Beruflich Dokumente
Kultur Dokumente
, MASCE
Saint Joseph Street, Al Bouar, Keserwan, Lebanon
Tel: 961 3 272087 – 961 9 444 123
E-mails: oee5@hotmail.com / oee1973@yahoo.ca / oee1973@gmail.com
Holding Armenian Citizenship
Holding a Canadian Permanent Resident Card
«Pavement Analysis, design and maintenance» 3rd Teaching Workshop (32 hours)
Certificate of Attendance – TEMPUS & HiT 4Med Highway and Traffic Engineering,
Nov. 2014 “University of Catania”, Sicilia, It.
Bachelor of Engineering (B.Eng) Civil Engineering – Structure & Public Works, June 1995
Civil Engineering, Lebanese University Engineering Faculty II, Roumieh, Lebanon
(Equivalent to a Master of Civil Engineering) (GPA 82/100)
INTRODUCTION LETTER
A Master in Civil Engineering since 1995, from the ULFG II (Univertité Libanaise Faculté de Genie, branche
II), coupled to another Master of Building engineering in Construction Management acquired from Concordia
University, Montreal, Ca and then a PhD degree in construction management, further to many training
programs in management and safety were the back ground of more than Twenty years of experience in the
professional engineering fields. Wide professional experiences in structure design and project management
are conducted and made me able to achieve the tasks listed hereunder with a high level of the professionalism,
Management Field: (on many simple and complex projects from small to medium sizes)
Owner Rep
Site Supervision and Control
Reinforced Concrete and steel structure design with Seismic/Wind analysis (under ACI/UMC & IBC,
EC, BAEL/PS, CSA/NBCC, …)
Preparation of the Execution drawings and conducting the coordination task for the different trades.
Shop Drawings, Quantities and Specifications (BOQ & Specs)
Preparation of the inspection reports
Technical Supports and control
Engineering judgment analysis, and proposing alternative solutions with economically analyzed
Furthermore, and taking into consideration that I am a membership at the OEA (Ordre des Ingenieurs et
Architectes Liban) and at OIQ (Ordre des Ingenieurs du Quebec – P.Eng), I am conducting continuously
researches concerning the structure design and construction management as a member of ASCE and through
the position of Head of the Civil Engineering Department at Holy Spirit University of Kaslik - USEK
(Université de Saint-Esprit – Kaslik) University. As chair, I have conducted a team work to achieve the needed
works for ABET Accreditation lead to a break my experience to higher professional levels.
Services
PUBLICATIONS
Refereed
Choueiry Elias, Aoun Joelle and Otayek Elie, 2019 “Alleviating Traffic Congestion in Lebanon with
Special Emphasis on the Roadway Section: Beirut-Jounieh”, Advances in Transportation Studies: an
International Journal.
Otayek Elie, Wehbe Rania and Massaad Zaher, 2019 “Autonomous Vehicle Implementation in
Lebanon: Opportunities, Challenges and Ethical Decisions”, International Conference of Engineering
Risk (INCER-2019).
Wehbe Rania, Otayek Elie M. and Massaad Zaher, 2017 “Using Intelligent Transportation Systems to
Enhance Pedestrian Safety at Beirut Signalized Intersection”, IEEE, MTS 2017 Napoli, 26-29 Jun 2017.
Choueiri Elias M., Aoun Joelle and Otayek Elie M., 2017 “Effectiveness of the newly introduced
Variable Message Signs in Lebanon on driver behavior”, IEEE, MTS 2017 Napoli, 26-29 Jun 2017.
Otayek Elie, 2016 “Integrated Decision Support System for Bridges at Conceptual Design Stage”,
Final Thesis Report for Ph.D. of Building Engineering, ENCS, BCEE, Concordia University,
Quebec, Canada.
Otayek Elie and Jrade Ahmad, 2016 “Optimization for Bridge Type Selection Using Artificial
Neural Network”, CSCE2016 Resilient Infrastructure London, UK June 1-4, 2016.
Otayek Elie, Jrade Ahmad and AlKass Sabah, 2013 “Integrating the Artificial Intelligence techniques
into Bridge Information Modeling (BrIM)”, CSCE 2013 Annual Conference, Montreal, Canada May 29
– June 1, 2013.
Otayek Elie, Jrade Ahmad and AlKass Sabah, 2012 “Integrated Decision Support System for Bridges at
Conceptual Design Stage”, CIB W78-2012 Conference, the 29th International Conference on
Applications of IT in the AEC Industry Beirut, Lebanon 17-19 October 2012.
In Progress
Otayek Elie, Wehbe Rania and Massaad Zaher, 2019 “Trip Attraction Models Using Regression
Analysis for Shopping Centers in Lebanon”, CSCE Annual Conference – General Conference.
Otayek Elie and Dikranian Rita, 2019 “Performance and Sustainability of the Concrete Containing
Different Types of Solid Wastes”, CSCE Annual Conference - 7th International Conference on
Engineering Mechanics and Materials.
Otayek Elie, Jrade Ahmad and Zhenhua Zhu, 2018 “Guiding a Decision’s Subjectivity for Bridge Type
Selection at the Conceptual Design Phase”, Publisher Not defined yet.
Design Experience
Codes
Practice & Familiar with ACI, BAEL, CSA, NBCC, UBC, IBC, PS, ASCE, EC codes.
Software
Set of software of typing, planning, structure and drafting programs:
Ms Office, Autocad, PCA, Staadpro, Robot, Ms Project & Primavera, etc…
LANGUAGES
Arabic, French, English.
REFEREES
Prof. Marwan Al Rassy, Ex-Chair Dr. Ahmad Jrade, Ph.D., MASCE,
Department of Civil Engineering Associate Professor
Main Building, Engineering Faculty II Department of Civil & Construction
ULFG II, Roumieh, Lebanon Engineering
Tel: 961 4 821 063 – 961 3 772 632 Ottawa University
E-mail: mrassy@hotmail.com Ottawa, Ontario, Canada
Tel: 613 897 2290
Prof. Khaled Galal, Ph.D., Ass. Chair E-mail: ajrade@gmail.com
Department of Building,Civil &
Environmental Engineering, Concordia Eng. Sleiman Serhal
University, H3G 2W1 Serhal Consultancy Office - Owner
EV 6.167, 1515 St. Catherine W., Qc,Ca. Hamra, Makdiseh Street
Tel : 514-848-2424 Ext 3196 Tel: 961 1 345 003 – 961 3 327 100
E-mail : galal@bcee.concordia.ca E-mail: moni@serhal.net