Beruflich Dokumente
Kultur Dokumente
Pavements
testing
systems
› Advanced
Pavements
testing
systems
A d v a n c e d Pave m e n t s t e s t i n g s y s t e m s
Italy
controlsitalia.it
France
controls.fr
Iraq
controlsmiddleeast.com
Mexico
controls.com.mx
Poland
controls.pl
Spain
controls.es
United Kingdom
controlstesting.co.uk
USA
controls-usa.com
pavelabsystems.com
CONTROLS S.p.A.
is certified ISO 9001:2008
controls-group.com
IPC-CG 17/E/CB/3
wfi.co.uk
ipcglobal.com.au
In line with its continual program of
product research and development,
CONTROLS S.p.A. reserves the right to alter
specifications to equipment to any time.
Advanced Pavements testing systems
For more information and details, visit our web site or ask for catalogues.
1
Two great companies with compelling stories,
Controls Group.
2
IPC global–Controls Group will follow
on our tradition of excellence and innovation
and will always strive to:
3
Slab Compactors
Multi Core Drill
Servopac AASTHO
Research En
AASTHO-EN
Servo-Pneumatic
BBR
DSR
Rotational Viscometers
4
Advanced Pavements testing systems
Contents
Analytical Index
Code Index
Standard Index
5
Determination
of Asphalt Mix composition
6
Automatic closed-system asphalt analyzer
7
DETERMINATION OF ASPHALT MIX COMPOSITION
75-PV50A25
Standards
• 8
Distinguishing features of the new generation
7” touch screen swinging panel displays the operating Machine version incorporating balance also available The condenser cleaning operations are
stage and recorded data. Machine software enable the (model 75-PV50A25). The sample can be weighted at the facilitated by an hinged opening of the lid.
test parameters set up. end of each stage and related data are recorded and used
for automatic result calculation. All results, including those
of previous tests, can be recalled for printout reports by the
printer 82-P0172/B. See Accessories.
Removable
washing drum Level indicators are made
of a high resistance material in order
to be compatible with a
extensive range of solvents.
Main features
>> Fully automatic test cycle: • Automatic recovery of solvent >> 7" touch screen swinging panel
• Washing of the asphalt sample by a continuous distillation process >> Version incorporating a balance for an ac-
(up to 3.5 kg) with solvent and ultrasonic • Easy binder recovery for further tests such as curate measurement of asphalt sample
motion, with simultaneous heating penetration, softening point, etc. (10 kg ±0.1 g) also avaiable
and rotation of the drum lined >> High extraction capacity: up to 300 g of filler
with screening mesh • Fast connection for rotary evaporator
flask available as option for each extraction
• High speed extraction centrifuge for separa- Extraction time reduced to approx. 55 >> Automatic sample drying after extraction
tion of filler from binder solution minutes (including drying)
Condensation of solvent vapour in a stainless >> Silent operation
steel tank including cooling coil, conforming >> No toxic fumes in the laboratory conforming
to latest anti-pollution requirements to latest anti-pollution requirements
9
DETERMINATION OF ASPHALT MIX COMPOSITION
Technical specifications
ʰʰ Maximum sample size: 3.5 kg
ʰʰ Centrifuge rotation speed: 6000 rpm
ʰʰ External cup nominal dimensions:
120 x 200 mm (diameter x height)
ʰʰ Maximum filler capacity:
approx. 300 g
ʰʰ Extraction time (including drying of
aggregate and filler):
approx. 55 minutes
ʰʰ Solvent used per extraction: approx.
10 litres (recycled)
ʰʰ Power rating: 6 kW (excluding water
cooling system)
ʰʰ Overall dimensions: approx.
1400 x 750 x 1500 mm (w x d x h)
ʰʰ Weight: approx. 240 kg
10
Alternative washing drum
75-PV5X20
Washing drum, 0.075 mm mesh
75-PV5X30
Washing drum, 0.090 mm mesh
75-PV5X010/C
Washing drum, 0.063 mm mesh with
traceable certificate of wire mesh opening
75-PV5X20
Washing drum, 0.075 mm mesh
75-PV5X020/C 75-PV5X135
Washing drum, 0.075 mm mesh with Solvent
Detail of control panel display traceable certificate of wire mesh opening
75-PV5X200
75-PV5X30
Solvent pumping device for safe solvent
Washing drum, 0.090 mm mesh filling
Solvent testing device
75-PV5X030/C Water cooling system
Washing drum, 0.090 mm mesh with 75-PV5X135
traceable certificate of wire mesh opening Water cooling system providing water
between 10 and 15°C, flow rate 5 litres/
min, pressure 3 bar. 380 V, 60 Hz, 3 ph.
75-PV5X136
Solvent testing device
As above but 220 V, 60 Hz, 3 ph.
75-PV5X110 75-PV5X170
Testing device to verify the stability of
Upgrade with additional electrovalve
recycled solvent from the pH value.
when using cooling tap water
75-PV5X120 75-PV5X180
Solvent stabilizer. 1000 ml bottle. For
Fast connections for cooling pipes
stabilization of recycled solvent.
Centrifuge cup
Ordering information Version incorporating balance
75-PV5X150
Two versions of the analyzer are proposed: 75-PV50A25
-models 75-PV50A15 Centrifuge cup, 120 mm diameter.
PAVELAB 50 Automatic Closed-System
and 75-PV50A16 Asphalt Analyzer for separation and ex- 75-PV0005/2
without accessories. traction of bitumen, filler and aggregates Lining paper for centrifuge cup.
-models 75-PV50A25 from asphalt samples by use of solvents. Pack of 100.
and 75-P V50A26 Complete with integrated scale. 380 V,
without accessories but supplied with 75-PV5X150 75-PV5X160
50-60 Hz, 3 ph.
integrated balance. Device for the extraction of the centrifuge
75-PV50A26 cup.
Same as above but 220 V, 60 Hz, 3 ph.
Connection
Standard version Accessories 75-PV5X100
75-PV50A15 Washing drums cup and closing lid Fast connection for rotary evaporator
PAVELAB 50 Automatic Closed-System 75-PV50/KIT flask, for bitumen solution sampling (to be
Asphalt Analyzer for separation and ex- 75-PV5X010 ordered at time of order).
Kit of accessories complete with:
traction of bitumen, filler and aggregates 75-PV5X010 Printer
from asphalt samples by use of solvents. washing drum, 0.063 mm mesh
380 V, 50-60 Hz, 3 ph. 75-PV5X040 82-P0172/B
75-PV50A16 closing lid for washing drums 24 column serial printer. External battery
Same as above but 220 V, 75-PV5X150 charger and batteries included. 110-230 V,
60 Hz, 3 ph. centrifuge cup, 120 mm diameter 50-60 Hz, 1 ph.
75-PV0005/2
lining paper for centrifuge cup. 75-PV5X040
Pack of 100.
11
DETERMINATION OF ASPHALT MIX COMPOSITION
main features
>> Fully automatic test cycle with simultaneous display of all
test parameters, including weight loss and percentage
>> Highly efficient heating system with additional afterburner for
complete combustion of exhaust fumes,
conforming to CE requirements
>> PID closed-loop temperature control
>> Built-in weighing system
>> Reduced test time of 30-40 minutes
>> Test performance menu comprising the simultaneous
display of all test data
>> Internal database stores up to 100 tests. Each test can be
displayed and printed or sent to a PC via the RS232 port
12
Technical specifications ʰʰ Bi-directional real-time communica- Ordering information
Oven and afterburner tion with the weighing system
ʰʰ Test setting menu, complete with
75-PV0008
ʰʰ Highly efficient heating system with BITUMAX Asphalt binder analyzer by
afterburner for total combustion of physical and descriptive sample
parameters ignition method.
fumes to minimize emissions in ac- Complete with double sample basket/
cordance with CE requirements ʰʰ Calibration menu for temperature and
weight safety cover, extraction fork and 3 metres
ʰʰ No need for filters or hoods = low of metal exhaust ducting. 380 V, 50 Hz,
maintenance costs ʰʰ Optional manual control of test
3 ph.
ʰʰ Sample sizes up to 4500 g for a more performance
75-PV0008/Z
representative test result ʰʰ Test performance menu with simulta-
As above but 220 V, 60 Hz, 3 ph.
ʰʰ Maximum power rating: 10 kW neous display of all test data
ʰʰ Holding power during the test: 3.5 kW ʰʰ Internal database for up to 100 tests.
Each test can be sent to PC, displayed,
ʰʰ Supplied complete with double
printed or deleted
sample tray, fork to handle the pan,
cooling cage and 3 m of exhaust ʰʰ Possibility to connect an external Example of printed report
ducting balance for automatic weight input
(see accessories)
Hardware
ʰʰ Large permanent memory to store Safety features
test results ʰʰ Door is automatically locked during
the test, even if the power is inter-
ʰʰ On-board 40-column serial printer
rupted
ʰʰ Weighing system: 10,000 g capacity,
ʰʰ Door closure is automatically moni-
0.1 g resolution,
tored before the test starts
±0.1 g repeatability
Overall dimensions:
ʰʰ Closed-loop PID thermo-regulation Accessories
590 x 830 x 973 mm (w x d x h)
for both oven and afterburner
Weight: approx.: 125 kg
ʰʰ 240 x 128 pixel large graphic display 75-PV0008/5
ʰʰ RS232 output for PC connection Metal stand for 75-B0008.
Firmware 75-PV0008/10
ʰʰ Language selection Face shield 75-PV0008/2
ʰʰ Clock/calendar
75-PV0008/12 Auxiliary top pan digital balance, 10,000 g
Safety cover for sample basket. capacity, 0.1 g sensitivity, for connection to
Asphalt binder analyzer 75-PV0008 via the
75-PV0008/14 RS232. 230 V, 50-60 Hz, 1 ph.
Additional double sample basket
Extraction fork
(supplied with the machine)
Test setup
Metal stand 75-PV0008/5,
safety visor 75-PV0008/10 and exhaust ducting
(supplied with the machine)
13
Asphalt Sample Preparation
and Compaction
14
Multi Core Drill
Automatic Laboratory Mixer Laboratory Asphalt Core Drill
Electromechanical Multisize
Slab Compactors Asphalt Saws
15
ASPHALT SAMPLE PREPARATION and COMPACTION
Standards EN 12697-35
The design and testing of bituminous mixtures includes various laboratory tests such as Marshall
stability (EN 12697-34), Gyratory compaction (EN 12697-31), Slabs laboratory compaction (EN
12697-33) to prepare specimens for Wheel tracking (EN 12697-22) and Determination of stiffness
including Beam fatigue testing (EN 12697-26, EN 13108).
To produce samples for performing the above tests, it is essential that the preparation of a bitumi-
nous mixture is carried out at a reference temperature and within a limited time period in order to
reduce mechanical degradation of the aggregates. The mixer should also be capable of entirely
coating all mineral substances in not more than 5 minutes as stated by EN 12697-35.
The mixer consists essentially of a horizontal stainless steel mixing container with a helical mixing
shaft. The container is thermally insulated and comes complete with a heating element and probe
sensor which provide uniform temperature control. The container can be easily tilted by the electric
motor for the unloading operation.
The control panel includes: a digital display to monitor mixing temperature, a digital thermo-regula-
tor, a mixing speed controller and various commands
16
Ordering information
77-PV0077/C
BITUMIX automatic laboratory mixer, 30
litres capacity.
380-400 V, 50 Hz, 3 ph.
77-PV0077/CZ
As above but 220 V, 60 Hz, 3 ph.
Technical specifications
ʰʰ Mixer capacity: 30 litres
ʰʰ Mixing speed: adjustable from 5 to
35 rpm
ʰʰ Mixing temperature:
adjustable from ambient to 250° C
ʰʰ Heater: 4500 W
ʰʰ Temperature control:
PT 100 sensor
ʰʰ Tilting angle up to 130°
ʰʰ Power: 7000 W (total)
ʰʰ Voltage: 380-400 V, 50 Hz,
3 ph or 220 V, 60 Hz, 3 ph
ʰʰ Overall dimensions:
1350 x 650 x 1205 (w x d x h)
77-PV0077/C Detail of aggregate loading ʰʰ Weight: approx.
320 kg
77-PV0077/C Detail of unloading. The mixing cylinder is rotated by a motorized tilting system for
easy unloading. The tilting angle is adjustable to 130° to speed up the unloading operation. 77-PV0077/C
17
ASPHALT SAMPLE PREPARATION and COMPACTION
main features
>> The PReSBOX produces a prismatic specimen
with nominal dimensions of 450 mm (length) x 150 mm (width)
x 120 to 185 mm (height)
>> Asphalt prisms prepared in the PReSBOX compactor
can be sawn or cored to produce 4-6 prismatic beams or 1-4 cylindrical
specimens
>> The PReSBOX can be operated by a single person
>> Produces specimens with excellent air void distribution and particle
orientation
>> Designed for an easy unlocking of the compaction mould, facilitating
an effortless specimen extraction at safe height, handling and user safety
18
Specifications ʰʰ Number of cycles: user definable Perfectly Uniform Specimens
(unlimited)
ʰʰ Shearing motion: Electromechanically
ʰʰ Air Supply: clean dry air supply at Asphalt prisms prepared in the PReSBOX compactor can be sawn us-
driven at 4°
minimum 600 kPa ing Universal Automated Asphalt Saw (Autosaw, see page 30) or cored
ʰʰ Vertical stress: Pneumatic user defined
up to 2 MPa ʰʰ Size (h x w x d): using the Multi Core Drill (see page 26) to produce prismatic beams or
1540 mm x 1765 mm x 1050 mm cylindrical specimens suitable for testing in the Asphalt Mixture Perfor-
ʰʰ Specimen size: 450 mm x 150 mm x
120 - 185 mm (l x w x h) ʰʰ Weight: 1100 kg mance Tester (AMPT), Four Point Bend Apparatus, Asphalt Standards
ʰʰ Integrated specimen extruder Tester, TSRSTplus or UTM Systems.
Ordering Information Specimens cut from PReSBOX prisms have identical properties with uni-
ʰʰ Specimen Loading: Easy loading with
included accessory kit (includes: 77-PV46A02 form air voids distribution and particle orientation ensuring consistent
distribution chute, levelling tool & PReSBOX, Asphalt Prism Shearbox and repeatable test results.
comb) Compactor.
ʰʰ Compaction Frequency: 3.7 cycle/min 220 - 240 V, 50 - 60 Hz, 1 ph. Specimens cut from the PReSBOX
+/- 16 s/cycle
ʰʰ Mould hardness: Accessories
50 Rockwell C (minimum)
ʰʰ Platen Hardness: 7-PV71102
50 Rockwell C (minimum) Pneumatic filtration kit - wall mount, 12
ʰʰ Mould Surface: bar.
finish smoother than 1.6 μm 77-PV4602
ʰʰ Loading Platen Size: Heater to pre-heat the box walls.
448 mm x 149 mm (l x w) 220 V, 1 ph
ʰʰ Loading Platen Finish: ʰʰ Prismatic specimen produced by ʰʰ Up to four 70mm wide prismatic
77-PV4604
smoother than 1.6 μm the PReSBOX specimens
Heater to pre-heat the box walls.
110 V, 1 ph
19
ASPHALT SAMPLE PREPARATION and COMPACTION
CUSTOMER’S VALUE
DRIVES THE INNOVATION
Standard model
77-PV41A02
77-PV41A04
General description
(both models)
Electromechanical slab compactors feature a compacting sys-
tem by roller segment head radius 535 mm. The roller segment
freely moves by simple friction for better compaction uniform-
ity. A brushless motor (Standard models), or stepper motor
(advanced motors) moves vertically the roller segment under
displacement control . The vertical load is applied orthogonally
to the axis of the travel motion. The mould carriage moves back
and forth by linear movement. The longitudinal (major) mould
dimension correspond to the compaction direction so it is pos-
sible to obtain specimens of the proper length conforming to
Standards. The lifting machine cover permit an easy access to
the mould area. In the “rest” position, the mould is close to the
operator for easy positioning while the roller segment is lifted
and positioned at the back of the machine.
20
Multisize advanced model
main features
>> Completely electromechanically operated
>> Possibility to program user defined procedures as free combination of load
and displacement (or combined) controlled cycles
>> Completely electromechanically operated
>> Conforming to EN 12697, 5.2 method and D8079
>> 21” All-in-one touchscreen PC controlled , PC and software included
>> Includes the compaction procedure defined in the brand new EN 12697-
33 method 7.3, providing at the beginning a controlled displacement
compaction which can grant a flat surface followed by a load compaction
phase , which can replicate the real compaction on the road surface
>> Base and foot adjustable heating system available as option
>> Mould dimensions: 500 x 400, 500 x 300, 400 x 300, 300 x 300
and 320 x 260 mm, 195 mm height
>> Compaction direction in the longest (major) mould dimension to obtain
specimens of the proper length conforming to Standard
>> Vertical balanced of sliding cover for easy access and complete three side
view
>> Maximum compaction load 30 kN
>> User defined controlled linear speed up to 300 mm/sec and adjustable
pause at the mould inversion point
>> Ideal for producing test beams for 4-Point bending
(EN 12697-24, EN 12697-26, AASHTO T321) and slabs down to 38 mm
>> Vibrating roller option, adjustable from 10 to 50 Hz
>> PRO-COMPACT* closed loop control slabs (see next page)
>> Customization of compacting cycle which can be saved and recalled from
the data base
IMPORTANT NOTE
Performance of the energy controlled compaction procedure conforming to EN 12697-33 Annex 7.3.2
The combined load/displacement compaction procedure provides at the beginning of the test a
controlled displacement compaction, which can grant a flat surface of the compacted slab, followed
by a load compaction phase, which can replicate the real compaction on the road surface.
21
ASPHALT SAMPLE PREPARATION and COMPACTION
*PRO-COMPACT closed-loop.
closed-loop is an innovative
mechanical and electronic
control that combines orthog-
onality of the load, pendulum
motion of the head and sinu-
soidal non-friction forward-
reverse carriage movement.
This results in an optimally
compacted sample that fea-
tures Planarity Regularity and
hOmogeneity (PRO).
22
Technical specifications
Software Firmware
-21’’Touchscreen integrated PC Set up of compaction procedure with displacement control with load,
-Fully programmable PC software operating in Windows® density or thickness limit.
-Set up of customized compaction sequence as free combination of - Selection, customization and storing of test parameters
load/displacement controlled cycles - Customization of the compacting procedure to be saved and
Firmware /Software -Selection, customization and storing of test parameters recalled from the data base
-Customization of the compacting sequence to be saved and - Graphic display of roller vertical displacement vs. number of passes
recalled from the database - Possibility to pre-set a load threshold to start compaction at the
-Graphic display of displacement / force vs. number of passes or contact of the sector head with the specimen
load vs. displacement
Compacting device Roller segment, radius 535 mm Roller segment, radius 535 mm
Adjustable: Adjustable:
300/320 mm 300/320 mm
Back and forth horizontal travel 400 mm 400 mm
500 mm 500 mm
By software By control panel
Roller vibration Yes, adjustable frequency from 10 to 50 Hz (optional) Yes, adjustable frequency from 10 to 50 Hz (optional)
*To produce slabs down to 38 mm thickness. Maximum slab thickness varies with bitumen mixes composition.
23
ASPHALT SAMPLE PREPARATION and COMPACTION
Ordering information
77-PV41C05
Advanced Multi-size electromechanical
slab compactor. For compaction of moulds
500x400 mm, 500x300 mm, 400x300
mm, 300 x 300 mm and 320 x 260 mm,
195 mm high. Includes the compaction
procedure defined in the brand new EN
12697-33 7.3 and the PRO-COMPACT
control feature. Controlled by all-in-one
touch-screen integrated PC, load and
deformation measurement, software
controlled mould travel, performing user
defined free combination of load/displace-
ment controlled compaction sequences.
Supplied without moulds and compaction
sector heads (see accessories).
380V/50Hz/3ph+N
77-PV41C06
Advanced Multi-size electromechanical
slab compactor. Same as above but 220 V, Optimally compacted sample that features
60 Hz, 3 ph Detail of segment head incorporating vibration unit
planary regularity and homogeneity (PRO)
77-PV41A02
Standard Multi-size electromechanical
slab compactor. For compaction of moulds
inserire
500x400 mm, 500x300 mm, 400x300 2 foto su provini
mm, 300 x 300 mm and 320 x 260 mm, perfetti
195 mm high. . Supplied without moulds
and compaction sector heads (see acces-
sories). 230 V, 50-60 Hz, 1 ph
77-PV41A04
Standard Multi-size electromechanical
slab compactor. Same as above but 110 V,
60 Hz, 1 ph
Detail of the vertical sliding cover for easy access and three sides view
24
Accessories (for all models)
77-PV46001
Interchangeable sector head to produce
slabs 500 mm long x 400 mm wide
Detail of interchangeable sector head
Interchangeable sector heads The sector head can be easily removed and replaced to produce slabs of the alternative dimensions.
Upgrading options
complete with heating system
To be completed with 77-PV43012 Temperature Heating control system
control system (see Upgradig options) of sector heads fitted with heating system
(to be specified at the time of order)
77-PV42011
Interchangeable sector head to produce 77-PV43012
slabs 320 mm long x 260 mm wide. Compaction sector heating system. Adjust-
Complete with heating system. able up to 140°C
77-PV46011 77-PV43024
Interchangeable sector head to produce
Vibrating roller option. For 220 V, 60 Hz, 3
slabs 500 mm long x 400 mm wide.
ph models
Complete with heating system.
Moulds
77-PV42102
Steel mould 320x260 mm, 195 mm high,
to be filled at 155 mm max.
25
ASPHALT SAMPLE PREPARATION and COMPACTION
Multi Core-Drill
Asphalt Core-Drill
Specimen preparation and ul- The Multi Core-Drill has been designed to be easy to use, flexible and Technical specifications
timately specimen quality are adaptable providing users with precise drilling capabilities. This will en- ʰʰ Motor speeds*: 540, 1300, 1800 rpm
critical factors in material char- able users to have absolute confidence in the quality of their specimens (for 50 Hz use) and 560, 1300, 1850
and the reliability of their test results. rpm (for 50 Hz use)
acterization. IPC Global’s Multi ʰʰ Cylindrical sample size:
Designed, in particular, for coring samples 100 mm dia., 150 mm high
Core-Drill is a superior laboratory up to 160 mm dia.,
for Dynamic Modulus (AMPT, AASHTO TP79) and 30 to 75 mm high for
asphalt core drill whose robust Indirect Tensile Tests (EN 12697-24 and 26) coming, as example, from max 400 mm high
and rigid design provides a pre- Gyratory compactors. ʰʰ Prismatic samples size:
up to 450 x 180 x 150 mm
cise coring of asphalt prisms, cy- Included as standard the Multi Core Drill comes with the support and ʰʰ Coring diameter: from 38 to 150 mm
lindrical and slab samples to the clamping device that sits inside the stainless steel tray and ensures as- (see accessories)
highest quality. phalt samples produced by IPC Global’s PReSBOX are held firm and in ʰʰ Dimensions:
the correct position for drilling. 1400 x 600 x 800 mm (h x w x d)
The translational movement (Bidirectional movement), combined with ʰʰ Weight: 85 kg
the sliding table, allows to make the largest number of cores from the
same sample (in case of small cores – see images). See upgrading op-
tions.
26
Transversal bidirectional movement
for parallel coring option
The Multi Core Drill can also be provided with an optional device
which allows for up to 80 mm transversal movement of the drill
for parallel coring. This device, in combination with the longitudinal
movement of the carriage, ensures high cutting alignment and
increases the number of cores obtained from the same prismatic
sample.
Bidirectional coring is suitable for 38, 50 and 75 mm dia.
See upgrading options, 76-PV 75200/UP.
To be specified at time of order
Applications
Included support and clamping Transversal coring Coring cylindrical asphalt samples
device The innovative transversal coring A unique, easy and intuitive
Included as standard the Multi clamp system allows users to obtain cylindrical clamp accessory allows
Core-Drill comes with the support cylindrical asphalt specimens in users to quickly and easily core
and clamping device that sits inside 38, 50 and 75 mm dia. This unique asphalt specimens from cylindrical
the stainless steel tray and ensures accessory (see accessories, model samples produced in gyratory
asphalt samples produced by IPC 76-PV75220) ensures that samples, compactors up to 150 mm dia.
Global’s PReSBOX are held firm and both 100 and 150 mm dia., are See accessories 76-PV75210.
in the correct position for drilling. securely clamped whilst drilling The same coring can also be done, as
PReSBOX samples can also be placed is commenced to provide perfect alternative, with the KorBit machine
in the stainless steel sample tray specimens every time model 76-PV75302 standardly
horizontally to allow for coring of supplied complete with adjustable
specimens 150mm diameter. clamp. See page 28
Coring cylindrical asphalt samples Taking transversal coring samples Coring cylindrical asphalt samples
from prisms and slabs Using the suitable accessory Using the suitable accessory
27
ASPHALT SAMPLE PREPARATION and COMPACTION
Multi Core-Drill
Ordering information Upgrading options Core bits 83-C0323
76-PV75200/UP Thin wall diamond type, fixed standard Diamond core bit to take 150 mm dia.
76-PV75202 coupling 1 ¼”W , 400 mm
Upgrade with translation device for trans- sample.
Multi Core-Drill, laboratory asphalt core Total length, for the best alignment, plus
drilling machine with clamps for prisms up versal movement of the drill (up to 80 mm fast and easy
to 450 x 180 mm. Three speeds: 540, 1300, translation) for parallel coring. Suitable for fitting and disassembling. 83-C0322
1800 rpm. 2200 W, 10 A. 230 V, 50 - 60 38, 50 and 75 mm diameter cores. Diamond core bit to take 100 mm dia.
Hz, 1 ph* sample.
Accessories
76-PV75230
Spacer for vertical coring on samples thin-
ner than 120 mm
KOR-BIT machine
for coring cylindrical samples only
Applications
• Cutting of prisms and slabs to be used in • Cutting Prall test specimens according to
Four Point Beam Bending tests according EN 12697-16
to EN 12697-24D and 26B and AASHTO
• Cutting Overlay test specimens according
T321
to TX-248-F
• Cutting of trapezoidal specimens to be
• Cutting Semi-Circular Bend test specimens
used in Two Point Beam Bending tests
according to EN 12697-44 (except for the
according to EN 12697-24A and 26A
notch)
• Cutting AMPT cylindrical specimens round
• Cutting concrete slabs and cylinders
cores
• Cutting accurately 100, 150 and 200mm
• Cutting TSRST specimens according to EN
dia. cylindrical cores to different lenghts.
12697-46 and AASHTO TP10
• Cutting and dressing of Wheel Tracking
slabs or cores according to EN 12697-22
and AASHTO T324
Models available
The asphalt saw is proposed in two versions:
Automated Asphalt Saw model 77-PV47105 and Asphalt Saw, model 77-PV47005 and 77-PV47006,
77-PV47106, featuring high precision automated performing, in manual mode, all the cutting op-
specimen clamping and sawing and protection eration of the Autosaw II automated model.
cabinet which is essential in working environ-
ment not to be contaminated by powder, humid-
ity and water spray.
29
ASPHALT SAMPLE PREPARATION and COMPACTION
The Autosaw is an automated specimen clamping and sawing system The protection cabinet ensures easy access for sample
for fast, accurate cutting of beams from asphalt prisms prepared in the setup, safe operation and protection from spray
during cuts.
PReSBOX or slab compactor and for trimming cylinders from GALILEO, Several automatic locking doors on the front, back
GYROCOMP, SERVOPAC and other gyratory compactors. An easy-to-use and top of the saw prevent the operator from
spacer system sets the specimen position and allows beams or cores to accessing the dangerous areas while the blade is
be cut without the need for measurement. The saw blade advances and turning.
Once the cutting procedure finishes the system
retracts to the home position automatically. The Autosaw includes the ensures the blade is completely stopped before the
multislab jig. Completed with the suitable accessory, can be used to cut doors can be unlocked.
also asphalt cores at the desired length. It can be fitted with 650 mm dia. The protection cabinet also features catchment
blade with a maximum cutting depth of 200 mm and prism length of trays that collect the cooling
water and allows the
500 mm (extendable to 700 mm, on request). Cutting speed is operator saw to operate in a
selectable for optimum specimen finish and throughput. The asphalt laboratory
saw allows an easy-to-use sawing system for fast, accurate cutting of environment without
beams for asphalt prisms to be used in the different tests. Complete contamination.
with table and clamping device for slabs, water pump for cooling the
blade and filtering system.
Cutting blade and accessories to cut asphalt cores are not included. See
accessories. The machine include operator protection cabinet which is
also essential in location not to be contaminated by powder, humidity
and water spray.
30
Designed with easy-to-use spacers and automatic controls that allow for Protection cabinet with several automatic locking
perfect specimen dimensions for AASHTO,ASTM, EN, AS and other inter- access doors to ensure unparalleled safety and
national Standards without the need for manual measurement clean operation in laboratory environments.
77-PV47013 Manual core docking jig for 100/150 mm dia. coree 77-PV47020 Trapezoidal specimen jig for two point bend
31
ASPHALT SAMPLE PREPARATION and COMPACTION
Specifications
Blade diameter 650 mm
Max cutting depth 200 mm
Cores* 100, 150 or 200 mm dia.
Prism length* Max 500 mm
Length, perpendicularity and flatness +/-1%
Accuracy
max., according to Standards
Blade speed 1400-1680 rpm (50/60 Hz)
Blade traverse 0-200 mm/min (variable speed)
Blade retraction traverse 0-999 mm/min (variable speed)
Clamping device for slabs included in AutosawII e Multisaw
Air supply for clamping 700 kPa min
Automatic speed control with variable stop and
Cutting advancement
retract control sensors
Water recirculation pump and stainless steel tank
Cooling
(included)
Power supply 5 kW
Voltage 400 V, 50 Hz, 3 ph or 220 V, 60 Hz, 3 ph
Dimensions (l x w x h) 2000 x 800 x 1700 mm
Weight approx. 650 kg
Accessories 77-PV47025
Important note All the following accessories Jig for Wheel Tracking cores according Jig for prisms and slabs. Supplied with the machine.
are also suitable for the MULTISAW 77- to AASHTO T324 and for Semi-Circular
PV47005 manual model, except for the
77-PV47011 Automatic core docking jig. Bending Tests according to EN 12697-44
(except for the notch), and for Disk Shaped
Compact Tension Sample according
77-PV47011 to ASTM D7313. Notch and holes not
Automatic core docking jig for round included. 77-PV47011 or PV47013 is also
cores, 100 or 150 mm diam., to cut required.
automatically samples from 10 to 200 mm
length. 77-PV47030
Jig for Texas Overlay Test according to
77-PV47013 TX-248-F. 77-PV47011 or PV47013 is
Manual core docking Jig for round cores, required.
100 to 150 mm diam., to cut samples
with manual feeding, from 10 to 300 mm 77-PV47000/1
length. Diamond blade 650 mm dia. 77-PV47025 Wheel tracking core, Semi circle and Disk shaped compact
tension specimen jig (77-PV47011 or 77-PV47011 also required)
77-PV47000/2
Sacrifical PVC tube for 100 mm dia. cores.
32
Asphalt saw
main features
>> Specifically designed to fulfill the stringent requirements of the
relevant Standards in terms of precision, planarity and perpendicularity
of the specimens.
>> High rigidity and stability
>> Slab and prism of any shape and dimensions can be sawn without
additional accessories (see table for maximum dimensions)
>> Jig for round cores, from 100 to 150 mm and for 200 mm dia,
length up to 300 mm
>> Unique clamping mechanism for cylindrical specimens minimizes speci-
men damage. Use of a sacrificial PVC tube produces a superior finish and
minimizes edge chipping of asphalt samples
>> Easy spacer system allows precise preparation of beams or cores without
the need for measurement i.e. 50 x 63 mm or 70 x 70 mm or other sizes
>> Manual advance and retraction of saw blade to home position
>> Motor mounted on twin chrome-plated steel rails with sealed bearings
>> Also suitable for concrete and rock samples
33
Rheological properties
of bituminous mixtures
34
Gyratory Compactor HAMBURG | Double Wheel Tracker
AASTHO
Research
Gyratory Compactor DRY | Double Wheel Tracker
EN
Servopac
Gyratory Compactor
35
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
RESEARCH
Gyratory Compactors
Gyratory Compactors
The most extensive Gyratory Compactor
range available, designed to satisfy all
demands: from the stringent requirements
of Research and Central Laboratories
to the routine applications of on site and
mobile laboratories
Exclusive and extensive range:
ʰʰ from the light and portable standard model GYRO-
COMP, ideal for routine testing, production control The GALILEO
and suitable for installation in mobile laboratories Gyratory Compactors
represent probably the
ʰʰ to the highly sophisticated GALILEO that provides
exceptional and unique performances, conforming most evolved models
to all the relevant Standards. currently available
on the market.
ʰʰ to Servopac, the world renowned tried and trusted
Gyratory compactor.
36
GALILEO fully electromechanical GALILEO 78-PV20G02 version can be upgraded The method can be used for:
Gyratory compactors as option with motorized integrated extruder,
shear measurement system and PC software ʰʰ Preparation of specimens of a given height at a
Models available in two versions: predetermined density, for subsequent testing
GALILEO Research 78-PV20R02 version of their mechanical properties;
78-PV20G02 GALILEO includes the motorized integrated Extruder, the ʰʰ Derivation of a curve of density versus number
78-PV20R02 GALILEO Research Shear measurement system, the Electrome- of gyrations;
Common features (see details on page 43) chanical Automatic EmS angle measurement
ʰʰ Void content for a given number of gyrations.
system (set and displayed on the control panel)
A robust precision-engineered steel structure and PC software. Standards apply to bituminous mixtures
incorporating the EmS Electromechanical (made either in laboratory or from on-site
Common upgrading options sampling), with aggregates not larger than
servo-actuation mechanism for vertical load
application and “Orbital” proprietary gyration Both versions, GALILEO and GALILEO Research, 37.5 mm. During operation the bituminous
and mould rotation system (Patent pending) can be upgraded with an integrated balance mixture is contained in a cylindrical mould
delivering highly accurate and repeatable to weight and to calculate the density, and the (100 or 150 mm diameter). Compaction is
test results, together with stiffness and angle traceable calibration certificate conforming EN achieved by the simultaneous application
stability values that fall comfortably within Standard. See page 43. of a low-static compression and a shearing
the limits defined in EN 12697-31. The large action, which results in the motion of the
7” user-friendly integrated colour touchscreen centre-line of the test piece, which generates
control panel shows the test graph in real time. Operating principle a conical surface of revolution while the ends
Standards specify the method for compac- of the test piece remain approximately per-
The on-board firmware includes nine lan- pendicular to the axis of the conical surface.
tion of cylindrical specimens of bituminous
guages and also offer the option to control the
mixtures using a gyratory compactor. Such
tests from a PC.
compaction is achieved by combining a
A traceable calibration certificate conforming rotary shearing action with a vertical static
ASTM & AASHTO Standards is also included. force applied by a mechanical head.
37
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
• User defined axial stress and speed • Lightweight yet robust moulds
of rotation. strictly comply with international
standards.
• Sliding transparent door
with safety interlock. • Safe and easy mould insertion and
extraction with automatic lifting
• Catch tray to collect expelled liquids ensures low effort for the operator
using perforated moulds. and higher productivity.
38
RESEARCH
Fully electromechanical
No compression air required
39
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
Figure 1 shows a diagram of the ORBITAL system The gyratory motion of the specimen is generated
which is characterized by the rotation of the mould by the rotation of the mould around its own axis.
around its inclined axis and the micrometrical An external observer sees the mould rotating
adjustment of the gyratory angle from 0° to 3° around its own inclined axis on the pre-set gyra-
by means of a mechanical device—in the Galileo tory angle, figure 2A. However, if the observer
version - or by the EmS electromechanical servo were positioned at the specimen centre, he would
actuation technology - in the Galileo Research ver- see the gyratory motion of the specimen itself, as
sion (see next page). shown in fig. 2B.
An example of this is what we notice as we stand
on the earth. We see the sun rotating around the
The result of the load pressure on the specimen earth, when in fact the opposite is true: the earth is
and the well know self balancing tendency of the rotating around itself (and around the sun). Hence
gyratory axis keep the mould against two roller Galileo’s famous exclamation: “And yet it moves”.
bearings placed on 120° at the rear, leaving the
This is why we have named this system “ORBITAL”,
front access and the entire front of the machine
the ingenious, patent-pending mechanism at the
completely free.
Figure 1 heart of the Galileo gyratory compactors.
Performance much higher than The mould design is simple and Mould easy to place and remove Integrated shear resistance
standard requirements lightweight Access to the front is completely free. measurement
The simple rotation of the mould around The gyratory motion and maintenance of No locking-unlocking operations are Measurement of shear strength and resist-
its own inclined axis on the pre-set gyra- the gyratory angle do not require sliding required to place or remove the mould. ing torque is integrated in the machine.
tory angle ensures a precise and regular and friction-affected mechanisms; instead An automatic lifting-lowering mechanism No accessories are required, thus avoiding
motion, maintaining the gyratory angle the mould rests on two roller bearings, moves the mould on sliding PTFE guides any gyratory angle inaccuracies.
constant at all stages of rotation and which also ensures silent, regular and making insertion and or extraction of the
therefore throughout the test. precise motion. The mould‘s thickness and mould effortless.
The direction of the reaction force to the hardness conform strictly to standards.
gyratory angle is constant. This allows the It has no bumps or appendages and it is High productivity
machine frame to be very simple yet ex- light, easy to handle and hardwearing. The extrusion of the specimen while an-
tremely rigid. The result is test parameters other test is in progress (and the optional
which far exceed the Standard require- integrated balance) enable continuous use
ments shown on page 43 and declared in of the machine for high productivity.
the calibration certificate supplied with the
machine.
Safe and easy mould insertion and extraction with automatic lifting ensures low effort
for the operator and higher productivity.
40
figure 2 B
Galileo gyratory compactors benefit ʰʰ Sophisticated PID closed-loop load control, ensuring load is reached fast,
from IPC Global’s new EmS “Electrome- smoothly and accurately and then maintained with precision throughout the
chanical Servoactuation” technology. test within 2% of every gyration (far exceeding relevant standards). The load cell
EmS technology is environmentally friendly and clean to operate, requiring feedback allows high load accuracy from very low loads, making Galileo suitable for
no compressed air or hydraulic oil. It offers excellent reliability, accurate te- special applications, like fresh concrete compaction. This performance is not pos-
sting and lower maintenance requirements. The intuitive design ensures it
sible with traditional indirect measuring systems such as pressure transducers.
can be quickly and easily maintained.
The components of the EmS “Electromechanical Servoactuation” system are: • Closed-loop angle setup and control system mean that the gyratory angle can be
set at the start of the test and be maintained constant at a fixed angle (between
• Vertical load application system, including:
0° and 3°) throughout the test, with precision and accuracy unachievable by
ʰʰ Loading by high performance motor, able to deliver 17kN
traditional systems, with open-loop mechanical adjustment of the angle. The
ʰʰ Direct load measurement by load cell electronic control allows the user to set the automatic mould return to 0° at the
ʰʰ Horizontal recirculating ball linear guides for the upper carriage, enabling end of compaction, to obtain specimens with perfect perpendicularity between the
a high precision parallelism factor between upper and lower plates, far parallel faces and the cylindrical surface.
exceeding the limits of relevant standards
Electromechanical
Servoactuation
technology
41
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
ʰʰ User input of test parameters, choosing from preset pattern related to relevant ʰʰ Calibrating of transducers with a highly accurate interpolation to assure the most
standards or user customizable patterns. The servo-controlled operation of the precise data acquisition
machine allows vertical stress, rate of gyration and gyratory angle* to be quickly
modified from the control panel or PC ʰʰ Diagnostic features to quickly check all the machine devices; moreover, the LAN/
Ethernet communications port allows for direct remote connection via the intranet
ʰʰ Displaying and plotting either:
or internet for an immediate diagnostic analysis from manufacturer.
} height } load
} density } hear stress The software includes a wizard guided mode to help and assist the operator throughout
} angle } compaction energy the compaction procedure steps.
against gyratory cycles in real time. Test data may be stored and retrieved or transferred to *Research version only
other software analysis packages.
Technical specifications
43
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
Accessories
Cylinder moulds and
distance plates.
(Suitable for all our gyratory compactors:
GALILEO, GALILEO research
and GYROCOMP).
76-PV0250/2
Cylinder mould, 150 mm diameter. Com- 76-PV0250/10, 150 mm dia. mould with holes 76-PV0250/6, 76-PV0250/5, 76-PV0250/4, 76-PV0250/3, 76-PV0250/2
plete with top and bottom plates. for cold mix compaction
76-PV0250/5 76-PV0250/6
Cylinder mould, 100 mm diameter. Com- Distance plate, 100 mm diameter, 38 mm
plete with top and bottom plates. high, for preparing short samples
76-PV0250/10 76-PV0250/4
Cylinder mould, 150 mm diameter, with Accessories for compacting 100 mm
holes for cold mix compaction. Complete diameter specimens, including 100 mm
with top and bottom plates. height calibration device
44
Internal angle measurement apparatus
main features
>> Accurate calibration of internal angle of Gyratory compactors and
verification of frame stability, to international standards
>> Quick and accurate measurement of the internal gyratory angle: less than
30 minutes
>> No hot mix required: when, placed into the mould, the device reproduces
the internal shearing forces generated by the hot mix during compaction
>> The variation of the gyratory angle (e.g. from ASTM to EN) is quick and
easily verified
>> Ideal for periodic verification of the internal gyratory angle
>> Compatible with any make of Gyratory compactors
>> Battery operated
45
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
Gyratory compactors
main features
The ideal solution for on-site >> High productivity, design for continuos and heavy use
laboratories for production >> High rigidity thus light weight due to the proprietary ORBITAL system
control. Light and portable, >> Also ideal for mobile laboratories
can be easily installed in >> Very reliable and accurate
mobile laboratories. >> Certified to EN and AASHTO
Very attractive price/quality >> Approved as Superpave™ Gyratory Compactor in U.S.A.
ratio. Thousands of units >> Integrated touch-screen control panel with large display
operating successfully all >> Sliding transparent door
over the world.
>> Full safety and ergonomic design
>> Integrated electromechanical extruder option
>> 2 years full warranty
Standards EN 12697-10 | EN 12697-31 | ASTM D6925 | AASHTO T312 (TP4) Operating principle
| SHRP* M002 | AS 2891.2.2 *Strategic Highway Research Program It is based on the motion of the bituminous sample which generates a conical surface of
revolution, characterized by the gyratory angle. This motion produces shearing forces and,
Robust yet light and with high stiffness steel monocoque structure, consequently, sample compaction.
incorporating a pneumatic cylinder for vertical load application and
propriety electromechanical gyration and mould rotation system, deliv- High stiffness frame
ers highly accurate and repeatable test results, together with stiffness The very rigid but lightweight frame is due to the exclusive body design, resulting in high
and angle stability that fall comfortably within the limits defined in EN rigidity values exceeding the EN 12697-31 Standards
12697-31. The large user-friendly integrated touch-screen control pan-
el, shows the test graph in real time. The on-board firmware includes Change of internal gyratory angle
twelve languages making the interface suitable for local user needs and The internal gyratory angle can be easily and quickly changed to any value, between 0.7
also offers the option to control the tests from a PC. and 1.4°, following a factory calibrated conversion scale.
The machine can be fit with the electromechanical extruder.
See accessories. Periodical verification and re-calibration
The machine is supplied complete with height calibration tool, PC soft- The Gyrocomp compactors can be easily verified and re-calibrated by the operator, using
ware, air hose, operating instructions and calibration certificate. Avail- the ILS Internal angle measurement apparatus model 76-PV0255 (see page 45). This
able in two versions. apparatus is verified with traceable (ACCREDIA) calibration instruments.
76-PV2522
conforming to AASHTO/ASTM Standards and
76-PV2522/E
conforming to EN standards
Models preset to ASTM/AASHTO are supplied complete with Accredia traceable certificate
of load, displacement and internal angle. Models preset to EN are supplied complete with
Accredia traceable certificate of load, displacement and internal angle, including all the
parameters required in EN 12697-31 Annex C (“stability factor”, “parallelism factor”, “full
rotation factor”).
Cylinder moulds, distance plates and air compressor not included. See accessories. Example 0f single test processing with PC software
46
Technical specifications
ʰʰ Compacted specimen size: 150 and Integrated touchscreen control panel
100 mm dia.
ʰʰ Sample height: 80 to 200 mm (150 Transparent sliding cover
mm)-50 to 125 mm (100 mm)
ʰʰ Consolidation pressure:
80 to 800 kPa (150 mm) -160 to 1400
kPa (100 mm)
Compact and lightweight
ʰʰ Internal angle of gyration:
Adjustable from 0.70 to 1.40 °.
ʰʰ Preset to 1.16° internal angle
(76-B2522, ASTM/AASHTO models)
ʰʰ Preset to 0.82° internal angle Completely safe and ergonomic design
(76-B2522/E, EN models)
ʰʰ Speed of gyration:
adjustable from 15 to 60 rpm Optional integrated
ʰʰ Number of gyrations: electromechanical extruder
adjustable up to 999
ʰʰ Test programmable either by number High productivity
of gyrations or specimen height
ʰʰ Communication with PC:
RS 232 connections
Accessories
ʰʰ Internal memory: thousands of tests
ʰʰ Power rating: 1000 W Cylinder moulds and
distance plates
ʰʰ Dimensions (including extruder Suitable for all our Gyratory compactors.
bench, wxdxh): 502x753x1940 mm For detailed information see page 44
ʰʰ Dimensions (wxdxh):
469x615x1130 mm Integrated worktop with extruder
76-PV2520/15
Ordering information Integrated work top with electromechani-
cal specimen extruder. 230 V, 50-60 Hz,
76-PV2522 1 ph
GYROCOMP gyratory compactor, internal 76-PV2520/15Z
angle of gyration preset to 1.16° to Integrated bench top with electrome-
AASHTO T312/ASTM D6925. 230-110 V, chanical specimen extruder. 110 V, 60
50-60 Hz, 1 ph Hz, 1 ph
The bench top with extruder fits the
76-PV2522/E GYROCOMP perfectly resulting in an
GYROCOMP gyratory compactor, internal ergonomic solution that aids the operator.
angle of gyration preset to 0.82° l to EN The Electromechanical 550 W motor
12697-31 Annex C. with speed reducer produces a maximum
230-110 V, 50-60 Hz, 1 ph load that is also suitable for cold mix Integrated worktop with electromechanical extruder option 76-PV2520/15
specimens.
Note All models nominally comply to EN ʰʰ Dimensions: 502x753x808(h) mm Internal angle measurement
12697-10, EN 12697-31, ASTM D6925, ʰʰ Weight approx.: 45 kg apparatus
AASHTO T312 and SHRP M-002. The only 76-PV0255
difference between the 76-PV2522 and Air compressor
the 76-PV2522/E versions, is the angle of ILS Internal angle measurement apparatus
gyration, factory set to ASTM/AASHTO or to 76-PV0250/7 (For detailed information see page 45)
EN standards. This means that it is possible, Low noise air compressor. 230 V, 50 Hz
with our intervention, to upgrade from one
version to the other the angle of gyration. 76-PV0250/7Y
Low noise air compressor. 220 V, 60 Hz
76-PV0250/7Z
Low noise air compressor. 110 V, 60 Hz
47
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
Servopac
#1
Research
main features
Gyratory Compactor
Worldwide >> User defined setting of axial stress, gyratory angle and speed of
rotation:
>> Measure the shear stress during every gyratory cycle
>> Users can set the desired compaction parameters from either the optional
hand-held control pendant or a Windows PC
>> Four column loading frame design provides superior stability
>> Designed for easy specimen insertion, extraction, and user safety with the
integrated specimen extruder
>> Robust and reliable to withstand any laboratory environment
>> Produces large cylindrical specimen with diameters of 100mm or 150mm
and heights of 50mm-170mm
>> Only requires air and power to operate
48
Axial load is applied using a digital Emergency stop button immediately
servo-controlled pneumatic actuator. stops machine operation for user safety
The built-in load cell and displacement
transducer provide precise force and
displacement control
Hand held control pendant with an
integrated key-pad and liquid crystal
Lower and raise the mold at a touch of display for easy operation.
a button, with the easy access buttons
allowing for quick test set up and Safety glass door with built-in interlocks
specimen removal. completely enclose the compaction
chamber for complete user safety and
easy viewing
Four column frame provides superior
stability
Initiate sample extraction with the
Pneumatic specimen extraction unit easily accessibile extraction button.
extracts the specimen safety from the
mould without manual handling.
Included as standard the Servopac
stand allows for operation at an optimal
height
Accessories 78-PV20005
78-P8000/PC 30 kN Steel proving ring
Personal computer with IPC Global UTS 78-PV20006
test software loaded Servopac calibration spacers kit
78-PV20001 including spacer 200 mm, spacer 50
mm, spacer 116.7 mm, three angle
Control pendant
calibration spacers and three angle
78-PV20002 calibration gauges
Servopac 100 mm mould assembly 78-PV20007
78-PV20003 Sample Prep filter paper 100 mm
Servopac 150 mm mould assembly 78-PV20008
78-PV20004 76-PV20003 76-PV20006
Sample Prep filter paper 150 mm
Servopac angle verification kit including 79-PV71102
dial gauge
Pneumatic filtration kit – Wall mount
12 bar
49
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
50
Machine body either an air or water environ-
Sheet steel, powder coated. ment. In both systems a water
Transparent sliding cover. level of about 20 mm above the
sample has to be maintained.
Loaded wheel system Where a heated air environment
The wheel load is 700/705 N or is specified, the specimen, during
adjustable in 100 N steps from testing, must be maintained at
700 to 1500 N in the Univer- the specified temperature ±1°C.
sal AASHTO/EN version models All versions fully satisfy and ex-
77-PV33D05-06 only. The system ceed the above requirements: the
includes a motorized lifting sys- temperature accuracy is ±0.5°C.
tem for raising the wheel assem-
bly at the end of the test. Temperature controlled cabinet
The Universal AASHTO/EN ver-
Wheel tracking carriage sion models 77-33D05-06 feature
The wheel is moved 230 mm an inbuilt temperature controlled
backwards and forwards on the cabinet for testing in air or in wa-
top of the slab, which is fixed. ter, designed to avoid condensa-
The speed is adjustable via the tion problem (in water testing)
PC from 20 to 30 cycles per min- and prevent overtemperature Detail of the motorized lifting system that raises the wheel assembly at the
which may damage the mechani- end of the test, making the use of hoists obsolete.
ute (40 to 60 passes). The longest
slab dimension is oriented to the cal parts or alter the transducer
wheel’s direction of travel. Special accuracy. Furthermore the system
slab moulds for circular samples ensure thermal stability and pro-
obtained from coring or gyratory vide rapid test start by fast initial
compactors are also available. See temperature increase, and auto-
accessories. matic test start when the con-
ditioned temperature has been
Temperature control system reached.
The AASHTO Hamburg type
Standard states that the test must Impression measurement system
be performed in a water bath Each wheel is fitted with RUT
with a temperature range of 25 to DEPTH transducers for measuring
70° C±1°C, whilst the EN requires deformations from 0 to 25 mm
±0.01mm (rut depht).
51
RHEOLOGICAL PROPERTIES OF BITUMINOUS MIXTURES
52
Available versions
CONTROLS offer three versions which satisfy all Standards requirements
Common specifications
Testing mode in water in air in air and water in air and water
PV33B05 PV33B06
PV31A16* * PV31A26
Models 77 PV32E05 PV33E05 PV33D05 (1500 N)
PV31A15* * PV31A25
PV33D06 (1500 N)
Descriptions DWT Hamburg type double wheel DWT double wheel tracker, DWT double wheel tracker, DWT, Hamburg and EN type, double
tracker, wet conditioning version dry conditioning version wet and dry conditioning wheel tracker, interchangeable
version wheels (steel for AASHTO and rubber
for EN), wet and dry conditioning
Air: Air:
Three 1200 W electronically Three 1200 W electronically
Temperature control controlled air blowers controlled air blowers
Three 1500 W heaters,
method re-circulating pump, Three 1200 W electronically
Water: Water:
(accuracy ±0.5°C for automatic filling controlled air blowers
Three 1500 W heaters, Three 1500 W heaters,
both water and air) and control level*
re-circulating pump, re-circulating pump,
automatic feed automatic feed
and control level and control level
54
Double Wheel Tracker
Universal Hamburg type and EN 12697-22
Including 1500 N wheel load versions Accessories
Standards AASHTO T324 and EN 12697-22 (Small Size Device) (common for all versions)
Interchangeable Stainless steel or rubber wheels 203 x 47/50 mm (diameter x width) Some guidelines on how you can complete the actual DWT range in different configurations:
77-PV3/001 77-PV3/005
Set of two moulds for 400x300mm Set of trays with handles for double
samples, thickness from 40 to 100mm, 150 mm diameter cylindrical samples,
recommended for test according to EN conforming to AASHTO T324. 77-PV3/003
12697-22 in water or in air. adaptors for 150 mm dia. cylindrical
sample to be ordered separately
(see accessories)
77-PV3/002
Set of two moulds 360 x 300 mm (also
suitable for 320 x 260 mm samples by
using 20 mm thick plaster spacers), thick-
77-PV33B05/06 ness variable from 40 to 100 mm.
For tests conforming to AASHTO T324 in
wate
Note: Other models are available on order
Water and air conditioning Upgrading Options
series common to all models:AASHTO and EN
Spare moulds for all models
77-PV33B05 Lifting system
DWT Wet and Dry Universal double wheel Moulds for Universal
77-PV3UP10 AASHTO/EN models
tracker. .
Conforming to Hamburg type AASHTO System for the independent lifting of the (77-PV33D05, 77-PV33D06)
T324 and EN 12697-22 Small Size Device, loading wheel at the rut target, continuing
in-air and in-water conditioning. Complete the test,without interruption with the 77-PV3/011
with both stainless steel and rubber other wheel.
Set of two moulds 400x300 mm, 38 to
wheels, laptop PC, software and clear To be specified at time of order
120 mm height
trasparent sliding doors. Set of moulds to 77-PV3/003
be ordered separately (see accessories). Additional Temperature Probes
Set of two mould adaptors for double 77-PV3/012
380V/50Hz/3ph+N 77-PV3UP20 150mm dia core (total 4 adaptors made of
77-PV33B06 special self lubricating acetal copolymer), Set of two moulds 360 x 300 mm (suitable
Additional two temperatures probes to
As above but 220 V, 60 Hz, 3 ph. thickness 60 mm, fitted in 77-PV3/002 for 320x260 mm slabs), 38 to 120 mm
monitor the two sample temperatures.
360 x 300 mm moulds (not included). height
To be specified at time of order
For test conforming to AASHTO T324 in
77-PV33D05
Water Tank cover water
DWT Wet and Dry Universal double wheel
tracker. . 77-PV3UP30
Wheel load adjustable up to 1500N (by Water tank covers.
100N steps). Conforming to Hamburg type (Only for 77-PV31A16/5 models)
AASHTO T324 and EN 12697-22 Small Size
Device, in-air and in-water condition-
ing. Complete with both stainless steel
and rubber wheels, laptop PC, software
and clear trasparent sliding doors. Set
of moulds to be ordered separately (see
accessories). 380V/50Hz/3ph+N
77-PV33D06
Same as above but 220 V, 60 Hz, 3 ph
55
Advanced Dynamic Testing
56
Universal Testing Machine, 16 kN Asphalt Mixture Performance tester
Servo-Pneumatic
57
ADVANCED DYNAMIC TESTING
This section covers the IPC Global’s unique range of Advanced Dynamic
Testing Systems.
Developed over more than 25 years of continuous innovation, our
dynamic range provides solutions to meet all customer needs; from
leading research to quality control laboratories.
kN kN kN
16 30 130
30
IPC Global UTM-16P, Servo-pneumatic IPC Global UTM-30, Servo-hydraulic IPC Global UTM-130, Servo-hydraulic
universal testing system 16 kN capacity, Universal Testing Machine 30 kN cap., Universal Testing Machine 130 kN cap.,
including Dual Axis Control & Data two versions: with tie-rod sealed two versions: Standard and Extra Large
Acquisition System IMACS, 16 kN actuator or advanced labyrinth actuastor, with increased dimensions of testing
Servo-pneumatic actuator assembly, with both including Dual Axis Control & chamber, both including Dual Axis
High-performance servo-valve and built Data Acquisition System IMACS, with Control & Data Acquisition System
in LVDT (±16 mm) w/ In-Line Conditioner high-performance servo-valve and IMACS, 130kN Servo-hydraulic actuator,
(ILC), loading frame, pneumatic reservoir built-in LVDT (+/-50mm) with/ In-Line with high-performance servo-valve and
assembly, load cell (± 20 kN) w/ ILC. Conditioner (ILC), load frame with built-in LVDT (+/-50mm) with/ In-Line
Available in two versions: Standard and motorized crosshead positioning & Conditioner (ILC), load frame with/
with motorized crosshead. hydraulic crosshead clamping, hydraulic hydraulic crosshead positioning &
See page 64 power supply, load cell (+/-30kN) with/ clamping, hydraulic power supply, load
ILC. cell with/ ILC.
See page 66 See page 68
58
ASPHALT Testers with
upper environmental chamber
kN
250
59
ADVANCED DYNAMIC TESTING
AMPT Pro - Asphalt Mixture Servo-Electro-mechanically Thermal Asphalt Multi-Test System with
Performance Tester , complete with operated Asphalt Mixture Performance one, two or three test stations, Load
19kN static / 17kN dynamic actuator Tester for QC/QA tests, complete Capacity 22.5kN*, actuator stroke 30mm
with labyrinth bearing, automatic with 15kN static / 10kN dynamic EmS (+/-15 mm), pneumatic actuator, fully
confinement cell with integrated actuator, automatic confinement cell with integrated : with IMACS digital control
temperature control, -5 to +70°C range, integrated temperature control, 0 +60°C and data acquisition system.
20kN load cell, 30mm actuator LVDT, range, 20kN load cell , 30mm actuator See page 100
225kPa pressure transducer, -5° +80°C LVDT, 300kPa pressure transducer, -25°
temperature transducer, Hydraulic +80°C temperature transducer and
power supply and IMACS. IMACS.
See page 84 See page 86
60
N E W! Unique ground breaking technologies
As the recognised technologi- The main benefits of the EmS technology are:
cal and market leader in ad- >Improved
> dynamic performance over servo-pneumatics
vanced asphalt testing, we are proud and excited to once >Stand-alone
> with no need for compressed air supply
again break new ground with a radically new approach >Lower
> maintenance
to meeting our customers’ needs and requests. Unique, >Robust
> and durable giving a more resilient solution
innovative Servo-Electromechanical technologies have been >Compact
> design requiring, in general, a smaller footprint
>More
> cost effective (better than pneumatic systems in
developed and are now being employed in a number of our terms of economy)
newest product releases – DynaQube, AsphaltQube. >Easy
> to use
Servo-Pneumatic
Servo-Pneumatic Four Point Bend IPC Global’s Integrated Multi-Axis Control
Apparatus including IMACS digital control System (IMACS) delivers leading edge
and data acquisition system, sinusoidal or performance, unparalled real-time
haversine controlled strain or controlled computer control and flexible data
stress loading, controlled force, motorised acquisition. With up to 8 expandable
specimen clamping. control axes and 32 data acquisition
See page 98
channels, you can have total confidence
in your testing results.
Three versions available: for Servo-
Hydraulic, Servo-Pneumatic and Servo-
electromechanical systems.
See page 71
61
ADVANCED DYNAMIC TESTING
IPC Global’s range of Servo-Hydraulic and Servo-Pneumatic Universal Testing Machines (UTM) are flexible, accurate,
reliable and affordable. IPC Global has the largest customer user-base of servo-controlled UTM systems in the as-
phalt and pavement materials testing industry.
62
63
ADVANCED DYNAMIC TESTING
main features
>> Robust, high-strength and compact 2-column load frame
>> Precision engineered for high stiffness and alignment
>> Digital Servo-Pneumatic control
>> Easy and quick crosshead positioning
>> Fully customisable to suit a large range of testing applications
>> 2 axis control and 8 channel data acquisition as standard, upgradeable up
to 8 axes control and 32 channel acquisition
>> Available in two versions: Standard and with motorized crosshead for
quickly and easy test set-up
kN
16
64
Technical specifications Servo-pneumatic actuator assembly, with
ʰʰ High stiffness frame, 16 kN cap., High-performance servo-valve and built in
650 mm vertical space, LVDT (±15 mm) w/ In-Line Conditioner
339 mm space between columns. (ILC), loading frame, pneumatic reservoir
assembly, load cell (± 20 kN) w/ ILC.
ʰʰ Double effect servo-pneumatic ʰʰ 230V/50Hz/1ph
actuator, 30 mm stroke
ʰʰ 220V/60Hz/1ph
ʰʰ Actuator with 30 mm built-in
displa- cement transducer ʰʰ 110V/60Hz/1ph
ʰʰ Load cell ± 20 kN cap. Max. frequency
30 Hz -Dimensions (WxDxH): 79-PV70A12
480 x 300 x 1200 mm IPC Global UTM-16P, Servo-pneumatic
ʰʰ Weight approx.: 200 kg universal testing system 16 kN capacity,
complete with motorized crosshead.
Including Dual Axis Control & Data Acqui- Motorized cross-head position controls, PC operated or by simple pressing the incorporated buttons.
Ordering information sition System IMACS, 16kN
Servo-pneumatic actuator assembly, with
79-PV70A02 High-performance servo-valve and built in
IPC Global UTM-16P, Servo-pneumatic LVDT (±15 mm) w/ In-Line Conditioner
universal testing system 16 kN capacity, (ILC), loading frame, pneumatic reservoir
including Dual Axis Control & Data assembly, load cell (± 20 kN) w/ ILC.
Acquisition System IMACS, 16kN 230V/50-60Hz/1ph
79-PV70A14
Same as above but 110V/60Hz/1ph
Digital Controller
and Data Acquisition System
Environmental chamber Ordering information
The Integrated Multi-Axis Control System provides the user with leading-
edge performance, unparalleled levels of control and the ultimate in IPC Global research specification 79-PV70E02
flexible data acquisition for servo testing machines. environmental chambers have Environmental chamber for servo-pneu-
For more information see page 71. been designed specifically to fully matic testing machine, -25°C to +60°C,
conform with ALL the main ASTM, 110-230V/50-60Hz/1Ph
AASHTO, EN and AS reference This unit is required to perform all type
Standards for determining the of tests (not required for AASHTO TP 124).
mechanical performance of as-
software phalt mixtures. Temperature measurement kit
To monitor the test temperature inside the
UTS Software has numerous chamber
purpose-written applica-
tions to make it easy for 79-PV70116
testing asphalt, unbound Temperature measurement kit
granular and other construc- (-50°C to + 100°C) including two probes
tion material to interna-
tional Standards. Testing modules
For more information see (Test accessories)
See page 76
page 72.
65
ADVANCED DYNAMIC TESTING
30
Servo-Hydraulic Testing Machines
main features
>> Rigid two column load frame
>> Precision engineered for high stiffness and alignment
>> Standard tie-rod sealed actuator
>> Available with double acting, through-rod high precision labyrinth bearing
actuator providing superior performance.
>> High performance servo valve allows sinusoidal loading frequencies
up to 70 Hz
>> Motorized crosshead positioning
>> Hydraulic crosshead clamping
>> Fully customizable to suit a large range of testing applications
>> Quick and easy adjustment of the test space without the need for
extension rods
>> Modular design for easy support and upgrade
>> Provides improved alignment regarding concentricity and axiality
>> Supplied complete with high quality pre-filtered oil for longer life
Models available
kN The UTM-30 is available in two versions:
30
- Standard (Model 79-PV70B02) with tie-rod actuator
- High performance, fitted with Servo-Hydraulic Labirynth
bearing actuator* (Model 79-PV70B12)
66
Advanced Standard
Models 79-PV70B12 79-PV70B02
79-PV70B14 79-PV70B04
+/- 30 kN Dynamic +/- 25 kN Dynamic
Load Capacity: +/- 30 kN Static +/- 30 kN Static
Frequency: Up to 70 Hz Up to 70 Hz
Low profile, Low profile,
Load cell: Pancake type Pancake type
Actuator type Labyrinth Bearing sealless Tie-rod sealed
(double acting)
Ordering information Stroke 50 mm (+/- 25 mm) 50 mm (+/- 25 mm)
High performance model
Inbuilt displacement transducer 50 mm 50 mm
79-PV70B12
IPC Global UTM-30, Servo-hydraulic Adjustable crosshead Motorized Motorized
Universal Testing Machine 30 kN cap., Crosshead clamping Hydraulic Hydraulic
including Dual Axis Control & Data Acquisi-
tion System IMACS,30kN Servo-hydraulic Maximum vertical daylight 795 mm 795 mm
labyrinth bearing actuator, with high-
performance servo-valve and built-in LVDT Space between columns 450 mm 450 mm
(+/-50mm) with/ In-Line Conditioner Max. working pressure 210 bar 210 bar
(ILC), load frame with motorized crosshead
positioning & hydraulic crosshead clamp- HYDRAULIC POWER PACK
ing, hydraulic power supply, load cell
(+/-30kN) with/ ILC. 230V/50-60Hz/1ph Low pressure adjustable 50 to 210 bar 50 to 210 bar
The upper loading motion with very little
Max flow rate 5 l/min 5 l/min inertia, provide very accurate testing, easy
Standard model to perform, even with accessories of large
All dynamic and static tests conforming Mains power 2.2 kW 2.2 kW dimensions as the triaxial cells.
to international Standards, can also be Cooling system Air cooling Air cooling
performed with the following models.
Oil tank cap. -Complete with
79-PV70B02 pre-filtered oil 45 l 45 l
IPC Global UTM-30, Servo-hydraulic
Universal Testing Machine 30 kN cap., DIMENSIONS AND WEIGHTS
including Dual Axis Control & Data
Acquisition System IMACS, 30kN Servo- Frame (hxwxd) mm 1900x680x600 1980x680x600
hydraulic actuator, with high-performance Hydraulic power pack (hxwxd)
servo-valve and built-in LVDT (+/-50mm) 1000x470x765 1000x470x765
mm
with/ In-Line Conditioner (ILC), load frame
with motorized crosshead positioning & Approximate total weight 195 kg 195 kg
hydraulic crosshead clamping, hydraulic
power supply, load cell (+/-30kN) w/ ILC. Environmental chambers
230V/50-60Hz/1ph
IPC Global’s environmental chambers
Accessories use a high quality mechanical
Testing modules refrigeration system to enable users
(see page 76) to analyze materials’ properties at
Note. The various testing modules includes real-life working temperatures for
the relevant testing software. extended periods.
Two version available:
79-PV70E12
working temperatures from -25 to
+70°C, for UTM-30
79-PV70E22
working temperatures from -50 to
+80°C, for UTM-30
67
ADVANCED DYNAMIC TESTING
kN
130
Ordering information
79-PV70C05 79-PV70C15
IPC Global UTM-130, Servo-hydraulic IPC Global UTM-130XL, Servo-hydraulic The UTM-130XL has been designed and engineered specifically
Universal Testing Machine 130 kN cap., Universal Testing Machine 130 kN cap., to accommodate the Extra Large Four Point Bend Jig and Extra Large
including Dual Axis Control & Data Acquisi- Extra Large version, including Dual UTM 130 Environmental chamber.
tion System IMACS, 130kN Servo-hydraulic Axis Control & Data Acquisition System Based on our world renowned UTM-130, the UTM-130XL allows you to
actuator, with high-performance servo- IMACS, 130kN Servo-hydraulic actuator, perform the four point bend test on asphalt specimens, up to 160X200 mm
valve and built-in LVDT (+/-50mm) with/ with high-performance servo-valve and (hxw) and a minimum length of 790 mm, at non-ambient temperatures.
In-Line Conditioner (ILC), load frame built-in LVDT (+/-50mm) with/ In-Line UTM-130XL delivers superior reliability and accuracy with proficient
with/ hydraulic crosshead positioning & Conditioner (ILC), load frame with/ performance of tension, compression and dynamic loading analysis on all
clamping, hydraulic power supply, load hydraulic crosshead positioning & clamp- types of materials.
cell with/ ILC.. 380V, 50Hz, 3ph ing, hydraulic power supply, load cell with/ This unique testing system can be used with our full range of test accessories.
ILC.. 480V, 50Hz, 3ph
79-PV70C06
Same as above but 220 V, 60 Hz, 3 ph. 79-PV70C16
Same as above but 220 V, 60 Hz, 3 ph.
68
main features
>> Rigid two column load frame
Environmental chambers
>> Precision engineered for high stiffness and alignment
IPC Global’s environmental cham-
>> Double acting high precision actuator
bers use a high quality mechani-
>> High performance servo valve allows sinusoidal loading frequencies cal refrigeration to enable users
up to 70 Hz to analyze materials’ properties at
>> Motorized crosshead positioning real-life working temperatures for
>> Hydraulic crosshead clamping extended periods.
>> Fully customizable to suit a large range of testing applications Different versions available:
>> Independent environmental chamber eliminating the transfer of 79-PV70E32
mechanical vibrations to testing machine working temperatures from -50 to
>> Extra large version UTM-130XL available designed to accommodate the +100°C, for UTM-130
Extra Large Four Point Bend Jig 79-PV70E42
>> Supplied complete with high quality pre-filtered oil for longer life working temperatures from -25 to +60°C,
for UTM-130
79-PV70C05 / 79-PV70C06 / 79-PV70E52
Models
79-PV70C15 / 79-PV70C16 Extra large version, working temperatures
F R A M E from -50 to +100°C, for UTM-130XL
For detailed information see page 70.
+/- 100 kN dynamic
Load capacity
+/- 130 kN static
Frequency Up to 70 Hz
Tie rod sealed / Optional labyrinth
Actuator type
bearing
Stroke 100 mm (+/- 50 mm)
Inbuilt displacement transducer 100 mm
Adjustable cross-head Hydraulic
Crosshead clamping Hydraulic
Maximum vertical daylight 1015 mm
600 mm (Models 79-PV70C05, C06)
Space between columns
770 mm (Models 79-PV70C15, C16)
H Y D R AU L I C P O W E R PAC K
Environmental Chambers
for UTM Servo-Hydraulic Testing Machines
main features
>> Closed-loop PID temperature controller
>> Four access ports (models for UTM-130), two access ports
(models for UTM-30)
>> Stainless steel AISI 304, 18/10 heavy duty construction
>> Triple glazed, argon filled, Lo glass door
>> Defrost system and interior lighting
>> Fan forced ventilation
>> Ergonomic design provides easy access to chamber
IPC Global’s environmental cham- 79-PV70E32 79-PV70E42 79-PV70E52 79-PV70E12 79-PV70E22 79-PV70E02
bers use a high quality mechani- Models Extended Standard Extended Standard Extended Standard
cal refrigeration system and su- range range range
perior insulation technologies to
enable users to analyze materi-
als’ properties at real-life working
temperatures.
70
Digital Controller and Data Acquisition System
Temperature main features
Measurement Kit
>> Low data noise performance
79-PV70116 with over-sampled data
Temperature measurement kit consists of >> Excellent waveform fidelity from the
two temperature transducers with an integrated acquisition
asphalt specimen and control functions
>> Flash based firmware allows onsite
updates of all modules
>> Total confidence in measurements
from analogue inputs that
auto-calibrate on power-up
>> Acquisition and control
IMACS for Servo-pneumatic test equipment Up to 8 axis of control and up to
32 channels of data-acquisition
IMACS for Servo-Hydraulic >> Real-time digital computer control
and Servo-Electromechanical test equipment with 32bit processing
>> Exceptional data resolution &
control with up to 20 bit effective
auto-ranging data acquisition
71
ADVANCED DYNAMIC TESTING
software
IPC Global’s powerful and professional UTS Software draws upon over
30 years of advanced materials testing experience.
IPC Global’s test and control software is known for its simplicity in
use, clarity of results and analytical power. UTS Software is developed
from expert knowledge of applications to run automated test routines
and therefore speeds up testing. UTS Software is written in powerful,
professional Delphi.
IPC Global’s UTS Software features real-time graphs for monitoring the
specimen under test; portable binary data files for sharing, reviewing
and analysis; and ‘live’ transducer levels display.
The purpose-built UTS applications have dialogue help boxes for
automated test routines and easy-to-read graphic screens for test
set-up and reviewing.
72
software
The ultimate in clean accurate data All test data saved in portable binary files
IMACS integrated control and data acquisition with 4x oversampling technology, auto-ranging A powerful feature unique to UTS software. When the test is finished UTS saves in a
and effective 20-bit data resolution gives unparalleled control and waveform fidelity. binary file not only the data points but also all the test setup and calibration parameters.
This means that at any time in the future the test can be reviewed as if it has just been
performed complete with all test control, PID, specimen settings and results.
page
AASHTO Standards
AASHTO T307 Resilient Modulus of Soils and Aggregate Materials.............................................................................................. 77
AASHTO T321 Fatigue Life of Compacted Hot-Mix Asphalt (HMA) subjected to Repeated Flexural Bending... 81,97, 98
AASHTO T322 Creep Compliance and Strength of Hot-Mix Asphalt (HMA) using
the Indirect Tensile Test Device............................................................................................................................................ 78, 96
AASHTO T342 Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures................................................................................ 77, 99
AASHTO TP10 Thermal Stress Restrained Specimen Tensile Strength (TSRST)...................................................................... 80, 100
AASHTO TP31 Resilient Modulus of Bituminous Mixtures by Indirect Tension...................................................................... 78, 96
AASHTO TP79 Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) using
the Asphalt Mixture Performance Tester (AMPT)..................................................................................................... 77, 79, 89, 97
AASHTO TP105 Fracture Energy of Asphalt Mixtures using the Semicircular Bend Geometry (SCB).......................... 76
AASHTO TP107 Test method for determining the damage characteristic
of Asphalt Mixtures from Direct Tension (SVECD Simplified Viscoelastic Continuum
Damage Model - Uniaxial Fatigue).................................................................................................................................... 80, 83
AASHTO TP116 Standard Method of Tests for Rutting Resistance of Asphalt Mixtures using
Incremental Load Permanent Deformation (iRLPD)............................................................................................... 83
AASHTO TP124 Fracture Potential of Asphalt Mixtures Using the SCB Flexibility Index Test (FIT)................................. 76, 90
AS and other
AG:PT/T233 Fatigue Life of Compacted Bituminous Mixes subject to Repeated Flexural Bending.......................... 81, 97
AG:PT/T274 Characterisation of Flexural Stiffness and Fatigue Performance of Bituminous Mixes.......................... 81, 97
AS 03:2000 Fatigue Life of Compacted Bituminous Mixes subject to Repeated Flexural Bending.......................... 81, 97, 98
AS 2891.12 Permanent Compressive Strain Characteristics of Asphalt - Dynamic Creep Test.................................... 97
AS 2891.13.1 Resilient Modulus of Asphalt—Indirect Tensile Method.......................................................................................... 78, 96
TEX-248-F Overlay Test........................................................................................................................................................................................... 79, 90
ASTM Standards
ASTM D4123 Indirect Tension Test for Resilient Modulus of Bituminous Mixtures.............................................................. 78, 96
ASTM D7313 Fracture Energy of Asphalt-Aggregate Mixtures using
the Disk-Shaped Compact Tension Geometry................................................................................................................ 78
ASTM D7369 Resilient Modulus of Bituminous Mixtures by Indirect Tension Test................................................................. 78, 90, 96
ASTM D7460 Fatigue Failure of Compacted Asphalt Concrete subjected
to Repeated Flexural Bending................................................................................................................................................... 81, 97
ASTM D8044 Test method for Evaluation of Asphalt Mixture Cracking Resistance using the SCB.............................. 76, 90
74
page
BS Standards
BS 598:11.1 Permanent Deformation of Bituminous Mixtures subject to Unconfined
Uniaxial Loading................................................................................................................................................................................. 79
BS DD213 Indirect Tensile Stiffness Modulus of Bituminous Mixtures ................................................................................... 78, 96
EN Standards
EN 12697-24A Resistance to Fatigue by Two-Point Bending Test on Trapezoidal Shaped Specimens......................... 81, 97
EN 12697-24D Resistance to Fatigue by Four-Point Bending Test on Prismatic Shaped Specimens ............................ 98
EN 12697-24E Resistance to Fatigue by Indirect Tensile Test on Cylindrical Shaped Specimens..................................... 78, 96
EN 12697-25A Uniaxial Cyclic Compression Test on Hot-Mix Asphalt............................................................................................... 79
EN 12697-25B Triaxial Cyclic Compression Test on Hot-Mix Asphalt................................................................................................. 77, 96
EN 12697-26A Stiffness by Two-Point Bending Test on Trapezoidal Shaped Specimens...................................................... 81, 97
EN 12697-26B Stiffness by Four-Point Bending Test on Prismatic Shaped Specimens........................................................... 98
EN 12697-26C Stiffness by Indirect Tension to Cylindrical Specimens.............................................................................................. 78, 96
EN 12697-26D Stiffness by Direct Tension-Compression Test on Cylindrical Specimens...................................................... 80, 97
EN 12697-26E Stiffness by Direct Tension on Cylindrical or Prismatic Specimens.................................................................... 80
EN 12697-44 Crack Propagation by Semi-Circular Bending test........................................................................................................ 76
EN 12697-46 Low Temperature Cracking and Properties by Uniaxial Tension Tests.............................................................. 80, 100
NCHRP Standards
NCHRP 1-28A Resilient modulus for Flexible Pavement Design ......................................................................................................... 78, 90, 96
NCHRP 9-19/9-29 Dynamic modulus, Flow Time and Flow Number of Hot Mix Asphalt............................................................. 77, 79, 89, 97
The recommendations are our interpretation on the equipment required to satisfactorily undertake the test. However, each Laboratory Manager may have their own preference because
the selection of the most appropriate test machine is material, temperature and frequency dependent.
75
ADVANCED DYNAMIC TESTING
Accessories
Testing accessories, related Standards and application on the various UTM’s Testing Systems
Specific accessories to perform a test are described below. The accessory must be supported with various additional items
(e.g. environmental chambers, transducers, mounting kit, consumables, etc.) to create a complete testing module. For
full information, request our Buyer’s Guide. Each testing module includes the relevant UTS Software.
Semi-Circular Bend
Accessory Standard For use with
79-PV70136
Semi-Circular Bend (SCB) Jig for AASHTO TP105
AASHTO TP105 Energy of Asphalt Mixtures Using the Semi- UTM-30
ʰʰ Constructed using high quality materials Circular Bend Geometry (SCB)
for long life and test accuracy
79-PV70139
Semi-Circular Bend (SCB) Jig for AASHTO TP124 UTM-16P
AASHTO TP124 Determining the Fracture potential of UTM-30
ʰʰ Easily extends the capability of your UTM Asphalt Mixtures Using the Flexibility Index UTM-130
System Test (FIT) Determining the Fracture
76
Accessories
EN 12697-25B UTM-16P
Triaxial Cyclic Compression UTM-30
Test on hot mix asphalt UTM-130
Proving ring
AASHTOO TP79
79-PV70502
UTM-16P
Multi-Purpose Dynamic Modulus and Uniaxial AASHTO T342/TP 62 UTM-30
Fatigue Proving Ring UTM-130
AASHTO TP 107/SVECD
77
ADVANCED DYNAMIC TESTING
Accessories
Indirect Tensile
Accessory Standard For use with
AASHTO TP31 UTM-16P*
Resilient Modulus of Bituminous Mixtures UTM-30
by Indirect Tension UTM-130
AS 2891.13.1 UTM-16P
Stiffness by Indirect Tension to Cylindrical UTM-30
Specimens UTM-130
Other transducer
configurations EN 12697-24E UTM-16P
Resistance to Fatigue by Indirect Tensile Test UTM-30
on Cylindrical Specimens UTM-130
79-PV70602
Disk-Shaped Compact Tension Jig
ʰʰ Precision engineered using zinc plated ASTM D7313
steel for light weight and anti-corrosion UTM-16P*
properties Fracture Energy of Asphalt-Aggregate UTM-30
ʰʰ D esigned for easy, one person test set-up Mixtures using the Disk-Shaped Compact UTM-130
Tension Geometry
ʰʰ Purposely designed for 150mm disk
shaped specimens
ʰʰ Easily interchangeable specimens
78
Accessories
Overlay Test
Accessory Standard For use with
79-PV70680
Overlay Test Jig
ʰʰ Advanced design for high stiffness and
extremely low compliance Tex-248-F / ASTM WK26816
ʰʰ High precision linear guides to ensure UTM-16P
perfect axial loading alignment and no Determining the Susceptibility of Asphalt UTM-30
lateral rotation Mixtures to Cracking using the Overlay UTM-130
Tester
ʰʰ Available with on-jig and on-specimen
transducers
ʰʰ Specimen preparation kit allows for quick
and easy gluing and set up
Dynamic Modulus
AASHTO T342/TP62
UTM-30
Determining Dynamic Modulus of Hot-Mix UTM-130
79-PV70521 Asphalt Concrete Mixtures
AASHTO T342/TP62 Guided axial LVDT mount-
ing hardware
79-PV70503
AASHTO TP79 Gauge Clamp Assembly AASHTO TP79 (NCHRP 9-29)
ʰʰ Property to create master curves for UTM-30
Determining the Dynamic Modulus and UTM-130
structural design Flow Number for Hot Mix Asphalt
79
ADVANCED DYNAMIC TESTING
Accessories
EN 12697-26E
UTM-16P*
Test applying direct tension to cylindri- UTM-30
cal specimens (DT-CY) or to prismatic UTM-130
specimens (DT-PR)
AASHTO TP10
UTM-30
Thermal Stress Restrained Specimen Tensile UTM-130
Strength (TSRST)
79-PV70640
TSRST kit
ʰʰ Self-aligning couplings for true axial align-
ment
ʰʰ Specimen Platens 150mm dia, 50mm thick EN 12697-46
UTM-30
ʰʰ Invar Rods provide low thermal contraction Low Temperature Cracking and Properties UTM-130
for accurate displacement measurement by Uniaxial Tension Tests
over the full temperature gradient
ʰʰ Optional Specimen Alignment Stand
ʰʰ Threaded rods to safely support specimen
and fixture after fracture
ASTM WK53824
Uniaxial Thermal Strain and Stress Test UTM-130
(UTSST)
80
Accessories
EN 12697-24A
79-PV70200 UTM-16P*
Resistance to Fatigue by Two-Point Bending UTM-30
Trapezoidal Two Point Bend Jig for UTM Systems Test on Trapezoidal Shaped Specimens
ʰʰ Engineered from high strength aluminum
for high stiffness and light weight perfor-
mance
ʰʰ On-specimen precision LVDT displacement
transducer for strain measurements
ʰʰ Comes standard with precision +/-2.5kN EN 12697-26A
UTM-16P*
load cell for improved clarity and accuracy Stiffness by Two-Point Bending Test on UTM-30
in your results Trapezoidal Shaped Specimens
79-PV70420 EN 12697-24D
Extra Large Four Point Bend Jig Resistance to Fatigue by Four-Point Bending UTM-130XL
ʰʰ Suitable for asphalt specimens up to Test on Prismatic Shaped Specimens
160x200mm (HxW) and with a minimum
length of 790mm
ʰʰ Specimen rollers with pneumatic lift and
lowering for easy loading of specimen EN 12697-26D
ʰʰ Automated self-aligning specimen yokes Stiffness by Four-Point Bending Test on UTM-130XL
for easy specimen insertion prismatic Shaped Specimens
AMPT Pro and DynaQube have been developed to perform Dynamic SuperPave Performance tests with ease, including the three
asphalt tests of NCHRP Projects 9-19 and 9-29 – Dynamic Modulus, Flow Number and Flow Time. The AMPT PRO has been de-
signed with the latest technologies and product developments to ensure that it out performs any other product on the market.
DynaQube is a Quality Control Testing System utilizing IPC Global’s unique and innovative EmS technology. This radical new
approach democratises SuperPave mix performance tests that were previously only available to high-end research laboratories.
82
Standards for both models
Lower Temperatures
All-in-One Computer Control
Significantly improved ECU AMPT Pro is ready to work straight out
performance and innovative cell of the box with the latest All-in-One
design allow the AMPT Pro to touchscreen PC technology at your
rapidly reach sub zero temperatures finger tips (optional).
previously not possible.
Easy and Versatile
AMPT PRO features interchangeable Clarity in Results
transducers and load cells with Controlling AMPT Pro is IPC Global’s Integrated
“plug and play” signal conditioners Multi-Axis Control System (IMACS). The
allowing for quick and easy tried and tested IMACS delivers leading edge
transition of test set-ups performance, unparalleled control and the
ultimate in flexible data acquisition.
High Performance
At the heart of the AMPT
Pro is an all new Hydraulic Rapid Cooling
Power Supply utilising inverter Experience increased productivity
technology coupled with a high with AMPT Pro’s rapid cooling
performance labyrinth bearing functionality. AMPT Pro can cool
actuator to deliver 19kN of force, from an ambient temperature of
greater reliability and longer +23°C down to +4°C in under 30
service life. minutes and reaches temperatures
down to -5°C
Fully Integrated
(Optional Air Compressor)
Fully integrated and compact
in design the AMPT Pro is the Testing Efficiency
perfect solution for both static AMPT Pro has been designed as an
and mobile testing facilities. easy-to-use and ergonomic testing
An optional integrated air system that greatly increases the
compressor eliminates the need efficiency of asphalt testing.
for an external air compressor
with the whole system only
requiring power to operate.
84
IPC Global, the researcher’s choice for Advanced Asphalt Testing equip-
ment has again set the benchmark for innovation and performance with
the new AMPT Pro. AMPT Pro has been designed with the latest tech-
nologies and product developments to ensure that it surpasses any other
product on the market. AMPT Pro fully complies with AASHTO TP 79 and
can perform the three asphalt tests of NCHRP Projects 9-19 and 9-29 – Dy-
namic Modulus, Flow Number and Flow Time with ease. In addition AMPT
Pro can also perform Uniaxial Fatigue/SVECD, Overlay Test, Semi-Circular
Easily interchangeable
Bend, Indirect Tensile Dynamic Modulus, iRLPD andSmall Diameter Dy- pluggable transducers
namic Modulus and SVECD tests with the addition of optional hardware
accessories.
85
ADVANCED DYNAMIC TESTING
Rapid Cooling
Automatic dual fan speed control
provides increased performance for both All-in-One Computer Control
cooling and heating. DynaQube is ready to work straight out of the
At the press of a button DynaQube can box with the latest All-in-One touchscreen PC
switch into Boost mode increasing the technology at your finger tips (optional).
rate of cooling and heating.
Clarity in Results
Easy and Versatile Controlling DynaQube is IPC Global’s
DynaQube features interchangeable Integrated Multi-Axis Control System
transducers and load cells with (IMACS). The tried and tested IMACS
“plug and play” signal conditioners coupled with UTS application software
allowing for quick and easy transition delivers leading edge performance,
of test set-ups. unparalleled control and the ultimate in
flexible data acquisition.
Fully Integrated
Fully integrated and compact in design
the DynaQube is the perfect solution for
both static and mobile testing facilities. Testing Efficiency
An optional integrated air compressor DynaQube has been designed as an easy-
eliminates the need for an external air to-use and ergonomic testing system
supply. The super-silent compressor is oil that greatly increases the efficiency of
free and comes equipped with in-built asphalt testing.
multi-phase filtration to protect your
investment.
86
IPC Global has increased the range of Asphalt Mixture Performance Test-
ers with the new DynaQube, based on the revolutionary EmS electrome-
chanical servoactuation technology, suitable for QC/QA tests. DynaQube
grants a level of testing accuracy, quality, performance and range nor-
mally only achievable you could get from complex and expensive ma-
chines only.
87
ADVANCED DYNAMIC TESTING
Standard outfit
AMPT Pro includes, as standard, the following testing Modules (compression platens) which, must be sup-
ported with Transducer kits as specified below.
Transducer and mounting kit Note 79-PV71002 AMPT Pro Uniaxial Fatigue
for the above Testing Modules The beside items are needed to complete small diameter specimen kit
the Test Modules supplied with the machine AMPT Pro – Air Compressor assembly, Max
Including: air flow 137 l/min, 8 Bar cap,. 5 litres tank, (50 mm dia.)
(Standard outfit). Loose -Core and Epsilon
79-PV71010 transducers are available as alternative on with air dryer with molecular sever. 220 V, 79-PV70617
request. 60 HZ, 1 ph.
AMPT Pro On-Specimen LVDT Assembly – Uniaxial Fatigue Glue Jig – 50 mm Speci-
IPC guided Spring Core Black. Includes ILC 79-PV70507 men Retro-fit Kit
Pod and LVDT Target Clamps x2 Machine accessories (Optional) AMPT consumable kit 79-PV70618
79-PV71011 79-PV71000 AMPT 50 mm Specimen Platen
AMPT Pro On-Specimen LVDT Assembly – AMPT Pro -All-in-One Touch Screen PC 79-PV71213
AMPT Pro Dynamic Modulus E*
IPC guided Spring Core Blue. Includes ILC Assembly small diameter specimen kit AMPT LVDT Gauge Point Fixing Jig 50 mm
Pod and LVDT Target Clamps x2
79-PV70502 (38 & 50 mm dia.) Specimen Upgrade Kit
79-PV71012 Proving Ring Assembly TP79/T342/TP62/ 79-PV71210 79-PV70619
AMPT Pro On-Specimen LVDT Assembly – TP107 SVECD/AMPT. Includes:
IPC guided Spring Core Green. Includes ILC AMPT 38 mm Specimen Platen Kit (top 6 AMPT SVECD – Top & Bottom Spacer
-6x AMPT Proving Ring HEX gauge points Kit, for testing 50 mm diameter
Pod and LVDT Target Clamps x2 -6x Socket Head Cap Screw M2.5 x 16 SS bottom platens set)
x 110 mm specimens
79-PV70524 gauge Screws 79-PV71211
AMPT Pro Gauge Point Fixing Jig Assembly 79-PV71001 AMPT 50 mm Specimen Platen Kit (top 6
-NO gauge point Heads. Includes mem- AMPT Pro – Air Compressor assembly, bottom platens set)
brane stretcher Max air flow 137 l/min, 8 Bar cap,. 5 litres 79-PV71212
79-PV71031 tank, with air dryer with molecular sever. AMPT LVDT Gauge Point Fixing Jig 38 mm
AMPT Pro Gauge Point Fixing Jig – Setting With port fpr gauge point fixing jig. 220 V, Specimen Upgrade Kit
Head Kit Hex – set of 3 50 HZ, 1 ph.
79-PV71213
79-PV70507 AMPT LVDT Gauge Point Fixing Jig 50 mm
AMPT consumable kit Specimen Upgrade Kit
88
*
Accessories
Here below is described only the specific accessory to perform a test. The accessory must be supported with various ad- *The standard outfit of these testers
ditional items (e.g. transducers, mounting kit, consumables, etc.) to create a complete testing module. includes the accessories to perform Dynamic
For full information request our Buyer’s Guide. Each testing module includes the relevant UTS Software. Modulus E* (AASHTO TP79-NCHRP 9-29),
Flow Number (NCHRP 9-29-AASHTO TPXX) and
Flow Time (NCHRP 9-29) excluding LVDTs, etc
79-PV71210
79-PV71211
AASHTO TP79 (NCHRP 9-29)
38 & 50mm specimen Platens kit
The Small Diameter Specimen Dynamic Modulus Kit allows Determining the Dynamic Modulus and
researchers to perform dynamic modulus tests on 38mm & 50mm Flow Number for Hot Mix Asphalt Using the
diameter specimens. Small diameter specimens are more easily ob- Asphalt Mixture Performance Tester (AMPT)
tainable from cores and allow dynamic modulus and flow number
tests to be conducted for forensic analysis
79-PV70610
Tension kit AASHTO TP107 / S-VECD
The Uniaxial Fatigue Kit allows to perform tension tests (plus Determining the Damage Characteristic
through zero push-pull fatigue), including Dr. Richard Kim’s Simpli- Curve of Asphalt Mixtures from Direct Ten-
fied Viscoelastic Continuum Damage test (S-VECD) AASHTO TP 107 sion Cyclic Fatigue Test
and the Simplified Continuum Damage Uniaxial Fatigue (SCDUF)
test.
79-PV70619
38, 50 and 75 mm dia. Tension kit AASHTO TP107 / S-VECD
The Small Diameter Specimen Uniaxial Fatigue Kit allows researchers Determining the Damage Characteristic
to perform S-VECD tests on 38, 50 and 75 0mm diameter speci- Curve of Asphalt Mixtures from Direct Ten-
mens. Small diameter specimens are more easily obtainable from sion Cyclic Fatigue Test
cores and allow uniaxial fatigue tests to be conducted for forensic
analysis
89
ADVANCED DYNAMIC TESTING
*
Accessories
79-PV70131
Semi-Circular Bend (SCB) Jig Base ASTM D8044
for ASTM Standards Evaluation of Asphalt Mixture Cracking
Specifically designed to determine the critical Resistance using the Semi-Circular Bend
strain energy of asphalt specimens to compare the Test (SCB) at Intermediate Temperatures
fracture properties of asphalt mixtures with differ-
ent binder types AASHTO TP124
Determining the Fracture potential of
79-PV70139 Asphalt Mixtures Using the Flexibility Index
Semi-Circular (SCB) Bend Jig Test (FIT) Determining the Fracture
for AASHTO TP124
79-PV71400
Indirect tensile test jig
The Multi-Indirect Tensile Kit is specifically designed for analysis of Determining the Resilient Modulus of
Modulus of bituminous mixtures by repeated load indirect tensile Bituminous Mixtures by Indirect Tension
testing. The modulus tests are used to characterise asphalt mixtures
for performance based road pavement design.
Overlay Test
Accessory Standard
79-PV70680
Overlay test jig Tex-248-F / ASTM WK26816
The advanced design provides high stiffness and extremely low Determining the Susceptibility of Asphalt
compliance. This kit enables to conduct the Overlay Test for fatigue Mixtures to Cracking using the OverlayTester
cracking which can be incorporated into Mechanistic-Empirical
design system for flexible pavements
90
*
Accessories
79-PV70524
Gauge point fixing jig with “built-in” vacuum
generator and membrane stretcher
Specimen preparation
Accessory Standard
79-PV70611
Tension platen fixing jig
Proving ring
AASHTOO TP79
79-PV70502
UTM-16P
Multi-Purpose Dynamic Modulus and Uniaxial AASHTO T342/TP 62 UTM-30
Fatigue Proving Ring UTM-130
AASHTO TP 107/SVECD
91
ADVANCED DYNAMIC TESTING
AsphaltQube is a fully integrated asphalt standards testing system based Key Features and Benefits: Enhanced environmental cabinet
on the revolutionary EmS Electromechanical Servoactuation technology, The new environmental cabinet, based on
Brand New Technology new ECU Peltier technology, grants a wide
suitable for QC/QA tests. AsphaltQube includes a range of new temperature range with fast and accurate
Now you can perform all the most common asphalt test standards in one technologies, including the revolution- temperature control. Thes stainless steel
compact, modular, easy to use machine. ary Electromechanical Servoactuation construction with double glazed door/
delivering 15kN of force with low noise windows on three sides allows excellent
level, avoiding the need of HPS to operate visibility for observing specimens under
The flexible system allows you to perform all the test compatible with the machine, and thermo electric Peltier test. The two-side double door allows
DynaQube (Permanent deformation, cyclic compression, indirect tensile cooling technology. a complete 180° access to the test area
stiffness, indirect tensile fatigue, crack propagation, direct tension-com- when open.
Easy and Versatile
pression, dynamic/complex modulus) plus triaxial compression, four- The small footprint of the AsphaltQube All-in-One Computer Control
point and two-point stiffness and fatigue flexural tests belies the power and versatility of this fully AsphaltQube is ready to work straight
integrated modular system. The innovative out of the box with the latest All-in-One
modular design includes a 15kN capacity touchscreen PC technology at your finger
EmS actuator, granting long life and ac- tips (optional).
curate control of load and wave-shape, a
fully integrated reaction frame with triaxial
confining cell option. Testing Efficiency
AsphaltQube has been designed as an
Fully Integrated easy-to-use and ergonomic testing system
(Optional Air Compressor) that greatly increases the efficiency of
Fully integrated and very compact in asphalt testing.
design the AsphaltQube is the perfect
solution for both static and mobile testing Clarity in Results
facilities. An optional integrated air com- Controlling AsphaltQube is IPC Global’s
pressor eliminates the need for an external Integrated Multi-Axis Control System (IM-
air supply with the whole system only ACS). The tried and tested IMACS delivers
requiring power to operate. AsphaltQube leading edge performance, unparalleled
can be connected to an external air control and the ultimate in flexible data
compressor if available. acquisition.
92
System accessories
Standards Environmental chambers
79-PV72E12
AASHTO TP 79 AMPT IDT Plus
AsphaltQube/AST Environmental chamber,
Dynamic Modulus and Flow Number for Indirect Tensile Dynamic Modulus Test EN 12697-24A, 12697-26A 0° to + 60°C.
Hot Mix Asphalt Resistance to Fatigue and Stiffness 240 V, 50-60 Hz, 1 ph
ASTM D8044 (LSU SCB)
by Two-Point Bending Test 79-PV72E14
AASHTO TP 107 Cracking Resistance using Semi-circular
on Trapezoidal Shaped Specimens. Same as above but 110 V, 60 Hz, 1 ph
Damage Characteristic Curve from Direct Bend Test at Intermediate Temperatures
Tension Cyclic Fatigue Tests on Asphalt AASHTO T321, ASTM D74760,
ASTM WK 26816 Reaction frame
Mixtures (SVECD) EN 12697-24D, EN 12697-26B,
Cracking Using the Overlay Tester 79-PV72001
AS 03:2000, AG:PT/233,
AASHTO TP 116 AsphaltQube reaction frame kit
Tex 248-F AG:PT/T274
Rutting Resistance Using iRLPD
Overlay Test Reflective Cracking or Fatigue Stiffness and Resistance to Fatigue 79-PV71000
AASHTO TP 124 (Illinois SCB) by Four-Point Bending Test on All-in-One Touch Screen PC Assembly
Fracture Potential of Asphalt Mixtures SCDUF Prismatic Shaped specimens. 79-PV71001
Using the Flexibility Index Test (FIT) Simplified Continuum Damage Uniaxial
Fatigue EN 12697-25B Integrated compressor assembly, Max air
Triaxial Cyclic Compression on flow 137 l/min, 8 Bar cap,. 5 litres tank,
AASHTO T 342/TP 62
Hot Mix Asphalt with air dryer with molecular sever.
Dynamic Modulus of Hot-Mix Asphalt 220 V, 50 HZ, 1 ph
Concrete Mixtures (Limited temperature
and force range) Test accessories
See complete list and information on
page 96
Specifications Transducers
ʰʰ Load Capacity: ʰʰ Load Cell Low profile pancake type
Static 10kN / Dynamic 15kN ʰʰ Built-in Actuator LVDT 30mm Stroke
ʰʰ Actuator Stroke 30mm (+/-15mm TBC
stroke) ʰʰ Plug-and-Play Up to 8 channels TBC
ʰʰ Actuator Type Electromechanical
Servoactuation Services
ʰʰ Specimen Size 100 x 150mm (Dia. x ʰʰ Power (without air compressor)
H) nominally 50 x 135mm (Dia. x H) 220V–240V, 50Hz, single phase, 9A
38/50 x 110mm (Dia. x H) 208V, 60Hz, single phase, 11A
ʰʰ Temperature Range 0°C to +60°C* ʰʰ Power (with air compressor) 220V–
ʰʰ Cooling Rate 240V, 50Hz, single phase, 13A 208V,
ʰʰ Temperature Accuracy +/-0.5°C* 60Hz, single phase, 16A
*At temperature probe positioned close to the ʰʰ Air Clean dry air at 450-800kPa; 2 L/ Detail of the 79-PV72E12 environmental chamber.
specimen sec (Optional integrated air compres- The two side double door allow a complete 180° access to
ʰʰ Environmental cabinet dimensions sor available) the test area when open.
832 x 720 x 690mm (W x D x H)
ʰʰ Noise Level Less than 70db at 2m
ʰʰ Computer Control Integrated all-in- Ordering information
one touchscreen PC (optional)
79-PV72Q02
ʰʰ Air Compressor and Dryer Low noise,
integrated, automated operate-on- AsphaltQube, complete with
demand (optional) 15kN static / 10kN dynamic Electrome-
ʰʰ Dimensions 930 x 830 x 740mm chanical Servoactuation, 20kN load cell ,
(HxWxD) 30mm actuator LVDT and IMACS
- 208-230V/50-60Hz/1Ph.
ʰʰ Weight TBD
93
ADVANCED DYNAMIC TESTING
The AST Pro belies the power and versatility of this fully integrated modu- Easy and Versatile construction with double glazed door/
lar system. AST Pro is based on the tried and tested technology of IPC The small footprint of AST Pro belies the windows on three sides allows excellent
power and versatility of this fully inte- visibility for observing specimens under
Global’s world leading and renowned AMPT Pro and its high performance test. The two-side double door allows
grated modular system. AST Pro is based
servo-hydraulic labyrinth bearing actuator on the tried and tested technology of IPC a complete 180° access to the test area
Global’s world leading and renowned when open..
Now you can perform all the most common asphalt test standards in one AMPT Pro and its high performance servo-
hydraulic labyrinth bearing actuator and All-in-One Computer Control
high performance, compact, modular, easy to use machine. includes a fully integrated reaction frame AsphaltQube is ready to work straight
with triaxial confining cell option. out of the box with the latest All-in-One
AST Pro allows to perform a wide range of test, including the ones com- touchscreen PC technology at your finger
Fully Integrated (Optional Air tips (optional).
patible with AMPT Pro (Permanent deformation, cyclic compression, in- Compressor)
direct tensile stiffness, indirect tensile fatigue, crack propagation, direct Fully integrated and very compact in Testing Efficiency
tension-compression, dynamic/complex modulus) plus triaxial compres- design the AST Pro is the perfect solution AsphaltQube has been designed as an
for both static and mobile testing facilities. easy-to-use and ergonomic testing system
sion, four-point and two-point stiffness and fatigue flexural tests that greatly increases the efficiency of
An optional integrated air compressor
eliminates the need for an external air asphalt testing.
compressor with the whole system only
Key Features and Benefits: requiring power to operate. AST Pro can be Clarity in Results
connected to an external air compressor Controlling AST Pro is IPC Global’s Inte-
High Performance if available. AST Pro includes a Hydraulic grated Multi-Axis Control System (IMACS).
At the heart of the AST Pro is an all new Power Supply, fully integrated and with The tried and tested IMACS delivers
Hydraulic Power Supply utilising inverter air cooling. leading edge performance, unparalleled
technology coupled with a bottom loading control and the ultimate in flexible data
high performance labyrinth bearing Enhanced environmental cabinet acquisition.
actuator to deliver 19kN of force, with The new environmental cabinet, based on
long life, accurate control of loading and new ECU Peltier technology, grants a wide
wave-shape fidelity temperature range with fast and accurate
temperature control. The stainless steel
94
Transducers
Standards ʰʰ Load Cell Low profile pancake type
ʰʰ Built-in Actuator LVDT 30mm Stroke
AASHTO TP 79 AMPT Plus TBC
Dynamic Modulus and Flow Number for Indirect Tensile Dynamic Modulus Test EN 12697-24A, 12697-26A ʰʰ Plug-and-Play Up to 8 channels TBC
Hot Mix Asphalt Resistance to Fatigue and Stiffness
ASTM D8044 (LSU SCB)
by Two-Point Bending Test Services
AASHTO TP 107 Cracking Resistance using Semi-circular
on Trapezoidal Shaped Specimens. ʰʰ Power (without air compressor)
Damage Characteristic Curve from Direct Bend Test at Intermediate Temperatures
Tension Cyclic Fatigue Tests on Asphalt 220V–240V, 50Hz, single phase, 9A
AASHTO T321, ASTM D74760, 208V, 60Hz, single phase, 11A
Mixtures (SVECD) ASTM WK 26816
EN 12697-24D, EN 12697-26B, ʰʰ Power (with air compressor) 220V–
Cracking Using the Overlay Tester
AS 03:2000, AG:PT/233, 240V, 50Hz, single phase, 13A 208V,
AASHTO TP 116
Tex 248-F AG:PT/T274 60Hz, single phase, 16A
Rutting Resistance Using iRLPD
Overlay Test Reflective Cracking or Fatigue Stiffness and Resistance to Fatigue ʰʰ Air Clean dry air at 450-800kPa; 2 L/
AASHTO TP 124 (Illinois SCB) by Four-Point Bending Test on sec (Optional integrated air compres-
Fracture Potential of Asphalt Mixtures SCDUF Prismatic Shaped specimens. sor available)
Using the Flexibility Index Test (FIT) Simplified Continuum Damage Uniaxial ʰʰ Hydraulic Oil Pre-filled with high
Fatigue EN 12697-25B specification pre-filtered, ISO 46
AASHTO T 342/TP 62 Triaxial Cyclic Compression on Premium Mineral Oil
Dynamic Modulus of Hot-Mix Asphalt Hot Mix Asphalt
Concrete Mixtures (Limited temperature Ordering information
and force range)
79-PV72A12
AST Pro, modular servo hydraulic asphalt
tester, complete with 19kN static / 17kN
dynamic labyrinth actuator, 20kN load
cell, 30mm actuator LVDT and IMACS -
208-230V/50-60Hz/1Ph.
Test accessories
See complete list and information on
page 96
95
ADVANCED DYNAMIC TESTING
Accessories
Here below is described only the specific accessory to perform the test. The accessory must be supported with various ad-
ditional items (e.g. transducers, mounting kit, consumables, etc.) to create a complete testing module. For full information
request our Buyer’s Guide. Each testing module includes the relevant UTS Software.
The following first set of test accessories are in common with those proposed for the AMPT Pro and Dyna Qube Testers
and are illustrated at the pages specified between brackets
Overlay Test see page 90 Small diameter (38 & 50 mm) Dynamic Modulus E* see page 89
AASHTO TP31
Resilient Modulus of Bituminous Mixtures
by Indirect Tension
AS 2891.13.1
Stiffness by Indirect Tension to Cylindrical
Specimens
ASTM D4123
Indirect Tension Test for Resilient Modulus of
Bituminous Mixtures
79-PV70110 BS DD213
Indirect Tensile Jig Base and Platen assembly for 100 & Indirect Tensile Stiffness Modulus
150 mm dia. samples EN 12697-26C
ʰʰ Precision engineered Resilient Modulus of Asphalt-Indirect
ʰʰ Easy to set-up and use Tensile Method
ʰʰ Adaptable to 100mm and 150mm specimen sizes
ʰʰ Constructed using stainless and nitrite hardened steel AASHTO T322/TP9
Creep Compliance and Strength of Hot
Mix Asphalt using the Indirect Tensile Test
Device
ASTM D7369
Determining the Resilient Modulus of
Bituminous Mixtures by Indirect Tension
EN 12697-24E
Resistance to Fatigue by Indirect Tensile Test
on Cylindrical Specimens
Triaxial Test
Accessory Standard
79-PV72301
Triaxial cell for 100 mm tall specimens
ʰʰ High quality light weight acrylic cell wall for easy of place-
ment and excellent visibility EN 12697-25B
ʰʰ Top plate and base precision engineered of solid steel for high Triaxial cyclic compression
stiffness and exceptional alignment test on hot mix asphalt
ʰʰ Quickly and easily installed or removed •
ʰʰ Triaxial Cell includes ports for confining pressure, specimen
pressure release, on specimen transducers and temperature
96
Accessories
EN 12697-24A
79-PV72201
Resistance to Fatigue by Two-Point Bending
Trapezoidal Two Point Bend Jig
Test on Trapezoidal Shaped Specimens
ʰʰ Engineered from high strength aluminum for high stiffness
and light weight performance
EN 12697-26A
ʰʰ On-specimen precision LVDT displacement transducer for
strain measurements Stiffness by Two-Point Bending Test on
Trapezoidal Shaped Specimens
97
ADVANCED DYNAMIC TESTING
Environmental chamber
79-PV70E02
Environmental chamber for servo-pneu-
matic testing machine, -25°C to +60°C.
110-230 V, 50-60 Hz, 1 ph
Upgrade kit
79-PV70410
Fixed reference point retrofit upgrade kit.
99
ADVANCED DYNAMIC TESTING
Standards
Control and Data Acquisition
EN 12697-46 | AASHTO TP10-93
Controlling TSRSTplus is IPC Global’s Integrated Multi-Axis Control and
(TSRST-Thermal Stress Restrained Specimen Test, UTST-Uniaxial Tension Stress Test,
Data Acquisition System (IMACS). IMACS delivers leading edge perfor-
TCT-Tensile Creep Test and RT-Relaxation Test)
mance, unparalleled control and the ultimate in flexible data acquisi-
tion. For more information see page 488.
To perform:
>> Thermal Stress Restrained Specimen Test (TSRST)
Transducers
>> Uniaxial Tension Stress Test (UTST) Load Cells Pancake type, high performance, fatigue rated (1 per station)
>> Tensile Creep Test (TCT) Displacement Transducers Range: ± 0.5mm LVDTs, Resolution: <1μm,
>> Relaxation Test (RT) Accuracy: ± 0.1% full scale
Environmental Chamber
Mechanical Refrigeration Range: -40°C to +60°C*
Liquid Nitrogen Temperature Range: -50°C to +60°C
Temperature Ramp : -10°C per hour down to -30°C with mechanical
refrigeration, -10°C per hour down to -50°C with liquid nitrogen (LN2)
assistance
Temperature Stability : ± 0.5°C
*Minimum achievable temperature (without LN2) below
ambient is 60°C (i.e. for ambient of 20°C, minimum
achievable is -40°C)
100
World-Class Software
Application Powerful professional Delphi software
>> Save time analysing your materials using UTS software’s clear, precise,
rich, user friendly tab-based interface with multiple real time graphi-
cal displays. For more information see page 489
79-PV75001 79-PV70642
TSRST Temp transducers (± 60°C) w/ TSRST Gluing jig assembly
In-line conditioner (ILC) & shim
79-PV70643
79-PV70641 Additional TSRST platens
LVDT (± 0.5 mm) w/ In-line conditioner
(ILC) for AASHTO TP10
101
Bitumen testing apparatus
102
Fully Automatic Penetrometer Pressure Ageing Vessel
BBR
Rolling thin-film oven Bending Beam Rheometer
DSR
Dynamic Shear Rheometer
Rotational
Viscometers
103
BITUMEN TESTING APPARATUS
81-PV0103
Standards EN 1426 | EN13380-2 | ASTM D5 | ASTM D127 | AASHTO T49 | AFNOR T66-004 | DIN 52210 | IP 49 | JIS K 2207
A compact instrument, microprocessor controlled, using the latest technologies and programming tools. It Ordering information
includes a 6" lateral touch screen display, intuitive and easy to use, which shows the penetration/time curve
81-PV0103
and can display and average up to 6 tests.
Automatic Penetrometer,
The instrument reaches the test start point automatically and is supplied with an integrated led lamp. microprocessor controlled
The vertical movement is performed by a high precision stepper motor and measured by a contactless dis- ʰʰ Fully automatic test cycle includ-
placement transducer. The device also has the possibility to recall the vertical position for repeated tests. ing rapid approach and zero point
The test should be performed placing the penetration cup in thermostatically controlled water, using a suit- determination.
able device as the 81-B0102/D Digital circulation water bath with conditioning vessel. See accessories. ʰʰ Penetration range: 0-50 mm with
0.01 resolution, measured with con-
tactless displacement transducer.
Standard outfit Specifications ʰʰ Penetration measurement by contact-
less displacement transducer ʰʰ Intuitive and easy to use touch screen
The apparatus is supplied com- ʰʰ Integrated automatic approach and display (640 x 480 px).
plete with outfit for penetration positioning functions ʰʰ Possibility to display and average up
to 6 tests ʰʰ Real time display of penetration/time
of bituminous materials (needle, ʰʰ Intuitive and easy-to-use touch screen
ʰʰ Anodized base plate with spirit level curve.
needle holder, 50 g weight, 150 g display
ʰʰ Connections: USB port for test data- ʰʰ USB Port for test database and LAN
additional weight and 6 contain- ʰʰ Eight programmable reference posi-
tions for the holder assembly base and LAN port for PC connection port for PC connection.
ers), centering guide, anodized ʰʰ Supplied with USB flash drive and
ʰʰ High precision vertical movement by ʰʰ Adjustable leveling feet & led lamp
aluminium base plate with spirit included outfit for penetration of bituminous
stepper motor
level and adjustable leveling feet. ʰʰ Overall dimensions (wxdxh): materials: needle, needle holder, 50 g
ʰʰ Programmable penetration time
USB flash drive for saving data between 0 and 9999 sec 360x410x680 mm weight, 150 g additional weight and
and test reports included. ʰʰ Weight approx.: 21 kg 6 containers.
ʰʰ Programmable delay time between 0
and 999 sec ʰʰ 110-230V, 50-60 Hz, 1ph
ʰʰ Range: 0 to 50mm (penetration
500dmm)
ʰʰ Penetration resolution: 0.01mm
ʰʰ Possibility to recall the vertical posi-
tion for repeated tests
104
Software Accessories Sample cups
Penetrometer needles 81-B0110/A
81-B0113 Sample cup, dia. 55x35 mm. set of 6
PROFI LE
22/10/2015
16: 25
Penetrometer needle, 2.5 ± 0.05 g. fully pieces
hardened, tempered and polished stainless 81-B0110/B
NAME PIVOT steel. Conforming to ASTM D5 and EN Sample cup, dia. 70x45 mm. set of 6
1426. Supplied complete with conformity pieces.
BITUMEN 70/100 certificate
CUSTOMER CONTROLS 81-B0113/A
Penetrometer needles, 2.5 ± 0.05 g. fully
OPERATOR SMITH hardened, tempered and polished stainless
steel. Conforming to ASTM D5 and EN
NOTES NOT SO BAD 1426. Supplied complete with conformity
certificate. Set of 3 pieces
SAVE
81-B0113/1
Verified penetrometer needle 2.5 ± 0.5 Glass transfer dish
g. fully hardened, tempered and polished 81-B0109
stainless steel. Conforming to ASTM D5 and Glass transfer dish with support, 100 mm
Calibration of the contactless displacement transducer
EN 1426. Supplied complete with official dia. x 100 mm high.
UKAS Verification Certificate
22/10/2015
MANUAL COMMANDS 16: 35
CH1: 30250
CH1: 025.00
81-B0113, penetrometer needle 81-B0109
CH2: 00218
AUTOMATI C
22/10/2015
16: 32 82-B0122/4
EN thermometer, range from -8 to +32 °C,
0.1 °C graduation, type ASTM 63C.
105
BITUMEN TESTING APPARATUS
This advanced microprocessor controlled automatic tester is used to Firmware Ordering information
determine the softening point of bitumen using water or glycerol as ʰʰ Main menu:
81-PV0143
heating fluid. The softening point is taken by two suitably positioned ʰʰ Test on boiled distilled or deionized
water for softening point between 30 Automatic ring and ball apparatus.
light barriers and the temperature is measured by a PT100 sensor placed
and 80° C 230 V, 50-60 Hz, 1 ph.
in a centralposition. During operation a magnetic stirrer with adjustable
ʰʰ Test on glycerol for softening point 81-PV0143/Z
speed assures temperature uniformity in the vessel. The temperature As above but 110 V, 60 Hz, 1 ph.
gradient is strictly maintained throughout the test by the electronic sys- above 80 and up to 150° C
tem which conforms with the Standards. ʰʰ Test configuration set-up
Accessories
ʰʰ File management
ʰʰ Date and time 82-P0172/1
Safety features ʰʰ Operator name, test number, general RS232 cable
The hot plate is automatically notes
turned off at the end of the test. ʰʰ Language selection Spares
The apparatus is also fitted with ʰʰ Test parameters conforming to the 81-PV0145/1
an emergency stop button. The type of test: up to 80° C or above 80
test is automatically interrupted if up to 150° C, hot plate pre-heating Brass ring
the probe fails or is not correctly temperature thermocouple calibration 81-PV0145/2
positioned. The hot plate will not Specifications ʰʰ Magnetic stirrer speed adjustment Steel ball
be damaged or affected by acci- from 0 to 150 rpm
The apparatus comprises the following parts: 81-PV0145/3
dental leakages of water or glyc- ʰʰ Baud rate selection 38400 for PC and
ʰʰ Heater and magnetic stirrer with 9600 for printer Ball centering guide
erol, or if the beaker breaks. speed control 81-PV0143/1
ʰʰ Temperature probe Phisical specifications 600 ml beaker
ʰʰ Glass beaker, test rings and ball ʰʰ Power: 750 W
support ʰʰ Overall dimensions:
ʰʰ Application and centering device for 530 x 300 x 280 mm (w x d x h)
steel balls ʰʰ Weight: approx.16 kg
ʰʰ Light barrier system
ʰʰ Microprocessor system and large
graphic display with membrane
keyboard
ʰʰ RS232 port for PC or printer
106
Determination of ductility
The ductility test is performed for determining the ductility of bituminous materials by measuring the elongation
before breaking when two ends of briquette specimens are pulled apart at a specified speed and temperature.
81-PV10A02 Standard version complies and exceeds the ASTM D113, D6084, AASHTO T51 and EN 13398
Standards which require the test to be performed in water at a temperature of 25° ± 0.5°C
(ASTM/AASHTO) or 25° ± 0.2°C (EN) at a constant speed of 50 mm/min.
81-PV10B02 High performance version also satisfy EN 13589 and EN 13703 which require the test to be per-
formed from 4° to 30°C ± 0.2°C at a testing speed adjustable up to 100 mm/min, and the deter-
mination of the tensile properties of modified bitumen.
81-PV10C12 Research version exceeds all the above mentioned Standards requirements, and it is fully dedi-
cated to research (see page 535).
CUSTOMER’S VALUE
DRIVES THE INNOVATION
107
BITUMEN TESTING APPARATUS
Determination of ductility
main features
>> 4 tension lines (briquette capacity) x 1500 mm
>> Easy and free access to the large testing space
>> Closed-loop PID temperature control system
>> Stainless steel insulated water bath
>> Exclusive in-built thermoregulation system compen-
sating the exchange of heat and cooling, resulting
in very strict temperature control, optimized by the
connection to chiller (optional)
>> Adjustable speed range from 5 to 100 mm/min
>> High carriage return speed of 500 mm/min for
greater productivity
>> Elongation measurement by encoder read on display
Standards ASTM D113 | ASTM D6084 | AASHTO T51 | EN 13398 | EN 13589 | EN 13703
Temperature control
-- A closed-loop PID system
assures constant temperature
within ±0.2°C.
-- Plate-type base heaters give
better temperature uniformity.
Detail of the stainless steel water bath
with the protection for the lateral driving screw
-- The thermoregulation system
rods, by stainless steel too. is based on controlling the
108
main features
>> 4 tension lines (briquette capacity) x 1500 mm
>> Easy and free access to the large testing space
>> Double drive screw rod
>> Closed-loop PID temperature control system
>> Stainless steel insulated water bath
>> Exclusive in-built thermoregulation system compensating the control,
optimized by the connection to chiller (optional)
>> High carriage return speed of 500 mm/min for greater productivity
>> Adjustable speed range from 5 to 100 mm/min
>> PC-controlled using dedicated software
>> Includes a system for measuring forces up to 4x300 N with load cells (see
accessories)
>> Temperature range at 25±0.2°C and from 4 to 30 ± 0.2°C
>> Elongation measurement system by encoder
>> Real-time load and displacement graphics via PC
Standards EN 13589 | EN 13703 Carriage displacement temperature within strict limits Water cooling
Double-screw rods and mobile and permits the use of suitable This model is proposed without a
81-PV10B02 carriage enable test speeds from chiller (81-PV1002-04) for use with
standard water chillers.
Force-ductility 5 to 100 mm/min. The system a suitable cooling system that
High performance version also permits the fast return of Load and elongation measurement could be available in the labora-
the carriage at the end of the test Automatic measurement of the tory. It is important however, that
Machine control (500 mm/min) to reduce dead elongation by a encoder and of this unit is capable of delivering a
By PC (not included). time and increase productivity. the test load of the four testing flow rate of 6 litres/min, 1 bar, at
The carriage return is automatic, lines with load cells (not included). the minimum temperature of 2°C.
Water bath manual intervention is not re-
Insulated stainless steel water quired. See-through cover
bath with a heating system lo- Testing software
-- Selection of test parameters Essential for better temperature
cated over the entire base surface
Temperature control (speed, temperature etc.) by control of the bath.
and a stainless steel cooling coil
- A closed-loop PID system as- PC. The test temperature,
(for connection to water mains or
sures constant temperature of however, can be set in
chiller) distributed over the three
25±0.2°C. advance using the control
side walls assuring temperature Ordering information
uniformity without water turbu- -Temperature range from 4 to panel of the machine.
lence inside the bath. All parts in 30°C ±0,2°C with a water chiller 81-PV10B02
-- Test control by PC: Start-Stop-
contact with water are made of (see accessories). DUCTI-METER
Carriage return
stainless steel. -Stainless steel cooling coil High Performance Ductility testing
-- Specimen failure recognition machine.
-Plate-type base heaters give bet- -- Real-time display of load/ PC controlled, 4-briquette capacity, 1500
ter temperature uniformity. elongation graph with mm carriage travel, adjustable testing
-The thermoregulation system is advanced visualization options speed from 5 to 100 mm/min, thermo-
based on control of the heater statically controlled water bath at 25°C
(single or multi-graph).
(which increases the temperature ±0,2°C and from 4° to 30°±0.2°C, force
-- Data acquisition and measurement facility up to 300 N per line.
of the bath) and the control of processing conforming to 230 V, 50-60 Hz, 1 ph.
the flow rate of the cooling coil Standards 81-PV10B04
by an electro-valve. This impor- As above but 110 V, 60 Hz, 1 ph.
tant feature assures control of the -- Function for multiple test data
comparison
For technical specifications see page 111
-- Storage of test data
109
BITUMEN TESTING APPARATUS
Determination of ductility
Additional main features
>> Includes a system for measuring forces up to
2000 N (4x500 N)
with load cells (see accessories)
>> Temperature range from -10 to
60 ±0.2°C
>> Speed range adjustable from 1
to 200 mm/min
>> Extensive use of stainless steel
for frame, cover and tank
Ordering information
Typical screenshot of the machine software
81-PV10C12
Detail of water bath.
Easy and free eccess to the large testing DUCTI-METER
space, common to all versions Research Ductility testing machine.
PC controlled, 4-briquette capacity, 1500
mm carriage travel, adjustable testing
speed from 1 to 200 mm/min, thermo-
statically controlled water bath from
-10° to 60° ±0.2°C, force measurement
facility up to 500 N per line. 230 V, 50-60
Hz, 1 ph.
81-PV10C14
As above but 110 V, 60 Hz, 1 ph.
Detail of 81-PV10B02 and PV10C12 with four 81-PV10020 load cells and briquette moulds
110
Determination of ductility
Technical Specifications
Models 81-PV10A02 81-PV10B02 81-PV10C12
81-PV10A04 81-PV10B04 81-PV10C14
Conforms to Standards EN 13398 EN 13398 EN 13398
ASTM D113 EN 13589 EN 13589
ASTM D6084 EN 13703 EN 13703
AASHTO T51 ASTM D113, ASTM D6084, AASHTO T51, ASTM D113, ASTM D6084, AASHTO T51,
AASHTO T300 AASHTO T300
Machine control by Digital display PC with dedicated PC with dedicated
panel Software (PC not included) Software (PC not included)
Thermostatically controlled at 25±0.2°C at 25±0.2°C from -10 to 60 ±0.2°C with water chiller
water bath temperature: and from 4 to 30±0.2°C (see accessories). PID closed-loop control.
with water chiller (see accessories)
Temperature control system Heater and cooling coil for connection to Heater and cooling coil for connection to Heater and cooling coil for connection to
cold water or water chiller cold water or water chiller cold water or water chiller
Structure Stainless steel tank Stainless steel tank Extensive use of stainless steel for frame,
tank, cooling coil and cover
Briquette capacity 4
Max carriage travel 1500 mm
Testing speed Adjustable from 5 to 100 mm/min Adjustable from 5 to 100 mm/min Adjustable from 1 to 200 mm/min
Elongation measurement by Encoder (Linear scale) Encoder (Optical system) Optical system
Max. load and tension load -- 1200 N (4 x 300 N) by load cells 4 x 500 N by load cells
measurement (500N capacity.) (2000 N in total).
(Cells not included. See accessories.) (Cells not included. See accessories.)
Tension load/elongation graph -- Real-time graphs by PC Real-time graphs by PC
Carriage return speed 500 mm/min
Power rating (approx.) 1200 W
Transparent cover not included included included
Overall dimensions (l x d x h) 2434 x 412 x 385 mm
Weight (approx.) 100 Kg
111
BITUMEN TESTING APPARATUS
main features
>
>>>Touch-screen
Touch-screen display
display with
with 4.5”
4.5”color
color control
control panel,
panel, including
including timer
timer
function,
function, visual
visual warnings
warnings and
and digital
digital air
air flow
flow indicator.
indicator.
>
>>>Full
Full conformity
conformity toto temperature
temperature specifications
specifications (time
(time toto reach
reach target
target
temperature
temperature after
after switch
switch on,
on, target
target temperature
temperature adjustment
adjustment after
after samples
samples
insertion)
insertion) from
from the
the Standards
standards
>
>>>Carousel
Carousel rotation
rotation with
with closed-loop
closed-loop controlled
controlled speed
speed
>
>>>Safety
Safetyfeatures:
features:Automatic
Automaticover-temperature
over-temperatureswitch,
switch,door
doorswitch,
switch,pilot
pilotlamp
lamp
and
andalarm
alarmfor
fordoor
dooropen
openwith
withfan
fanstill
stillrunning;
running;magnetothermic
magnetothermicswitch
switch
>
>>>High
High quality
quality stainless
stainless steel
steel structure,
structure, internal
internal and
and external
external
>
>>>Door
Door with
with double-glazed
double-glazed window
window
>
>>>Door
Door locking
locking system
system allowing
allowing easy
easy opening
opening also
also with
with busy
busy hands
hands
Detail
Detailofofexternal
externalstainless
stainlesslining
lining“linen
“linenpatterned”
patterned”resistant
resistant
totoscratches
scratchesand
andshocks
shocks
81-PV2600 Pressure Ageing Vessel, featuring 81-PV2610 Vacuum Degassing Oven which is the
freely selectable test temperature, Programmable essential accessory to perform the tests conform-
pre-heating functions, User friendly software, Net- ing the Standards
work ready for remote monitoring, etc.
114
Detail of certified pressure vessel and cover
locking switch
Safety features:
ʰʰ Electrically locked top cover, to avoid
direct exposure of the pressure vessel Pressure transducer calibration menu Temperature and pressure target values vs actual values
during the test
ʰʰ Forced ventilation cooling system
allowing quick cooling of sample rack
and to avoid accidental burns
ʰʰ 60°C pre-heating limit for operator
safety during sample rack positioning
ʰʰ Over temperature limit switch
ʰʰ Over pressure relief valve
115
BITUMEN TESTING APPARATUS
Pressure Ageing Vessel (PAV) & Vacuum Degassing Oven (VDO) and related accessories
116
Vacuum Degassing Oven
main features
>> Platinum RTD temperature internal measurement to ± 0.1°C
>> Selectable test temperature (from ambient to 200°C) controlled to ±4.0°C
>> Integrated vacuum pump
>> Vacuum monitored by transducer and controlled to 15 ± 1.0 kPa absolute
pressure
>> Digital touch screen 6”display for temperature, vacuum, set points and
actual values
>> Reclining display allowing view from any angle
>> Over temperature limit switch
>> Network ready for remote monitoring of the test status from PC, Tablet or
Smartphone
Most Standards make a degassing oven of the PAV-aged asphalt sam- Specifications
ples mandatory. The Vacuum Degassing Oven (VDO) is designed to ʰʰ Working temperature range: ambient
remove air bubbles created during accelerated oxidative ageing of as- to 200°C
phalt binder by the PAV. This final conditioning makes the aged binder ʰʰ Temperature measurement: Platinum
suitable for further tests such as BBR, DSR, penetration, ductility, soften- RTD with ±0.1°C resolution
ing point and many more. ʰʰ Pressure measurement: pressure
The apparatus consists of a stainless steel vacuum vessel with encased transducer with ± 1 kPa resolution
band heaters and integral vacuum and temperature controls. A plati- ʰʰ Power: 600 W
num RTD measures internal test temperature to ±0.1°C. Selectable test ʰʰ Dimensions (l x w x h): 430x440x480
temperatures (from ambient to 200°C) are controlled to ±4.0°C. mm
Vacuum is provided by an integrated vacuum system monitored by a ʰʰ Weight approx.: 30 kg
pressure transducer and controlled to achieve 15 kPa absolute pressure.
Ordering information
Temperature and vacuum are indicated both as set points and as ac-
tual values on the 6” digital color touch screen display. Temperature and 81-PV2610 Double face sample rack positioning
vacuum calibration can be site executed. Data logs of both temperature Vacuum Degassing Oven conforming to
and vacuum are saved on USB stick or transferred to PC at the end of ASTM D6521, AASHTO R28, EN 14769 .
the test. 110-230 V, 50-60 Hz, 1 ph
The vacuum chamber can accept either eight 55x35 mm or four 70x45
mm (available as accessories) sample containers. Accessories and spares
117
BITUMEN TESTING APPARATUS
81-PV5902
118
Rheological properties of asphalt binders
main features
>> Designed specifically for Asphalt Testing >> Compact, integrated unit with small
>> Optimized for high throughput footprint
>> Meets and exceeds
AASHTO T315 and all ASTM requirements >> Dedicated AASHTO specification software
>> Simple to use, proven design package including:
>> Precise and stable temperature control - Pass/Fail medium temperature original
(patented) binder test (T315-11)
>> Rapid sample equilibrium to set temperature - Pass/Fail high temperature RTFO
binder(T315-11)
>> Significant reduction in need for regular re-
calibration of temperature - Pass/Fail high temperature PAV
binder(T315-11)
>> Pre set gaps for AASHTO tests - no zeroing
necessary - Linearity test (T315-12) - Grade determina-
tion test (R29-02)
>> Automatic Expansion Compensation keeps
gap constant with temperature >> Optional research grade software
81-PV6002
119
BITUMEN TESTING APPARATUS
Rotational Viscometers
main features
>> Data displayed:
- Selected speed
- Selected spindle
- Viscosity reading
- Percentage of full scale
- Relative and absolute
viscosity
>> Unit converter SI to CGS
>> AUTO-TEST
with visual and audible malfunction alarm
>> AUTO-RANGE function
>> User-enabled calibration
>> High resolution
>> Repeatability: 0.2%
120
Rotational Viscometers
main features
>> 12-key touchpad keyboard - Viscosity reading:
>> Direct readout on a graphic display dynamic viscosity
(cP or mPa·s) or kinematic viscosity (cSt)
>> Data displayed:
>> Program features:
- Selected speed
- Time to torque: target torque pre-setting
- Selected spindle device
- Viscosity reading - Time to stop: target time pre-setting
- Percentage of full scale device
- Sample temperature - 10 working memories
- Shear rate - Customizable options
(with coaxial spindles) - Programmable
- Shear stress (with coaxial spindles) - Multistep
- Density - Ramp
(entered by the user)
>> AUTO-TEST with visual and audible malfunc-
- Step program status tion alarm
- Analysis and visual characteristics >> AUTO-RANGE function
(flow curves)
>> Temperature reading
>> User-enabled viscosity and temperature
calibration
>> 10 language options
81-PV0118/A
Rotational viscometer
Ordering information Accessories holds the container with the sample, into
High Performance version which a suitable spindle is immersed
81-PV0118 (for both versions)
and driven by the rotary viscometer to
Technical specifications Rotational viscometer, standard version, 81-PV0118/1 measure viscosity. A digital microprocessor
ʰʰ Viscosity range: supplied complete with stand, boss head, Temperature control unit, temperature control unit assures that the required test
100-40,000,000 cP spindle protection, spindle rack and power range from 5 to 300° C. Complete with set temperature is maintained.
ʰʰ Rotational speed range: supply cable. 100-240 V, 50-60 Hz, 1 ph. of 4 spindles. 220-240 V, 50-60 Hz, 1 ph.
0.01-250 rpm 81-PV0118/A 81-PV0118/1Z
ʰʰ Selectable speeds: 2600 Same as above but 110 V, 60 Hz, 1 ph.
Rotational viscometer, high performance
Resolution: version, supplied complete with stand, 81-PV0118/2
ʰʰ Using low viscosity adapter: boss head, spindle protection, spindle rack, Aluminium disposable test chamber
0.01 cP calibration certificate, USB cable,
ʰʰ For viscosity lower 81-PV0118/3
Datalogger software and power supply
than 10.000 cP: 0.1 cP cable. 100-240 V, 50-60 Hz, 1 ph. Stainless steel reusable test chamber
ʰʰ For viscosity equal to or above
10,000 cP: 1cP Description
ʰʰ Repeatability: 0.2% The control unit consists of a heating
Thermometer features: chamber that works in conjunction with
ʰʰ Temperature range: rotary viscometers at high temperatures.
0 to 100° C; 32 to 212°F According to the specifications of ASTM
ʰʰ Resolution: 0.1°C; 0.1722°F D4402, viscosity of solid road unfilled
ʰʰ Precision: ±1°C; ±2°F asphalts has to be measured at tempera-
ʰʰ Shipping weight:approx.8 kg tures ranging from 34 to 260° C. The heater 81-PV0118/A with 81-PV0118/1
121
INDEX
Analytical Index
A Dynamic modulus E* testing module for AMPT Pro, 88
Accessories for ring and ball apparatus, 106 Dynamic modulus guided axial LVDT mounting hardware, 79
Accessories for UTM, 76-81 Dynamic shear rheometer, 119
Adaptors for DWT trackers, 55 DynaQube, Electromechanical operated asphalt mixture performance tester, 86
Additional temperature probes for DWT trackers
Advanced dynamic testing, 56-101 E
Air compressor assembly for AMPT Pro, 88 Electromechanical multisize slab compactors, 20
Air compressor assembly for AsphaltQube and AST PRO, 93, 95 Electronic balance for Galileo gyratory compactor, 43
Air compressors for Gyrocomp, 47 EmS, Electromechanical Servoactuation technology, 41
AMPT consumable kit, 88 Environmental chamber for servo-pneumatic Four bend test apparatus, 99
AMPT Pro, Asphalt mixture performance tester, 84 Environmental chamber for UTM 16P, 65, 70
Asphalt binder analyser, ignition method, 12 Environmental chambers for AsphaltQube, 93
Asphalt core drill, 26 Environmental chambers for UTM 130, 69, 70
Asphalt mixture performance tester, 84 Environmental chambers for UTM 30, 67, 70
Asphalt prism shearbox compactor, 18 Extra large four point bend jig, 81
Asphalt saws, 29
AsphaltQube, Modular electro-mechanically operated Asphalt Tester, 92 F
AST PRO, Modular servo-hydraulic asphalt tester, 94 Face shield, 13
Automatic asphalt analyser, 8 Flow number testing module for AMPT Pro, 88
Automatic core docking jigs, 32 Flow time testing module for AMPT Pro, 88
Automatic laboratory mixer, 16 Force-ductility measurement, 109
Automatic Ring & Ball apparatus, 106 Four point bend apparatus, Servo-pneumatic, 98
Automatic triaxial cell, 77 Four point bend jig for Asphalt Qube and AST Pro, 97
Autosaw II, Advanced automated asphalt saw, 30 Four point bend jigs, 81, 97
Auxiliary digital balance for Bitumax, 13
G
B Galileo gyratory compactors, 36, 44
BBR, Bending Beem Rheometer, 118 Galileo Research gyratory compactor, 39
Bending beem rheometer, 118 Gauge clamp assembly, 79
Bitumax, Asphalt binder analyser, 12 Gauge point frixing jig for AMPT and DynaQube, 91
Bitumen oven, 112 Glass transfer dish for penetrometer, 105
Bitumen testing apparatus, 102-121 Guided axial LVDT mounting hardware, 79
Bitumix, Automatic laboratory mixer, 16 Gyratory compactors Servopac, 48-49
Briquette moulds, 111 Gyrocomp, gyratory compactors, 46-47
C H
Calibrator blocks for ILS, 47 Hamburg type DWT wheel trackers, 53, 54
Centrifuge cups for asphalt analyser, 11 Heater for shearbox box walls, 19
Clamp system for core drill, 28 Heating control system for sector heads, 25
Closing lid for asphalt analyser, 11
Core bits, 28 I
Core drill, 26 Ignition binder analyser, 12
Creep testing jig platen, 79 ILS, Internal angle measurement apparatus, 45
Cyclic & permanent deformation creep testing jig platen, 79 IMACS, Digital controller and data acquisition system, 71
Cylinder moulds for gyratory compactors, 44 Indirect tensile jig base and platen, 78, 96
Indirect tensile test jig for AMPT Pro and DynaQube, 90
D Integrated electromechanical extruder, 43
Diamond blade, 32 Integrated work top with electromechanical extruder for Gyrocomp, 47
Diaphragm pump, 112 Interchangeable sector heads, 25
Digital circulation water bath for penetrometer, 105 Internal angle measurement apparatus, 45
Disk-Shaped compact tension jig, 78
Distance plates for gyratory compactors, 44 J
Docking jigs, 32,33 Jig for Texas Overlay test, 32, 33
DSR, Dynamic shear rheometer, 119 Jig for wheel tracking, 32, 33
DUCTI METER, Ductility testing machine, 108
DUCTI METER, Ductility testing machine, high performance version, 109 K
DUCTI METER, Ductility testing machine, research version, 110 KorBit, 28
Ductility testing machines, 107-111
DWT, Double Wheel Trackers, 50-55
122
L Set of trays with handles for cylindrical samples, 55
Laboratory mixer, 16 Set of two mould adaptors for DWT trackers, 55
Lifting system for loading wheels, 55 Set of two moulds for DWT trackers, 55
Load cells for max load measurement, 111 Shearbox compactor, 18
Low noise air compressors for Gyrocomp, 47 Slab compactors, 20
Small diameter specimen kit for Dynamic modulus E* AMPT Pro, 88, 89
M Solvent testing devices for asphalt analyser, 11
Magnetic penetrometer needle, 105 Spare sample container for PAV, 116
Manual core docking jigs, 32, 33 Standard penetration cone, 105
Metal stand, 13 Standards related to dynamic tests, 74
Mixer, laboratory, 16 Support base for ductility machines, 111
Motorized mould lifting and Shear measurement system, 43
Moulds for DWT trackers, 55 T
Moulds for slab compactors, 25 Temperature control unit for rotational viscometers, 121
Multi-Core drill, 26 Temperature measurement kit, 65, 70
MULTISAW, Asphalt saw, 32 Temperature probes for DWT trackers, 55
Multisize slab compactors, 20 Tension platen fixing jig for specimen preparation, 91
Testing kit for Dynamic modulus E*, Flow Time and flow Number, 97
N Thermal asphalt multi test system, 100
Needles for penetrometer, 105 Thermometers for penetrometer, 105
Transducer and mounting kit for AMPT testing modules, 88
O Transparent machine cover, 108
Overlay test jig, 79, 90 Transversal bidirectional coring system, 27
Trapezoidal specimen jig, 32, 33
P Trapezoidal two point bend jig for Asphalt Qube and AST Pro, 97
PAV, Pressure ageing vessel, 114 Trapezoidal two point bend jig, 81, 97
Pavelab 50, Automatic closed-system asphalt analyzer, 8 Triaxial cell for 100 mm tall specimens, 96
PC assembly (all-in-one touch screen) for AMPT Pro, 88 TSRST & UTSST kit, 80, 100
PC assembly (all-in-one touch screen) for AsphaltQube, 93 TSRST plus accessories, 101
PC software for Galileo basic compactor, 43 TSRST plus, Thermal asphalt multi test system, 100
Penetrometer needles, 105
Penetrometer, fully automatic, 104 U
Pivot, Fully automatic penetrometer, 104 Uniaxial fatigue small diameter specimen kit for AMPT Pro and DynaQube, 88, 89
Pneumatic filtration kit, 19 Uniaxial fatigue S-VECD UTM tension kit, 80, 89
PREsBOX, Asphalt prism shearbox compactor, 18 Universal Hamburg type and EN wheel tracker, 55
Pressure ageing vessel, 114 Universal triaxial cell, 77
Printer, serial, 11 Upgrade with translation device for core drill, 28
PRO-COMPACT closed loop system, 22 UTM 130, Servo hydraulic universal testing machines, 68
Proving ring assembly for AMPT Pro, 88 UTM 16P, Servo-pneumatic universal testing machine, 64
UTM 30, Servo hydraulic universal testing machines, 66
R UTM Testing modules, 76-81
Reaction frame for AsphaltQube and AST PRO, 93, 95 UTM, Universal Testing Machines, 62-73
Reaction frame kit for TSRST plus, 101 UTS, Software for dynamic testing machines, 72
RFTOT, Rolling thin film oven, 112
Ring & Ball apparatus, 106 V
Rolling thin film oven, 112 Vacuum degassing oven, 117
Rotational viscometers, 120 VDO, Vacuum degassing oven, 117
Verified penetrometer needle, 105
S Vibrating roller option for sector heads, 25
Sacrifical PVC tube, 32
Sample baskets for Bitumax, 13 W
Sample cups for penetrometer, 105 Washing drums for asphalt analyser, 11
Saws, asphalt, 29 Water chillers for ductility machines, 111
Sector heads for slab compactors, 25 Water cooling system for asphalt analyser, 11
Semi-Circular Bend SCB accessories, 76, 90, Water tank covers, 55
Serial printer, 11 Water temperature controller for penetrometer, 105
Servopac gyratory compactor, 49
Servo-Pneumatic Four point bend apparatus, 98
123
INDEX
Code Index
75 76-PV75200/UP 49 77-PV44102 25
75-PV0005/2 11 76-PV75202 49, 112 77-PV45001 25
75-PV5X010 11 76-PV75204 49, 112 77-PV45011 25
75-PV5X010/C 11 76-PV75210 27, 28, 49 77-PV45102 25
75-PV5X20 11 76-PV75220 27, 49 77-PV46001 25
75-PV5X020/C 11 76-PV75230 49 77-PV46011 25
75-PV5X30 11 77-PV46102 25
75-PV5X030/C 11 77 77-PV47000/1 32
75-PV5X040 11 77-PV3/001 55 77-PV47000/2 32
75-PV5X100 10, 11 77-PV3/002 55 77-PV47005 28, 32, 33, 59
75-PV5X110 11 77-PV3/003 55 77-PV47006 28, 33, 59
75-PV5X120 11 77-PV3/005 55 77-PV47011 32, 33
75-PV5X135 11 77-PV3/011 55 77-PV47013 32, 33, 44
75-PV5X136 11 77-PV3/012 55 77-PV47015 32, 33
75-PV5X150 11 77-PV3UP10 55 77-PV47020 32, 33, 44
75-PV5X160 11 77-PV3UP20 55 77-PV47025 32, 33
75-PV5X170 11 77-PV3UP30 54, 55 77-PV47030 32, 33
75-PV5X180 11 77-PV31A15 54 77-PV47105 28, 32
75-PV0008 13 77-PV31A16 50, 54, 55 77-PV47106 28, 32
75-PV0008/2 13 77-PV31A25 53, 54
75-PV0008/5 13 77-PV31A26 53, 54 78
75-PV0008/10 13 77-PV32E05 50, 54 78-P8000/PC 26
75-PV0008/12 13 77-PV33B05 53, 55 78-PV20A02 25, 113
75-PV0008/14 13 77-PV33B06 55 78-PV20A04 113
75-PV0008/Z 13 77-PV33D05 51, 53, 55 78-PV20G02 43
75-PV50A15 11 77-PV33D06 55 78-PV20R02 43
75-PV50A16 11 77-PV33E05 54 78-PV20/SOF 43
75-PV50A25 8, 9, 10, 11 77-PV41A02 20, 23, 24 78-PV20UP1 43
75-PV50A26 11 77-PV41A04 20, 23, 24 78-PV20UP2 43
75-PV50/KIT 11 77-PV41C00/UP 25 78-PV20UP3 43
77-PV41C05 20, 23, 24 78-PV20UP4 43
76 77-PV41C06 20, 23, 24 78-PV20001 26
76-PV20A02 112 77-PV46A02 19 78-PV20002 77
76-PV0250/2 43, 44 77-PV0077/C 17 78-PV20003 91
76-PV0250/3 44, 116 77-PV4310 25 78-PV20004 44
76-PV0250/4 44, 116 77-PV4602 19 78-PV20005 48
76-PV0250/5 43, 117 77-PV4604 19 78-PV20006 48
76-PV0250/6 116, 117 77-PV42001 25 78-PV20007 48
76-PV0250/7 46 77-PV42011 25 78-PV20008 48
76-PV0250/7Y 46 77-PV42102 25, 112
76-PV0250/7Z 46 77-PV43001 25 79
76-PV0250/10 116, 117 77-PV43011 25 79-PV70A02 65, 70
76-PV0255 28, 44, 45, 47, 112 77-PV43012 25 79-PV70A12 65, 70
76-PV0255/1 44 77-PV43022 25 79-PV70A14 65
76-PV2520/15 99 77-PV43024 25 79-PV70B02 66, 67, 70
76-PV2520/15Z 99 77-PV44001 25 79-PV70B12 66, 67, 70
76-PV2522 45, 99 77-PV44011 25 79-PV70C05 68, 69, 70
124
79-PV70C06 68, 69, 70 79-PV70642 101 81-PV0103 104
79-PV70C15 68, 69, 70 79-PV70643 101 81-PV0113/AM 105
79-PV70C16 68, 69, 70 79-PV70680 79 81-PV0118 120, 121
79-PV70E02 31, 65, 70 79-PV71000 88, 93, 97 81-PV0143 106
79-PV70E12 67, 70 79-PV71001 88, 93, 97 81-PV0143/1 106
79-PV70E22 67, 70 79-PV71002 88 81-PV0143/Z 106
79-PV70E32 69, 70 79-PV71010 88 81-PV0145/1 106
79-PV70E42 69, 70 79-PV71011 88 81-PV0145/2 106
79-PV70E52 69, 70 79-PV71012 88 81-PV0145/3 106
79-PV71A12 85 79-PV71031 88 81-PV0161/10 111
79-PV71Q02 87 79-PV71102 49 81-PV0161/12 111
79-PV72A12 47 79-PV71210 88, 89 81-PV1002 95
79-PV72E12 28, 47, 93 79-PV71211 88, 89 81-PV1004 111
79-PV72E14 47, 93 79-PV71212 88 81-PV1012 111
79-PV72E22 47 79-PV71213 88 81-PV1014 111
79-PV72E24 96 79-PV72001 93, 96 81-PV1612 111
79-PV72Q02 93 79-PV72101 47 81-PV1613 111
79-PV74A02 44 79-PV72201 47 81-PV1614 111
79-PV75A02 100, 101 79-PV72301 47 81-PV1622 111
79-PV70110 47, 78 79-PV72500 47 81-PV2600 43, 112
79-PV70115 101 79-PV74002 45 81-PV2610 43, 112
79-PV70116 65, 71 79-PV75000 100, 101 81-PV5902 118
79-PV70130 76 79-PV75001 101 81-PV5904 118
79-PV70131 76 79-PV75002 101 81-PV6000/1 119
79-PV70136 76 79-PV75003 101 81-PV6000/2 119
79-PV70139 76 81-PV6002 119
79-PV70180 79 81 81-PV10010 111
79-PV70200 81 81-B0102/D 104, 105 81-PV10020 110, 111
79-PV70300 77 81-B0109 105 81-PV10030 108
79-PV70330 77 81-B0110/A 105 82-B0100/6 105
79-PV70400 81 81-B0110/B 105 82-B0122/4 105
79-PV70402 81 81-B0113 105 82-B0125/2 105
79-PV70410 31 81-B0113/1 105 82-P0172/1 106
79-PV70420 81 81-B0113/A 105 82-P0172/B 9, 11
79-PV70502 88, 112 81-B0115 105 82-PV0160/10 112
79-PV70503 79 81-B0141 95 83-C0320 28
79-PV70507 88 81-B0141/A 95 83-C0321 49
79-PV70521 79 81-B0141/B 95 83-C0322 28, 49
79-PV70524 88 81-B0142 95
79-PV70600 80 81-PV10A02 97, 107, 108, 111
79-PV70602 78 81-PV10A04 95, 108, 111
79-PV70610 89 81-PV10B02 95, 107, 109, 110, 111
79-PV70617 88 81-PV10B04 109, 111
79-PV70618 88 81-PV10C12 95, 107, 110, 111
79-PV70619 88, 89 81-PV10C14 110, 111
79-PV70640 80 81-PV59/01 118
79-PV70641 101 81-PV59/02 118
125
INDEX
Standard index
AASHTO AS
AASHTO R28 37, 43, 90, 111, 116 AS 03:2000 81, 93, 95, 96
AASHTO T316 120, 121 ASTM D113 95, 107, 108, 111
AASHTO T321 21, 22, 75, 81, 93, 95, 96, 111, 117 ASTM D127 104
AASHTO T324 32, 33, 50, 52, 53, 54, 55, 75 ASTM D2196 120, 121
AASHTO T 342/TP 62 74, 77, 79, 83, 93, 97 ASTM D2872 111
AASHTO TP10 75, 76, 80, 89, 100, 101, 111, 112 ASTM D4402 120, 121
AASHTO TP31 46, 78, 111 ASTM D6084 95, 108, 111
AASHTO TP 79 26, 77, 79, 89, 83, 85, 88, 89, 93, 97, ASTM D6521 42, 43, 90, 111
AASHTO TP 124 76, 83, 93, 97, 112 ASTM D7175 119
126
ASTM WK 26816 83, 93, 97 EN 13589 95, 107, 108, 109, 110, 111
BS 598-111 79 IP
DIN JIS
EN NCHRP
EN 1426 104, 105 NCHRP 9-29 77, 79, 83, 88, 89, 96
EN 12697-22 16, 50, 53, 54, 55, 75 Tex 248-F 83, 93, 95
EN 12697-25A 74, 79
EN 12697-26E 74, 80
EN 12697-35 16
EN 12697-39 12
127
INDEX
128
› Advanced
Pavements
testing
systems
› Advanced
Pavements
testing
systems
A d v a n c e d Pave m e n t s t e s t i n g s y s t e m s
Italy
controlsitalia.it
France
controls.fr
Iraq
controlsmiddleeast.com
Mexico
controls.com.mx
Poland
controls.pl
Spain
controls.es
United Kingdom
controlstesting.co.uk
USA
controls-usa.com
pavelabsystems.com
CONTROLS S.p.A.
is certified ISO 9001:2008
controls-group.com
IPC-CG 17/E/CB/3
wfi.co.uk
ipcglobal.com.au
In line with its continual program of
product research and development,
CONTROLS S.p.A. reserves the right to alter
specifications to equipment to any time.