Beruflich Dokumente
Kultur Dokumente
MATHEMATICS
SECTION–I : (Maximum Marks : 21)
This section contains SEVEN questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct.
For each question, darken the bubble corresponding to the correct option in the ORS.
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If only the bubble corresponding to the correct option is darkened.
Zero Marks : 0 If none of the bubbles is darkened.
Negative Marks : –1 In all other cases
37. Three randomly chosen nonnegative integers x, y and z are found to satisfy the equation
x + y + z = 10. Then the probability that z is even, is
36 6 5 1
(A) (B) (C) (D)
55 11 11 2
Ans. (B)
Sol. Let z = 2k, where k = 0, 1, 2, 3, 4, 5
x + y = 10 – 2k
Number of non negative integral solutions
5
112k C1 = 11 2k = 36
k 0
10+3–1
Total cases = C3–1 = 66
36 6
Reqd. prob. =
66 11
38. Let S = {1, 2, 3,.....,9}. For k = 1,2, ....., 5, let Nk be the number of subsets of S, each containing
five elements out of which exactly k are odd. Then N1 + N2 + N3 + N4 + N5 =
(A) 125 (B) 252 (C) 210 (D) 126
Ans. (D)
Sol. N1 + N2 + N3 + N4 + N5 = Total ways – {when no odd}
Total ways = 9C5
Number of ways when no odd, is zero ( only available even are 2, 4, 6, 8)
Ans : 9C5 – zero = 126
1 1
39. If ƒ : is a twice differentiable function such that ƒ''(x) > 0 for all x , and ƒ , ƒ(1) 1 ,
2 2
then
1 1
(A) 0 ƒ '(1) (B) ƒ '(1) 0 (C) ƒ '(1) 1 (D) ƒ '(1) 1
2 2
Ans. (C)
JEE-Adv-2017-P2 [Code - 9] 1
1
Sol. Using LMVT on ƒ(x) for x , 1
2
1
ƒ(1) ƒ
2 ƒ '(c) 1
, where c ,1
1 2
1
2
1
1
2 ƒ '(c) ƒ '(c) 1 , where c 1 ,1
1 2
2
ƒ'(x) is an increasing function x R
ƒ'(1) > 1
40. If y = y(x) satisfies the differential equation
1
8 x 9 x dy 4 9 x dx, x0
y(x) 4 9 x C
at x = 0 : y(0) 7 C=0
y(x) 4 9 x
y(256) = 3
41. How many 3 × 3 matrices M with entries from {0,1,2} are there, for which the sum of the diagonal
T
entries of M M is 5 ?
(A) 198 (B) 126 (C) 135 (D) 162
Ans. (A)
JEE-Adv-2017-P2 [Code - 9] 2
a b c
Sol. Let M d e ƒ
g h i
T 2 2 2 2 2 2 2 2 2
tr(M M) = a + b + c + d +c + ƒ + g + h + i = 5, where entries are {0,1,2}
Only two cases are possible.
(I) five entries 1 and other four zero
9
C5 × 1
(II) One entry is 2, one entry is 1 and others are 0.
9
C2 × 2!
Total = 126 + 72 = 198.
42. Let O be the origin and let PQR be an arbitrary triangle. The point S is such that
OP.OQ OR.OS OR.OP OQ.OS OQ.OR OP.OS
P(p)
Q(q) R(r)
Triangle PQR has S as its orthocentre
option (B) is correct.
JEE-Adv-2017-P2 [Code - 9] 3
43. The equation of the plane passing through the point (1,1,1) and perpendicular to the planes
2x + y – 2z = 5 and 3x – 6y – 2z = 7, is-
(A) 14x + 2y + 15z = 31 (B) 14x + 2y – 15z = 1
(C) –14x + 2y + 15z = 3 (D) 14x – 2y + 15z = 27
Ans. (A)
Sol. The normal vector of required plane is parallel to vector
ˆi ˆj kˆ
= 2 1 2 14iˆ 2ˆj 15kˆ
3 6 2
14x 2y 15z 31
98 k 1
k 1
44. If I dx , then
k 1 k x x 1
49 49
(A) I (B) I < loge99 (C) I (D) I > loge99
50 50
Ans. (B,C)
JEE-Adv-2017-P2 [Code - 9] 4
98
k1 k 1
Sol. I = dx
k 1
k x x 1
98
k 1 1 1
= k 1
k 1
k
dx
x x 1
98
k 1 n x n x 1
k 1
= k
k 1
98
= k 1 n k 1 n k 2 n k n k 1
k 1
98 98 98
(Difference series)
2 (99)100
I = (99 n 99) + (–99 n 100 + n 2) + (n 99) = n 99 ......(1)
(100)
99 99
2 (99)99
(100) > 2.(99) 1
(100) 99
2 (99)100
99 (on multiplying by 99)
(100) 99
I < n99
For option (C) :
98 k 1 98 k 1
k 1 (k 1)dx
Since,
k 1 k (x 1) 2
dx
k 1
x(x 1)
k
98
1
k 2 I
k 1
(on integration)
1 1 1 1
...... I
3 4
5 100
98 terms
98 1 1 1 1
...... I
100 3 4 5 100
49
I
50
Hence option (C) is correct.
JEE-Adv-2017-P2 [Code - 9] 5
45. If ƒ : is a differentiable function such that ƒ'(x) > 2ƒ(x) for all x , and ƒ(0) = 1, then
2x
(A) ƒ(x) > e in (0,) (B) ƒ(x) is decreasing in (0,)
2x
(C) ƒ(x) is increasing in (0,) (D) ƒ'(x) < e in (0,)
Ans. (A,C)
Sol. Given that,
f '(x) > 2f(x) x R
f '(x) – 2f(x) > 0 x R
e–2x (f '(x) – 2f(x)) > 0 x R
d –2x
dx
e f (x) > 0 x R
JEE-Adv-2017-P2 [Code - 9] 6
n 1
ƒ'(x) = 0 x
, cos 2x
2 4
more than two solutions
47. Let and be nonzero real numbers such that 2(cos – cos) + cos cos = 1. Then which of
the following is/are true ?
(A) tan 3 tan 0 (B) 3 tan tan 0
2 2
2 2
(C) tan 3 tan 0 (D) 3 tan tan 0
2 2
2 2
Ans. (A,C)
Sol. 2(cos – cos) + cos cos – 1 = 0 (1)
1 tan 2 1 tan 2
usecos = 2 and cos = 2 in (1)
2
1 tan 2 1 tan
2 2
2 2
We get tan = 3tan tan + 3 tan 0 or tan 3 tan 0
2 2 2 2 2 2
Hence (A, C)
sin 2x
48. If g(x) = sin 1 t dt , then
sin x
(A) g' = –2 (B) g' = 2 (C) g' = 2 (D) g' = –2
2 2 2 2
Ans. (BONUS)
sin 2x
–1 –1
Sol. g(x) = sin 1 t dt g'(x) = 2sin (sin 2x) × cos 2x – sin (sinx)cosx
sin x
g' = 0 & g' = 0
2 2
JEE-Adv-2017-P2 [Code - 9] 7
Sol. Area between y = x3 and y = x y=x3 y=x
in x (0,1) is Q
1
1
A x x 3 dx 4 P
0
O
A 1
Area of curve linear triangle OPQ x=
2 8
1
x x3 dx 8
2 4 4 2 1 0
0
2 1 2 1
2 1
2
2
2
1 x 1 1 x 1
50. Let f(x) = cos for x 1. Then
1 x 1 x
(A) limx 1+ f(x) does not exist (B) limx 1– f(x) does not exist
(C) limx 1– f(x) = 0 (D) limx 1+ f(x) = 0
Ans. (A,C)
1
(1 x) cos 1 x , x 1
Sol. ƒ(x)
(1 x) cos 1 , x 1
1 x
lim ƒ(x) d.n.e, lim ƒ(x) 0
x 1 x 1
JEE-Adv-2017-P2 [Code - 9] 8
QR
Sol. OX
QR
RP
OY
RP
OX OY sin R sin P Q
52. If the triangle PQR varies, then the minimum value of cos(P + Q) + cos(Q + R) + cos(R + P) is
3 3 5 5
(A) (B) (C) (D)
2 2 3 3
Ans. (B)
3
Sol. –(cos P + cosQ + cosR) as we know cosP + cosQ + cosR will take its maximum value when
2
PQR
3
PARAGRAPH 2
Let p,q be integers and let be the roots of the equation, x2 – x – 1 = 0, where . For
n = 0,1,2,...., let an = pn + qn.
JEE-Adv-2017-P2 [Code - 9] 9
JEE(Advanced) – 2017 TEST PAPER WITH SOLUTION
(HELD ON SUNDAY 21st MAY, 2017)
PHYSICS
SECTION–I : (Maximum Marks : 21)
This section contains SEVEN questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct.
For each question, darken the bubble corresponding to the correct option in the ORS.
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If only the bubble corresponding to the correct option is darkened.
Zero Marks : 0 If none of the bubbles is darkened.
Negative Marks : –1 In all other cases
1. A rocket is launched normal to the surface of the Earth, away from the Sun, along the line joining
the sun and the Earth. The Sun is 3 × 105 times heavier than the Earth and is at a distance 2.5 ×104
times larger than the radius of the Earth. The escape velocity from Earth's gravitational field is ve =
11.2 km s–1. The minimum initial velocity (vs) required for the rocket to be able to leave the Sun-
Earth system is closest to (Ignore the rotation and revolution of the Earth and the presence of any
other planet)
(A) vs = 22 km s–1 (B) vs = 72 km s–1 (C) vs = 42 km s–1 (D) vs = 62 km s–1
Ans. (C)
2GM e
Sol. Given v e 11.2km / sec Re
From energy conservation
1 GM s m GM e m
mvs2 00 where r = distance of rocket from Sun
2 r Re
2GM e 2GMs
vs
Re r
5 4
given : Ms = 3 × 10 Me & r = 2.5 × 10 Re
2GM e 2G 3 105 M e
vs
Re 2.5 104 R e
2GM e 3 105
1
R e 2.5 10 4
2GM e
13
Re
vs 42km / s
JEE-Adv-2017-P2 [Code - 9] 1
2. Three vectors P, Q and R are shown in the figure. Let S be any point on the vector R . The distance
between the points P and S is b R . The general relation among vectors P, Q and S is :
Y b|R|
P
P S R=Q–P
S
Q Q
O X
(A) S 1 b P b 2 Q (B) S b 1 P bQ (C) S 1 b P bQ (D) S 1 b 2 P bQ
Ans. (C)
Sol. Let vector from point P to point S be C
R
C = b R Rˆ = b R = bR = b Q P
R
3. A symmetric star shaped conducting wire loop is carrying a steady state current I as shown in the
figure. The distance between the diametrically opposite vertices of the star is 4a. The magnitude of
the magnetic field at the center of the loop is :
4a
0I 0I 0 I 0I
(A) 3 3 1 (B) 6 3 1 (C) 6 3 1 (D) 3 2 3
4a 4a 4a 4a
Ans. (B)
JEE-Adv-2017-P2 [Code - 9] 2
Sol. The given points (1, 2, 3, 4, 5, 6) makes 360° angle at 'O'. Hence angle made by vertices 1 & 2 with
'O' is 60°.
1
30° 30°
6 B 2
60°
A
O
A
5 3 30°
60°
a
O
4
Direction of magnetic field at 'O' due to each segment is same. Since it is symmetric star shape, magnitude
will also be same.
Magnetic field due to section BC.
ki ki
B1 sin 60 sin 30
a 2a
3 1
6ki
Bnet = 12 × B1 =
a
3 1 & k 0
4
hc
4. A photoelectric material having work-function 0 is illuminated with light of wavelength .
0
The fastest photoelectron has a de-Broglie wavelength d. A change in wavelength of the incident
light by results in a change d in d. Then the ratio d/ is proportional to
(A) 3d / 2 (B) 3d / (C) d2 / 2 (D) d/
Ans. (A)
Sol. According to photo electric effect equation :
hc
KEmax = 0
p2 hc
0
2m
2
h / d hc
0
2m
Assuming small changes, differentiating both sides,
h 2 2d d hc
2 d
2m 3d
dd d3
2
d
JEE-Adv-2017-P2 [Code - 9] 3
5. A person measures the depth of a well by measuring the time interval between dropping a stone and
receiving the sound of impact with the bottom of the well. The error in his measurement of time is
T = 0.01 second and he measures the depth of the well to be L = 20 meters. Take the acceleration
due to gravity
–2 –1
g = 10 ms and the velocity of sound is 300 ms . Then the fractional error in the measurement, L/L,
is closest to
(A) 0.2 % (B) 5 % (C) 3 % (D) 1 %
Ans. (D)
Sol. Total time taken
2L L
T
g c
Now, for an error L in L,
We have an error T in T
2 L L L L
So, T T
g c
2L L L L
1 1
g L c L
T
Since, is very small, hence
T
L
is also small, so taking binomial approximation
L
2L 1 L L L
T T 1 1
g 2 L c L
2L 2L 1 L L L L
T T
g g 2 L c c L
2L L 1 2L L L
g c 2 g c L
1 2 20 20 L
T
2 10 300 L
1 L
T 1
15 L
L 15
T
L 16
15 1
16 100
JEE-Adv-2017-P2 [Code - 9] 4
L
% error = 100%
L
15
%
16
1%
6. Consider an expanding sphere of instantaneous radius R whose total mass remains constant. The expansion
is such that the instantaneous density remains uniform throughout the volume. The rate of fractional change
1 d
in density is constant. The velocity v of any point on the surface of the expanding sphere is proportional
dt
to :
1
(A) R3 (B) (C) R (D) R2/3
R
Ans. (C)
m 3m
Sol. Density of sphere is
v 4R 3
1 d 3 dR
dt R dt
1 d
Since is constant
dt
dR
R
dt
dR
Velocity of any point on the circumfrence V is equal to (rate of change of radius of outer layer).
dt
7. Consider regular polygons with number of sides n = 3, 4, 5 ..... as shown in the figure. The center
of mass of all the polygons is at height h from the ground. They roll on a horizontal surface about
the leading vertex without slipping and sliding as depicted. The maximum increase in height of the
locus of the center of mass for each polygon is . Then depends on n and h as :
h h h
2 2
(A) h sin (B) h sin
n n
1 2
(C) h 1 (D) h tan
cos 2n
n
JEE-Adv-2017-P2 [Code - 9] 5
Ans. (C)
h /n
Sol.
O
h /n
h/cos /n
A
B
OA = h
h
OB =
cos
n
Initial height of COM = h
h
Final height of COM =
cos
n
h
h
cos
n
1
h 1
cos
n
SECTION–2 : (Maximum Marks : 28)
This section contains SEVEN questions.
Each question has FOUR options (A), (B), (C) and (D). ONE OR MORE THAN ONE of these four
options is (are) correct.
For each question, darken the bubble(s) corresponding to all the correct option(s) in the ORS
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the bubble(s) corresponding to all the correct option(s) is (are)
darkened.
Partial Marks : +1 For darkening a bubble corresponding to each correct option,
Provided NO incorrect option is darkened.
Zero Marks : 0 If none of the bubbles is darkened.
Negative Marks : –2 In all other cases.
for example, if (A), (C) and (D) are all the correct options for a question, darkening all these three will
get +4 marks; darkening only (A) and (D) will get +2 marks; and darkening (A) and (B) will get –2 marks,
as a wrong option is also darkened
JEE-Adv-2017-P2 [Code - 9] 6
8. A rigid uniform bar AB of length L is slipping from its vertical position on a frictionless floor (as
shown in the figure). At some instant of time, the angle made by the bar with the vertical is . Which
of the following statements about its motion is/are correct ?
A
L
B
O
(A) When the bar makes an angle with the vertical, the displacement of its midpoint from the initial
position is proportional to (1 – cos)
(B) The midpoint of the bar will fall vertically downward
(C) Instantaneous torque about the point in contact with the floor is proportional to sin
(D) The trajectory of the point A is a parabola
Ans. (A), (B), (C)
L
Sol. When the bar makes an angle ; the height of its COM (mid point) is cos
2
L L
displacement = L – cos (1 cos )
2 2
Since force on COM is only along the vertical direction, hence COM is falling vertically downward.
Instantaneous torque about point of contact is
L
Mg × sin
2
x
L A
Now; x= sin
2
y Mg
y = Lcos
L/2 sin
x2 y2
1
(L / 2)2 L2
Path of A is an ellipse.
JEE-Adv-2017-P2 [Code - 9] 7
9. Two coherent monochromatic point sources S1 and S2 of wavelength = 600 nm are placed symmetrically
on either side of the center of the circle as shown. The sources are separated by a distance d = 1.8mm.
This arrangement produces interference fringes visible as alternate bright and dark spots on the
circumference of the circle. The angular separation between two consecutive bright spots is . Which
of the following options is/are correct ?
P1
P2
S1 S2
d
n
cos =
d
–sin = (n)
d
(n)
d sin
increases as decreases
At P2, the order of fringe will be maximum.
For total no. of bright fringes d = n n = 3000
total no. of fringes = 3000
JEE-Adv-2017-P2 [Code - 9] 8
10. A source of constant voltage V is connected to a resistance R and two ideal inductors L1 and L2 through
a switch S as shown. There is no mutual inductance between the two inductors. The switch S is initially
open. At t = 0, the switch is closed and current begins to flow. Which of the following options is/
are correct?
S
R
+ L1 L2
– V
(A) The ratio of the currents through L1 and L2 is fixed at all times (t > 0)
V L2
(B) After a long time, the current through L1 will be R L L
1 2
V L1
(C) After a long time, the current through L2 will be R L L
1 2
V
(D) At t = 0, the current through the resistance R is
R
Ans. (A), (B), (C)
S R
Sol. V +– L1 L2
dI1 dI
L1 L2 2
dt dt
L1I1 = L2I2
I1 L 2
I 2 L1
Current through resistor at any time t is given by
RT L1L 2
I = V/R (1 e L ) where L = L L
1 2
V
After long time I =
R
JEE-Adv-2017-P2 [Code - 9] 9
I1 + I2 = I ...(i)
L1I1 = L2I2 ...(ii)
From (i) & (ii) we get
V L2 V L1
I1 = R L L , I2
R L1 L 2
1 2
Q
P
R
X
(A) If the force is applied normal to the circumference at point X then is constant
(B) If the force is applied tangentially at point S then 0 but the wheel never climbs the step
(C) If the force is applied normal to the circumference at point P then is zero
(D) If the force is applied at point P tangentially then decreases continuously as the wheel climbs
Ans. (C)
Sol. (A) is incorrect.
R
x
JEE-Adv-2017-P2 [Code - 9] 10
if force applied tangentially at S
FR 0
but it will climb as mentioned in question.
Q
F P
If force is applied normal to surface at P then line of action of force will pass from Q & thus
= 0
(D) is incorrect.
F
2
VY = V0 sin t and
3
4
VZ = V0 sin t
3
An ideal voltmeter is configured to read rms value of the potential difference between its terminals.
It is connected between points X and Y and then between Y and Z. The reading(s) of the voltmeter
will be:-
rms
(A) VXY V0
rms 1
(B) VYZ V0
2
(C) Independent of the choice of the two terminals
rms 3
(D) VXY V0
2
Ans. (C), (D)
JEE-Adv-2017-P2 [Code - 9] 11
Sol. Potential difference between X & Y = VX – VY
Potential difference between Y & Z = VY – VZ
Phasor of the voltages :
VY
120°
120° VX
120°
VZ
VX – VY = 3V0
rms 3V0
VXY
2
rms 3V0
similarly VYZ
2
Also difference is independent of choice of two terminals.
13. A point charge +Q is placed just outside an imaginary hemispherical surface of radius R as shown
in the figure. Which of the following statements is/are correct ?
+Q
(D) The component of the electric field normal to the flat surface is constant over the surface.
Ans. (A) (B)
Sol. Every point on circumference of flat surface is at equal distance from point charge
Hence circumference is equipotential.
Flux passing through curved surface = – flux passing through flat surface.
JEE-Adv-2017-P2 [Code - 9] 12
d
r
1 Q R
(d)through the ring = E cos .dA 2
.2 rdr
4 0
2
r R 2
R r2
2
R
QR rdr q 1
d 2 1
4 0 3/2
2 0
2
0 R r
2
2
q 1
Flux through curved surface = 1
2 0 2
Note : Flux through surface can be calculated using concept of solid angle.
1
= 2(1 – cos) = 2 1
2
1
Solid angle subtended = 2 1
2
q
for 4 solid angle =
0
1 q 1
for 2 1 solid angle = .2 1
4 0 2
2
q 1
=
2 0 1
2
3R
14. A uniform magnetic field B exists in the region between x = 0 and x = (region 2 in the figure)
2
pointing normally into the plane of the paper. A particle with charge +Q and momentum p directed
along x-axis enters region 2 from region 1 at point P1(y = –R). Which of the following options(s)
is/are correct ?
JEE-Adv-2017-P2 [Code - 9] 13
y
Region 1 Region 2 Region 3
× × ×
B
× × ×
× × ×
× × ×
× × ×
O x
× × × P2
+Q P1 × × ×
(y = –R) × × ×
× × ×
3R/2
8 p
(A) For B , the particle will enter region 3 through the point P2 on x-axis
13 QR
2 p
(B) For B , the particle will re-enter region 1
3 QR
(C) For a fixed B, particle of same charge Q and same velocity v, the distance between the point
P1 and the point of re-entry into region 1 is inversely proportional to the mass of the particle.
(D) When the particle re-enters region 1 through the longest possible path in region 2, the magnitude
p
of the chage in its linear momentum between point P1 and the farthest point from y-axis is .
2
Ans. (A) (B)
13R
8
y
Sol. p2
R 3R
2
8 p
For B = , radius of path
13 QR
p p 13QR 13
R' = R
Q.B Q8p 8
5R
using pythagorous theorem, y =
8
particle will enter region 3 through point P2
2 p
for B >
3 QR
JEE-Adv-2017-P2 [Code - 9] 14
3PQR 3
Radius of path < R
Q2p 2
Particle will not enter in region 3 & will re-enter region 1
charge in momentum = 2p . When particle enters region 1 between entry point & farthest point from
y-axis.
SECTION–3 : (Maximum Marks : 12)
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions.
Each question has FOUR options (A), (B), (C) and (D) ONLY ONE of these four options is correct.
For each question, darken the bubble corresponding to the correct option in the ORS.
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If only the bubble corresponding to the correct option is darkened.
Zero Marks : 0 In all other cases.
PARAGRAPH–1
Consider a simple RC circuit as shown in figure 1.
Process 1 : In the circuit the switch S is closed at t = 0 and the capacitor is fully charged to voltage V0
(i.e., charging continues for time T >> RC). In the process some dissipation (ED) occurs across the resistance
R. The amount of energy finally stored in the fully charged capacitor is EC.
v0
Process 2 : In a different process the voltage is first set to and maintained for a charging time
3
2v 0
T >> RC. Then the voltage is raised to without discharging the capacitor and again maintained for
3
a time T >> RC. The process is repeated one more time by raising the voltage to V0 and the capacitor
is charged to the same final voltage V0 as in Process 1.
These two processes are depicted in Figure 2.
V
Process 1
V0
S 2V0/3
R Process 2
V0/3 T >> RC
V + C
–
T 2T t
Figure 1 Figure 2
15. In Process 1, the energy stored in the capacitor EC and heat dissipated across resistance ED are related
by :-
1
(A) EC = ED (B) EC = 2ED (C) EC = E (D) EC = ED ln2
2 D
Ans. (A)
JEE-Adv-2017-P2 [Code - 9] 15
R
S
C
Sol. V +–
When switch is closed for a very long time capacitor will get fully charged & charge on capacitor
will be q = CV
1
Energy stored in capacitor C CV 2 ...(i)
2
2
Work done by battery () = Vq = VCV = CV
dissipated across resistance D = (work done by battery) – (energy store)
1 1
D CV 2 CV 2 CV 2 ...(ii)
2 2
from (i) & (ii)
D C
16. In Process 2, total energy dissipated across the resistance ED is :-
11 2 1 2 1
(A) ED = CV0 (B) ED = 3 CV0 (C) ED = CV02 (D) ED = 3CV02
32 2 2
Ans. (A)
Sol. For process (1)
CV0
Charge on capacitor =
3
1 V02 CV02
energy stored in capacitor = C
2 9 18
CV0 V CV02
work done by battery =
3 3 9
CV02 CV02 CV02
Heat loss =
9 18 18
For process (2)
2CV0
Charge on capacitor =
3
CV0
Extra charge flow through battery =
3
CV0 2V0 2CV02
Work done by battery : . =
3 3 9
2
1 2V0 4CV02
Final energy store in capacitor : C
2 3 18
JEE-Adv-2017-P2 [Code - 9] 16
4CV02 CV02 3CV02
energy store in process 2 :
18 18 18
Heat loss in process (2) = work done by battery in process (2) – energy store in capacitor process
(2)
2CV0 CV0
extra charge flow through battery : CV0 –
3 3
CV0 CV02
work done by battery in this process :
0 V
3 3
1
find energy store in capacitor : CV02
2
1 4CV02 5CV02
energy stored in this process : CV02
2 18 18
1
final energy store in capacitor : CV02
2
11 2
so we can say that ED = CV0
32
PARAGRAPH -2
One twirls a circular ring (of mass M and radius R) near the tip of one's finger as shown in Figure
1. In the process the finger never loses contact with the inner rim of the ring. The finger traces out
the surface of a cone, shown by the dotted line. The radius of the path traced out by the point where
the ring and the finger is in contact is r. The finger rotates with an angular velocity 0. The rotating
ring rolls without slipping on the outside of a smaller circle described by the point where the ring
and the finger is in contact (Figure 2). The coefficient of friction between the ring and the finger is
µ and the acceleration due to gravity is g.
JEE-Adv-2017-P2 [Code - 9] 17
R
r
R
Figure 1 Figure 2
17. The total kinetic energy of the ring is :-
1 2 3 2
(A ) M20 R 2 (B) M20 R r
2
(C) M20 R r (D) M20 R r
2 2
Ans. (B)
18. The minimum value of 0 below which the ring will drop down is :-
3g g 2g 2g
(A) 2 R r (B) R r (C) R r (D) 2 R r
Ans. (B)
JEE-Adv-2017-P2 [Code - 9] 18
JEE(Advanced) – 2017 TEST PAPER WITH SOLUTION
(HELD ON SUNDAY 21st MAY, 2017)
CHEMISTRY
SECTION–I : (Maximum Marks : 21)
This section contains SEVEN questions.
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct.
For each question, darken the bubble corresponding to the correct option in the ORS.
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If only the bubble corresponding to the correct option is darkened.
Zero Marks : 0 If none of the bubbles is darkened.
Negative Marks : –1 In all other cases
19. Which of the following combination will produce H2 gas ?
(A) Zn metal and NaOH(aq) (B) Au metal and NaCN(aq) in the presence of air
(C) Cu metal and conc. HNO3 (D) Fe metal and conc. HNO3
Ans. (A)
Sol. (A) Zn + 2NaOH Na2ZnO2 + H2
(B) 4Au + 8NaCN + O2 + 2H2O 4Na[Au(CN)2] + 4NaOH
(C) Cu + 4HNO3 Cu(NO3)2 + 2NO2 + 2H2O
(conc.)
(D) Formation of passive layer of Fe2O3 on the surface of Fe and NO2 gas is evolved.
20. Pure water freezes at 273 K and 1 bar. The addition of 34.5 g of ethanol to 500 g of water changes the
freezing point of the solution. Use the freezing point depression constant of water as
–1
2 K kg mol . The figures shown below represents plots of vapour pressure (V.P.) versus temperature (T).
–1
[Molecular weight of ethanol is 46 g mol ]
Among the following, the option representing change in the freezing point is -
er
Wat 1 Water
l
1 h an o
+Et
V.P./bar
(A) (B)
er
V.P./bar
Wat
Ic
Water+Ethan
ol
1 er
Water Wat
l
(C) (D) 1 th an o
V.P./bar
er +E
V.P./bar
Ic
a t
e
W
Ic
Water+Ethanol
JEE-Adv-2017-P2 [Code - 9] 1
Sol. Ethanol should be considered non volatile as per given option
Tf = Kf × m
34.5
Tf = 2 × = 3K
46 0.5
ter
wa
0
Tf = 273K V.P. al
than
r+e
Tf = 270K wate
21. The order of the oxidation state of the phosphorus atom in H3PO2 , H3PO4 , H3PO3 and H4P2O6 is
O
P
H3PO4 HO H ; oxidation state of P = +3
OH
O
P
H3PO2 HO H ; oxidation state of P = +1
H
Hence Ans (A)
JEE-Adv-2017-P2 [Code - 9] 2
22. The standard state Gibbs free energies of formation of C(graphite) and C(diamond) at T = 298 K are
The standard state means that the pressure should be 1 bar , and substance should be pure at a given
temperature. The conversion of graphite [C(graphite)] to diamond [C(diamond)] reduces its volume by
–6 3 –1
2 × 10 m mol . If C(graphite) is converted to C(diamond) isothermally at T = 298 K, the pressure
at which C(graphite) is in equilibrium with C(diamond), is
(A) 14501 bar (B) 29001 bar (C) 58001 bar (D) 1405 bar
Ans. (A)
Sol. C(graphite) C(diamond) ; G0 = fG0diamond – fG0graphite = 2.9 kJ/mole at 1 bar
As dGT = V.dP
G 2 P2
G1
d(G T ) V.dP
P1
2.9 103 4
P2 –1 = Pa = 1.45 ×10 bar
2 10 6
P2 = 14501 bar
23. The major product of the following reaction is
OH
i) NaNO2, HCl, 0°C
ii) aq. NaOH
NH2
–
O Na+
N=N OH
(A) (B)
N2Cl
OH OH
(C) (D)
N=N Cl
JEE-Adv-2017-P2 [Code - 9] 3
Ans. (C)
OH OH
NaNO2 HCl
Sol.
0°C
NH2 N2+Cl
Diazotization reaction
aq. NaOH Diazocoupling
on phenolic
ring in basic medium
OH
N N
Para is less hindered
NH NH 2
N NH HN N
H3C NH2 H2N NH
I II III IV
(A) II > I > IV > III (B) IV > II > III > I
(C) I > IV > III > II (D) IV > I > II > III
Ans. (D) IV > I > II > III
Sol. Basic strength stability of conjugated acid.
+ M / +H / +I
(I)
+
N N–H H
(II) H–N N–H H–N N–H
+M 2 eq. RS
JEE-Adv-2017-P2 [Code - 9] 4
–I
+
(III) H–N N H
H–N N–H H–N N–H
+M
+
NH NH2 NH2
C + C C
(IV) H2N NH2 H H2N NH2 H2N NH2
+
+M +M
NH2
C
H2N NH2
+
Conjugated acid stabilized by 3 equivalent R.S.
25. For the following cell :
Zn(s) | ZnSO4 (aq.) || CuSO4 (aq.) | Cu(s)
2+ 2+
when the concentration of Zn is 10 times the concentration of Cu , the expression for G
–1
( in J mol ) is
[F is Faraday constant , R is gas constant, T is temperature , Eº(cell) = 1.1V]
(A) 2.303 RT + 1.1F (B) 2.303 RT – 2.2F
(C) 1.1 F (D) –2.2 F
Ans. (B)
0
Sol. G = G + 2.303RT logQ
0
G = – nFE + 2.303RT logQ
Given : Eº = 1.1 V and n = 2
[Zn 2 ]
G = (– 2 × 1.1 × F) + 2.303RT log [
Cu 2 ]
G = –2.2 F + 2.303RT
JEE-Adv-2017-P2 [Code - 9] 5
SECTION–2 : (Maximum Marks : 28)
This section contains SEVEN questions.
Each question has FOUR options (A), (B), (C) and (D). ONE OR MORE THAN ONE of these four
options is (are) correct.
For each question, darken the bubble(s) corresponding to all the correct option(s) in the ORS
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the bubble(s) corresponding to all the correct option(s) is (are)
darkened.
Partial Marks : +1 For darkening a bubble corresponding to each correct option,
Provided NO incorrect option is darkened.
Zero Marks : 0 If none of the bubbles is darkened.
Negative Marks : –2 In all other cases.
for example, if (A), (C) and (D) are all the correct options for a question, darkening all these three will
get +4 marks; darkening only (A) and (D) will get +2 marks; and darkening (A) and (B) will get –2 marks,
as a wrong option is also darkened
26. In a bimolecular reaction, the steric factor P was experimentally determined to be 4.5. The correct option(s)
among the following is(are):
(A) The value of frequency factor predicted by Arrhenius equation is higher than that determined experimentally
(B) The activation energy of the reaction is unaffected by the value of the steric factor
(C) Since P = 4.5, the reaction will not proceed unless an effective catalyst is used.
(D) Experimentally determined value of frequency factor is higher than that predicted by Arrhenius equation.
Ans. (B,D)
Sol. K = P.A. e Ea / RT
(A) If P < 1 Aarr. > Aexpt
(D) If P > 1 Aarr. < Aexpt
(C) If P is very small, then catalyst is required to carry out the reaction at measurable rate.
27. Compound P and R upon ozonolysis produce Q and S, respectively. The molecular formula of Q and
S is C8H8O. Q undergoes Cannizzaro reaction but not haloform reaction, whereas S undergoes haloform
reaction but not Cannizzaro reaction.
(i) P Q
(C8H8O)
(ii) R S
(C8H8O)
JEE-Adv-2017-P2 [Code - 9] 6
The option(s) with suitable combination of P and R, respectively, is(are)
(A) and
(B) and
(C) and
(D) and
Ans. (A,C)
O
i) O3/ CH2Cl2
Sol. (A) CH3 CH3 CHO + H – C – H
ii) Zn/H 2O
Q
P give cannizzaro reaction
but no haloform
O O
i) O3/ CH2Cl2
+H–C–H
ii) Zn/H 2O
CH3 S CH 3
R no cannizzaro
but give haloform
CH3 O
(C) i) O3/ CH2Cl2
ii) Zn/H2 O + CH3CH = O
CH3 P CH3 Q
give cannizzaro reaction
but no haloform
O
O
i) O3/ CH2Cl2
+ CH3 – C – CH3
ii) Zn/H2O
CH3 S CH 3
R no cannizzaro
but give haloform
JEE-Adv-2017-P2 [Code - 9] 7
28. For a reaction taking place in a container in equilibrium with its surroundings, the effect of temperature
on its equilibrium constant K in terms of change in entropy is described by
(A) With increase in temperature, the value of K for exothermic reaction decreases because the entropy
change of the system is positive
(B) With increase in temperature, the value of K for endothermic reaction increases because unfavourable
change in entropy of the surroundings decreases
(C) With increase in temperature, the value of K for exothermic reaction decreases because favourable
change in entropy of the surroundings decreases
(D) With increase in temperature, the value of K for endothermic reaction increases because the entropy
change of the system negative
Ans. (BC)
q process
Sol. Ssurr. =
Tsurr.
JEE-Adv-2017-P2 [Code - 9] 8
Ans. (ACD)
Sol. (A)
(B)
(C)
(D) Lewis acidic strength decreases down the group. The decrease in acid strength occurs because as
size increases, the attraction between the incoming electron pair and the nucleus weakens.
Hence Lewis acidic strength of BCl3 is more than AlCl3.
31. The correct statement(s) about surface properties is (are)
(A) Cloud is an emulsion type of colloid in which liquid is dispersed phase and gas is dispersion medium
(B) Adsorption is accompanied by decrease in enthalpy and decrease in entropy of the system.
(C) Brownian motion of colloidal particles does not depend on the size of the particles but depends on
viscosity of the solution.
(D) The critical temperatures of ethane and nitrogen and 563 K and 126 K, respectively. The adsorption
of ethane will be more than that of nitrogen on same amount of activated charcoal at a given temperature.
Ans. (B,D)
Sol. (A) Emulsion is liquid in liquid type colloid.
(B) For adsorption, H < 0 & S < 0
(C) Smaller the size and less viscous the dispersion medium, more will be the brownian motion.
(D) Higher the TC , greater will be the extent of adsorption.
32. For the following compounds, the correct statement(s) with respect of nucleophilic substitution reactions
is(are);
Br
JEE-Adv-2017-P2 [Code - 9] 9
CH3 CH3
CH2–Br CH2–Br Br
Sol. CH3 – C – Br
CH3
CH3 CH3
H Nu Nu
2
Br SN H
(inverted product)
CH3 CH3 CH3
H Nu Nu H
SN
1 +
Br H Nu
(inverted product) (retained product)
JEE-Adv-2017-P2 [Code - 9] 10
Solution for paragraph Q.33 & 34
2KClO3 2KCl +
JEE-Adv-2017-P2 [Code - 9] 11
36. The product S is -
HO3S
(H3C)3C O CH3 H3COC
(H3C)3C H3C CH3
(A) (B)
COCH3
H3C CH3
COCH3 (H3C)3C
(H3C)3C CH3
(C) (D)
COCH3
Solution for paragraph Q.35 & 36
35. Ans.(B)
OH
Sol. COOEt (1) excess H2SO4/0°C
of MeMgCl
(2) H2O Friedal Craft
Alkylation + Dehydration
O
(1) Me–C–Cl / AlCl 3 in CH2Cl 2
(2) H2 O
Friedal Craft
Acylation
C–Me
O
36. Ans.(D)
OH
Sol. COOEt (1) excess H2SO4/0°C
of MeMgCl
(2) H 2O Friedal Craft's
Alkylation + Dehydration
O
(1) Me–C–Cl / AlCl 3 in CH 2Cl 2
C–Me
O
(S)
JEE-Adv-2017-P2 [Code - 9] 12