Beruflich Dokumente
Kultur Dokumente
(u.FLr2)
These repair instructions are for NON WARRANTY
repairs only!
Please make visual inspection for signs of corrosion or
mechanical damages before starting.
OK
NOT OK
OK
OK
Check P-channel
Change faulty components
MOSFET Q601
NOT OK
Problem still
appears
NOT OK
OK Check ferrite bead FB504. OK
Check 2.6V output, for Check PNP transistor
It resistance should be Change faulty RAM U201
example on C548 Q502
less than 1Ohm
NOT OK
NOT OK
OK
NOT OK
Check CPU core voltage OK
Check ferrite bead FB603. Change faulty DC-DC step-
1.28V output, for
It resistance should be less than 1Ohm down converter U608
example on C675 pins
NOT OK
OK
No 40MHz
Check 40.000MHz clock
Change faulty oscillator X7
on X7 oscillator pin#3
Problem
still appears
NO 150 Ohm
Check termination resistance between Tx and Rx
Change faulty Ethernet
line in the Ethernet connector J4. The resistance
connector
between line should be 150 Ohm +/- 2%.
OK
NO 2.0V
Check 2.0V output, for example on Change faulty PNP transistor
collector PNP transistor Q501 pin2 Q501
OK
NOT OK
Check ferrite bead FB401. It resistance
Change faulty ferrite bead FB401
should be less than 1Ohm
OK
Problems
still appears
NOT OK
Make visual inspection antenna
Change faulty antenna connector
connector J704 for mechanical damages
OK
NOT OK
NOT OK
K
TO Change faulty ferrite beads FB501,
NO FB502, FB503
Check ferrite beads FB501,FB502,
FB503. OK
It resistance should be less than 1Ohm
Change faulty dual-band WLAN
chip U701
Problems still
appears
NO 5.0V
Check ferrite bead FB604. OK
Check 5.0V output, for example Change faulty DC-DC step down
It resistance should be less
on C658 pins converter U605
than 1 Ohm
NOT OK
OK
NO 3.3V NOT OK
Check ferrite bead FB701. It
Check 3.3V output, for Change faulty ferrite bead
resistance should be less
example on C784 pins FB701
than 1Ohm
m
OK
NOT OK
NO 1.22V
Check ferrite beads FB605, OK
Check 1.22V output, for Change faulty DC-DC step
FB606. It resistance should be
example on C684 pins down converter U609
less than 1Ohm
NOT OK
Problem
still appears
When you order components for repairing boards from our sales, please, write
components reference number not a part number
RB711-5Hn-U
Reference picture
RB711-5Hn-U
Output Voltage picture