Beruflich Dokumente
Kultur Dokumente
Ensure that select switches are set as above > set view to Ctrl 4 and shift 2.
Pick the top bolt first – this procedure will create 2 separate diagonal wires
Create 2 points at each end of the PJR (in this example 90mm from each end) pick the PJR first then
pick the column and finally pick the point created earlier.
The default application for this component will apply a single Metlcon cleat but this can be altered to
a flat in the dialog box as shown below.
Panel Joint Rail at Mid-Span (21)
Model the PJR vertical members to the required lengths and in the correct plan locations at mid-
span or at a specified plan position.
Select the horizontal rail as the main part first, then select the PJR and finally middle click and the
component will apply the correct cleats and bolts to suit the locations chosen.