Beruflich Dokumente
Kultur Dokumente
Arctic
For high load, high speed environments in cold temperature environments NLGI Grade 0.5
Corrosion Protection—Resists oxidation and protects metal against rust. Will not
corrode or damage steel, copper bearing alloys or conventional seal materials.
Cat® Extreme Application Grease – Arctic
Grease Selection Guide
Cat Extreme Application Grease 1 Cat Extreme Application Grease - Desert Cat Prime Application Grease Cat Ball Bearing Grease
NLGI 1 NLGI 2 NLGI 2 NLGI 2
(-20 to 140ºC / -4 to 284ºF) (-10º to 140ºC / +14ºF to 284ºF) (-20 to 140ºC / -4 to 284ºF) (-20º to 160ºC / -4º to 320ºF)
With 5% Moly With 5% Moly With 3% Moly Without Moly
Cat Extreme Application Grease 2 Cat Extreme Application Grease - Arctic Cat Utility Grease
NLGI 2 NLGI 0.5 NLGI 2
(-15 to 140ºC / +5 to 284ºF) (-50º to 130ºC / -58º to 266ºF) (-20 to 140ºC / -4 to 284ºF)
With 5% Moly With 5% Moly Without Moly
Working High Load & Med Load & Low Load & Low Load &
High Temp Low Temp
Environment High Speed Med Speed Low Speed High Speed
Typical Properties
NLGI 0.5 Recommended Use
Color Gray Black Cat Extreme Application Grease – Arctic
Molybdenum Disulfide, % 5 is recommended for grease fittings and
lubrication points in all load and speed
Operating Temperature Range, °C -50 to +130
applications at operating temperatures
Operating Temperature Range, °F -58 to +266 range from -50°C to +130°C
Base Oil Type Semi-synthetic (-58°F to +266°F).
ASTM D445 Base Oil Viscosity 40°C, mm²/s 60
Thickener Type Lithium Complex
Health and Safety
ASTM D2265 Dropping point, °C 230 For information on proper use for health,
safety and environment, please refer to
ASTM D2596 4 Ball weld load, kg 400
the Material Safety Data Sheet (MSDS).
ASTM D1743 Rust prevention Pass Read and understand the MSDS before
ASTM D4048 Copper corrosion 1A using this product. Always observe good
Low starting/running torque, (-40°C), g cm 1000/230 hygiene measures. For a copy of the
The values shown are typical values and should not be used as quality control parameters to either accept or reject product. MSDS, contact us or visit the web at
Specifications are subject to change without notice. www.catmsds.com.
PEHJ0407
www.cat.com