Beruflich Dokumente
Kultur Dokumente
Technical specifications
New Gen
Driveaway Antennas
NewGen Drive-Aways
Technical specifications
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-75V
Technical specifications
The iNetVu® Ka-75V Drive-Away Antenna is a 75 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
“Authorized for use on ViaSat Exede® Enterprise and on KA-SAT NEWSSPOTTER NEWSGATHERING service by Eutelsat”
Features
Application Versatility
If you operate in Ka-band, the Ka-75V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation mobile Ka terminal delivers affordable broadband
Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-75V
Technical specifications
Mechanical RF Interface
Reflector 75cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base Connector
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 90º Mounting Plate L: 131 cm (51.6”)
Polarization Circular, Auto-switching W: 45 cm (17.7”)
Elevation Deploy Speed Variable , 10º/sec typ. Stowed Reflector Ext. Dims L: 145 cm (57”)
Azimuth Deploy Speed Variable 5º/sec typ. W: 76 cm (29.9”)
Peaking Speed 0.1º/sec H: 29 cm (11.5”)
Deployed Height 122 cm (48”)
Platform Weight 52 kg (115 lbs)
Environmental
Survival Motors
Wind Deployed 160 km/h (100 mph)
Wind Stowed 225 km/h (140 mph) Electrical Interface 24VDC 8 Amp (Max.)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational
Wind 72 km/h (45 mph) Shipping Weights & Dimensions*
Temperature -30ºC to 55ºC (-22°F to 130°F)
Crate: 183 cm x 109 cm x 66 cm (72” x 43” x 26”), 52 kg (114 lbs)
Platform: 52 kg (115 lbs)
Thermal Test per MIL-STD-810F, Method 501.4/502.4, High/Low Temperatures
7024C Controller: 6 kg (13 lbs)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked Cables: 5 kg (11 lbs)
Shock Test per IEC 60068-2-27, Appendix A
Total weight: 115 kg (253 lbs)
Receive Transmit
Frequency (GHz) 18.30 - 20.20 28.10 - 30.00
Feed Interface (Circular) RG6 RG6
Nominal G/T 17.5 dB/K
Nominal EIRP 48.4 dBWi
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
981
Technical specifications
The iNetVu® 981 Drive-Away Antenna is a 98 cm Ku-band auto-acquire satellite antenna system which can be mounted on the roof of a vehicle
for direct broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite
acquisition within minutes, anytime anywhere.
Features
Field Upgradable to Ka-98H or Ka-98G
• One-Piece high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm capable of supporting up to 5kg (10 lbs)
RF Electronics (LNB & BUC)
• Designed to work with the iNetVu® 7024C Controller
• Works seamlessly with the world’s most popular commercially
available Ku modems and services
• Field upgradable to Ka-band
• 3 Axis motorization
• Supports manual control when desired
• One button, auto-pointing controller acquires any Ku-band
satellite within 2 minutes
• Locates satellites using the most advanced satellite acquisition
methods
• Based on Skyware Global 98 cm reflector with cross-pol feed
• Uses long focal length feed for low cross-pol performance
• Available with pod option
• Standard 2 year warranty
Application Versatility
If you operate in Ku-band, the 981 system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. The system is also field upgradable to Ka-band. Ideally suited for industries
such as Oil & Gas Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and
many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
981
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type / N Type (optional)
Deployment Sensors GPS antenna Axis transition Twist-Flex Waveguide
Compass ± 2º
Tilt sensor ± 0.1º
Physical
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 90º Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Elevation Deploy Speed Variable 2º/sec typ. Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ. (without reflector pod) H: 29 cm (11.5”)
Peaking Speed 0.1º/sec Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
(with reflector pod) H: 29 cm (11.5”)
Deployed Height 151 cm (59.5”)
Environmental Platform Weight 54 kg (119 lbs)
Reflector back cover 2.27 kg (5 lbs)
Survival Pod alone 6.8 kg (15 lbs)
Wind Deployed 160 km/h (100 mph) Total Platform Weight 56.3 kg (124 lbs)
Wind Stowed 225 km/h (140 mph) (without reflector pod)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Platform Weight 63 kg (139 lbs)
Operational (with reflector pod)
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked Electrical Interface 24VDC 8 Amp (Max.)
Shock Test per IEC 60068-2-27
Note:
(1)
LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-98G
Technical specifications
The iNetVu® Ka-98G Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
Features
Application Versatility
If you operate in Ka-band, the Ka-98G system is easily configured to provide instant access to satellite communications for any application
that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-98G
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base
Deployment Sensors GPS antenna Connector
Compass ± 2º
Tilt sensor ± 0.1º
Azimuth Full 360º in overlapping 200º sectors Physical
Elevation 0 - 90º
Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Polarization LHCP/RHCP (Motorized Option Available)
Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Elevation Deploy Speed Variable 2º/sec typ.
(without reflector pod) H: 29 cm (11.5”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ.
Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
Peaking Speed 0.1º/sec
(with reflector pod) H: 29 cm (11.5”)
Deployed Height 151 cm (59.5”)
Platform Weight 54 kg (119 lbs)
Environmental Reflector back cover 2.27 kg (5 lbs)
Survival Pod alone 6.8 kg (15 lbs)
Wind Deployed 160 km/h (100 mph) Total Platform Weight 56.3 kg (124 lbs)
Wind Stowed 225 km/h (140 mph) (without reflector pod)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Platform Weight 63 kg (139 lbs)
Operational (with reflector pod)
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures Electrical Interface 24VDC 8 Amp (Max.)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27
Shipping Weights & Dimensions*
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-98V
Technical specifications
The iNetVu® Ka-98V Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
Features
Application Versatility
If you operate in Ka-band, the Ka-98V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation mobile Ka terminal delivers affordable broadband
Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-98V
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base
Deployment Sensors GPS antenna Connector
Compass ± 2º
Tilt sensor ± 0.1º
Azimuth Full 360º in overlapping 200º sectors Physical
Elevation 0 - 90º
Elevation Deploy Speed Variable 2º/sec typ. Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ. Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Peaking Speed 0.1º/sec (without reflector pod) H: 29 cm (11.5”)
Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
(with reflector pod) H: 29 cm (11.5”)
Deployed Height 151 cm (59.5”)
Environmental Platform Weight 54 kg (119 lbs)
Survival Reflector back cover 2.27 kg (5 lbs)
Wind Deployed 160 km/h (100 mph) Pod alone 6.8 kg (15 lbs)
Wind Stowed 225 km/h (140 mph) Total Platform Weight 56.3 kg (124 lbs)
Temperature -40ºC to 65ºC (-40°F to 150°F) (without reflector pod)
Operational Total Platform Weight 63 kg (139 lbs)
Wind 72 km/h (45 mph) (with reflector pod)
Temperature -30ºC to 55ºC (-22°F to 130°F)
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-98H
Technical specifications
The iNetVu® Ka-98H Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7024C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
Features
“Suitable to operate over the Yahsat’s Yahclick network”
• One-Piece high surface accuracy, offset feed, steel reflector
• Heavy duty feed arm capable of supporting up to 5kg
(10 lbs) RF Electronics (LNB & BUC) or transceiver
• Designed to work with the iNetVu® 7024C Controller
• Works seamlessly with the world’s most popular
commercially available Ka modems and services
• 2 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires any Ka-band
satellite within 2 minutes
• Field upgradable to Ku-band
• Locates satellites using the most advanced satellite
acquisition methods
• Supports Skyware Global 98 cm Ka antenna
• Works with HNS Spaceway (NA)(1), YAHSAT (MENA)(1) and
Avanti (Europe)(1)
• Available with pod option
• Standard 2 year warranty
Application Versatility
If you operate in Ka-band, the Ka-98H system is easily configured to provide instant access to satellite communications for any application
that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
(1)
Uses Spaceway Radio
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Ka-98H
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, Offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from Transceiver to Base
Deployment Sensors GPS antenna Connector
Compass ± 2º
Tilt sensor ± 0.1 Physical
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 90º Mounting Plate L: 161 cm (63.5”) W: 45 cm (17.7”)
Elevation Deploy Speed Variable 2º/sec typ. Stowed Reflector Ext. Dims L: 164.8 cm (64.9”) W: 100 cm (39.5”)
Azimuth Deploy Speed Variable 15º/sec Max.,10º/sec typ. (without reflector pod) H: 29 cm (11.5”)
Peaking Speed 0.1º/sec Stowed Reflector Ext. Dims L: 178.8 cm (70.4”) W: 113 cm (44.5”)
(with reflector pod) H: 29 cm (11.5”)
Deployed Height 151 cm (59.5”)
Platform Weight 54 kg (119 lbs)
Environmental Reflector back cover 2.27 kg (5 lbs)
Survival Pod alone 6.8 kg (15 lbs)
Wind Deployed 160 km/h (100 mph) Total Platform Weight 56.3 kg (124 lbs)
Wind Stowed 225 km/h (140 mph) (without reflector pod)
Temperature -40ºC to 65ºC (-40°F to 150°F) Total Platform Weight 63 kg (139 lbs)
Operational (with reflector pod)
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F)
Motors
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures
Electrical Interface 24VDC 8 Amp (Max.)
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27
Shipping Weights & Dimensions*
Electrical Crate: 183 cm x 109 cm x 66 cm (72” x 43” x 26”), 52 kg (115 lbs)
Rx & Tx Cables 2 RG6 cables - 10 m (33 ft) each Platform: 54 kg (119 lbs)
Control Cables 7024C Controller: 6 kg (13 lbs)
Cables: 5 kg (11 lbs)
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Total weight: 117 kg (258 lbs)
Receive Transmit Transportable Case Option:
Frequency (GHz) 19.20 - 20.20 29.50 - 30.00 Base Case: 183 cm x 109 cm x 47 cm (72” x 43” x 18.5”), 133.5 kg (294 lbs)
Feed Interface (Circular) RG6 RG6
* The shipping weights/dims can vary for particular shipments depending on actual
Midband Gain (± 0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75GHz system configuration, quantity, packaging materials and special requirements
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope, Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -24 dB > -22 dB
VSWR 1.3:1
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1201
Technical specifications
The iNetVu® 1201 Drive-Away antenna system is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a
vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All
three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and the iNetVu® 7024C Controller
to ensure excellent pointing accuracy.
Features
Application Versatility
The 1201 drive-away system is easily configured to provide instant access to satellite communications for any application that requires reliable
and/or remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up typically for industries such
as SNG, Disaster Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1201
Technical specifications
Mechanical Physical
Reflector Size & Material 1.2m Glass fibre reinforced polyester (1) Stowed dimensions L: 203 cm (79.9”) W: 124 cm (48.8”)
Platform Geometry Elevation over Azimuth (without pod) H: 34 cm (13.4”)
Offset Angle 16.97º Stowed Dimensions L: 225 cm (88.5”) W: 135 cm (53.2”)
Antenna Optics One-piece offset feed, prime focus (with pod) H: 34 cm (13.4”)
Azimuth Travel ± 180º Reflector Weight 16 kg (35.2 lbs)
Elevation Look Angle 0º to 90º (including back cover)
Polarization Travel ± 95º Total Platform Weight 82 kg (180 lbs)
Elevation Deploy Speed 2º/sec (without pod)
Azimuth Deploy Speed 6º/sec Total Platform Weight 88 kg (193 lbs)
Peaking Speed 0.2º/sec (with pod)
Motor Voltage 24 VDC 10 Amp (Max.)
Ku (Linear)
Transmit Power 1 to 200 watt (2)
Environmental
Feed 2 Port XPol
Wind loading Receive Transmit
Operational 75 km/h (46.5 mph) Frequency (GHz) 10.70 - 12.75 (3) 13.75 - 14.50
Survival Feed Interface WR75 WR75
Deployed 112 km/h (70 mph) Midband Gain Co-Pol (± 0.2dBi) 41.80 43.30
Stowed 160 km/h (100 mph) Antenna Noise Temp. (K ) 10º EL = 45 / 30º EL = 24
Temperature Sidelobe Envelope, Co-Pol (dBi)
Operational -30º to 55º C (-22º to 131º F) 1.5º<Θ<20º 29-25 Log Θ
Survival -40º to 65º C (-40º to 149º F) 20º<Θ<26.3º -3.5
Solar Radiation 360 BTU/h/sq. ft. 26.3º<Θ<48º 32-25 Log Θ
Rain 1.3 cm/h (0.51 in/h) 48º<Θ<180º -10 (Typical)
Humidity 0-100% (condensing) Cross-Polarization on Axis > 35 dB
Within 1dB Beamwidth > 30 dB
Thermal Test per MIL-STD-810F, Method 501.4, High/Low Temperatures Tx/Rx Isolation > 40 dB 90 dB
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked VSWR 1.3:1 1.3:1
Shock Test per IEC 60068-2-27
Shipping Weights & Dimensions*
Electrical Platform Crated: 211 cm x 41 cm x 61 cm (83” x 16” x 24”), 121 kg (267 lbs)
Reflector Crate: 142 cm x 15 cm x 130 cm (56” x 6” x 51”), 22 kg (48 lbs)
Rx & Tx Cables 2 RG6 Cables - 10 m (33 ft) each Pod: 160 cm x 15 cm x 140 cm (63” x 6” x 55”,) 12kg (27 lbs)
Control Cables
Total Weight without pod: 143 kg (315 lbs )
Standard 10 m (33 ft) Extension Cable Total Weight with pod: 155 kg (342 lbs)
Optional Up to 30 m (100 ft) available
Transportable Case Options:
RF Interface Platform: 211 cm x 65 cm x 45 cm (83” x 25.75” x 17.75”)132 kg (290 lbs)
Radio Mounting Feed arm/Inside vehicle Reflector: 1- piece:
127 cm x 122 cm x 20 cm (50” x 48’’ x 8”), 45.5 kg (100 lbs)
Coaxial RG6U F Type
Reflector: 2- piece: (Optional)
N Type (optional)
132 cm x 31 cm x 76 cm (52” x 12’’ x 30’’), 34 kg (74 lbs)
Axis transition Twist-Flex Waveguide
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Notes:
(1)
Antenna based on Skyware, Model 125
(2)
Depending on size and weight for feed arm mounting limitation,
Eutelsat Characterized up to 40 watt BUC with Tx XPD >25 dB within 1 dB Contour
(3)
LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Technical specifications
Classic
Driveaways
Classic Drive-Aways
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
NewGen Drive-Aways
Technical specifications
1500 1800+
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
750
Technical specifications
The iNetVu® 750 Drive-Away Antenna is a 75 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
Features
Application Versatility
If you operate in Ku-band, the 750 system is easily configured to provide instant access to satellite communications for any application that requires
reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military Communications,
Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
750
Technical specifications
Mechanical RF Interface
Reflector 75 cm Elliptical Antenna (1)
Radio Mounting Feed Arm
Platform Geometry Elevation Over Azimuth Waveguide WR75 Rigid + Flex
Polarization Reflector rotation cross-pol isolation Coaxial RG6U from Feedhorn to base Connector
GPS antenna Feed 2 ports
Deployment Sensors Compass ± 2º
Tilt sensor ± 0.2º
Azimuth Full 360º in overlapping 200º sectors Physical
Elevation
Polarization
0 - 65º
±70º
Mounting Plate L: 127 cm (50”)
W: 45.7 cm (18”)
Elevation Deploy Speed Variable 5º/sec typ. Stowed Reflector Ext. Dims L: 104 cm (41”)
Azimuth Deploy Speed Variable 15º/sec Max., 10º/sec typ. W: 92.7 cm (36.5”)
Peaking Speed 0.2º/sec H: 46.3 cm (18.25”)
VSWR 1.3:1 Max. Deployed Height 116 cm (45.5”)
Platform Weight 60 kg (132 lbs)
Environmental
Survival Motors
Wind Deployed 160 km/h (100 mph) Electrical Interface 12VDC 15 Amp (Max.)
Wind Stowed 225 km/h (140 mph)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational
Shipping Weights & Dimensions*
Wind 72 km/h (45 mph)
Temperature -30ºC to 55ºC (-22°F to 130°F) Crate: 163 cm x 107 cm x 72 cm (64” x 42” x 28”), 43 kg (94lbs)
Platform: 60 kg (132 lbs)
7024C Controller: 6 kg (13 lbs)
Electrical Cables: 5 kg (11lbs)
Rx & Tx cable 2 RG6 cables - 9.1m (30 ft) each Transportable Case includes Platform: (Optional)
Control cables 157 cm x 110 cm x 46 cm (62” x 43” x 18”), 110 kg (240 lbs)
Standard: 9.1 m (30 ft) Ext. Cable
Optional: up to 60 m (200 ft) available *The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Transmit Power (2) 1 to 200 Watt (Ku-band)
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
980
Technical specifications
The iNetVu® 980 Drive-Away Antenna is a 98 cm auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
Features
Application Versatility
If you operate in Ku-band, the 980 system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
980
Technical specifications
Mechanical RF Interface
Reflector 98 cm Prime focus, offset feed (1) Radio Mounting Feed Arm / Rear of Base /Inside Vehicle
Platform Geometry Elevation over Azimuth Axis Transition Twist-Flex Waveguide
Polarization Reflector rotation cross-pol isolation Waveguide WR75 Cover Flange Interface
GPS antenna Coaxial RG6U from Feedhorn to Base Connector
Deployment Sensors Compass ± 2º European/Eutelsat Feed Prodelin Model 1985 Based (2 Port - X Pol)
Tilt sensor ± 0.2º Standard Feed Prodelin Model 1984 Based (2 Port - X Pol)
Azimuth Full 360º in overlapping 200º sectors
Elevation 0 - 65º
Polarization ±70º Physical
Elevation Deploy Speed Variable 5º/sec typ.
Azimuth Deploy Speed Variable 15º/sec Max., 10º/ sec typ. Mounting Plate L: 127 cm (50”)
Peaking Speed 0.2º/sec W: 46 cm (18”)
Stowed Reflector Ext. Dims L: 155 cm (61”)
W: 100 cm (39.5”)
H: 46 cm (18.3”)
Environmental Deployed Height 132 cm (52”)
Reflector Assembly Weight 13.7 kg (30 lbs)
Survival Platform Weight 51.3 kg (113 lbs)
Wind Deployed 160 km/h (100 mph) Total Weight 65 kg (143 lbs)
Wind Stowed 225 km/h (140 mph)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational
Wind 72 km/h (45 mph) Motors
Temperature -30ºC to 55ºC (-22°F to 130°F)
Electrical Interface 12VDC 15 Amp (Max.)
Electrical
Shipping Weights & Dimensions*
Rx & Tx cable 2 RG6 cables - 9.1m (30 ft) each
Control cables: Empty Crate: 163 cm x 107 cm x 72 cm (64” x 42” x 28”), 54 kg (119 lbs)
Standard 9.1m (30 ft) Ext. Cable Platform: 65 kg (143 lbs)
Optional up to 60 m (200 ft) available 7024C Controller: 6 kg (13 lbs)
Transmit Power (2) 1 to 200 Watt (Ku-band) Cables: 5 kg (11lbs)
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1200
Technical specifications
The iNetVu® 1200 Drive-Away Antenna is a 1.2m auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
Features
Application Versatility
If you operate in Ku-band, the 1200 system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1200
Technical specifications
Mechanical Physical
Reflector 1.2m Prime Focus, Offset Feed, SMC (1) Mounting Plate L: 132 cm (52”) W: 56 cm (22”)
Platform Geometry Elevation Over Azimuth Stowed Reflector Ext. Dims L: 177 cm (69.75”) W: 123 cm (48.6”)
Deployment Sensors GPS antenna H: 49 cm (19.25”)
Compass ± 2º D eployed Height 168 cm (66”)
Tilt sensor ± 0.1º Reflector Weight 15.9 kg (35 lbs)
Azimuth Full 360º in overlapping 200º sectors Total Weight w/Reflector 92.5 kg (204 lbs)
Elevation 0 - 78º (2)
Polarization ±90º RF Interface
Elevation Deploy Speed Variable 2º/sec typ.
Radio Mounting Feed Arm / Rear of Base / Inside Vehicle
Azimuth Deploy Speed Variable 15º/sec Max., 10º/sec typ.
Axis Transition Twist-Flex Waveguide
Peaking Speed 0.2º/sec
Waveguide WR75 Cover Flange Interface
Coaxial RG6U from Feed Arm to Base
Electrical Feed 2 port Xpol
Rx & Tx cable 2 RG6 cables - 9.1m (30 ft) each Motors
Control cables
Standard: 9.1 m (30 ft) Ext. Cable with MIL Connectors Electrical Interface 12VDC 15 Amp (Max.)
Optional: up to 60 m (200 ft) available
Shipping Weights & Dimensions*
Ku-band (Linear) X-band (Circular)
Transmit Power (3) 1 to 200 Watt 1 to 40 Watt Platform Crate: 168 cm x 89 cm x 77 cm (66” x 35” x 30”), 59.5 kg (131 lbs)
Receive Frequency (GHz) 10.95 - 12.75 (4) 7.25 - 7.75 Platform: 76.5 kg (168 lbs) 7024C Controller: 6 kg (13 lbs) Cables: 5 kg (11 lbs)
Transmit Frequency (GHz) 13.75 - 14.50 7.90 - 8.40 Reflector Crate: 145 cm x 15 cm x 130 cm (57” x 6” x 51” ), 22 kg (48 lbs)
Midband Gain(±0.2 dB) Total Weight: 169 kg (371 lbs)
(Rx) 41.50 37.40 1-Piece Transportable Case: (Optional)
(Tx) 43.00 38.10 219 cm x 143 cm x 84 cm (86” x 56” x 33” ), Appr. 164 kg (362 lbs)
Antenna Noise Temp. (K) 20° EL=46 / 30° EL=43 20°EL=51.6
2-Piece Plastic Transportable Cases: (Optional)
Sidelobe Envelope, Co-Pol (dBi) Platform: 178 cm x 69 cm x 74 cm (70” x 27” x 29”), 149 kg (328 lbs)
1º < Ø < 20º 29 - 25 Log Ø DSCS Req. Reflector: 132cm x 25cm x 147cm (52” x 10” x 58” ), 49 kg (109 lbs)
20º < Ø < 26.3º -3.5 Total Weight: 198 kg (437 lbs)
26.3º < Ø < 48º 32 - 25 Log Ø
48º < Ø < 180º -10 (averaged) 2-Piece Metallic Transportable Cases: (Optional)
Cross-Polarization Platform: 178 cm x 76 cm x 74 cm (70” x30” x 29”), 161.5 kg (356 lbs)
-30 dB (Max.) Reflector: 132cm x 25cm x 147cm (52” x 10” x 58” ), 50 kg (110 lbs)
Within 1 dB contour
Total Weight: 211.5 kg (466 lbs)
Any angle off axis -25 dB (Max.)
VSWR 1.3:1 (Max.) 1.25:1 (Max.) * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Environmental
Survival Notes:
(1)
Antenna based on Prodelin, Model 1132 / 1134
Wind Deployed 112 km/h (70 mph) (2)
Adjustable at the time of order to support higher elevation angle (Optional)
Wind Stowed 225 km/h (140 mph) (3)
Depending on size and weight for feed arm mounting limitation
Temperature -40ºC to 65ºC (-40°F to 150°F) (4)
LNB PLL Type required with stability better than ± 25 KHz
Operational
Wind 72 km/h (45 mph)
Temperature -32ºC to 55ºC (-26°F to 130°F)
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1500
Technical specifications
The iNetVu® 1500 Drive-Away Antenna is a 1.5m auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
• Features
• One-Piece precision mold, offset feed, carbon fibre reflector
• Heavy duty platform for up to 11kg (25 lbs) RF Electronics
(LNB & BUC)
• Designed to work with the iNetVu® 7000C Controller
• Works seamlessly with the world’s most popular
commercially available satellite modems
• 3 Axis motorization
• Supports manual control when required
• One button, auto-pointing Controller acquires any Ku or C
band satellite within 2 minutes
• Locates satellites using the most advanced satellite
acquisition methods
• Standard 2 year warranty
Application Versatility
If you operate in Ku or C band, the 1500 system is easily configured to provide instant access to satellite communications for any application
that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Military
Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1500
Technical specifications
Mechanical Motors
Reflector 1.5m Carbon Fibre Electrical Interface 12VDC 15 Amp (Max.)
Platform Geometry Parabolic Single Offset, 0.78 F/D (16.9º offset)
Deployment Sensors GPS antenna 2 Port Cross Pol (Ku-Band) Receive Transmit
Compass ± 2º
Tilt sensor ± 0.2º Standard Frequency (GHz) 10.70-12.75 (1) 13.75-14.50
Azimuth Full 360º in overlapping 200º sectors Midband Gain (± .2 dBi) 43.70 45.00
Elevation 0 - 75º Cross Pol: On Axis -35 dB
Polarization ±90º in 1 dB BW -28 dB
Elevation Deploy Speed Variable 2º/sec typ. Sidelobe Compliances Meets ITU 580, INTELSAT
Azimuth Deploy Speed Variable 15º/sec Max., 10º/sec typ. Isolation: Tx / Rx -85 dB 0 dBm input
Peaking Speed 0.2º/sec Rx / Tx 0 dB input -35 dB
Antenna Noise Temp. (˚K) 10˚ EL= 65 / 20˚ EL= 58
VSWR 1.50:1 1.30:1
Environmental
Survival
2 Port C-Band (Linear) Receive Transmit
Wind Deployed 112 km/h (70 mph)
Wind Stowed 225 km/h (140 mph) Standard Frequency (GHz) 3.625-4.20 (1)
5.850-6.425
Temperature -40ºC to 65ºC (-40°F to 150°F) INSAT Frequency (GHz) 4.50-4.80 6.725-7.025
Rain 15 cm/h (6 in/h) Midband Gain (± .2 dBi) 33.40 37.20
Operational Cross Pol: On Axis (Std) -30 dB
Rain 10 cm/h (4 in/h) On Axis (INSAT) -35 dB
Wind 72 km/h (45 mph) in 1 dB BW -26 dB -26 dB
Temperature -30ºC to 55ºC (-22°F to 130°F) Sidelobe Compliances IESS 601 Std G
Relative Humidity 0 - 100% Isolation: Tx / Rx (Std) -60dB 0 dBm input
Solar Radiation 360 btu/h/ft2 (1000 Kcal/h/m) Tx / Rx (INSAT) -70 dB
Radial Ice (survival) 2.54 cm (1”) Rx / Tx 0 dBm input -35 dB
Corrosive Atmosphere As encountered in coastal / industrial areas Antenna Noise Temp. (K) 10˚ EL= 45 / 20˚ EL= 40
VSWR 1.50:1 1.30:1
Electrical
2 Port C-Band (Circular) Receive Transmit
Tx & Rx cables 2 RG6 cables - 9.1m (30 ft) each
Control Cables Standard Frequency (GHz) 3.625-4.20 (1) 5.85-6.425
Standard 9.1m (30 ft) Ext. Cable with MIL Connectors Midband Gain (± .2 dBi) 33.30 37.10
Optional up to 60 m (200 ft) available Sidelobe Envelope, Co-Pol (dBi)
2.8˚ < Ø < 20˚ 29 - 25 Log Ø
20˚ < Ø < 26.3˚ -3.5
RF Interface
26.3˚ < Ø < 48˚ 32-25 Log Ø
Radio Mounting Feed Arm / Rear of Base / Inside Vehicle 48˚ < Ø < 180˚ -10
Axis Transition Twist-Flex Waveguide Feed Interface CPR-229n Type N or CPR- 137
Waveguide WR75 Cover Flange Interface Isolation (Port to Port) -60dB -60dB
Coaxial RG6U from Feed Arm to Base Antenna Noise Temp.(K) 10˚EL= 41 / 20˚EL= 36
Feed 2 port Xpol VSWR 1.50:1 1.30:1
VSWR 1:3:1 (Max.)
Shipping Weights & Dimensions*
Physical
Crate: 213cm x 89cm x 84cm (84” x 35” x 33”), 64.5 kg (142 lbs)
Mounting Plate L: 132 cm (52”) W: 56 cm (22”) Platform: 75.9 kg (167 lbs); 7024C Controller: 6 kg (13 lbs) ; Cables: 5 kg (11 lbs)
Stowed Reflector Ext. Dims L: 189 cm (74.5”) W:154 cm (60.5”) Reflector Crate: 168cm x 168cm x 48cm (66” x 66” x 19”), 115 kg (256 lbs)
H: 49 cm (19.25”) Total, Platform Crate and Reflector Crate, 2 – Pieces: 267kg (589 lbs)
Deployed Height 180 cm (71”)
* The shipping weights/dims can vary for particular shipments depending on actual
Reflector Weight 7.3 kg (16 lbs) system configuration, quantity, packaging materials and special requirements
Total Weight w/Reflector 83.2 kg (183 lbs)
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1800+
Technical specifications
The iNetVu® 1800+ Drive-Away Antenna is a 1.8m auto-acquire satellite antenna system which can be mounted on the roof of a vehicle for direct
broadband access over any configured satellite. The system works seamlessly with the iNetVu® 7000C Controller providing fast satellite acquisition
within minutes, anytime anywhere.
Features
• One-Piece precision offset, thermoset-molded reflector with
back cover
• Optional 2pcs and 4pcs reflector available
• Heavy duty feed arm capable of supporting up to 11kg (25 lbs)
RF Electronics (LNB & BUC)
• Designed to work with the iNetVu® 7000C controller
• Works seamlessly with the world’s most popular commercially
available satellite modems
• 3 Axis motorization
• Supports manual control when required
• One button, auto-pointing controller acquires any Ku or C band
satellite within 2 minutes
• Locates satellites using the most advanced satellite
• acquisition methods
• Supports Skyware Global 1.8m antenna Type 183
• Standard 2 year warranty
Application Versatility
Whether you operate in Ku or C band, the 1800+ system is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration,
Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
1800+
Technical specifications
Mechanical Ku-Band (Linear Orthogonal) Receive Transmit
Reflector 1.8m prime focus, offset feed, SMC (1) Transmit Power (1 to 200 watt ) (2)
Notes: (1)
Antenna based on Skyware Global, Type 183
(2)
Depending on size and weight for feed arm mounting limitation
(3)
LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Technical specifications
Fly-Away
Antennas
Fly-Aways
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Fly-Aways
Technical specifications
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FLY-75V
Technical specifications
The iNetVu® FLY-75V Flyaway Antenna is a 75 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
“Authorized for use on ViaSat Exede® Enterprise - Compliant on KA-SAT NEWSSPOTTER NEWSGATHERING service by Eutelsat”
Features
Application Versatility
If you operate in Ka-band, the FLY-75V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FLY-75V
Technical specifications
Mechanical RF Interface
Reflector 75cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U from transceiver to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Tripod/Reflector L: 85 cm (33.5”) W: 85 cm (33.5”)
Polarization Circular, Auto-switching H: 29 cm (11.5”) 32 Kg
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 38 cm (15.5”) 32 Kg
Peaking Speed 0.1º/sec
Motors
Electrical Interface 24VDC 8 Amp (Max.)
Environmental
Survival
Ballast Deployed 100 km/h (60 mph) Shipping Weights & Dimensions*
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational Case 1: 85 cm x 85 cm x 29 cm (33.5” x 33.5” x 11.5”); 32 kg
Wind - No Ballast or anchors 50 km/h (30 mph)
Case 2: 44.5 cm x 80 cm x 38 cm (17.5” x 31.5” x 15.5”); 32 kg
- With ballast 72 km/h (45 mph)
Temperature -30ºC to 60ºC (-22°F to 140°F) * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Thermal Test per MIL-STD-810F, Method 501.4/502.4, High/Low Temperatures
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked
Shock Test per IEC 60068-2-27, Appendix A
Electrical
Rx & Tx Cable Single IFL, RG6 cable - 10 m (33 ft)
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency (GHz) 18.30 - 20.20 28.10 - 30.00
Feed Interface (Circular) RG6 RG6
Nominal G/T 17.5 dB/K
Nominal EIRP 48.4 dBWi
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FLY-981
Technical specifications
The iNetVu® FLY-981 Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
Features
Application Versatility
If you operate in Ku-band, the FLY-981system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ku terminal delivers affordable broadband
Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
FLY-981
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base (N Type Optional)
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Polarization ± 90º H: 29 cm (11.5”) 32 Kg
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Tripod/Feed arm L: 122 cm (45”) W: 58 cm (19.5”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 28cm (10.5”) 32 Kg
Peaking Speed 0.1º/sec Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
H: 38 cm (15.5”) 32 Kg
Environmental
Motors
Survival
Ballast Deployed 100 km/h (60 mph) Electrical Interface 24VDC 8 Amp (Max.)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational
Wind - No Ballast or anchors 50 km/h (30 mph)
- With ballast 72 km/h (45 mph) Shipping Weights & Dimensions*
Temperature -30ºC to 60ºC (-22°F to 140°F)
Case 1: 109 cm x 109 cm x 29 cm (43” x 43” x 11.5”); 32 Kg
Thermal Test per MIL-STD-810F, Method 501.4/502.4, High/Low Temperatures Case 2: 114 cm x 49.5 cm x 27 cm (45” x 19.5” x 10.5”); 32 kg
Vibration Test per MIL-STD-810F, Annex A, Category 4, Truck/Trailer/Tracked Case 3: 44.5 cm x 80 cm x 38 cm (17.5” x 31.5” x 15.5”); 32 kg
Shock Test per IEC 60068-2-27, Appendix A *The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Electrical
Rx & Tx Cables 2 RG6 cables -10 m (33 ft) each
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency (GHz) 10.70-12.75 (1) 13.75-14.50
Feed Interface WR-75 WR-75
Midband Gain (± 0.2 dBi) 39.70@12.00 GHz 41.20@14.30 GHz
Antenna Noise Temp. (K) 10º EL=53 / 20º EL= 39 / 30º EL= 32 Max.
Sidelobe Envelope Co-Pol (dBi)
1.8º < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -30 dB in 1 dB Contour
VSWR 1.5:1 1.3:1
Note: (1)
LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Prototype / Draft) Apr 2014
Return to Index
FLY-98G
Technical specifications
The iNetVu® FLY-98G Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
Features
Application Versatility
If you operate in Ka-band, the FLY-98G system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
FLY-98G
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Polarization ± 45º, Circular Auto H: 29 cm (11.5”) 32 Kg
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Tripod/Feed arm L: 114 cm (45”) W: 50 cm (19.5”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 27 cm (10.5”) 32 Kg
Peaking Speed 0.1º/sec Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
H: 38 cm (15.5”) 32 Kg
Environmental
Motors
Survival
Ballast Deployed 100 km/h (60 mph) Electrical Interface 24VDC 8 Amp (Max.)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational
Wind - No Ballast or anchors 50 km/h (30 mph) Shipping Weights & Dimensions*
- With ballast 72 km/h (45 mph)
Temperature -30ºC to 60ºC (-22°F to 140°F) Case 1: 109 cm x 109 cm x 29 cm (43” x 43” x 11.5”); 32 Kg
Case 2: 114 cm x 49.5 cm x 27 cm (45” x 19.5” x 10.5”); 32 kg
Case 3: 44.5 cm x 80 cm x 38 cm (17.5” x 31.5” x 15.5”); 32 kg
Electrical * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Rx & Tx Cables 2 RG6 cables -10 m (33 ft) each
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency ( GHz) 19.20 - 20.20 29.50 - 30.0
Feed Interface (Circular) RG6 RG6
Midband Gain (+-0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75 GHz
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -24 dB > -22 dB
VSWR 1.3:1
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
FLY-98V
Technical specifications
The iNetVu® FLY-98V Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
“Compliant for use on ExedeSM Ka Service by ViaSat and on KA-SAT NEWSSPOTTER NEWSGATHERING service by Eutelsat”
Features
Application Versatility
If you operate in Ka-band, the FLY-98V system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
FLY-98V
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Elevation 0 - 90º
H: 29 cm (11.5”) 32 Kg
Polarization Circular, Auto-switching
Case 2: Tripod/Feed arm L: 114 cm (45”) W: 50 cm (19.5”)
Elevation Deploy Speed Variable , 3º/sec typ.
H: 27 cm (10.5”) 32 Kg
Azimuth Deploy Speed Variable 3º/sec typ.
Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
Peaking Speed 0.1º/sec
H: 38 cm (15.5”) 32 Kg
Motors
Environmental
Electrical Interface 24VDC 8 Amp (Max.)
Survival
Ballast Deployed 100 km/h (60 mph)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational Shipping Weights & Dimensions*
Wind - No Ballast or anchors 50 km/h (30 mph)
Case 1: 109 cm x 109 cm x 29 cm (43” x 43” x 11.5”); 32 Kg
- With ballast 72 km/h (45 mph)
Case 2: 114 cm x 49.5 cm x 27 cm (45” x 19.5” x 10.5”); 32 kg
Temperature -30ºC to 60ºC (-22°F to 140°F) Case 3: 44.5 cm x 80 cm x 38 cm (17.5” x 31.5” x 15.5”); 32 kg
* The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Electrical
Rx & Tx Cable Single IFL, RG6 cable - 10 m (33 ft)
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency (GHz) 18.30 - 20.20 28.10 - 30.00
Feed Interface (Circular) RG6 RG6
Midband Gain (+-0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75 GHz
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
VSWR 1.3:1
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
FLY-98H
Technical specifications
The iNetVu® FLY-98H Flyaway Antenna is a 98 cm satellite antenna system which is a highly portable, self-pointing, auto-acquire unit that is
configurable with the iNetVu® 7710 Controller providing fast satellite acquisition within minutes, anytime anywhere. It can be assembled in
10 minutes by one person.
Features
Application Versatility
If you operate in Ka-band, the FLY-98H system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. This next generation Flyaway Ka terminal delivers affordable broadband
Internet services (High-speed access, video & Voice over IP, file transfer, e-mail or web browsing). Ideally suited for industries such as Oil & Gas
Exploration, Military Communications, Disaster Management, SNG, Emergency Communications Backup, Cellular Backhaul and many others.
(1)
Uses Jupiter Radio
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
FLY-98H
Technical specifications
Mechanical RF Interface
Reflector 98 cm Elliptical Antenna, offset feed Radio Mounting Feed Arm
Platform Geometry Elevation over Azimuth Coaxial RG6U F Type to tripod base
Deployment Sensors GPS antenna
Compass ± 2º
Tilt sensor ± 0.1º Physical
Azimuth ± 175º
Elevation 0 - 90º Case 1: Reflector L: 109 cm (43” ) W: 109 cm (43”)
Polarization ± 45º, Circular Manual H: 29 cm (11.5”) 32 Kg
Elevation Deploy Speed Variable , 3º/sec typ. Case 2: Tripod/Feed arm L: 114 cm (45”) W: 50 cm (19.5”)
Azimuth Deploy Speed Variable 3º/sec typ. H: 27 cm (10.5”) 32 Kg
Peaking Speed 0.1º/sec Case 3: Controller/AZ/EL L: 44.5 cm (17.5”) W: 80 cm (31.5”)
H: 38 cm (15.5”) 32 Kg
Environmental
Motors
Survival
Ballast Deployed 100 km/h (60 mph) Electrical Interface 24VDC 8 Amp (Max.)
Temperature -40ºC to 65ºC (-40°F to 150°F)
Operational
Wind - No Ballast or anchors 50 km/h (30 mph) Shipping Weights & Dimensions*
- With ballast 72 km/h (45 mph)
Temperature -30ºC to 60ºC (-22°F to 140°F) Case 1: 109 cm x 109 cm x 29 cm (43” x 43” x 11.5”); 32 Kg
Case 2: 114 cm x 49.5 cm x 27 cm (45” x 19.5” x 10.5”); 32 kg
Case 3: 44.5 cm x 80 cm x 38 cm (17.5” x 31.5” x 15.5”); 32 kg
Electrical * The shipping weights/dims can vary for particular shipments depending on actual
system configuration, quantity, packaging materials and special requirements
Rx & Tx Cables 2 RG6 cables -10 m (33 ft) each
Control Cables
Standard 10 m (33 ft) Ext. Cable
Optional up to 60 m (200 ft) available
Receive Transmit
Frequency ( GHz) 19.20 - 20.20 29.50 - 30.0
Feed Interface (Circular) RG6 RG6
Midband Gain (+-0.2 dBi) 43.50 @19.75 GHz 46.60 @29.75 GHz
Antenna Noise Temp. (K) 30º EL= 62 Max.
Sidelobe Envelope Co-Pol (dBi)
100λ / D < Ø < 20º 29 - 25 Log Ø
20º < Ø < 26.3º -3.5
26.3º < Ø < 48º 32-25 Log Ø
48º < Ø < 180º -10 (typical)
Cross-Polarization > -24 dB > -22 dB
VSWR 1.3:1
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
ACFLY-1200
Technical specifications
The iNetVu® Airline Checkable Flyaway antenna system is a highly portable unit with a 6-piece carbon fibre reflector that can fit in a suitcase. It is
configurable with the auto-pointing iNetVu® 7024C Controller, cables and another electronic device such as a modem or PowerSmart power supply
that can be installed in the second case.
Features
Application Versatility
The Airline Checkable Flyaway system is easily configured to provide instant access to satellite communications for any application that requires
remote connectivity in a rugged environment. Ideally suited for applications that require a quick, simple set-up; vertical markets such as Disaster
Management, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services will benefit tremendously from the ACFLY’s
ease of deployment.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
ACFLY-1200
Technical specifications
Mechanical Motors
Reflector 1.2m Offset Feed, carbon fibre Electrical Interface 24VDC 5 Amp (Max.)
Platform Geometry Elevation over Azimuth
Offset Angle 15º
Antenna Optics Single Offset Cases
Azimuth ± 180º
Case1: 6-piece antenna platform
Elevation 10º - 90º
48.5 x 71 x 39 cm (19” x 28” x 15.3”), 32 kg (70 lbs)
Polarization ± 95º
Case 2: 3U Rack mount including iNetVu® 7024 Controller + feed + cables:
Elevation Deploy Speed Variable 2º /sec typ.
48.5 x 71 x 39 cm (19” x 28” x 15.3”), 32 kg (70 lbs)
Azimuth Deploy Speed Variable 5º /sec typ.
Case 3 (Optional): 4U Rack mount
Peaking Speed 0.1 /sec
62.2 x 34.3 x 47.6 cm (24.5” x 13.5” x 18.8”),10.7 kg (23.5 lbs)
Environmental
Ku-Band (Linear)
Wind loading
Transmit Power 1 to 200 watt
Operational
Feed 2 Port XPol
With Ballast / Anchors 50 km/h (31 mph)
Receive Transmit
Survival 145 km/h (90 mph)
Frequency (GHz) 10.70 - 12.75 (1) 13.75 - 14.50
Temperature
Feed Interface WR75 WR75
Operational -30º to 55º C (-22º to 131º F)
Efficiency 70% 70%
Survival -40º to 65º C (-40º to 149º F)
Midband Gain (± .2 dBi) 41.50 43.00
Solar Radiation 360 BTU/h/sq. ft.
Antenna Noise Temp. (K) 10º EL= 45 / 30º EL= 24
Rain 1.3cm/h (0.51 in/h)
Sidelobe Envelope Co-Pol (dBi)
1.5º<Θ<20º 29-25 Log Θ
Vibration per MIL-STD-810F, Annex A, Category 4, Truck/trailer/tracked
20º<Θ<26.3º -3.5
Shock Test per IEC 60068-2-27
26.3º<Θ<48º 32-25 Log Θ
Bump Test per IEC 60068-2-29
48º<Θ -10 Typical
Drop and Topple per IEC 60068-2-31
Cross-Polarization on Axis >35 dB
Free- Fall Drop per IEC 60068-2-32, and ISTA 1A
Within 1dB Beamwidth >30 dB
Dust and Water Ingress per IEC 60529, IP65
Return Loss 17.7 dB typ. 20 dB typ.
Insertion Loss 0.3 dB typ. 0.1 dB typ.
Tx/Rx Isolation 40 dB 90 dB
Electrical VSWR 1.3:1 1.3:1
Rx & Tx Cables 2 RG6 Cables -10m (33 ft) each
Control Cables
Standard 10m (33 ft) Ext. Cable Shipping Weights & Dimensions*
Optional Up to 60m (200 ft) available
Platform Case: 74 cm x 43 cm x 51 cm (29’’ x 17’’ x 20’’), 34 kg (75 lbs)
Controller Case: 74 cm x 43 cm x 51 cm (29’’ x 17’’ x 20’’), 34 kg (75 lbs)
RF Interface * The shipping weights/dims can vary for particular shipments depending on actual
Radio Mounting Back of Reflector system configuration, quantity, packaging materials and special requirements
Axis Transition Rigid + Twist-flex Guide
Waveguide WR75 Cover Flange Interface
Coaxial RG6U F Type
Note: (1)
LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FLY-1201
Technical specifications
The iNetVu® 1.2m Flyaway Antenna System is a highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7024C Controller
and can be assembled in less than 15 minutes by one person. The antenna features a 2-piece segmented glass fibre reinforced reflector with compact
pedestal and is designed to be value priced while providing exceptional performance in a light weight package.
Features
Application Versatility
If you operate in Ku-band, the FLY-1201 Flyaway System is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Disaster Management,
Military, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FLY-1201
Technical specifications
Notes:
(1)
Depending on size and weight for feed arm mounting limitation
(2)
LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FLY-1801
Technical specifications
The iNetVu® FLY-1801 Antenna is a 1.8m highly portable, self-pointing, auto-acquire unit that is configurable with the iNetVu® 7024C Controller and can
be assembled in less than 20 minutes by one person. The antenna features a 6-piece carbon fibre reflector with compact pedestal and is designed to be
value priced while providing exceptional performance in a light weight package.
Features
Application Versatility
Whether you operate in Ku or C band, the 1.8m Flyaway system is easily configured to provide instant access to satellite communications for any
application that requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Disaster Management,
Military, Oil & Gas Exploration, Mining, Construction, Mobile Offices and Emergency Services.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FLY-1801
Technical specifications
Mechanical Ku-Band (Linear Orthogonal) Receive Transmit
Reflector 1.8m offset feed, Carbon Fibre Transmit Power (1)
1 to 200 watt
Platform Geometry Elevation over Azimuth Frequency (GHz) 10.95-12.75 (2) 13.75-14.50
Deployment Sensors GPS Antenna Compass ± 2º, Tilt Sensor ± 0.2º Feed Interface WR75 WR75
F/D Ratio 0.80 Efficiency 70% 70%
Azimuth Full 360º in overlapping, 200º sectors Midband Gain (± 0.2dBi) 45.30 46.50
Elevation 0º to 90º Antenna Noise Temp. (K) 10º EL= 60 / 20º EL= 53
Polarization ± 95º Sidelobe Envelope, 1º<Θ<20º 29-25 Log Θ
Elevation Deploy Speed Variable 2º /sec typ. Co-Pol (dBi) 20º<Θ<26.3º -3.5
Azimuth Deploy Speed Variable 5º /sec typ. , 2º /sec typ. 26.3º<Θ<48º 32-25 Log Θ
Peaking Speed 0.2º /sec 48º<Θ<180º -10 (Average)
Motor Voltage 24VDC 10 Amp (Max.) Cross-Polarization on Axis -35 dB -35 dB
Within 1dB Beamwidth -28 dB -28 dB
Environmental
Isolation (Port to Port) 30 dB 85 dB
Wind loading
C-Band (Linear) Receive Transmit
Operational 40 km/h (25 mph)
Survival Standard Frequency (GHz) 3.40-4.20 5.850-6.725
Deployed 72 km/h (45 mph) Feed Interface WR229 WR137 or Type N
Stowed 100 km/h (62 mph) Midband Gain (± 0.3 dBi) 35.40 39.30
Temperature Antenna Noise Temp. (K) 10º EL= 43 / 20º EL= 38
Operational -30º to 60º C (-22º to 140º F ) Sidelobe Envelope, 2.5º<Θ<20 29-25 Log Θ
Survival -40º to 65º C (-40º to 149º F) Co-Pol (dBi) 20º<Θ<26.3º -3.5
26.3º<Θ<48º 32-25 Log Θ
Electrical 48º<Θ<180º 10 (Average)
Cross-Pol: on Axis -30 dB -30 dB
Rx & Tx Cables 2 RG6 Cables
Within 1dB Beamwidth -26 dB -26 dB
Control Cables
Isolation (Port to Port) 30 dB 70 dB
Standard 10 m (33 ft) Extension Cable
Optional Up to 60 m (200 ft) available
C-Band (Circular) Receive Transmit
RF Interface
Standard Frequency (GHz) 3.625-4.20 5.85-6.425
Radio Mounting Feed arm Feed Interface WR229 Type N
Coaxial RG6U Midband Gain (± 0.4dBi) 35.4 39.50
Axis Transition Rigid/Twist-Flex Waveguide Antenna Noise Temp. (K) 10º EL= 55 / 20º EL= 50
Electrical Interface 10 m (33 ft) ext. cables w/MIL connectors Sidelobe Envelope, 2.8º<Θ<20º 29-25 Log Θ
VSWR Rx 1.30:1 Tx 1.30:1 Co-Pol (dBi) 20º<Θ<26.3º -3.5
26.3º<Θ<48º 32-25 Log Θ
Physical 48º<Θ<180º -10 (Average)
Total Weight (w reflector) 162 kg (358 lbs) Isolation (Port to Port) 30 dB 70 dB
Reflector Weight 37 kg (81 lbs)
Total Platform Weight 125 kg (275 lbs) Shipping Weights & Dimensions*
Packaging Cases: TBD
Case 1: 6 Piece Reflector; 110 x 75 x 41 cm, 32 kg
Case 2: Feed arm; 100 x 40 x 23 cm, 32 kg
Case 3: El/Az base; 55 x 50 x 27.5 cm, 32 kg
Case 5: Antenna Elev holder; 124 x 35 x 27 cm, 32 kg
Case 6: Feed; 75 x 32 x 30.5, 20 kg
Notes:
(1)
Depending on size and weight for feed arm mounting limitation
(2)
LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
Please note this is a draft.
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Technical specifications
FMA's
Fixed Motorized
Antennas
FMA’s
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA’s
Technical specifications
FMA-120 FMA-120Ka
FMA-180 FMA-240
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-120
Technical specifications
The iNetVu® 120 Fixed Motorised Antenna system is a self-pointing auto-acquire unit that can be mounted either as a permanent installation or on a
portable fixed base. The antenna works seamlessly with the iNetVu® 7024C Controller.
Features
Application Versatility
The FMA-120 system is easily configured to provide instant access to satellite communications for any application that requires reliable and/
or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management,
Construction, Mobile Offices, Emergency Services, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-120
Technical specifications
Electrical
Elevation Motor 24VDC
Azimuth Motor 24VDC
Rx & Tx Cables 2 RG6 Cables -15m (50 ft) each
Control Cables
Standard 15m (50 ft) Ext. Cable
Optional Up to 60m (200 ft) available
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-120Ka
Technical specifications
The iNetVu® FMA-120Ka, Fixed Motorised Ka-band Antenna system is a self-pointing auto-acquire unit that can be mounted either as a permanent
installation or on a portable fixed base. The antenna works seamlessly with the iNetVu® 7024C Controller.
Features
Application Versatility
If you operate in Ka-band, the FMA-120Ka system is easily configured to provide instant access to satellite communications for any application that
requires reliable and/or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster
Management, Construction, Mobile Offices, Emergency Services, Cellular Backhaul and many others.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-120Ka
Technical specifications
To be determined
Electrical
Elevation Motor 24VDC
Azimuth Motor 24VDC
Rx & Tx Cables 2 RG6 Cables -15m (50 ft) each
Control Cables
Standard 15m (50 ft) Ext. Cable
Optional Up to 60m (200 ft) available
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-180
Technical specifications
The iNetVu® 180 Fixed Motorised Antenna system is a self-pointing auto-acquire unit that can be mounted as a permanent installation. Works
seamlessly with the auto-pointing iNetVu® 7024 Controller.
• Features
• 1.8m Offset, prime focus, glass fibre SMC reflector
• Designed to work with the iNetVu® 7024 Controller
• Works seamlessly with the world’s most popular commercially
available satellite modems
• 2 Axis motorization, 3rd Axis (Polarization) optional
• Supports manual control when required
• It is a cost effective solution for multi-satellite communication
at any location
• One button, auto-pointing controller acquires any Ku or C
band satellite within 2 minutes
• Locates satellites using the most advanced satellite acquisition
methods
• Eliminates costly repointing and network downtime due to
inadvertent motion, satellite change, areas where ground
shifts occur (earthquakes, landslides, mine blast zones, etc...)
• Can be easily relocated when mounted on a semi-permanent
platform without the need for any specialised equipment
• Any compatible fixed installation can be easily converted and
upgraded to a fully motorised system
• Supports Prodelin 1.8m antenna, Model 1184
• System designed for 4W and higher BUCs. 10 kg (Max.) weight
for RF electronics (BUC and LNB)
• 1Year Warranty
Application Versatility
T he FMA-180 system is easily configured to provide instant access to satellite communications for any application that requires reliable and/
or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management,
Construction, Mobile Offices and Emergency Services.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-180
Technical specifications
Crates: TBD
Ku-Band Receive Transmit
Operating Frequency (GHz) 10.95 - 12.75 (1) 13.75 - 14.50
Midband Gain (± .2dB) 45.00 46.50
Antenna Noise Temp. (K) 10º EL= 44 / 40º EL= 33
Sidelobe Envelope Co-Pol (dBi)
Mainbeam <Θ<7º 29-25 LogΘ
7º <Θ< 9.2º +8
9.2º <Θ <48º 32-25 LogΘ
48º <Θ <180º -10 Ave.
Cross Polarization > -30 dB on axis
Feed Interface Type F or N WR 75
VSWR 1.3:1 (Max.)
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-240
Technical specifications
The iNetVu® 240 Fixed Motorised Antenna system is a 2.4m self-pointing auto-acquire unit that can be mounted as a permanent installation. Works
seamlessly with the auto-pointing iNetVu® 7024 Controller.
Features
• 2.4m Offset, 4-piece Prime Focus, Glass Fibre SMC reflector
• Designed to work with the iNetVu® 7024 Controller
• Works seamlessly with the world’s most popular commercially
available satellite modems
• 2 Axis motorization, 3rd Axis (Polarization) optional
• Supports manual control when required
• It is a cost effective solution for multi-satellite communication
at any location
• One button, auto-pointing controller acquires any Ku or C
band satellite within 2 minutes
• Locates satellites using the most advanced satellite acquisition
methods
• Eliminates costly repointing and network downtime due
toinadvertent motion, satellite change, areas where ground
shifts occur (earthquakes, landslides, mine blast zones, etc...)
• Can be easily relocated when mounted on a semi-permanent
platform without the need for any specialised equipment
• Any compatible fixed installation can be easily converted and
upgraded to a fully motorised system
• Supports Prodelin 2.4m antenna, Model 1244
• System designed for light weight BUCs up to 10 kg (Max.)
weight for RF electronics (BUC and LNB)
• 1Year Warranty
Application Versatility
T he FMA-240 system is easily configured to provide instant access to satellite communications for any application that requires reliable and/
or remote connectivity in a rugged environment. Ideally suited for industries such as Oil & Gas Exploration, Mining, Disaster Management,
Construction, Mobile Offices and Emergency Services.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
FMA-240
Technical specifications
Note: (1) LNB PLL Type required with stability better than ± 25 KHz
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Technical specifications
Controllers
& Accessories
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
7000/7024 Controller
Technical specifications
* Please contact C-COM if you require more information about modem compatibility
as these may change without further notice
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
7000/7024 Controller
Technical specifications
• DVB Search - Searches directly for any DVB-S1 or DVB-S2 (ACM) carrier on the target satellite and peaks on it.
• DVB Search, Opposite Polarity – Searches for DVB-S1 or DVB-S2 carrier in the opposite polarity on target satellite, then
rotates polarization axes and enables transmitter if modem signal attained.
• DVB Search, Reference Satellite - Searches for a DVB-S1 or DVB-S2 carrier on ANY configured reference satellite then
moves to t he target satellite and peaks on modem signal.
• RF Automatic Search – The system will stop and search for modem signal when it senses an increase in RF energy
received through the DVB tuner as it passes by the target satellite. If the modem signal is found, the system will begin
the peak process.
• RF Override Search – The user specifies an RF Threshold such that the system stops when it reaches an area above the
threshold a nd looks for modem signal to peak on.
• Beacon Receiver – The Controller works seamlessly with the optional iNetVu® Beacon Receiver by searching for a
specified beacon frequency and then peaks on it (search gain level can be adjusted).
• Auto-Deploy Method - Peaks on a reference satellite then uses precise pointing mechanism to locate the target satellite,
even when n o modem RF or beacon signal is available to peak on.
• Can be operated from a PC application using the USB port Via its web interface, it can be operated remotely or locally
over a network connection
• Can be completely configured from the front panel with a password protected configuration menu
• Protects the platform and its components from damage, using current levels and sensor readings. It includes motion
and movement protection as well
• Provides automatic re-peaking if signal degradation occurs
• Works correctly even when deployed while on an incline (in any direction) of up to 15°
• Can search for both DVB-S and DVB-S2/ACM carriers
• Supports full automatic and manual control of the iNetVu® Platform
• Allows the users to select from multiple speed levels for both azimuth and elevation
• Allows the system to operate unattended in remote locations
• Is able to upload the recorded log information (Maximum of 12 hours) from the controller to the PC for troubleshooting
• Supports full tracking of Inclined Orbit satellites by both signal strength and timed function
• Is capable of powering the LNB with 13-21 Volts, selectable in software
• Provides the option of saving the settings to a configuration file that can be used to configure additional controllers with
the same configuration parameters
• Works seamlessly with Uplogix Remote Management Appliances
• Supports both GPS and GLONASS Satellite Navigation Systems
• Supports Electronic Flux Gate Compass for increased speed of acquisition
• Designed and manufactured to the highest standards of quality and reliability by C-COM
• Supports all iNetVu® Mobile antenna platforms
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
7710 Controller
Technical specifications
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
7710 Controller
Technical specifications
• DVB Search - Searches directly for any DVB-S1 or DVB-S2 (ACM) carrier on the target satellite and peaks on it.
• DVB Search, Opposite Polarity – Searches for DVB-S1 or DVB-S2 carrier in the opposite polarity on target satellite, then rotates
polarization axes and enables transmitter if modem signal attained.
• DVB Search, Reference Satellite with modem - Searches for a DVB-S1 or DVB-S2 carrier on ANY configured reference satellite
then moves to the target satellite and peaks on modem signal.
• DVB Search, Reference Satellite without modem - Peaks on a reference satellite then uses precise pointing mechanism to locate
the target satellite, even when n o modem RF or beacon signal is available to peak on.
• RF Automatic Search – The system will stop and search for modem signal when it senses an increase in RF energy received
through t he DVB tuner as it passes by the target satellite. If the modem signal is found, the system will begin the peak process.
• RF Override Search – The user specifies an RF Threshold such that the system stops when it reaches an area above the
threshold and looks for modem signal to peak on.
• Beacon Receiver – The iNetVu® Controller works seamlessly with the optional iNetVu® Beacon Receiver by searching for a
specified beacon frequency and then peaks on it (search gain level can be adjusted).
• Can be operated from a PC application using the USB port or network port
• Has built in web interface that can be operated remotely or locally over a network connection
• Can be completely configured from the front panel with a password protected configuration menu
• Protects the platform and its components from damage, using current levels and sensor readings. It includes motion and
movement protection as well
• Provides automatic re-peaking if signal degradation occurs
• Works correctly even when deployed while on an incline (in any direction) of up to 15°
• Can search for both DVB-S and DVB-S2/ACM carriers
• Supports full automatic and manual control of the iNetVu® Platform
• Allows the users to select from multiple speed levels for both azimuth and elevation movements
• Allows the system to operate unattended in remote locations
• It is able to upload the recorded log information (Maximum of 12 hours) from the controller to the PC for troubleshooting
• Supports full tracking of Inclined Orbit satellites by both signal strength and timed function
• Is capable of powering the LNB with 13-21 Volts, selectable in software
• Provides the option of saving the settings to a configuration file that can be used to configure additional controllers with the
same configuration parameters
• Works seamlessly with Uplogix Remote Management Appliances
• Supports both GPS and GLONASS Satellite Navigation Systems
• Supports Electronic Flux Gate Compass for increased speed of acquisition
• Designed and manufactured to the highest standards of quality and reliability by C-COM
• Only works with iNetVu® Mobile antenna platforms which are equipped with 7720 on board module
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change (Draft) Apr 2014
Return to Index
3000 Controller
Technical specifications
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Beacon Receiver
Technical specifications
The iNetVu® BR300L 19” rack mount Beacon Receiver is a high performance unit designed to track the power density of a satellite beacon
in real time. It supplies a DC voltage output that is linearly proportional to the beacon power by utilizing a true, RMS - responding power
detector.
The BR300L has been specifically designed to work seamlessly with all iNetVu® controllers and antenna platforms.
System Environmental
Input Frequency 930 MHz - 2300 MHz Operating Temperature 0º to +50º C (32º to 122º F)
Pre-detection Bandwidth 50 kHz Storage Temperature -40º to +70º C (-40º to +158º F)
Input Level - 90 dBm (Min.), -30 dBm (Max.) Humidity 95% RH @ 40º C
Frequency Tuning 10 kHz steps
Frequency Adjust Front panel or remotely
Physical
AFC ± 23 kHz
Threshold 45 dB-Hz, for acquisition Size 4.5 cm (1.75”) H; 41 cm (16”) D
Input Impedance 75 Ohm (Optional 50 Ohm)(1) 48 cm (19“) W
Input Connector Type F, Female Weight 3.63 kg (8lbs)
Output Impedance 100 Ohm, Single ended Primary Power 90-264 VAC 47 - 63Hz, 1.4A Autosensing
Output Connector Terminal Plug & BNC Female
Tracking Gradient 0.5 V/dB
Tracking Response 0 to +10 VDC Certification
System Level Range 60 dB Complies with FCC Part 15 Class B
System Level Adjust 0 to 60 dB, 0.5 dB Steps CE & VCCI Approvals for Emission & Immunity Standards
Frequency Stability <1 ppm, 0º to +50º C (32º to 122º F)
Frequency Reference 10 MHz (Internal) Shipping dimensions
Phase Noise >75 dB-Hz, 1 kHz from Carrier Receiver box:
Alarms Unit Lock 56 cm x 51 cm x 13 cm (22” x 20” x 5”), 3.7 kg (8 lbs)
Alarm Relay Form-C
External LNB Power +18VDC, Switched, In/Out, 500ma, (Max.)
Front Panel Display Vacuum Fluorescent
M&C RS-232 or RS-422/485 switched on rear panel
M & C Connector DB-9, Female
Note: (1)
For 50 Ohm/N-Type please order BR300L-N (SMA Type is also available)
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
PowerSmart
Technical specifications
The PowerSmart 2480 has been designed to provide 24 / 48 VDC or 110 / 220 VAC power to external amplifiers / BUCs, and includes features to support
Monitor and Control (M&C) functions for several products. Most DC / AC powered BUCs, SSPAs and TWTAs can be integrated with the PowerSmart 2480,
for an efficient and convenient hardware solution to provide POWER plus M&C control to an outdoor transmitter unit.
Features
• 19 inch 1U rack mount unit
• Amplifier functions such as TX Enable / Disable and operational
status can be monitored and controlled from a convenient
operator control panel. (1)
• The amplifier manufacturer’s software can typically be operated
from a PC platform through the configurable port, over RS232,
RS485 or SNMP interface as required.
• Enabling the Transmit function, monitoring BUC faults and the
presence of 10 MHz reference on the IFL, verifying output power
level and other common functions along with the rack mount
format make the PowerSmart 2480 a value-added solution to
higher-powered VSAT applications.
• Configuration parameters, onboard statistics and fault
information can be accessed via the amplifier’s control interface
(if available) through a convenient data port on the panel.
• Optional support for Bias-T, DC Blocker, MUX-T with 10 MHz
clock, all in one convenient rack mount enclosure.
• Standard 2-Year Warranty
Note:
(1)
Listed features are BUC dependent. Some front panel features related to M&C
control may not be supported by some BUC manufacturers. Please inquire for
further clarifications.
Application Versatility
The iNetVu® PowerSmart 2480 is ideal for applications where a VSAT transmitter / amplifier requires more power than a satellite modem can provide
over the TX output. This is typical for larger Block Up Converters (BUC) or Power Amplifiers (SSPA, TWTA etc.) that supply over 8 Watts RF output
power.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
PowerSmart
Technical specifications
Environmental
Front Panel Switches
Operational Temperature -20º C to +60º C (-4º F to 140º F) Power ON / OFF
Storage Temperature -40º C to +85º C (-40º F to 185º F) BUC Control (1) Enable / Disable transmitter
Humidity 10 - 95% RH
Compatibility
Physical
Supports most AC / DC Powered BUC in the market
Dimensions W: 48.3 cm (19”)
D: 36.2 cm (14”)
H: 4.5 cm (2”)
Weight 6.3 kg (14 lbs) PC Interface
DB9 on front panel used to access BUC Software via PC
Input
Voltage Range 85 - 264VAC
Frequency Range 47 - 63 Hz
AC Current 6.5A / 115VAC
3.5A / 230VAC
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
SolarPack
Technical specifications
The iNetVu® SolarPack is a rugged, portable solar power system that can supply up to 600W of quiet AC power for fast-deployment, multi-day situations.
The S1600 is ideal for communication and/or electronic equipment where reliable, high quality power is required.
Features
• Provides reliable, high-quality AC or DC current
• Compact, complete system to provide independent, clean and
quiet power supply
• Rugged, weatherproof, wheeled case with stainless steel
bearings and a retractable handle plus two side handles for
efficient handling
• Modular, hot-swappable and easily scalable by adding extra
modules
• Full Featured Battery Monitor
• Automatic overload shutdown, over-temperature and high
surge protection, low voltage alarm and shutdown to protect
total battery discharge
• Choice of sealed, low maintenance Lead-Acid battery or light-
weight super long life Lithium battery
• 2 high-efficiency, 62W, foldable solar panels (expandable to 8
panels)
• Advanced 25A charge controller
• Efficient and rugged electronic inverter for either 120V/60Hz
or 240/50Hz AC power
• Versatile connectivity allows easy use of 12VDC direct from
battery
• System can be charged using solar power, 12V vehicle socket
or grid powered battery charger
• 1 year warranty
Application Versatility
The SolarPack system is ideally suited and easily configured to provide power for many types of equipment that need high quality, reliable power
in a rugged environment; such as: portable satellite antenna; office appliances in the field; or emergency response / checkpoint equipment such
as LED arrays or VHF radios.
Run time
For a remote office complete with satellite connectivity (iNetVu® Flyaway antenna; 7000 Controller; Satellite modem; 3W BUC; Laptop computer;
IP Phone) run time will vary depending on factors such as intensity of sunlight, equipment power requirements and usage discipline, however, the
following should be attainable under the indicated conditions [in each case, starting with fully charged battery(s)]:
• 5 hours - on battery alone with little or no solar input (i.e., when panels are not deployed or in cloudy weather)
• 10 hours (a single, long working day) – 1 module with 2 solar panels properly deployed and monitored and uninterrupted, bright, direct sunlight
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
SolarPack
Technical specifications
Inverter
Note: Performance of solar charging function depends on adequate
Output Voltage 120VAC or 240VAC exposure to sunlight. Standards Compliance; CE and FCC
Frequency 60 Hz or 50 Hz
Power (cont.) 600W
Surge Peak 860W
Waveform Pure Sinewave
Configuration Shelf-mount
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Transportable Cases
Technical specifications
Metallic Option - Aluminum Finish ATA Plastic Option iNetVu® 980 Case:
Major Features
Ideal for Mobile Applications:
• Available in Attractive Black-Coloured ATA Cases
• High-grade Aluminum Extrusion Frames • Military Field Sites, Homeland Security and Police Units
• Durable Plastic and Plywood Laminate Panels • Disaster Recovery Operations
• Water-resistant Flat Surface with Drains • Mobile Medical Units
• Closed Cell Foam Padding • Remote and Temporary Field Offices
• Unique L-Shaped Interlocking Covers • Mining and Forestry Operations
• High-Strength Latches, Corners, and Recessed Handles • News / Media Events
• 1200 Available in plastic or metal • Almost any other store / ship / deploy application
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
External Dimensions (All Heights Include Wheels)
Return to Index
Transportable Cases
Technical specifications
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Cables
Technical specifications
The iNetVu® product line offers a wide range of cables to address the needs of its resellers. The iNetVu® standard configuration
includes four types of cables:
External Sensor Cable - 25 conductor cable Modem Cable - RG6 Co-axial cable
F-Type connectors
- 24 AWG
75 ohm
- Metalized AMP 16 Pin to DB26 connector
1 m (3 feet)
- 10m (33 feet)
- Weight: 1.1 kg (2.5 lbs)
Controller Cable - RG6 Co-axial cable
F-Type connectors
External Transmit Cable (TX) - RG6 Co-axial cable 75 ohm
- F-Type connectors 1 m (3 feet)
- 75 ohm
- 10m (33 feet)
- Weight: 0.5 kg (1 lbs)
Note: The external cables are also offered in sets of 15m (50 feet), 30m (100 feet), 45m (150 feet) and 60m (200 feet).
You can also order the TX cable in 50 ohm with a N-Type connector and the RX cable with a 50 ohm and a N-Type connector.
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Technical specifications
Apllications
Vertical Markets
• Military
• Cellular Backhaul
• Homeland Security
• Emergency Response
• Disaster Relief
• Mining
• Construction
• Mobile Offices
• Mobile Banking
• Recreation Vehicles
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Matrix
Matrix (Antenna Specification Chart)
Return to Index
Matrix
Technical specifications
Drive-Away Antennas
Models ð Ka-98 1201
750 Ka-75V 980 981 1200 1500 1800+
Features ò G | V | H w/pod
Deployed Height (mm) 1160 1260 1320 1481 1510 1510 1510 1676 1650 1800 2480
Stowed Height (mm) 463 292 463 290 292 292 292 488 340 490 670
Elevation (degrees) 0 to 65 0 to 90 0 to 65 0 to 90 0 to 90 0 to 90 0 to 90 0 to 78 0 to 90 0 to 75 0 to 80
Wind Deployed (km/h) 160 160 160 160 160 160 160 112 112 112 112
Wind Stowed (km/h) 225 225 225 225 225 225 225 225 160 225 225
Survival
-40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65
Temperature (°C)
Operational,
72 72 72 72 72 72 72 72 75 72 72
Wind (km/h)
Operational,
-30 to 55 -30 to 55 -30 to 55 -30 to 55 -30 to 55 -30 to 55 -30 to 55 -32 to 55 -30 to 55 -30 to 55 -32 to 55
Temperature (°C)
Controller 7000C 7024C 7000C 7024C 7024C 7024C 7024C 7000C 7024C 7000C 7000C
Standard Cables (75 Ohm) CB-7000-30-MIL CB-7024-10 CB-7000-30-MIL CB-7024-10 CB-7024-10 CB-7024-10 CB-7024-10 CB-7000-30-MIL CB-7024-10 CB-7000-30-MIL CB-7000-30-MIL-18
(50 Ohm - Optional) 9.1m (30 ft) 10m (33 ft) 9.1m (30 ft) 10m (33ft) 10m (33 ft) 10m (33 ft) 10m (33 ft) 9.1m (30 ft) 10m (33 ft) 9.1m (30 ft) 9.1m (30 ft)
Optional Cable Lengths 10-60m 10-60m 10-60m 10-60m
60m (200 ft) (33 - 200 ft) 60m (200 ft) 60m (200 ft) 60m (200 ft) 60m (200 ft) 60m (200 ft) 45m (150 ft)
(up to) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft)
Warranty 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years 2 years
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014
Return to Index
Matrix
Technical specifications
Deployed Height(mm) 1325 1660 1660 1580 1580 N/A 1580 N/A N/A N/A N/A
Stowed Height (mm) 290 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Elevation (degrees) 0 to 90 0 to 90 0 to 90 0 to 90 0 to 90 5 to 90 10 to 90 0 to 90 10 to 90 10 to 90 10 to 90
Ku: 13.75-14.50
Ku: 13.75 - 14.50
Frequency Tx (GHz) 28.10 - 30.0 13.75-14.50 29.50 - 30.00 28.10 - 30.00 29.50 - 30.00 13.75 - 14.50 29.50 - 30.00 13.75 - 14.50 14.0 - 14.50 C- Linear: 5.85-6.425
X: 7.90 - 8.40 C- Circular: 5.85-6.425
Ku: 47.40 49.20
Ku: 41.80, 43.30
Midband Gain (Rx, Tx) 41.40, 44.50 39.70, 41.20 43.50, 46.60 43.50, 46.60 43.50, 46.60 41.50, 43.00 46.50, 49.90 41.50, 43.00 45.00, 46.50 C- Linear: 38.20, 42.20
X: 37.20, 37.80 C- Circular: 38.00, 42.00
Wind Deployed (km/h) 100 w/ballast 100 w/ballast 100 w/ballast 100 w/ballast 100 w/ballast 145 145 200 200 200 200
Wind Stowed (km/h) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
SurvivalTemp.°C) -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65 -40 to 65
Operational Wind 50 no ballast 50 no ballast 50 no ballast 50 no ballast 50 no ballast 48 no ballast 50w/ballast 72 72 72 72
(km/h) 72 w/ ballast 72 w/ ballast 72 w/ ballast 72 w/ ballast 72 w/ ballast 72 w/ ballast
Operational, Temp.(°C) -30 to 60 -30 to 60 -30 to 60 -30 to 60 -30 to 60 -30 to 55 -30 to 55 -30 to 60 -30 to 60 -30 to 60 -30 to 60
Controller 7710 7710 7710 7710 7710 7024C 7024C 7024C 7024C 7024C 7024C
Stand. Cables(75 Ohm) CB-FLY-SAT-30 CB-FLY-AC-30 CB-FMA-1200-50-F CB-FMA-1200-50-F CB-FMA-1800-50-F
7.5m (25 ft) 10m (33 ft) 10m (33 ft) 10m (33 ft) 10m (33 ft) 15m (50 ft)
(50 Ohm - Opt.) 10m (33 ft) 10m (33 ft) 15m (50 ft) 15m (50 ft) 15m (50 ft)
Opt. Cable Lengths N/A 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m 10-60m
(up to) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft) (33 - 200 ft)
Warranty 2 years 2 years 2 years 2 years 2 years 2 years 1 year 1 year 1 year 1 year 1 year
613-745-4110 | 1- 877-463-8886
www.c-comsat.com Specifications are subject to change Apr 2014