Beruflich Dokumente
Kultur Dokumente
LAB WORK - 03
Microprocessor Based System
Spring/Fall/Summer 20__
Student Name SID Marks
Marks Distribution:
CLO_1
Tasks Total Marks
Marks Obtained
LED blink Assembly Code. 3
Task Proteus simulation. 2
Home Assignment. 2
Hardware Working. 3
Total Marks 10
DATE: ______________________
Remarks: ________________________________________________________________
Microprocessor Based System Instructor:
College of Engineering Ashar Ali Qureshi
PAF-Karachi Institute of Economics & Technology asharali.qureshi@pafkiet.edu.pk
Page 2 of 2
Configuration bits
LIST P=PIC18F452, F=INHX32, N=0, ST=OFF, R=HEX ; INCLUDE CONTROLLER TYPE
#INCLUDE P18F452.INC ; INCLUDE CONTROLLER FILE
; FUSE BIT SETTINGS
OBJECTIVE #1 CLO_1
Make program on MPLAB IDE that blink LED on PORTB pin B0 also simulate on PROTEUS.
OBJECTIVE #2 CLO_1
Again, make this program but this time put DELAY LOOPS in it.
OBJECTIVE #3 CLO_1
Now make this program but this time by using DELAY file.
OBJECTIVE #4 CLO_1
Blinking LED on PORTB Pin B0 when a switch is toggle between ON and OFF at PORTC Pin
C0.
Submission Details:
• Lab manual
• Print of code in assembly language.
• Proteus simulation circuit bitmap image (print screen and sniping tool’s images are not
acceptable)
• Code implement on trainer kit.