Sie sind auf Seite 1von 5

LFT-D PANEL MSDS

Long Fiber Reinforced Thermoplastic by Direct


Compounding(Material Safety Data Sheet)

Distributed by:

#12 San Rafael Extension, Plainview, Mandaluyong City


Tel Nos.: 02 632 1186 / S&M DL: 02 534 4920 loc. 22 Fax No.: 02 532 8703
Email Add: koniceconstruction.sales@gmail.com Website: www.ko-nice.com

Page | 1
Property of Konice Construction Inc.,
I. What is LFT-D Panel?
- Long Fiber Reinforced Thermoplastic by Direct Compounding is a concrete slab
mould that replaces Plywood and Coated Phenolic Board.

Specification: Lenght 1.8meter x Width .6meter x 12mm Thick x 8.2 Kg.

II. Process to manufacture LFT-D Panel:


- The reinforcement of resin which is the polypropylene in the primary extruder and
the reinforcement of glass fiber in the secondary extruder create the product to
produce better performance in tone and duration of service.

POLYPROPELENE also known as polypropene is under the family of thermoplastic polymers


used in a wide variety of applications and unusually resistant to many chemical solvents, bases and
acids. PP is a light colored naphthenic mineral oil with adequate body to seal and separate wooden
and steel forms from concrete.

Molecular Formula : (C3H6) n


Density : 0.855 g/cm3 amorphous / 0.946g/cm3 crystalline
Melting Point : 130 to 171𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑 C. (266 to 340𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑 F; 403 to 444 K)
Maximum Temp. : 275𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑 F. – 135 𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑 C.
Minimum Temp. : 32 𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑 F. – 0 𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑𝑑 C.
Tensile Strength : 4,500 psi.

Page | 2
Property of Konice Construction Inc.,
III. Distinctiveness:

Durability and Tensile Strenght


- Less damage to surface due to optimized structure design.
Reusability
- Remarkably increased number of resuse time up to 50 Times.
Easy Assembly and Stripping
- 10% to 15 % lighter than plywood and phenolic, no need to used form oil release for
the better concrete surface.
Translucency
- No need to used illumination, improve safety and efficiency.
Eco Friendly
- 100% Recycled materials from PP/GF materials.

IV. Environmental Test:


- It has resistances to stand and perform on different conditions.
 Heat Resistance 80° C Cold Resistance (-)40° C
 Moisture Resistance 90° C

V. Material Property:

Head Unit Ksi Mpa Standard Test Result

Color Natural
Gravity g/cm^2 ASTMD792 1.28
Tensile Strenght Kgf/cm^2 18.45 127 ASTMD638 1300
Flexural Strenght Kgf/cm^2 25.55 176 ASTMD790 1800
Flexural Modulus Kgf/cm^2 1,053 7,262 ASTMD790 74000
Izod Impact Strenght Kgf.cm/cm 0.85 6 ASTMD256 60
Shrinkage Rate % 0.1 - 0.2
Percentage of Moisture % 0.05 under
Content
Thermal Defermortion °C ASTMD648 160
Temperature
Percentage of Glass % 45
Fiber
Reuse Time Cycle 50

Page | 3
Property of Konice Construction Inc.,
VI. Load Calculation:
- The derived calculation must be compensated with the recommended distance of
support

Dead Load Live Load Design Load


480 Kg/ m2 250 Kg/ m2 730Kg/ m2
4,709 N/m2 2,453 N/m2 7,158 N/m2

Concrete Load Capacity


Based on Design Value of 7,158 N/m2 = 4 meters concrete x 1m x 1m
Maximum Spacing 300mm if Along Cross Section and 360mm if Longitudinal Section

VII. Comparison between LFT-D Panel vs. Phenolic Board vs. Plywood:

LFT-D Panel Phenolic Board Plywood


Specific Gravity 1.28 0.7 .65 – 7.5
Weight 8.2 Kg. 30 Kg 33.92lbs./15.418kgs
Thickness 12mm 12mm 12mm
Size (L) 1.8m x (W) .6m (L) 2.4m x (W) 1.2m 1.22m x 2.44m
Flexural Modulus 7,262 MPa 7,358 MPa 6,327 Mpa
Flexural Strenght 176 MPa 69 MPa 22.9 Mpa
Light Penatribility
Water Proofing
Quality of Materials PP-FG Wood Wood
Price 1,650 1,200 – 1,600 700
Reuse Time 50 Times and more 6 – 10 Times 7 2 Times

VIII. Savings:

LFT-D Panel Phenolic Board Plywood


1 time to buy 6 times to buy 3 times to buy
Size 1.80m x 0.60m/pc 1.22m x 2.44m/board 1.22m x 2.44m/pc
Area 1.08sqm 2.98sqm 2.98sqm
Quantity 2.65 pcs LFT-D Panel 1 pc of Phenolic Board 1 pc of Plywood
Price Php 1,650/Panel Php 1,200/Board Php 700/Plywood
Cost Php 4,372.50 for 50 times 1,200 for 6 times divided 700 for 3 times divided
into 50 times into 50 times
Savings per usage Php 112.55
Usage/Times 50 times 6 times 3 times
Cost Per Usage Php 87.45 Php 200.00 Php 233.33
% Per Usage 3% 16.67% 33.33%
Electric Saving
Savings in Labor
Used of Form Oil
Time Saving

Page | 4
Property of Konice Construction Inc.,
IX. Design Application:

Page | 5
Property of Konice Construction Inc.,

Das könnte Ihnen auch gefallen