio = Driving
Suction Capacity
Capacity
Water & Crude Oil Ejector V-Type
Suction Capacity
H
A
2000
2000
L
ι RECOMMENDED SUCTION
1000
1000
900 AND DISCHARGE PIPE
900
800 305 (12)
800
700
305 (12)
mm inch SIZING FOR G.S.WATER
C 700 mm inch
B 600
600 EJECTOR
500 254 (10)
500 254 (10)
H
400
400
203 (8)
300 203 (8)
A 300 These curves can be referred
3/hr
3/hr
to preserve the fitting pipeline
FLOWRATEmm
200 153 (6)
200 153 (6) velocities as 0.3~3.0m/sec.
FLOWRATE
CONNECTIONS (mm) DIMENSIONS (mm)
Hd : Discharge Head in Meter Aq
KW-V SUC. CAP. (m3/hr) 127 (5)
TYPE 127 (5) HS : Suction Head in Meter Aq
SIZE NO. A B C (ABOUT) L ι H 100
100
90 Qd : Discharge Flowrates in
90
BC-ER-50 1½ x 2 x 2½ 40 50 65 13 580 115 120
80
80
70
102 (4)
102 (4) m3/hr = (Suction
70
60 Rates + Motive Rates)
BC-ER-80 2x3x3 50 80 80 30 750 130 125 60
50
50
76 (3)
BC-ER-100 3x4x4 80 100 100 60 840 105 150 40
40
76 (3)
30
BC-ER-125 4x5x5 100 125 125 80 1000 115 170 30 64 (2.5)
64 (2.5)
BC-ER-200C 6 x 8 x 10 150 200 250 300 1800 150 230 TOTAL HEAD METER
TOTAL HEAD METER
16 http://gshightecher.koreasme.com 17
GS HIGHTECHER Co., Ltd. Gate, Globe, Angle, Self Closing, Drain, Shut Off Valves and Ejectors of shipbuilding materials
d D t g c n h δ D t g c n h δ D t g c n h δ
15 89 12 35 60.3 4 16 M14 95 15 35 66.7 4 16 M14 95 15 35 66.7 4 16 M14
JIS 30kgf/cm2 JIS B2215-1976 JIS 40kgf/cm2 JIS B2216-1976 JIS 63kgf/cm2 JIS B2217-1976 20 98 13 43 69.9 4 16 M14 117 16 43 82.5 4 20 M16 117 16 43 82.5 4 20 M16
25 108 15 51 79.4 4 16 M14 124 18 51 88.9 4 20 M16 124 18 51 88.9 4 20 M16
d D t f g c n h δ d D t f g c n h δ d D t f g c n h δ 32 117 16 64 88.9 4 16 M14 133 20 64 98.4 4 20 M16 133 21 64 98.4 4 20 M16
40 127 18 73 98.4 4 16 M14 156 21 73 114.3 4 23 M20 156 23 73 114.3 4 23 M20
15 115 18 1 55 80 4 19 M16 15 115 20 1 55 80 4 19 M16 12 120 23 1 55 85 4 19 M16
50 152 20 92 120.6 4 20 M16 165 23 92 127.0 8 20 M16 165 26 92 127.0 8 20 M16
20 120 18 1 60 85 4 19 M16 20 120 20 1 60 85 4 19 M16 17 135 25 1 60 95 4 23 M20
65 178 23 105 139.7 4 20 M16 191 26 105 149.2 8 23 M20 191 29 105 149.2 8 23 M20
25 130 20 1 70 95 4 19 M16 25 130 22 1 70 95 4 19 M16 22 140 27 1 70 100 4 23 M20 80 191 24 127 152.4 4 20 M16 210 29 127 168.3 8 23 M20 210 32 127 168.3 8 23 M20
32 140 22 2 80 105 4 19 M16 32 140 24 2 80 105 4 19 M16 29 150 30 2 80 110 4 23 M20 100 229 24 157 190.5 8 20 M16 254 32 157 200.0 8 23 M20 254 35 157 200.0 8 26 M22
40 160 22 2 90 120 4 23 M20 38 160 24 2 90 120 4 23 M20 35 175 32 2 90 130 4 25 M22 125 254 24 186 215.9 8 23 M20 279 35 186 234.9 8 23 M20 279 39 186 234.9 8 26 M22
50 165 22 2 105 130 8 19 M16 50 165 26 2 105 130 8 19 M16 48 185 34 2 105 145 8 23 M20 150 279 26 216 241.3 8 23 M20 318 37 216 269.9 12 23 M20 318 42 216 269.9 12 26 M22
65 200 26 2 130 160 8 23 M20 62 200 30 2 130 160 8 23 M20 57 220 38 2 130 175 8 25 M22 200 343 29 270 298.4 8 23 M20 381 42 270 330.2 12 26 M22 381 48 270 330.2 12 30 M27
250 406 31 324 361.9 12 26 M22 445 48 324 387.3 16 30 M27 445 54 324 387.3 16 33 M30
80 210 28 2 140 170 8 23 M20 75 210 32 2 140 170 8 23 M20 73 230 40 2 140 185 8 25 M22
300 483 32 381 431.8 12 26 M22 520 51 381 450.8 16 33 M30 520 58 381 450.8 16 36 M33
100 240 32 2 160 195 8 25 M22 100 250 36 2 165 205 8 25 M22 98 270 44 2 165 220 8 27 M24
125 275 36 2 195 230 8 25 M22 120 300 40 2 200 250 8 27 M24 120 325 50 2 200 265 8 33 M30 ANSI CLASS 600 ANSI B16.5-1977 ANSI CLASS 900 ANSI B16.5-1977
150 325 38 2 235 275 12 27 M24 150 355 44 2 240 295 12 33 M30 146 365 54 2 240 305 12 33 M30
d D t g c n h δ d D t g c n h δ
200 370 42 2 280 320 12 27 M24 200 405 50 2 290 345 12 33 M30 190 425 60 2 290 360 12 33 M30
15 95 15 34 66.7 4 16 M14 13 121 23 35 82.5 4 23 M20
250 450 48 2 345 390 12 33 M30 245 475 56 2 355 410 12 33 M30 238 500 68 2 355 430 12 39 M36
20 117 16 43 82.5 4 20 M16 17 130 26 43 88.9 4 23 M20
300 515 52 3 405 450 16 33 M30 295 540 60 3 410 470 16 39 M36 283 560 77 3 410 485 16 39 M36
25 124 18 51 88.9 4 20 M16 22 149 29 51 101.6 4 26 M22
32 133 21 64 98.4 4 20 M16 29 159 29 64 111.1 4 26 M22
h h h h h
40 156 23 73 114.3 4 23 M20 35 178 32 73 123.8 4 30 M27
d d d d d
50 165 26 92 127.0 8 20 M16 48 216 39 92 165.1 8 26 M22
g g g g
65 191 29 105 149.2 8 23 M20 57 244 42 105 190.5 8 30 M27
4
1.6
1.6
C C C C C
D D D D D
80 210 32 127 168.3 8 23 M20 73 241 39 127 190.5 8 26 M22
n-S n-S n-S n-S n-S
100 273 39 157 215.9 8 26 M22 98 292 45 157 234.9 8 33 M30
5. 10. 16. ANSI 125 ANSI 150 250 400 125 330 45 186 266.7 8 30 M27 121 349 51 186 279.4 8 36 M33
JIS 20. 30. 40. 63K BRONZE FLANGES : ANSI 150 & 300 ANSI 300 600 150 356 48 216 292.1 12 30 M27 146 381 56 216 317.5 12 33 M30
ANSI 900
200 419 56 270 349.2 12 33 M30 191 470 64 270 393.7 12 39 M36
Unless otherwise specified flange facing finish shall not be serrated Concerning boltings (δ) used for those flanges shown below table 250 510 64 324 431.8 16 36 M33 238 545 70 324 469.9 16 39 M36
metric system screw threads shall be applied. 300 560 67 381 488.9 20 36 M33 283 610 80 381 533.4 20 39 M36
18 http://gshightecher.koreasme.com 19