Sie sind auf Seite 1von 32

Guide to Building

HCIE Laboratory

Issue 01

Date 2013-10-30

HUAWEI TECHNOLOGIES CO., LTD.


Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.


Enterprise BG Learning and Certification Dept
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website: http://enterprise.huawei.com/en/training/

Email: learning@huawei.com

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential i


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Information of the Guide

Issue Date Author Time Range Reader

01 2012-12-3 Enterprise BG Learning and Certification 2012-12-3-2013-12-31 Training


Dept Manager

02 2013-10-3 Enterprise BG Learning and Certification 2012-12-3-2014-12-31 Training


0 Dept Manager

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential ii


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory Contents

Contents

1 About This Document ............................................................................................................. 1


2 Equipment Purchasing ............................................................................................................ 4
3 Module Installation ................................................................................................................. 5
4 Cable Connection ..................................................................................................................... 9
5 Console Server Configuration .......................................................................................... 1716
6 FR Switch Configuration .................................................................................................. 2221
7 Console Cable Preparation ............................................................................................... 2624
8 Problems Caused by Non-Standard Equipment ............................................................ 2725
9 Appendixes ......................................................................................................................... 2826

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential iii


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 1 About This Document

1 About This Document

This guide provides information to help regional office, suppliers, and authorized learning
partners (HALPs) purchase equipment, install modules, connect cables, configure relate
control equipment, build HCIE-RS laboratory finally.

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 1


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 1 About This Document

Figure1-1, figure 1-2, figure 1-3 show the physical topology.

Figure 1-1 Physical topology

Figure 1-2 Physical topology

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 2


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 1 About This Document

Figure 1-3 Physical topology

The physical topology shown in Figure 1-1, Figure 1-2 , Figure 1-3 contain all equipments on the
purchase list.

The frame relay switch (FRSW) is mandatory in all types of experiments. However, this guide
just introduces how to configure FRSW.
FRSW is configured with two 8-interface ASEs ("8ASEs") and also acts as the console server.
It connects to the console port of other equipments by using console cables. Figure 1-1, figure
1-2, figure 1-3 do not show the connection of the console cables. For details about the
connection, see chapter 5 "Console Server Configuration".

we use the AR G3 equipment to simulate frame relay switch(FRSW).

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 3


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 2 Equipment Purchasing

2 Equipment Purchasing

You must purchase the equipment based on the experiment requirements. The equipment
purchasing list, named HCIE Equipment List v3.3 is attached in chapter 9 "Appendixes".
This guide only applies to the process of building HCIE laboratory with the equipments
purchased according to HCIE Equipment list v3.3 lab build process.
When you purchase equipments, please be based on requirement of HCIE laboratory. If you
have any question, please send email to YanFei (y84026870/yanfei1@huawei.com) who
comes from Learning and Certification department.

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 4


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 3 Module Installation

3 Module Installation

The router and console server are modular equipment and you need to install them manually.
To ensure that interfaces names of equipments are consistent with the names in HCIE
laboratory guide and all experiments can be carried out properly and successfully, you must
install the modules of the routers based on the following requirements.
In addition, this section describes only the installation position of the equipment modules,
rather than the installation process and method. For details about how to install the modules,
see the ARG3-Install.pdf and S5700-Install.pdf in chapter 9 "Appendixes".
The R1, R2, R3, R4, R5, R6, BB1-2, BB3 and FRSW(we use the AR G3 equipment to
simulate frame relay switch) are all AR G3 2220E equipments.
The following figure shows the front panel of the AR G3 2220E equipment:

The following figure shows the rear panel of the AR G3 2220E equipment.

The modules are installed on the rear panel based on the slot number.
Table 3-1 describes the modules installed on the R1:

Table 3-1 Modules installed on the R1

Slot No. Module Type


1 (SIC) 1SA
2 (SIC) 1SA
3 (SIC) 1SA

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 5


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 3 Module Installation

Slot No. Module Type


4 (SIC) Not in use
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-2 describes the modules installed on the R2.

Table 3-2 Modules installed on the R2

Slot No. Module Type


1 (SIC) 1SA
2 (SIC) 1SA
3 (SIC) 1SA
4 (SIC) Not in use
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-3 describes the modules installed on the R3.

Table 3-3 Modules installed on the R3

Slot No. Module Type


1 (SIC) 1SA
2 (SIC) 1SA
3 (SIC) 1SA
4 (SIC) Not in use
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-3Table 3-4 describes the modules installed on the R4.

Table 3-4 Modules installed on the R4

Slot No. Module Type


1 (SIC) 1SA
2 (SIC) 1SA

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 6


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 3 Module Installation

3 (SIC) 1SA
4 (SIC) Not in use
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-3Table 3-5 describes the modules installed on the R5.

Table 3-5 Modules installed on the R5

Slot No. Module Type


1 (SIC) 1SA
2 (SIC) 1SA
3 (SIC) 1SA
4 (SIC) Not in use
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-3Table 3-6 describes the modules installed on the R6.

Table 3-6 Modules installed on the R6

Slot No. Module Type


1 (SIC) 1SA
2 (SIC) 1SA
3 (SIC) 1SA
4 (SIC) Not in use
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-3Table 3-7 describes the modules installed on the BB1-2.

Table 3-7 Modules installed on the BB1-2

Slot No. Module Type


1 (SIC) 1SA
2 (SIC) 1SA

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 7


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 3 Module Installation

3 (SIC) 1SA
4 (SIC) 1SA
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-3Table 3-8 describes the modules installed on the BB3.

Table 3-8 Modules installed on the BB3

Slot No. Module Type


1 (SIC) Not in use
2 (SIC) Not in use
3 (SIC) Not in use
4 (SIC) Not in use
5 (WSIC) Not in use
6 (WSIC) Not in use

Table 3-9Table 3-9 describes the modules installed on the FRSW.

Table 3-9 Modules installed on the FRSW

Slot No. Module Type


1 (SIC) 2SA
2 (SIC) 2SA
3 (SIC) 2SA
4 (SIC) 2SA
5 (WSIC) 8ASE
6 (WSIC) 8ASE

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 8


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

4 Cable Connection

The equipment must be connected based on the topology shown in figure 4-1, figure 4-2, and
figure 4-3.

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 9


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

Figure 4-1 Cable connection topology

Figure 4-2 Cable connection topology

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 10


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

Figure 4-3 Cable connection topology

Figure 4-4 Physical topology

As show in figure 4-2, the serial cables have two ends, the DCE end and the DTE end.
Connect the DCE end of the serial cables to the FRSW when using them to connect the
FRSW and the R1, R2, R3, R4, R5, R6 and BB1-2.
Figure 4-4, FRSW use one cable connect it’s G0/0/0 to it’s G0/0/1.
In addition, connect the DCE end of the serial cable to the R1 when connecting R1 and R2;
the DCE end to the R2 when connecting R2 and R3; the DCE end to the R3 when connecting
R3 and R4; the DCE end to the R4 when connecting R4 and R5; the DCE end to the R5 when
connecting R5 and R6; the DCE end to the R6 when connecting R6 and BB1-2; the DCE end
to the BB1-2 when connecting BB1-2 and R1.
Ensure that proper models are used for different types of equipment based on the mapping
provided in Table 4-1.

Table 4-1 Required model for different types of equipment

Equipment Model
R1 AR 2220E
R2 AR 2220E
R3 AR 2220E
R4 AR 2220E
R5 AR 2220E

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 11


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

R6 AR 2220E
BB1-2 AR 2220E
BB3 AR 2220E
S1 S5720-36C-EI-AC
S2 S5720-36C-EI-AC
S3 S3700-28TP-EI-AC
S4 S3700-28TP-EI-AC
FRSW AR 2220E

Check whether the ports are connected correctly based on Table 4-2.

Table 4-2 Required mapping between ports

R1 G0/0/0 S1
G0/0/1 S2
S1/0/0 FRSW
S2/0/0 R2
S3/0/0 BB1-2

R2 G0/0/0 S1
G0/0/1 S2
S1/0/0 FRSW
S2/0/0 R1
S3/0/0 R3

R3 G0/0/0 S2
G0/0/1 S3
S1/0/0 FRSW
S2/0/0 R2
S3/0/0 R4
R4 G0/0/0 S2
G0/0/1 S3
S1/0/0 FRSW
S2/0/0 R3
S3/0/0 R5

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 12


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

R5 G0/0/0 S3
G0/0/1 S4
S1/0/0 FRSW
S2/0/0 R4
S3/0/0 R6
R6 G0/0/0 S3
G0/0/1 S4
S1/0/0 FRSW
S2/0/0 R5
S3/0/0 BB1-2
BB1-2 G0/0/0 S1
G0/0/1 S2
S1/0/0 FRSW
S2/0/0 FRSW
S3/0/0 R1
S4/0/0 R6
BB3 G0/0/0 S3

S1 G0/0/1 R1
G0/0/2 R2
G0/0/13 S2
G0/0/14 S2
G0/0/15 S2
G0/0/16 S3
G0/0/17 S3
G0/0/18 S3
G0/0/19 S4
G0/0/20 S4
G0/0/21 S4
G0/0/24 BB1-2

S2 G0/0/1 R1
G0/0/2 R2
G0/0/3 R3

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 13


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

G0/0/4 R4

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 14


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

G0/0/13 S1
G0/0/14 S1
G0/0/15 S1
G0/0/16 S3
G0/0/17 S3
G0/0/18 S3
G0/0/19 S4
G0/0/20 S4
G0/0/21 S4
G0/0/24 BB1-2
S3 E0/0/3 R3
E0/0/4 R4
E0/0/5 R5
E0/0/6 R6
E0/0/13 S1
E0/0/14 S1
E0/0/15 S1
E0/0/16 S2
E0/0/17 S2
E0/0/18 S2
E0/0/19 S4
E0/0/20 S4
E0/0/21 S4
E0/0/24 BB3

S4 E0/0/5 R5
E0/0/6 R6
E0/0/13 S1
E0/0/14 S1
E0/0/15 S1
E0/0/16 S2
E0/0/17 S2
E0/0/18 S2

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 15


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 4 Cable Connection

E0/0/19 S3
E0/0/20 S3
E0/0/21 S3
FRSW S1/0/0 R1
S1/0/1 R2
S2/0/0 R3
S2/0/1 R4
S3/0/0 R5
S3/0/1 R6
S4/0/0 BB1-2
S4/0/1 BB1-2
G0/0/0 FRSW G0/0/1

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 16


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 5 Console Server Configuration

5 Console Server Configuration

To implement remote experiments, the console server is used in the experiments to provide
unified out of band management for equipment. Two 8ASE modules are equipped on the
server to implement this function.
You are advised to use console cables to connect the console server and other equipment as
required in Table 5-1.

Table 5-1 Required connections

Interface Name Connected Equipment


Async5/0/0 R1
Async5/0/1 R2
Async5/0/2 R3
Async5/0/3 R4
Async5/0/4 R5
Async5/0/5 R6
Async5/0/6 BB1-2
Async5/0/7 BB3
Async6/0/0 S1
Async6/0/1 S2
Async6/0/2 S3
Async6/0/3 S4
Async6/0/4 FRSW

To configure the console server, run the following commands:


1. Run the following commands to configure the Async interfaces:

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 17


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 5 Console Server Configuration

interface Async5/0/0
async mode flow
undo detect dsr-dtr
description connect R1
#
interface Async5/0/1
async mode flow
undo detect dsr-dtr
description connect R2
#
interface Async5/0/2
async mode flow
undo detect dsr-dtr
description connect R3
#
interface Async5/0/3
async mode flow
undo detect dsr-dtr
description connect R4
#
interface Async5/0/4
async mode flow
undo detect dsr-dtr
description connect R5
#
interface Async5/0/5
async mode flow
undo detect dsr-dtr
description connect R6
#
interface Async5/0/6
async mode flow
undo detect dsr-dtr
description connect BB1-2
#
interface Async5/0/7
async mode flow
undo detect dsr-dtr
description connect BB3
#
interface Async6/0/0
async mode flow
Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 18
Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 5 Console Server Configuration

undo detect dsr-dtr


description connect S1
#
interface Async6/0/1
async mode flow
undo detect dsr-dtr
description connect S2
#
interface Async6/0/2
async mode flow
undo detect dsr-dtr
description connect S3
#
interface Async6/0/3
async mode flow
undo detect dsr-dtr
description connect S4
#
interface Async6/0/4
async mode flow
undo detect dsr-dtr
description connect FRSW
#

2. Enter corresponding TeleType (TTY), and run the following commands:

user-interface tty 33
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3001
user-interface tty 34
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3002
user-interface tty 35
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3003

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 19


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 5 Console Server Configuration

user-interface tty 36
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3004
user-interface tty 37
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3005
user-interface tty 38
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3006
user-interface tty 39
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3007
user-interface tty 40
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3008
user-interface tty 41
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3009
user-interface tty 42
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3010
user-interface tty 43
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3011
user-interface tty 44
undo shell
Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 20
Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 5 Console Server Configuration

idle-timeout 0 0
redirect enable
redirect listen-port 3012
user-interface tty 45
undo shell
idle-timeout 0 0
redirect enable
redirect listen-port 3016
#

3. Configure the IP address for the console server to connect to the actual network.
Connect one Ethernet interface of the console server to the actual network, and configure
the IP address and default gateway (default routing) based on the network requirements.
4. Connect the console server to the controlled equipment by using the contra-Telnet.
Start the Telnet client on a PC, and log into Console server. On Console server, use the
command telnet 127.0.0.1+<port number> to log into the device.
Device name and port number shown in the following table:

Device Name Port number


R1 3001
R2 3002
R3 3003
R4 3004
R5 3005
R6 3006
BB1-2 3007
BB3 3008
S1 3009
S2 3010
S3 3011
S4 3012
FW 3016
If you want to log into R1, you can use the command telnet 127.0.0.1 3001 on Console
server.

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 21


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 6 FR Switch Configuration

6 FR Switch Configuration

The experiment also involves the FRSW(we use the AR G3 equipment to simulate frame
relay switch). However, the students are not required to learn the configuration of the FRSW.
If you need to configure the FRSW, run the following commands:
#
sysname FRSW
#
board add 0/1 2SA
board add 0/2 2SA
board add 0/3 2SA
board add 0/4 2SA
#
fr switching
#
ip vpn-instance 102
ipv4-family
#
ip vpn-instance 201
ipv4-family
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %$%$\hu%+49;aL7S9LUb`6c4,XOF%$%$
local-user admin privilege level 15
local-user admin service-type telnet terminal
#
interface Serial1/0/0
link-protocol fr
fr interface-type dce
fr dlci-switch 102 interface Tunnel0/0/1 dlci 120
fr dlci-switch 103 interface Tunnel0/0/1 dlci 130
fr dlci-switch 104 interface Tunnel0/0/1 dlci 140
fr dlci-switch 105 interface Tunnel0/0/1 dlci 150
fr dlci-switch 106 interface Tunnel0/0/1 dlci 160
fr dlci-switch 107 interface Tunnel0/0/1 dlci 170
fr dlci-switch 108 interface Tunnel0/0/1 dlci 180

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 22


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 6 FR Switch Configuration

description R1
#
interface Serial1/0/1
link-protocol fr
fr interface-type dce
fr dlci-switch 201 interface Tunnel0/0/2 dlci 120
fr dlci-switch 203 interface Tunnel0/0/1 dlci 230
fr dlci-switch 204 interface Tunnel0/0/1 dlci 240
fr dlci-switch 205 interface Tunnel0/0/1 dlci 250
fr dlci-switch 206 interface Tunnel0/0/1 dlci 260
fr dlci-switch 207 interface Tunnel0/0/1 dlci 270
fr dlci-switch 208 interface Tunnel0/0/1 dlci 280
description R2
#
interface Serial2/0/0
link-protocol fr
fr interface-type dce
fr dlci-switch 301 interface Tunnel0/0/2 dlci 130
fr dlci-switch 302 interface Tunnel0/0/2 dlci 230
fr dlci-switch 304 interface Tunnel0/0/1 dlci 340
fr dlci-switch 305 interface Tunnel0/0/1 dlci 350
fr dlci-switch 306 interface Tunnel0/0/1 dlci 360
fr dlci-switch 307 interface Tunnel0/0/1 dlci 370
fr dlci-switch 308 interface Tunnel0/0/1 dlci 380
description R3
#
interface Serial2/0/1
link-protocol fr
fr interface-type dce
fr dlci-switch 401 interface Tunnel0/0/2 dlci 140
fr dlci-switch 402 interface Tunnel0/0/2 dlci 240
fr dlci-switch 403 interface Tunnel0/0/2 dlci 340
fr dlci-switch 405 interface Tunnel0/0/1 dlci 450
fr dlci-switch 406 interface Tunnel0/0/1 dlci 460
fr dlci-switch 407 interface Tunnel0/0/1 dlci 470
fr dlci-switch 408 interface Tunnel0/0/1 dlci 480
description R4
#
interface Serial3/0/0
link-protocol fr
fr interface-type dce
fr dlci-switch 501 interface Tunnel0/0/2 dlci 150
fr dlci-switch 502 interface Tunnel0/0/2 dlci 250
fr dlci-switch 503 interface Tunnel0/0/2 dlci 350
fr dlci-switch 504 interface Tunnel0/0/2 dlci 450
fr dlci-switch 506 interface Tunnel0/0/1 dlci 560
fr dlci-switch 507 interface Tunnel0/0/1 dlci 570
fr dlci-switch 508 interface Tunnel0/0/1 dlci 580
description R5
#
interface Serial3/0/1
link-protocol fr
fr interface-type dce
fr dlci-switch 601 interface Tunnel0/0/2 dlci 160
fr dlci-switch 602 interface Tunnel0/0/2 dlci 260

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 23


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 6 FR Switch Configuration

fr dlci-switch 603 interface Tunnel0/0/2 dlci 360


fr dlci-switch 604 interface Tunnel0/0/2 dlci 460
fr dlci-switch 605 interface Tunnel0/0/2 dlci 560
fr dlci-switch 607 interface Tunnel0/0/1 dlci 670
fr dlci-switch 608 interface Tunnel0/0/1 dlci 680
description R6
#
interface Serial4/0/0
link-protocol fr
fr interface-type dce
fr dlci-switch 701 interface Tunnel0/0/2 dlci 170
fr dlci-switch 702 interface Tunnel0/0/2 dlci 270
fr dlci-switch 703 interface Tunnel0/0/2 dlci 370
fr dlci-switch 704 interface Tunnel0/0/2 dlci 470
fr dlci-switch 705 interface Tunnel0/0/2 dlci 570
fr dlci-switch 706 interface Tunnel0/0/2 dlci 670
fr dlci-switch 708 interface Tunnel0/0/1 dlci 780
description BB1-2
#
interface Serial4/0/1
link-protocol fr
fr interface-type dce
fr dlci-switch 801 interface Tunnel0/0/2 dlci 180
fr dlci-switch 802 interface Tunnel0/0/2 dlci 280
fr dlci-switch 803 interface Tunnel0/0/2 dlci 380
fr dlci-switch 804 interface Tunnel0/0/2 dlci 480
fr dlci-switch 805 interface Tunnel0/0/2 dlci 580
fr dlci-switch 806 interface Tunnel0/0/2 dlci 680
fr dlci-switch 807 interface Tunnel0/0/2 dlci 780
description BB1-2
#
interface GigabitEthernet0/0/0
ip binding vpn-instance 102
ip address 11.0.0.1 255.255.255.0
#
interface GigabitEthernet0/0/1
ip binding vpn-instance 201
ip address 11.0.0.2 255.255.255.0
#
interface Tunnel0/0/1
ip binding vpn-instance 102
ip address 12.0.0.1 255.255.255.0
tunnel-protocol gre
source GigabitEthernet0/0/0
destination vpn-instance 102 11.0.0.2
#
interface Tunnel0/0/2
ip binding vpn-instance 201
ip address 12.0.0.2 255.255.255.0
tunnel-protocol gre
source GigabitEthernet0/0/1
destination vpn-instance 201 11.0.0.1
#

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 24


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 6 FR Switch Configuration

we use the AR G3 equipment to simulate frame relay switch.

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 25


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 7 Console Cable Preparation

7 Console Cable Preparation

The contra-Telnet requires standard console cables and the two ends of the cables must be
RJ-45 ports. You are advised to make the cables manually. You can make the console cables
by following the method of making straight-twisted pair cables. The wire sequence is as
follows:
Port Type\No. 1 2 3 4 5 6 7 8
Async White Orange White Blue White Green White Brown
Orange Green Blue Brown
Console White White White White Blue Green Orange Brown
Brown Green Blue Orange

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 26


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 8 Problems Caused by Non-Standard Equipment

8 Problems Caused by Non-Standard


Equipment

You must use the standard equipment contained on the equipment list in chapter 9 "Error!
Reference source not found.Appendixes" when building the laboratory.
The non-standard equipment may cause problems including but not limited to the following
items:
1. The commands are incompatible, or the interface names are not consistent with the ones
in the lab guide.
2. The non-standard equipment is not compatible with devices and protocol features of
HCIE.

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 27


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Guide to Building
The HCDA LaboratoryHCIE Laboratory 9 Appendixes

9 Appendixes

Field Code Changed

HCIE_Equipment HCIE_Equipment ARG3-Install.pdf S5700-Install.pdf


list_v3.3.xlsx _list_v3.3.xlsx

Issue 01 (2011-10-262012-12-3) Huawei Proprietary and Confidential 28


Copyright © Huawei Technologies Co.,
LtdHuawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd

Das könnte Ihnen auch gefallen