Beruflich Dokumente
Kultur Dokumente
Hello!
Agenda
• Digital Encoders
• IP Products
• Edge QAM & Single Mini-QAM Modulators
• Digital QAM Set-Top Boxes
• Optical Tx & Mini-Node
• Analog Modulators & Demodulators
• Satellite Multiswitches, Power Inserters & In-line Amps
• Emergency Alert System, RF Combiners & RF Amps
• Racks, Shelves, Power Strips, & Cooling System
• In-Line Equalizer, Attenuators, Hi-Pass Filter, Voltage Blocker, Voltage Isolator, Surge Protector
• Drop Directional Couplers, CATV Splitters, Satellite Splitters & Sub-Band Diplexers
• Hardline Passive
• Connectors & Adapters
• Meters and Tools
Digital Encoders
PD1000 – HD Encoder QAM/IP System
ISDB-Tb
ISDB-T
PD1000 – Features
• Clear HDMI, YPrPb or CVBS
Video/Audio Input Module
• SD/HD SDI Input Module
• HD/SD MPEG-2/4 H.264 Video
• MPEG1-LII, Dolby Digital
Stereo Creator
• QAM & IP (Optional) Outputs
• RTP/RTSP/UDP
• ISDB-T & ISDB-Tb Outputs
• Web Browser Control
• EAS Inputs
• Closed Captions
PD1000 – Application System
PD1000
Sat. Receivers
. .
. .
. .
. .
. .
TSMS-5/16RK
Sat. Receivers
To distribution system
Sat. Receivers
PD100 – Single Channel HD IP Encoder
Features:
• HDMI, YPbPr, or Analog Video Input
• HDMI Embedded, S/PDIF or Analog
Audio Input
• MPEG-2 or H.264 MPEG-4 Video
encoding
• MPEG-1 LII, AAC, AC3 Audio Encoding
• IP Output only
Applications:
• CATV, Hospitality, Security
• For 3 or less programs, lower cost than
PD1000 with IP
DirecTV COM2000 System – Channel Insertion
Control PC
AV Sources
. .
. .
. .
. .
. .
TSMS-5/16RK
Sat. Receivers
To distribution system
Sat. Receivers
PD6IP – SD IP Encoder
• Standard Definition only
• MPEG-2 Video / MPEG1-LII
or AC3 Audio
• 6 * Analog Video and Audio
input
• IP Output
– MPTS or 6 * SPTS
• Front Panel or Web Browser
Control
• Closed Captions Supported
IP Product
PDAQ-IP – ATSC & QAM IP Streamer (MPTS/SPTS)
Features:
• 8 ATSC/8VSB inputs
• 8 QAM/DVB-C inputs
• 2 ASI INPUTS
• 16-MPTS or 512-SPTS Outputs
• UDP and RTP/RTSP Protocols
• Unicast and Multicast
• PID Filtering, Re-Mapping (SPTS)
• Null PKT Filter Function (MPTS)
• Secure management/configuration via easy-to-
use web browser
PDAQ-IP – Application System
Local Off Air Channels
KJWP, KYW, WACP, WPVI, WCAU, WHYY, ATSC 8VSB Reception, Multiplexing & IP Output
WPHL,WNJS, WTXF, WYBE, W36DO, WPHACD,
WLVT, WMCN, WGTW, WTVE, WNJT, WPSG
18 Carriers – over 32 programs
PDAQP-IP 8 Carriers per chassis
8 * ATSC 8VSB RF IP
8 * ATSC 8VSB RF IP
8 * ATSC 8VSB RF IP
PD4D - Quad Digital Input MPEG4/2 Decoder
Features:
• ASI Input (MPTS)
• IP Input (4 * SPTS)
• 4 Decoders (HD/SD MPEG-2/4 H.264)
• MPEG1-LII or AC3 Audio
• Composite & Component Video
• Analog L&R Audio
• SD input => SD output
• HD input => HD Component & SD
Composite output (downconversion)
*Note 1: The PD4D does not support IGMP, therefore static multicast
routing needs to be configured on any switches to allow the multicast to
flow to the PD4D
*Note 2: The PD4D sends periodic gratuitous ARP, this may disturb
unicast IP video playout on a Windows PC
*Note 3: Each multicast IP stream should be on a separate multicast IP
address
PD4D - Application
EdgeQAM
Digital QAM
PDASI-IP
PD1000
PD4D – 4 Decodes per Chassis
PDAQ-IP Component HD Digital QAM
Ethernet Switch
SDQ6
PD4D – 4 Decodes per Chassis
IRD’s with IP Analog AV SD Digital QAM
Analog AV
PD4D – 4 Decodes per Chassis
PD1000-IP Analog Cable
Analog AV
PD4D – 4 Decodes per Chassis
Analog Cable
PDMUX – 2 Channel MUX IP Streamer
Features:
• IP Input (Up to 512 IP Streams)
• 2 ASI Outputs
• 2 IP MPTS Stream Outputs
• Internal Multiplexing
• Easy to Use Web Interface
• Stream grooming in Cable
Headends
• Null Packet Removal
• Stream Aggregation/Localization
• Extremely low cost IP multiplexer
PDMUX - Local Cable TV IP Grooming
IRD’s with IP Stream Grooming and Null Packet Removal
Satellite Feeds IP
IP
IP
IP
Encoders with IP
IP To Cable aggregation system :
1. Individual ASI
Video Feeds IP 2. Aggregate ASI
3. Individual IP
4. Aggregate IP
IP
ASI
ASI
ASI
PDASI-IP 8 * ASI inputs – 2 ASI & IP outs To Cable aggregation system :
Satellite Feeds ASI 2 * ASI 1. Individual ASI
2 *IP 2. Aggregate ASI
Encoders with ASI only 3. Individual IP
ASI
ASI 4. Aggregate IP
2 * ASI
Video Feeds ASI 2 *IP
Streams can be groomed to:
1. Remove excess null
Bandwidth
ASI 2. Remove unwanted programs
3. Change virtual channel info
Video Feeds ASI
PDXT8 – Transcoder 8-SD/4SD
• Real-time Transcoding of Multiple Digital Video Programs
• Audio Transcoding
PDXT8
PDAQ-IP IP MPEG2
PDXT8
Off-Air Antenna
Ethernet Switch
IP MPEG4
PDXT8
PDAQ-IP
PDXT8
miniCMTS200a - Features
• Supports 400 modems
– 250 3.0 & 150 2.0 or 400 2.0
• 16 Downstream QAM Channels
– 800 Mbps
– 87 to 1000 Mhz
• 4 Upstream QAM Channels
– 120 Mbps
– 5 to 65 Mhz
• QOS, Dynamic Load Balancing, BPI+
Security, and Upstream Scheduling (Best
Effort, UGS, UGS/AD).
• DHCP Relay
• 800 Mbps Downstream . 120 Mbps
Upstream
• RJ45 or SFP for Data
• Highly intuitive User Interface
Overview of DOCSIS
Internet
Ethernet
CMTS
Coax
HFC
Coax
CM CM CM
Ethernet
PC PC PC
Edge QAMs & Mini-QAM
IPQT-12 – Edge QAM 12-Channel / 48-Programs
• Accepts a GbE IP input from Technicolor COM100
systems and other clear or pre-encrypted sources
• Two RJ45 inputs support redundant IP input, dual
sourcing, or loop through
• Supports up to 12 QAM-RF channels form 50 to
1002MHz organized as 3 independent groups of 4
channels
• Provides a 10/100Base-T Ethernet port for
configuration, control and monitoring
• Integrated web server allows local or remote access
using standard PC internet browser and provides
simple, easy navigation of all IPQT-12 status and
setup parameters
• Highly integrated 1RU rack mount chassis with
support for external DC redundant power
• Includes EAS override support for clear QAM
programming (with third party EAS receivers)
IPQC – Edge QAM 12-Channel / 48-Programs
• Two Gigabit Ethernet ports and one 10/100 management
interface
• Up to 48 managed programs from either single-program MPEG-
TS streams (SPTS) or multiple-program MPEG-TS streams
(MPTS)
• Support for both multicast and unicast IP streams
• Automatic MPEG-PCR regeneration on managed programs
• Automatic PID remapping for conflict avoidance on managed
programs
• TSID/program number configuration for PAT/PMT generation
• Passthru mode allows external MUX/scrambler or large service
count for radio stations
• Bypass for external DVB-SI stream inclusion
• Simple password-protected Web interface for easy
configuration and monitoring
• Front-panel IP configuration and fault reporting for easy
configuration and maintenance
• Supports DHCP for automatic IP address acquisition
• Supports DVB-SDT (actual) local generation when there is no
external DVB-SI streamer (SPTS only)
• 12 high-quality QAM channels in Annex A/B (ITU-A, ITU-B)
• Three independently tunable blocks of four contiguous QAM
channels
• 50 MHz to 1002 MHz frequency range
• 6 MHz or 8 MHz channel size
IPQC32 – Edge QAM 32-Channel / 1024-Programs
• Supports up to 1024 channels of IP input over UDP, RTP
(MPTS/SPTS)
• Supports unicast and multicast, IGMP v2/v3
• Max 840 Mbps effective bit rate for every GbE input
• Supports remultiplexing and MPTS/SPTS multiplexing
• Supports up to 180 PIDs remapping per channel
• 32 QAM carrier outputs, adjustable frequency output
within 768 MHz
• Supports RS (204, 188) encoding
• Excellent RF performance, MER ≥ 40 dB
• Remote control and monitoring via an easy-to-use web
browser
• Modular design, 1RU chassis
• Simultaneous multiple encryption: four CA systems
supported
• Compliant to DVB-C (EN 300 429) and ITU-T J.83 Annex
A and B
• Supports DVB general scrambling system (ETR289),
Simulcrypt standards ETSI 101 197 and ETSI 103 197
• 2 GbE inputs, RJ-45 interface or SFP
PQM – Agile QAM Mini-Modulator ASI Input
• Professional quality Agile QAM Modulator
and Up-Converter
• Modular design allows 6 or 8 modulators in 2
RU
• Accepts DVB-ASI input
• RF output channels 2~135 (54~860MHz)
• Minimum 45 dBmV output level
• ANNEX B and Annex A support
• Supports fixed and auto clock mode
• QAM Modes Supported: 64, 128, 256
• Null packets stuffing and PCR corrections
provided
• Programmable by channel or frequency
• Loss of transport input stream alarm
• Built in CW Test mode
• Used with MPC-12, MPC-12R, or MPC-
16PS/CS (chassis and power supply)
QAM Set-Top Boxes
QAM Set-Top Boxes
• VMX1-1.1
– Clear QAM Systems
– MPEG-2/4 (H.264)
– HD & SD
– MPEG1-LII & AC3 Audio
– HDMI & CVBS output
– Single Tuner
– Verimatrix CAS
– Front Panel Display
– PVR via external USB Hard Drive
• VMX3-1.1
– Same as the VMX1-1.1
• 3-Tuner STB
Optical Tx & Mini-Node
PFT-* Optical Transmitter
• PFT-6, PFT-8, PFT-10, PFT-12, PFT-14
• 6dBm (4mW), 8dBm (7mW), 10dBm (10mW),
12dBm (16mW), 14dBm (26mW)
• Wide bandwidth! 54~860MHz, high-
performance single-mode 1310nm optical
fiber transmitter
• Supports analog and QAM digital
applications
• Optical power monitoring of input RF and
laser status
• RS232 port
• Manual or automatic gain controls RF input
level
• Input voltage between 90-260Vac
• Unit can be used for NTSC and PAL systems
• Front panel RF test port -20dB
• Low power consumption
PMN-1 – Mini-Indoor Optical NOde
• Integrated high linearity optical receiver and
transmitter for two-way operation
• Compact, 5” x 4” x 1.3” precision aluminum die-cast
case guarantees excellent mechanical integrity, ease
of installation and shielding effectiveness
• Bi-directional operation with forward bandwidth from
54~1000MHz (analog and digital) and reverse
bandwidth from 5~42MHz
• Wide optical input range (-6dBm to 3dBm) provides
excellent operation at low optical input levels
• Full 25dBmV typical RF output for superior C/N
performance
• Return loss guarantees excellent impedance match
across the frequency band with minimal reflection
and cross coupling between ports
• Optical power monitoring for optimal optical input and
output power range indication
• Calibrated 1V/mW optical input test point for signal
monitoring
• 12Vdc line powered with a wall mounted 120/240Vac
wall adaptor included
Analog Modulators &
Demodulators
Analog Headend
Satellite Multiswitch
Satellite Receiver
Channel Modulator
Channel Combiner
To distribution system
Launch Amplifier
MPCM45 – Fix Mini-Modulator
• 45 dBmV minimum output for a 66 dB in-
band carrier to noise ratio provides superior
picture quality
• 82 Channel frequency range 54 MHz to 550
MHz (CATV 2 to 13, A1 to A5, A to PPP)
• SAW (surface acoustic wave) filtered for
superior adjacent channel performance
enables drop-in channel expansion
• BTSC stereo compatible pre-emphasis
disable switch provides pass-through for
stereo signals
• Front panel access controls enables easy
setup
• Single-slot design allows up to 12 or 16 units
in MPC-12, MPC-12R and MPC-16PS/CS
chassis
• IRC and HRC offsets available for frequency
settings in systems using offset channels
• Compatible with most manufacturers' mini-
modulator chassis
MMA860 & MMA860S – Agile Mini-Modulator
• 135-Channel range 54-860MHz (CATV 2-135)
• >45dBmV min adjustable output for optimum carrier-
to-noise performance
• State-of-the-art digital phase-locked-loop (PLL)
design guarantees precise frequency locking for solid
drift-free operation
• Microprocessor control enables quick digital push-
button channel selection for ease of installation,
configuration, and improved system uptime
• SAW (surface acoustic wave) filtered for superior
adjacent channel performance enables drop-in
channel expansion
• In-band carrier-to-noise ratio >65dB ensures superior
picture quality
• Single-slot design allows up to 12 or 16 units in
MPC-12, MPC-12C, MPC-12R and MPC-16PS/CS
chassis
• Automatic selection of aeronautical offsets (12.5kHz,
25kHz) for trouble-free configuration
• Front panel access to controls enables easy setup
• Pre-emphasis defeat switch to enable stereo
operation (MMA860S)
• Push button selectable A/V ratio (13 or 15 dB)
(MMA860S)
MPCMA – Agile Mini-Modulator
• 45dBmV minimum output for a 63dB in-band carrier to
noise ratio provides superior picture quality
• 135 Channel frequency range 54~860MHz (CATV 2~135
A1~A5, A~ZZZ, 89~135, UHF 14~69)
• Agile microprocessor control enables quick digital push-
button channel selection for ease of installation,
configuration and improved system uptime
• SAW (surface acoustic wave) filtered for superior
adjacent channel performance enables drop-in channel
expansion
• BTC stereo compatible pre-emphasis disable switch
provides pass-through for stereo signals
• Three-digit LED display provides quick channel
identification
• Non-volatile memory ensures channel programming
remains after power loss
• IRC and HRC offsets available for frequency settings in
systems using offset channels
• Compatible with most manufacturers’ mini-modulator
chassis
• PAL option available for international operation
MPC-16PS/CS – 16-Slot Chassis Power Supply Combiner/Cooling System
• Switching power supply, 90 to 265 Vac for
installation flexibility and precise voltage
regulation preventing component damage
• 5 to 860 MHz Bandwidth high isolation
combiner provides spurious carrier rejection
minimizing undesired channel interaction
thereby reducing picture distortion
• High capacity blowers for superb cooling
ensuring system long term reliability
• Reduces dust buildup in rack and on
equipment
• High efficiency power supply, with two cooling
fans for long life performance
• Auxiliary AC outlet for convenience
• UL-approved switching power supply
provides flexibility for use in international
power system environments
PCM55SAW – Fixed Modulator
• 55 dBmV minimum output for a 64 dB in-band
carrier to noise ratio provides superior picture
quality
• 82 Channel frequency range 54 MHz to 550
MHz (CATV 2~13, A1~A5, A~PPP)
• SAW filtered IF for superior adjacent channel
performance enables drop-in channel expansion
• BTSC Stereo compatible pre-emphasis disable
switch provides pass-through for stereo signals
• Front panel controls and a convenient -30 ± 10
dbMv output test point
• IRC and HRC offsets available for frequency
settings in systems using offset channels
• Auxiliary AC outlet for convenience
• Optional PAL format channels available
• UL Approved
PFAM550SUB – Agile Dip-Switch Modulator
• 60dBmV MIinimum output for a 64dB in-band carrier to
noise ratio provides superior picture quality
• 89 Channel frequency range 5.75~550MHz (CATV
T7~13, 2~13, A1~A5, A~PPP) (PFAM550SUB)
• Sub-band operation enables remote TV origination,
making it ideal for institutional cable systems
• Front panel DIP switch-controlled phase-locked loop for
solid drift-free output on any channel
• SAW filtered for superior adjacent channel performance
enables drop-in channel expansion
• Front panel test point for easy RF level system monitoring
• Composite audio-video IF loop provides compatibility with
encoders, ghost cancelers and video-override
applications
• IRC and HRC offsets available allow for easy frequency
settings in systems using offset channels
• Double heterodyne conversion provides superior spurious
harmonic output suppression
• BTSC stereo compatible pre-emphasis disable switch
provides pass-through forstereo signals
• UL Approved
A860 & A860S – Agile Modulator
• Re-broadcast quality performance specifications match those of
fixed channel modulators
• Integrated BTSC Stereo (optional)
• 60dBmV minimum output for optimum carrier-to-noise
performance
• Precision SAW filter for superior adjacent channel performance
enables drop-in channel expansion
• State-of-the-art digital phase-locked loop (PLL) design
guarantees precise frequency locking for solid drift-free
operation
• Superior design including automatic band-splitting filters for
excellent carrier-to-noise ratio (>65dB)
• Bright LED bar graph provides simple modulation set-up
• Microprocessor tuning control provides digital display with push-
button channel selection for ease of installation, configuration
and servicing
• Rear panel interfaces accept baseband video and three audio
formats to provide maximum installation flexibility
• Composite and separate audio and video IF loops allow
compatibility with encoders, ghost cancellers and video override
applications
• MPX stereo loop provides encoded stereo input and
compatibility with Emergency Alert equipment
• IRC and HRC input and output offset available for frequency
setting in systems using offset channels
SVM860S – Agile Modulator
• Re-broadcast quality performance specifications match
those of fixed channel modulators
• Integrated BTSC Stereo & SAP (optional)
• 60 dBmV output for optimum carrier-to-noise performance
Precision SAW filter for superior adjacent channel
performance enables drop-in channel expansion
• State-of-the-art digital phase-locked loop (PLL) design
guarantees precise drift-free operation
• Superior design including automatic band-splitting filters
for excellent carrier-to-noise ratio >65 dB)
• Bright LED bar graph provides simple modulation set-up
separate video, audio left right
• Microprocessor tuning control provides digital display with
push-button channel selection for ease of installation,
configuration and servicing
• Rear panel interfaces accept baseband video and three
audio formats to provide maximum installation flexibility
• Composite and separate audio and video IF loops allow
compatibility with encoders, ghost cancellers and video
override applications
• Both EIA STD and HRC frequency plans included
USM-8D, USM-20D3, VSM3/4S – Consumer Modulator
• Single (USM-8D) and Triple (USM-20D3) low
cost UHF A/V Agile Modulator, UHF band
channels 14~83, CATV channels 65~139
• High Output 20dBmV minimum, 25 dBmV
typical provides ample signal for multiple
consumer devices (USM-20D3)
• High Output 7dBmV minimum 10 dBmV
typical provides ample signal for multiple
consumer devices (USM-8D)
F-59T
• Used to terminate unused ports reducing
reflections
• Prevents signal ingress and egress
• Reduces water migration into open port
F-81, F-81NW & CF-81-HP – Barrel Splice Connectors
• Three versions available to meet every
bandwidth requirement
• Standard F-81 for performance to 1GHz
• Precision machined threads with flat-ended
ports maximizes contact
• Low insertion loss provides unsurpassed
performance
• High 8-ampere DC continuous current
handling capacity
• Round seizing pins (CF-81-HP) maximize
center conductor surface contact. Ultra high
return loss and low insertion loss for superb
performance to 3GHz
F90-HRL, F-90 & F-71 – Adapters
• F90-HRL Ultra high return loss for superb
performance to 3GHz
• F-90 for performance to 1GHz
• F-71 Male to Male F Adapter, 1 GHz
• Round seizing pin (HRL version) maximize
center conductor surface contact
• Precision machined threads provide smooth
thread mating
• Low insertion loss provides unsurpassed
performance
• High 8-ampere DC continuous current
handling capacity
FF-R, RCA-F, BFA, PF-59 - Adapters
• FF-R Female F to RCA Female Adapter
• RCA –F Male F to RCA Female Adapter
• BFA BNC Male to F Female Adapter
• PF-59 Push-On Male to Female F Adapter
• Return loss performance ideal for video and audio
frequencies
• High retention center conductor seizing mechanism
• Precision machined threads provide smooth
connector thread mating
• Low insertion loss provides excellent performance
Meters and Tools
PICO-PRO/Q – Digital QAM Signal Meter
• Digital or analog measurements available in one
instrument
• Supports Annex A (16, 32, 64, 128, and 256) and Annex
B(64 and 256) QAM modes
• Leakage measurement in the spectrum mode or
frequency mode if the exact frequency of the leakage is
known
• Full channel range from channel T7 to 135 (5 MHz − 860
MHz).
• Multi-function digital or analog signal analysis includes all
pertinent channel and system-wide information
• Large, easy-to-read display provides quick glance
capability in dimly lit environments
• High accuracy for all individual channel and system
parameters, including: spectrum, scan, tilt, carrier-to-
noise, carrier level, and line voltage measurements
• Tilt measurement for simplified system balancing
• MER, BER, and test constellation graphic display for
accurate digital signal analysis
• Programmable power shut-off extends time between
charges
• High-impact plastic case and leatherette-vinyl case
protect unit during field use
PICO-PRO – Analog NTSC Signal Meter
• 5~870 MHz Operation including SUB-VHF forward and
reverse signal measurement
• 4 Channel plans enables easy switching between Off-Air
and CATV signals
• Frequency or channel selection provides compatibility
with channel or data! and other narrow bandwidth carriers
• Full spectrum scan provides display of up to 100 channels
simultaneously
• Tilt measurement feature provides for simplified system
balancing
• Carrier-to-noise and hum testing provides system
performance testing
• Large easy-to-read graphic LCD display provides quick-
glance signal reference
• AC/DC voltage compatibility allows RF and AC/DC
measurements without changing test equipment
• Automatic power shut-off feature extends time between
recharges
• Bright orange high impact plastic housing and soft
leatherette-vinyl protective case with belt clip included
TSSF-2150 – Pocket Satellite Finder Meter
• Wide 950~2150MHz bandwidth provides for stacked
polarity applications
• Uses overall satellite energy to efficiently display
level
• Front panel sensitivity control enables maximum dish
peaking without meter overload
• Large illuminated meter or bar graph provides an
easy-to-read display
• Built-in buzzer with pitched tone for reference without
looking away from the dish
• High sensitivity -25dBm to -75dBm provides accurate
peaking under most conditions
• RF and DC Pass-through allows use of receiver to
power meter and LNB
• 13-18VDC operation allows flexibility with all satellite
DC power systems
• Use TruSpec’s PPFAM-10 attenuator pad for input
levels >-25dBm
CCT-STQ-P, CCT-STQ-PS , ST-1P - Tools
• RG59/6 Compression Tool (21.0mm) CCT-STQ-P
• RG59/6 Compression Tool (19.3mm) CCT-STQ-PS
• Constructed of 14 ga. steel for long-term durability
• Comfortable molded plastic handle
• Convenient lightweight and compact pocket size
• Compression travel length: 21.0 mm (CCT-STQ-P)
• Overall size: 5” (L) x 2.5” (W) x 0.75” (H)
• Weight: 0.60 lbs.