PSN COLLEGE OF ENGINEERING ANDTECHNOLOGY d) Damping
(Autonomous) e) Energy method
INTERNAL I f) Newton’s method Degree/Branch: BE-AERONAUTICAL Year/Sem: IV/VII g) Magnetic effects on source of excitation Subject Code/Name: 201024-VIBRATIONS AND AEROELASTICITY h) Thermal effects on source of excitation Regulation: 2014 Date: 02/07/18 Time: 1.30 Hours Max. Marks: 50 Answer ALL Questions 8. a Name some vibration measuring instruments. Explain any 2 with PART-A (05 x 2 = 10 Marks) suitable diagram. (16) 1 What is degree of freedom? Give example OR 2 Name four types of damping used in mechanical systems. i. Find the natural frequency of the system as shown in the Find out the frequency of S-M system having mass of 6kg and figure. K=2×105 N/m, m=20 kg (8) 3 stiffness of 3000N/m. 4 State D’Alembert’s principle. 5 What is logarithmic decrement? PART – B (1 x 08 = 8 Mark) 6. a Derive expression for the natural frequency of a simple pendulum considering the mass of the spring using energy method. OR The damper offers resistance of 0.05N at constant velocity 0.04m/s. The damper is used with the spring having stiffness (k) b ii. Determine the natural frequency using energy method.(8) b 9N/m. Determine the damping frequency of the system, when the mass of the S-M 0.1kg. Find the damping ratio, logarithmic decrement, time period of damped vibration. PART – C (2 x 16= 32 Marks) From the equation of motion of the S-M system, derive the 7. a expression for the solution of over damped, critically damped and under damped vibrations in terms of damping factor. OR Write note on the following terms: a) Free vibration and forced vibration b b) Periodic motion and simple harmonic motion c) Resonance 2 0.04m/s. The damper is used with the spring having stiffness (k) 9N/m. Determine the damping frequency of the system, when the mass of the S-M 0.1kg. Find the damping ratio, logarithmic decrement, time period of damped vibration. PART – C (2 x 16= 32 Marks) From the equation of motion of the S-M system, derive the 7. a expression for the solution of over damped, critically damped and under damped vibrations in terms of damping factor. OR Write note on the following terms: a) Free vibration and forced vibration b) Periodic motion and simple harmonic motion c) Resonance
PSN COLLEGE OF ENGINEERING ANDTECHNOLOGY b d) Damping
(Autonomous) e) Energy method INTERNAL I f) Newton’s method Degree/Branch: BE-AERONAUTICAL Year/Sem: IV/VII g) Magnetic effects on source of excitation Subject Code/Name: 201024-VIBRATIONS AND AEROELASTICITY h) Thermal effects on source of excitation Regulation: 2014 Date: Time: 1.30 Hours Max. Marks: 50 Answer ALL Questions 8. a Name some vibration measuring instruments. Explain any 2 with PART-A (05 x 2 = 10 Marks) suitable diagram. 1 What is degree of freedom? Give example OR 2 Name four types of damping used in mechanical systems. i. Find the natural frequency of the system as shown in the b Find out the frequency of S-M system having mass of 6kg and figure. K=2×105 N/m, m=20 kg 3 stiffness of 3000N/m. 4 State D’Alembert’s principle. 5 What is logarithmic decrement? PART – B (1 x 08 = 8 Mark) 6. a Derive expression for the natural frequency of a simple pendulum considering the mass of the spring using energy method. OR b The damper offers resistance of 0.05N at constant velocity
2 ii. Determine the natural frequency using energy method.
Electrolysis Plant Size Optimization and Benefit Analysis of A Far Offshore Wind-Hydrogen System Based On Information Gap Decision Theory and Chance Constraints Programming