Beruflich Dokumente
Kultur Dokumente
condensed catalog
HOKE Inc.
PO Box 4866 • Spartanburg, SC 29305-4866
Phone (864) 574-7966 Fax (864) 587-5608
www.hoke.com • Sales-hoke@circor.com
Needle Valves
Forged Body Needle Valves 1700 Series
Applications: Cv Factors:
• Cylinder valves • .31
• Panel board instrumentation
• Pilot plants for corrosive liquids and high Features:
pressures
• Research laboratories • Choice of 316 stainless steel or Monel®
• Choice of metal or plastic handle
Maximum Operating Pressure: • Dyna-Pak® packing below stem threads
provides leak-tight service
• 6000 psig @ 70° F • Non-rotating stem point prevents galling
(414 barg @ 21° C) and extends valve life
• Hardened thread gland provides long
Operating Temperature Range: cycle life
• -65° F to +450° F (-54° C to +232° C)
Orifice Size:
• .187″ (4.8 mm)
Orifice Sizes:
• .086″ to .313″ (2.2 mm to 8.0 mm)
Orifice Sizes:
• .031″ (.79mm)
Ball Valves
Features:
• Available in Double Acting (air to open and air to close) or Spring Return (normally open or
normally closed) models.
• Durable construction stands up to harsh environmental conditions, increasing durability
and reliability.
• Compact size provides greater installation flexibility in tight spaces.
• Field assembled valve / actuator option provides simple conversion of manual valve to
pneumatic operation. This increases flexibility and decreases installation costs.
• Top mounted actuator allows for conversion from manual valve to pneumatic operation
without disrupting packing. Ensuring leak-tightness and imp roving reliability.
• Long cycle life results in reduced maintenance requirements and lower cost of ownership.
Orifice Sizes:
• .093″ to .375″ (2.4 mm to 9.5 mm)
Orifice Sizes:
• .093″ to .187″ (2.4 mm to 4.8 mm)
Applications: Features:
• Compact interlocking of multiple actuators • Small envelope (2¼″ × 2¾″ × 3½″)
• Ideal for instrumentation panels • Can actuate two valves simultaneously
• Actuates small and mid-sized ball valves • Multiple mounting options
• Uses standard shop air
Maximum Operating Pressure: • Available in spring return and double
acting modes
• 125 psig @ 70° F (9 barg @ 21° C)
• 90° and 180° operation
Orifice Sizes:
• .166″ and .187″ (4.2 mm and 4.8 mm)
Plug Valves
Quarter-Turn Plug Valves 7300 Series
Applications: Cv Factor:
• Instrument air lines • .74
• Test benches
• Sampling lines Features:
• Pilot plant instrumentation
• Choice of brass or 316 stainless steel
• Low pressure air lines
• Oval trip-proof handle provides visual flow
indication
Maximum Operating Pressure: • Dual retaining rings prevent accidental
• 3000 psig @ 70° F plug removal
(207 barg @ 21° C) • Throttling capabilities
• Vented version for down stream venting
Operating Temperature Range: • Retainer allows 1000 psig (69 barg) reverse
operating pressure
• -20° F to +400° F (-29° C to +204° C)
Orifice Sizes:
• .093″ to .187″ (2.4 mm to 4.8 mm)
Orifice Sizes:
• .125″ to .219″ (3.2 mm to 5.6 mm)
Orifice Sizes:
• .059″ and .170″ (1.5 mm and 4.3 mm)
Sampling Cylinders
Spun Sampling Cylinders
Applications: Features:
• Hydrocarbon sampling • Choice of 7 capacities ranging from 75 cc
• High vacuum systems to 3785 cc (1 gallon)
• Chemical reaction vessels • Manufactured to DOT 3A or 3E
requirements
Maximum Operating Pressure: • All interior surfaces are sandblasted for a
uniform surface
• 1800 psig (124 barg)
• 316 Stainless Steel construction
Analytical Products
73S Series Selector Valves
Applications: Cv Factor:
• Process analyzers • .071 maximum
• Instrumentation
• Gas chromatography Features:
• 5-way or 7-way configuration
Maximum Operating Pressure: • Wide temperature range
• 500 psig @ 70° F (34.5 barg @ 21° C) • Sliding seal principles
• 200 psig @ 350° F (13.8 barg @ 175° C) • Bi-directional flow
• GYROLOK® Tube Fitting or female NPT
Operating Temperature Range: connections
• -40° F to +350° F (-40° C to +177° C)
Orifice Sizes:
• .051″ to .093″ (1.30 mm – 2.36 mm)
Chromatography Fittings
Applications: Orifice Sizes:
• Gas or liquid chromatography • .013″ - .052″ (0.33 mm – 1.32 mm)
• Analytical equipment
Features:
Maximum Operating Pressure: • Low dead volume
• Rated for working pressures higher than • Controlled ferrule drive
the tubing recommended for use • Interchangeability
• Press-fit or drop-in frits
Operating Temperature Range:
• -325° F to +800° F
(-198° C to +427° C)
6
1 3 9 8
BODY
R EAR FERRULE NUT
FRONT FERRULE
3. HOKE Controlled ferrule drive prevents end connection expansion, thus prolonging Long product life and maximum value.
VALVES WITH valve life and eliminating the need to use female-ended valves with separate Safety and economy.
INTEGRAL HOKE fittings.
GYROLOK® Eliminates a possible leak path and extends valve life.
END FITTINGS
4. GYROLOK® Nut and ferrule sets supplied on rods, already correctly oriented. (Not neces- Safest, simplest device for component replacement.
SAFETY sary to handle ferrules when replacing components.)
CHANGER NUT
AND FERRULE
SETS
5. GYROGAGE Marks tubing to show that tubing has been properly inserted into fitting, and Maximum safety resulting from ability to verify correct
that fitting has been properly tightened. tube insertion and proper tightening.
6. SIZING ANGLE Slight taper in the base of the tube socket reduces possibility of tube sticking Less tube sticking during disassembly saves time and
money
7. SILVER- Silver-plating extends fitting life by preventing galling, up to 1200° F (649° C). Extended product life at extreme temperatures.
PLATED NUT
THREADS
8. MATERIAL Bodies and nuts made of 316 Stainless Steel and Monel are heat code trace- Traceability provides added safety. Certified Material Test
TRACEABILITY able to Certified Material Test Reports. Reports are available for review and verification.
ON FITTING BODY
AND NUT
9. PFA Front ferrules—Sizes larger than 1” (25mm) are PFA coated. Increased resistance to media and atmospheric
FERRULE corrosion.
COATING
10. SPECIAL HIGH ANSI Standard B1.20.1 - Basic + 1/4 to Basic +1. Provides a Safer more robust connection: 63% tighter
TOLERANCE NPT tolerance with up to six thread engagement, reduced
THREAD galling and vibration
Contact your local HOKE Distributor for fur- RP to ISO 228/1 Male Modifier is B, following the unit of Metal-to-metal sealing to
measure for fractional (E) or metric DIN 3852, Form B
ther information. BS 2779
(M), as in 6CM4316EB
JIS B0202
RS to ISO 228/1 Male Modifier is A, following the unit of Utilizes a sealing washer
Certified Material Test Reports measure for fractional (E) or metric to provide sealing.
(CMTRs): BS 2779
(M), as in 6CM4316EA Reference DIN 3852,
JIS B0202 Form A **
Bodies and nuts of HOKE GYROLOK® fittings
in all materials other than brass are heat code RG to ISO 228/1 Female Modifier is Z, following the unit of Sealing form meets DIN
traceable. To obtain CMTRs for these compo- measure for fractional (E) or metric 3852, Form Z
BS 2779
(M), as in 6CF4316EZ
nents, place separate orders for such items and
JIS B0202
specify “CMTRs required on all items”.
** Female RP or RS ends available with Form X.
Pressure Rating:
HOKE GYROLOK® fitting ends(1) are rated for Tapered Thread Information
working pressures higher than the tubing rec- Specification(s) Type Part Number or Sealing Method
ommended for use with HOKE GYROLOK®. Suffix Designation
NPT M/F Fitting type ends in M or Seal is made on the thread.
F, as in CM or CF
Tubing should not be utilized at pressures Thread sealant is required.
above its maximum allowable working pres- RT to ISO 7/1 M/F Modifier is C, following Seal is made on the thread. Thread seal-
sure. Check the HOKE Tubing Data Charts for the unit of measure for ant is required. The BSP/ISO thread uti-
BS 21 M/F
fractional (E) or metric lizes a different angle and the number
(1)
Note: Pressure ratings may vary for other fitting ends. JIS B0203 M/F (M), as in 6CM4316EC of threads per inch may differ from NPT.
Reference DIN 3852, form C.
DIN 2999 Male
Available sizes include 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″ threads,
which exceed the requirements of ANSI B 1.20.1 for (NPT) tapered
pipe threads. Protective end caps prevent damage to exposed
threads.
Materials:
HOKE Precision Instrument Pipe Fittings are available as standard in brass and 316 stainless steel.
• 316 stainless steel Forgings: ASTM A-182
• 316 stainless steel Bar Stock: ASTM A-479
• Brass Forgings, Alloy 377: QQ-B-626
• Brass Bar Stock, Alloy 353 ASTM B-453
• Brass Bar Stock, Alloy 360: ASTM B-16
Features:
• Fitting design meets the requirements of ANSI B 31.1 Power Piping Code, ANSI B 31L1 Chemical Plant and Petroleum Refinery Piping, and
Section VII of ASME Boiler and Pressure Vessel Code.
• Fittings are machined from materials, which meet ASTM specifications.
• 316 stainless steel fittings are heat traceable.
• Available in wide variety of shapes and sizes.
• Threads exceed the requirements of ANSI B 1.20.1 for tapered pipe threads (NPT).
• Protective end caps prevent damage to exposed threads.
IT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE
FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND
MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS
SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN
CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE.
The following are trademarks of their respective companies: Monel® and Inconel, Special Metals Corporation; Hastelloy®, Haynes
International, Inc.; Viton®, E.I. Dupont. GYROLOK® is a registered trademark of Hoke, Inc.
PO Box 4866
Spartanburg, SC 29305-4866
Tel +1-864-574-7966
Fax +1-864-587-5608
www.hoke.com
Sales-hoke@circor.com