Beruflich Dokumente
Kultur Dokumente
ROC F7
Recommended hole range 76–115 mm (3"–41/2")
Power and economy
in perfect harmony
Atlas Copco’s ROC F7 surface Engine exhaust emissions and en- recommended whenever the
crawler is an excellent example of gine noise levels are well below incline of the ground exceeds 20°.
company philosophy. A philosophy the levels prescribed by current
of producing drill rigs that give the regulations. Good all-terrain abilities
best overall economy in terms of The successful harmony of size,
the cost per tonne of rock drilled – The compressor with power, machine design and weight
drill rigs in a class of their own. more muscle distribution enables the ROC F7
The ROC F7 is available in two The ROC F7 is equipped with a to make its way with ease across
versions: a single-boom model renowned Atlas Copco screw com- even the most difficult ground.
ideal for use in quarries, and pressor, producing at 10,5 bar The tracks are wide providing mini-
a folding-boom model with the
(152 psi), 148 l/s (314 cfm) of free mum ground pressure, the two
versatility to tackle all kinds of
air delivery, more than enough air traction motors develop 38 kW
work site.
to provide excellent hole flushing each (50 HP), producing 15 tonnes
in the worst drilling conditions. of traction power – more than the
Caterpillar diesel engine total weight of the machine. The
The service life of the engine de- Strong, stable undercarriage track oscillation of ±10° plus a low
pends on how hard it is worked. The underside of the frame is com- center of gravity, excellent weight
The ROC F7 is equipped with pletely sealed with flat, thick steel distribution and ground clearance
a water-cooled, turbo-charged CAT plates that are removable for easy of 405 mm (16”) allows the ROC F7
diesel engine of 186 kW (253HP), access to the underside of the en- to travel easily around any work
at maximum drilling it only uses gine, air compressor and main site. The choice of track shoes is
150 kW (204HP). This guarantees a pumps. The compact robust determined by the working envi-
large power reserve, which is good track frame design offers effective ronment.
news both for engine life and fuel protection for both the traction mo- Triple-grouser pads are ideal
consumption. tors and the hydraulic hoses. The when drilling in quarries, whereas
overall dimensions of all models single-grouser pads are the natural
are within the international limits choice for site work, since they
for road transport. offer valuable extra traction in all
conditions, even in snow and mud.
Hydraulic winch with
With the movable drill-steel support in the lower
position, the drill rod is accurately and securely remote control panel Double drill-steel supports
guided, thus minimizing hole deviation and To get an optimum view during A good drilling result needs a perfect
collaring problems.
tramming in difficult terrain the start. For this reason, the ROC F7
operator can remotely control the has double drill-steel supports, the
ROC F7 via a hand held control upper one fixed and the lower one
panel. From as far away as 10 movable. The operator raises and
metre (33’) the operator can safely lowers the drill support from the
control the simultaneous use of the seat in the cab.
winch and tramming controls, plus In extremely difficult drilling
track oscillation and boom move- conditions, such as loose or fis-
ments. sured rock, the centralizer can be
To meet new international safety supplemented with a special tube
standards and requirements, the guide for additional support of the
use of the 7 tonne Atlas Copco drill string.
winch with built-in safety break is
2
Welcome aboard!
The interplay between man and • Easily accessed, lockable service vibration and gives greater com-
machine starts in the operator’s hatches. (Lockability is a good fort during tramming.
cab. For this reason, we have ex- security precaution at isolated • Adjustable sun protection for cab
pended great effort in the develop- worksites.) windows.
ment of a well conceived, purpose- • Easy-to-read instrumentation that
built cab. Even the smallest details is simple to learn and to use.
have been considered. Welcome • 12-volt outlet for mobile telepho- Safety
aboard a modern work station, not ne. • Cab complies with European and
only in terms of mechanical func- • Improved air ventilation effective- international safety demands:
tion but also ergonomics, safety ly clears condensation mist from Roll-Over Protective Structure
and environment. roof and side windows. (ROPS) and Falling Object Protec-
• Jumbo-sized rear-view mirror tive Structure (FOPS).
gives good visibility and safer rig • Operator’s seat is slewable for
Function moving. smooth and easy exit from and
• Superb view of the drill hole from entry into the cab.
the operator’s station facilitates • Door fitted with safety stop that
accurate collaring. Ergonomics prevents crush injury to fingers
• Atlas Copco screw compressor, • Operator can monitor and control etc.
delivering 148 l/s at 10,5 bar, the entire drilling process without
garanties excellent flushing. changing bodily position. Relie-
• Jumbo-sized windscreen wiper as ves neck, shoulders and back Environment
well as wipers on the right-hand, from strain. • Exhaust emission values lower
and roof windows gives good vi- • Vertically and laterally adjustable, by good margin than those stipu-
sibility even in bad weather. ergonomically designed seat with lated in international standards.
• Spacious cab gives good movea- collapsible arm rests. • Noise values well below those
bility and comfort for the opera- • Control levers and control panel stipulated in international stan-
tor. located in close proximity to the dards.
• Double drill steel guides gives arm rests. • CFC-free air conditioning.
straighter holes. • Low noise level (below 80 dB). • Efficient dust collection and
• Straighter holes and bigger bur- • Very efficient air conditioning coarse separation.
den and spacing save explosives. system (cooling and heating). • Feed fitted with collectors for
• More efficient drilling saves fuel. • More surfaces now textile cove- lubricating oil.
• CAT diesel engine with a great red for greater comfort. • Biologically degradable hydraulic
power reserve for trouble free • Rubber-damped cab mounted oils available as options.
operation and long service life. directly on the chassis reduces
4
The rock drill COP 2150
at the heart of the ROC F7
Separately lubricated shank
adapter prolongs service life.
6
Two stroke length positions, easily A long slender piston produces lenient
changed to better suit the rock, and drill steel adapted shock waves with a
obtain higher penetration. high energy content.
7
Liljedal Communication AB. Printed in Sweden 0406
Technical Data ROC F7
Compressor
Atlas Copco, screw type
compressor
Working pressure 10.5 bar 152 psi
FAD 148 l/s 314 cfm
Engine
Diesel, CAT 3126B
Illustrations in this brochure may show equipment with optional extras. Specifications and equipment subjects to change without
Rating at 2000 rpm 186 kW 253 HP
Fuel tank
Capacity 400 l approx. 100 gal.
prior notice. Consult your Atlas Copco sales company for specific information.
Hill climbing ability, with winch 35° 35° Feed extension
Track oscillation ±10° ±10° Fuel saving device
Ground clearance 405 mm 16" Heavy duty tracks
Hydraulic support leg
Hydraulic rock drill Operator’s cabin, ROPS and FOPS approved
COP 2150, impact power 21 kw 28.1 HP Reduced impact pressure mechanism
Working pressure max. 210 bar 3 045 psi Rod handling system (7+1 rods)
Torque 980 Nm 722 lbf.ft Toe-hole drilling kit
Weight approx. 187 kg 413 lb Two-speed traction
Water mist system excl. tank
Transport dimensions Stepless engine speed control
Length
folding boom version 13 000 mm 42’8" Optional equipment
single boom version 12 300 mm 40’4" Cabin windows, tinted
Width 2 490 mm 8’2" Central lubrication system
Height Electric heated operator’s seat
folding boom version 3 200 mm 10’6" Hydraulic winch
single boom version 3 200 mm 10’6" TAC tube guides for precision drilling
Weight Thread greasing device
folding boom version 15 700 kg 34 600 lb COP 1838/1840
single boom version 15 100 kg 33 300 lb Hydraulic Extractor
Reach, vertical Coverage areas, with horizontal feed Coverage areas, with vertical feed
5
7 7 4
Folding boom 1 300
Single boom 6 6 3
5 5 2
8 100
4 4 1
330
3 3 0
3 030
2 2 1
2 420
1 1 2
0 0 3
2 820
3 550 1 1 4
4 970
5 680 2 2 5
6 5 4 3 2 1 0 1 2 3 4 6 5 4 3 2 1 0 1 2 3 4 5 4 3 2 1 0 1 2 3