0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
26 Ansichten2 Seiten
Duconmix RB RS 110
৳ 130.00/Kg
Price Available for Only Per KG.
DUCONMIX RB RS 110 is composed of synthetic polymers specially designed to allow considerable reduction of mixing water while maintaining control on extend of set retardation.
https://duconchemical.com/product/duconmix-rb-rs-110/
Duconmix RB RS 110
৳ 130.00/Kg
Price Available for Only Per KG.
DUCONMIX RB RS 110 is composed of synthetic polymers specially designed to allow considerable reduction of mixing water while maintaining control on extend of set retardation.
https://duconchemical.com/product/duconmix-rb-rs-110/
Duconmix RB RS 110
৳ 130.00/Kg
Price Available for Only Per KG.
DUCONMIX RB RS 110 is composed of synthetic polymers specially designed to allow considerable reduction of mixing water while maintaining control on extend of set retardation.
https://duconchemical.com/product/duconmix-rb-rs-110/
xvfdgdg High-range retarding superplasticizer for high performance concrete Admixture
DESCRIPTION CORROSIVITY –NON CORROSIVE
DUCONMIX RB RS 110 is composed of synthetic DUCONMIX RB RS 110 ensures that rheoplastic polymers specially designed to allow concrete remains workable in excess of 3 hours considerable reduction of mixing water while at +25°C. Workability loss is dependent maintaining control on extend of set retardation. on temperature, and on the type of cement, the DUCONMIX RB RS 110 is preferred admixture for nature of aggregates, the method of transport triple blend binder system based high and initial workability. It is strongly performance concrete (HPC) mixes or mixes recommended that concrete should be properly containing micro silica or metakaolin. cured particularly in hot, windy and dry climates. DUCONMIX RB RS 110 is chloride free. TEST CERTIFICATION/APPROVALS RECOMMENDED USE ASTM C-494 Type G Concrete containing Silica fume/ Metakaolin EN 934-2: T11.1/11.2 Ready mixed concrete IS 9103 Congested/complex reinforced sections DOSAGE Pre-cast concrete production Optimum dosage of DUCONMIX RB RS Long-distance transporting 110 should be determined with trial mixes. Pumped concrete As a guide, a dosage range of 600ml to Low water/binder ratio mixes 1800ml per 100kg of cementitious material Mixes requiring >20% water reductions is normally recommended. Because of variations in concrete materials, job site FEATURES AND BENIFITS conditions, and/or applications, dosages Good dispersion even in mixes with high outside of the recommended range may fines be required. In such cases, contact your local Reduced thermal peaks representative. For addition information High workability for longer periods on DUCONMIX RB RS 110 admixture or on Lower pumping pressure its use in developing concrete mixes with Resistance to segregation even at special performance characteristics, contact high workability your local BASF representative. Extended setting with longer workability Reduced water content for a given Effects of over dosage workability A severe over-dosage of DUCONMIX RB RS Higher ultimate strengths 110 can result in the following: Reduced permeability Improved durability Long extension of initial and final set Reduced shrinkage and creep Increase in air entrainment Increased ease in finishing concrete Bleed/segregation of mix, quick loss PERFORMANCE TEST DATA of workability Increased plastic shrinkage Aspect Dark brown free flowing liquid A slight overdosing may not adversely affect Relative Density 1.24 0.02 at 25°C the ultimate strength of the concrete and pH >6 can achieve higher strengths than normal Chloride ion content < 0.2% concrete, provided it is properly compacted and cured. Due allowance should be made for the effect of fluid concrete pressure on form work, and stripping times should be PACKAGING monitored. DUCONMIX RB RS 110 is available in 5L, 10L, 20L In the event of over dosage, consult your & 220L drums or bulk. local representative immediately. APPLICATION DUCONMIX RB RS 110 is a ready-to-use liquid WORKABILITY which is dispensed into the concrete together DUCONMIX RB RS 110 ensures that rheoplastic with the mixing water. The plasticising effect and concrete remains workable in excess of 3 hours water reduction are higher if the admixture is at +25°C. Workability loss is dependent addedto the damp concrete after 50 to 70% of on temperature, and on the type of cement, the the mixing water has been added. The nature of aggregates, the method of transport addition of DUCONMIX RB RS 110 to dry and initial workability. It is strongly aggregate or cement is not recommended. recommended that concrete should be properly cured particularly in hot, windy and dry climates. The high-range, retarding, superplasticising admixture for concrete shall be DUCONMIX RB STORAGE/ SHELF LIFE RS 110, a sulphonated naphthalene polymer Store under cover, out of direct sunlight and based formulation having slump retaining protect from extremes of temperature. Shelf life capabilities. The product shall comply with is at least 2 years when stored as above. Failure IS:9103 and shall be of type G when tested to comply with the recommended storage to ASTM C-494. The product shall have conditions may result in premature average relative density of 1.24 at 25oC. deterioration of the product or packaging COMPABILITY PRECAUTION DUCONMIX RB RS 110 is compatible with most admixtures used in the production of quality Care should be taken during use and storage to concrete including normal, other mid-range and avoid contact with eyes, mouth, skin and high-range water-reducing admixtures, air foodstuffs (which can also be tainted with vapor entrainers, accelerators, retarders, extended until product fully cured or dried). Treat splashes set-control admixtures, corrosion inhibitors, to eyes and skin immediately. If accidentally and shrinkage reducers ingested, seek immediate medical attention. Keep away from children and animals.
Statement of Responsibility (Disclaimer)
The technical information and application advise are based on present state of our best scientific and practical knowledge. As the information herein of a general nature, no assumption can be made as to a products suitability for a particular use or application and no warranty as to its accuracy, reliability or completeness either expressed or implied is given other than those required by law. The user is responsible for checking the suitability of products for their intended use.