Beruflich Dokumente
Kultur Dokumente
TERMINALS OF ECU
HINT:
Inspect the connectors from the back side while the connectors are connected.
B (A20-1) - GND
W-R - W-B Battery Always 10 to 14 V
(A20-4)
Absorber control
VT (A20-3) - Ignition switch ON, absorber control
Y - W-B indicator light output 0 to 1.5 V
GND (A20-4) switch "SPORT"
signal
Absorber control
VT (A20-3) - Ignition switch ON, absorber control
Y - W-B indicator light output 10 to 14 V
GND (A20-4) switch "NORM"
signal
SLEX (A20-5) -
V-Y - W-B Exhaust solenoid valve Ignition switch ON Below 1 V
GND (A20-4)
RC (A20-6) -
Y-R - W-B AIR SUS relay Ignition switch ON Below 1 V
GND (A20-4)
CANH (A20-7) -
BR - Y CAN communication line Ignition switch ON 54 to 69 Ω
CANL (A20-8)
1 of 4 10/25/2018, 5:11 PM
SUSPENSION CONTROL: AIR SUSPENSION SYSTEM: TERMINA... https://one.tis.toyota.com/t3Portal/document/rm/RM00B0U/xhtml/RM0...
HSW (A20-15) - Height control switch Ignition switch ON, height control
LG-B - W-B 10 to 14 V
GND (A20-4) input signal switch "NORM" position
HSW (A20-15) - Height control switch Ignition switch ON, height control
LG-B - W-B 0 to 1.5 V
GND (A20-4) input signal switch "HIGH" position
SLFR (A20-16) - Height control solenoid Engine idling, height control switch
G-W - W-B 8 V or more
GND (A20-4) valve (FR) from "NORM" to "HIGH" or reverse
SLFL (A20-17) - Height control solenoid Engine idling, height control switch
R-W - W-B 8 V or more
GND (A20-4) valve (FL) from "NORM" to "HIGH" or reverse
SBR1 (A20-20) - Height control indicator Ignition switch ON, height control
V-R - W-B 10 to 14 V
GND (A20-4) output signal switch "NORM"
2 of 4 10/25/2018, 5:11 PM
SUSPENSION CONTROL: AIR SUSPENSION SYSTEM: TERMINA... https://one.tis.toyota.com/t3Portal/document/rm/RM00B0U/xhtml/RM0...
SLRL (A21-7) - Height control solenoid Engine idling, height control switch
P-L - W-B 8 V or more
GND (A20-4) valve (RL) from "NORM" to "HIGH" or reverse
SLRR (A21-8) - Height control solenoid Engine idling, height control switch
P - W-B 8 V or more
GND (A20-4) valve (RR) from "NORM" to "HIGH" or reverse
RM- (A21-18) -
BR-B - W-B Motor lock (-) Always Below 1 Ω
GND (A20-4)
SHFR (A21-20) - Height control sensor Engine idling, height control switch
B-W - W-B Approx. 2.5 V
GND (A20-4) (FR) "NORM"
SHFL (A21-22) - Height control sensor Engine idling, height control switch
L - W-B Approx. 2.5 V
GND (A20-4) (FL) "NORM"
3 of 4 10/25/2018, 5:11 PM
SUSPENSION CONTROL: AIR SUSPENSION SYSTEM: TERMINA... https://one.tis.toyota.com/t3Portal/document/rm/RM00B0U/xhtml/RM0...
SHRR (A22-28) - Height control sensor Engine idling, height control switch
P - W-B Approx. 2.5 V
GND (A20-4) (RR) "NORM"
SHRL (A22-30) - Height control sensor Engine idling, height control switch
LG - W-B Approx. 2.5 V
GND (A20-4) (RL) "NORM"
4 of 4 10/25/2018, 5:11 PM