Beruflich Dokumente
Kultur Dokumente
1 DISMANTLING WORK
2 CIVIL WORK
Page 1
Sl.No. DESCRIPTION OF ITEMS UNIT RATE QUANTITY AMOUNT
3 FLOORING WORKS
Page 2
Sl.No. DESCRIPTION OF ITEMS UNIT RATE QUANTITY AMOUNT
3.1 b). Wall, with Sand Cement Mortar (1:3)
15mm thick & 2mm thick cement
slurry at back side of tiles using
cement @ 2.91Kg/Sq.m & joint filling. Sq.M 65.00
4 ALUMINIUM WORKS
Page 3
Sl.No. DESCRIPTION OF ITEMS UNIT RATE QUANTITY AMOUNT
4.1 Providing and fixing anodised
aluminium work of approved shade
for window as per approved design
using extruded standard tubular
sections of HINDALCO or approved
make 2082@0.554Kg/m, 9139
@0.810Kg/m and 4124 @0.494 Kg/m
or approved euivalent conforming to
IS:733 and IS: 1285, anodized colour
of approved shade according to IS:
1868 fixed with rawl plugs and screws
or with fixing clips or with expansion
hold fasteners including necessary
filling up of gaps at junction, at top,
bottom and sides with required
neoprene felt etc. This item will
include all necessary standard
accessories like PVC weather gasket,
EPDM glazing gasket, handle, hinge
and applying polysulphide sealant all
around peripheri of the window, along
with 5mm thick tinted float glass of
approved colour etc. all complete. Sq.m 5.00
5 STEEL WORK
Page 4
5.1 Supplying, fitting and fixing windows
and ventilators with or without
integrated grills conforming to IS 1038-
1975 and manufactured from rolled
steel sections conforming to IS 7452-
1974 with non friction projecting type,
box type hings, glazing clips, lugs
locking bracket, handle plate etc,
including hoisting in position,
straightening if required, fixing lugs in
cement concrete (1:2:4) with stone
chips 20mm down cutting holes and
mending good damages to match with
existing surface complete in all
respect exculding glazing, in Ground
Floor.
a). openable steel windows (without
integrated grills) as per IS sizes with
side hung shutters and horizontal
glazing bars. Sq.M 15.00
b). Steel peg stay 300mm long including
fitting and fixing. Each 23.00
c). Two point nose ateel handle including
fitting and fixing. Each 14.00
d). M.S integrated grill as per approved
design integrated with steel window or
ventilator, joints continuously welded
with M.S flats and bars. Kg. 250.00
6 WOOD WORK
Page 5
6.4 Providing, fitting and fixing of
Hydraulic door closer (Medium, ISI,
size 2) at second floor of approved
quality as per ISI standard. Each 2.00
6.5 Panel Shutters of door and window as
per design (each panel consisting of
single plank without joint), including
fitting and fixing the same in position.
35mm thick shutter with 19mm thick
panels of Hallak wood. Sq.M 5.00
Page 6
6.10 Supplying, fitting and fixing P.V.C door
shutter of approved quality and shade in
position, the style & rail of the P.V.C door
shutter will be made of rigid P.V.C
multicavity hollow chamber of suitable size
and section with 2mm wall thickness , the
section will have 2nos. built in beads,
horizontal & vertical section shall be fixed
to each other by self tapping screws and 2
nos. of solid plastic or MS tubular
galvanished brackets of length 200mm x
80mm & other 100mm x 100mm both
1.20mm in each corner of the shutter
frame for placing hings. Polymer based
multicavity hollow section of 105mm x
37mm with 2mm wall thickness will be
fixed in the middle as lock rail reinforced by
solid polymer bar of 200mm long at both
ends & screws for both sides. The section
frame will then be fitted in by prepanels of
size 100mmx20mm, with wall thickness
1.2mm and 2nos. of 6mm dia bright rods
will be inserted horizontally with both side
check and nut system. The rate is inclusive
of cost of all materials, labour & hire of
tools etc. Sq.M 12.00
7 PAINTING WORKS
Page 7
7.2 Applying Acrylic emulsion of approved
make and brand on walls and ceiling
including sand papering in
intermeadiate coats including putty.
Two or more coats to give an even
shade. Sq. M 410.00
Page 8
8.5 Supplying, fitting and fixing Peet's
valve fullway gunmetal standard
pattern best quality of approved brand
bearing ISI marking with fitting (tested
to 21Kg / sq.cm).
a). 32mm. Each 5.00
b). 25mm. Each 5.00
c). 20mm. Each 2.00
d). 15mm. Each 2.00
Page 9
Sl.No. DESCRIPTION OF ITEMS UNIT RATE QUANTITY AMOUNT
8.11 Supplying, fitting and fixing bevelled
edged mirror 5.5mm thick silver red
as per I.S 3438 / 1965.( 600mm X
450mm). Each 5.00
TOTAL
Page 10