Beruflich Dokumente
Kultur Dokumente
MATERIAL NOTE:
.18 Flanges - SA-105
Pipe - SA-106 GR. B
Couplings - SA-105
6
36.00
6.00 NOTES:
15.00 Max
1. All dimensions in inches.
2. All welds shall be neat in appearance, free from slag and other defects.
30.00 N3 3. Vessel to be cleaned of scale, oil,weld spatter and all other foreign material,
6.00
21.00 prior to hydrostatic test.
.25 4. Remove all sharp edges on nozzles (1/8" minimum radius)
5. All nozzles to support nominal loads only.
.25 1 36.38 6. Maximum misalignment of butt joints is limited to .25T (Category A, B, C, D
Typ up to 1/2" thick)
.25
3 7. All couplings to conform to B16.11 (2011 Add.) standards.
9.50 VERTICAL ORIENTATION 8. All flanges to conform to B16.5 (2009 Add.)/ B16.47 standards.
4
TYP
5 .50 A WITH SUPPORT SKIRT 9. Flange bolt holes to straddle natural centre lines.
38.00 to 86.00 5.00 (CLIPS AS REQUIRED) 10. See Separation Table for minimum distance to seam.
31.18 7 11. See Separation Table for minimum distance between nozzles.
SECTION A-A .88
CRN: TBA
2.50 33.00 to 81.00
DESIGN DATA
3.09 Design Code:
Code ASME VIII-1 2010 ed. 2011 add.
Seismic Code: NBC Canada 2005
SEPARATION TABLE Wind Code: NBC Canada 2005
Coupling Pipe 25.00 Design Conditions MAWP - Int / Ext: 200/0 psi @ 250°F
Seam MDMT: -20°F @ 200 psi
Size 1 1 1/2 2 2 1/2 2 1/2 3 4 6 R20.44
Corrosion Allowance: 0 in
1 2.250 2.688 3.063 3.625 3.000 3.500 4.250 5.875 1.125
Coupling
4" A/R STD Inlet UW-16.1 (c) .250 - - - 3.00 RFSO 150 .362 .237 .332 Typ.
N1 Typ.
3" A/R STD Inlet UW-16.1 (c) .250 - - - 3.00 RFSO 150 .341 .216 .303 Outside
Outside F2 Pressure Vessel Engineering, Ltd. www.pveng.com
2.50" A/R STD Inlet UW-16.1 (c)
UW-16.2 L
.250 - - - 3.00 RFSO 150 .328 .203 .285
SB
F1
Eng 120 Randall Drive, Suite B
Waterloo, Ontario, Canada
info@pveng.com
Tel. 519-880-9808
2.50" A/R 3000 Service .250 - - - - - - - - - Typ. Long Seam N2V 1C6 Fax 519-880-9810
Coupling Typ. Circ. Seam Slip On Flange
Title
UW-16.2 L
2" A/R 3000 Service .313 - - - - - - - - -
Coupling
N2
1.50" A/R 3000 Service
UW-16.2 L
Coupling
.313 - - - - - - - - -
Coupling Hole 41 41
Generic Vessel
41
Nozzle