Beruflich Dokumente
Kultur Dokumente
Cartridge Filters
TekfilTM cartridges Cartridge construction Materials of manufacture Clean water flow rates
Tekfil is a high flow, graded depth filter with high contaminant
TM
Extensive research and selection of the latest and most advanced The high quality robust polypropylene and/or nylon construction of Filter media Polypropylene/nylon Typical clean water flow rate
capacity for long life. Constructed from FDA approved polypropylene meltblown filter media, results in improved TekfilTM cartridges, allows for excellent chemical compatibility with a End fittings Polypropylene A 254mm (10") TekfilTM single cartridge exhibits the flow-ΔP
polypropylene with excellent performance characteristics, it is an performance, leading to extended filter life at a given efficiency. wide range of bulk inkjet fluids. characteristics indicated below, for solutions with a viscosity of
economic choice for a wide range of applications. Cartridge dimensions (nominal) 1 centipoise.
Graded depth media The meltblown polypropylene and nylon media provides a bonded
TekfilTM is available in a range of industrial standard lengths as Diameter 63mm (2.5") ther solutions
O
matrix thus eliminating fibre migration.
either absolute or nominal rated cartridges. Also available in nylon The graded structure of the media provides prefiltration of the Length 254mm (10") For solutions with a viscosity of greater than
construction for solvent filtration. process fluid prior to the absolute rated final layer. This combination The inherent structural stability of the TekfilTM, prevents ‘channelling’ 508mm (20") 1 centipoise, multiply the indicated differential pressure by the
provides economy of use and a smaller process footprint. and avoids the risk of particle unloading even under impulse 762mm (30") viscosity in centipoise.
Applications conditions. 1016mm (40")
High degree of chemical compatability
50
TekfilTM cartridges provide absolute and nominal filtration where the Gaskets and o-rings
Constructed entirely of polypropylene and/or nylon. he TekfilTM fusion bonded construction ensures cartridge
T
cost of filtration is critical. Suitable for the filtration of aqueous and
ink types: TekfilTM cartridges are validated using recognised industry standard
Maximum differential pressure
test methods. 20
• Aqueous TN01 (Nominal)
Normal flow direction at TN05 (Nominal)
• UV Environmentally friendly 20°C (68°F) 3.5 bar (51psi)
10
TN10 (Nominal)
• Solvent Tekfil filters are environmentally friendly, all spent cartridges can
TM 60°C (140°F) 1.0 bar (15psi) 0
TN20 (Nominal)
0 5 10 15 20
• Dye be readily incinerated to trace ash. 80°C (176°F) 0.5 bar (7psi) Flow (l/min)
Inprinta bulk filtration provides a low cost product aimed at the Maximum continuous 80°C (176°F)
Code Pore Rating Absolute Rating Nominal Rating Nominal Rating 400
1
1
Additional Information Contact us
Range Chemical compatibility For further information on our product
range or manufacturing services, please
Suitable for use in Inprinta filter housings and as direct The TekfilTM materials of construction are compatible with a wide
contact Inprinta on the details below:
replacements for existing cartridges, TekfilTM cartridges can be range of chemicals and solvents, however care must be taken
supplied with end fittings to suit most hardware installations without to select the appropriate seal material. Advice on chemical
modification. They are available in lengths of 10, 20, 30 and 40 compatibility is available. Since operating conditions vary
inches, and in a choice of removal ratings from 1 to 100 micron. considerably between applications, verification by the end user is
Inprinta
recommended.
Material conformity and validation Queensway, Stem Lane
Filter housings New Milton, Hampshire
The bio-safety of all materials used in the manufacture of
TekfilTM cartridges is assured by FDA approval to Title 21CFR.177. Please contact an Inprinta representative for further information on BH25 5NN, UK TekfilTM Polypropylene Depth Filters
our range of filter housings. T +44 (0)1425 612010
Registered to ISO 9001, Inprinta procedures are subject to high E info@inprinta.com
standards of quality assurance as demonstrated through its Drug
Master File status. 301 Business Lane
Ashland, Virginia 23005, USA
T +1 804 550 1600
E info@inprinta.com
Chengdong Area
Square Industrial Park, North District
Xiaonan Economic Development Zone
Xiaogan, 432000, China
T +86 (0)712 2878955
E info@inprinta.com
www.inprinta.com