Apcotex CB610 is Carboxylated Styrene-Butadiene Appearance Milky white pourable liquid
Latex designed for stiff unitary and secondary Synthetic anionic and backing, as well as non-thermoformable needle felt Emulsifying System nonionic backing. It is manufactured by employing state-of- Total Solids (%) 50.0 ± 1.0 the-art emulsion polymerization technology ensuring product consistency. APCOTEX CB 610 has a good pH at 25°C 8.5 ± 0.5 foam stability, which can be increased, if desired, by Brookfield Viscosity LVF small additions of a surface-active agent 20 - 150 (CPS) SP.2, 30 RPM at 25°C It is manufactured by employing state-of-the-art Surface Tension (Dynes/cm) at 40 ± 5.0 emulsion polymerization technology ensuring product 25°C consistency. Compatibility with fillers Excellent
Bactericide Present
APPLICATIONS/ADVANTAGES Antioxidant Present
Stiff unitary and secondary backing
Stiff handle to carpet STORAGE RECOMMENDATIONS Excellent heat aging resistance Low VOC and odour Store between temperatures of + 5°C and 40°C. Excellent filler acceptance and compound stability Keep containers closed when not in use. Good viscosity stability with normal Acrylate Self-life: Six month from data of manufacturing thickener provided stored under shade, away from direct heat and sunlight and well protected from freezing. SAFETY AND HANDLING Packing: Flexi/200 Kg HDPE Drums
General safety precautions such as
goggles, gloves and face shields should be used while handling. (Refer MSDS for detail information)