Description of Activity: Cable Joint & Termination Work
S.No. Job Activity Step Hazards/Risk Safety Control Measures
1 Take General safety work General safety Skilled person should be on side & correct manual permit handling techniques. Use PPES & work should be safe trained on safe work practices 2 Take isolation permit Electrical Isolation permit prevent from any hazardous electrical accident due to energizetion 3 Opening of Feeder Panel Electrical Test cables with approved test equipment o ensure door that cables are electrically dead .implement he lock out procedure to be implement only by authorized persons and singed off in the sub-station permit book. 4 Work on the VCU Electrical Before starting of the work the voltage of the VCU should be properly isolated. 5 Work at height Fall from height. Lift Ensure 100% tie off tools .cable management to be failure. Personnel places properly .Authorized person is allowed. Use injury full body harness.