Beruflich Dokumente
Kultur Dokumente
PRODUCT BENEFITS
Finish Adhesion
WATER BASED
Better Sheen provides beauty to the concrete It provides an excellent adhesion to concrete
floors substrate
Abrasion Resistance
Better abrasion resistance provides low wear and * All Asian Paints products contain no added
Lead, Mercury, Arsenic or Chromium
PRODUCT FEATURES
WASHABILITY COLOURS AVAILABLE COVERAGE
30*
BEST IN CLASS On smooth masonry surface by brushing
HIGH
MEDIUM 1 COAT*
30 - 50sq.ft/ltr
LOW
6-8
0
MATT LOW SHEEN RICH SHEEN HIGH GLOSS
45 15
SMOOTH
1 ltr 4 ltr 30 HOURS
Shelf life: 3 years from date of manufacture in original tightly Refer to sheen levels in technical details
closed containers away from direct sunlight and excessive heat.
HOW TO APPLY
PRE PAINTING STEPS APPLICATION PROCESS FOR FRESH SURFACES
CURING: For freshly made APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
concrete surface, allow it to VISCOSITY1 PERIOD
cure for at least 4 weeks before STEP 1
painting. APEX FLOOR GUARD
CONCRETE BLOCK/ STAMPED
CONRETE (FRESH) 5443 NA NA BRUSH 30 - 40 4 - 6 HRS
STEP 2
APEX FLOOR GUARD
SMOOTH CONCRETE/ STAMPED 5443 NA NA BRUSH 30 - 40 4 - 6 HRS
CONRETE (FRESH)
1. As measured through a Ford cup FC B4. 2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
*
Mineral Turpentine Oil
Finishes for Exterior Floors
ADDITIONAL INFORMATION
Allow atleast 24 hours of curing before foot > During Surface preparation, any previous growth of fungus, algae or moss need to be
traffic begins. For the best performance, removed thoroughly by vigorous wire brushing and apply Smartcare Bioblock on algae or
ensure proper washing and cleaning of the fungus affected area after cleaning
painted surface at regular intervals. Do not > Do not apply the paint under conditions of frost, dew, rain, fog or adverse weather (below 5°C
wash the surface with wire brush. or above 50°C surface temperature)
> Flaky, Powdery substrate should not be paints directly.
> Do not apply on Bituminous/Asphalt substrate.
TECHNICAL DETAILS
Version No. VN01/01/2014. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India