Sie sind auf Seite 1von 1

T R A N S M IS S ION PART S

Instructions

Jatco/Nissan JF010E (RE0F09A/RE0F09B)


Oversized Pump
Flow Control Valve JF010E
TOOL Pump Body
Part No. R

113741-07
EQ
D

UIRE

Tool Kit
Part No.
F-113741-TL7C
• Carbide Reamer
• Reamer Jig Tool
• Guide Pin Kit

NOTE: Use of the VB-06 base


plate is highly recommended Oversized
when using the F-113741-TL7C Pump Flow
tool kit. The standard VB-FIX Control Valve
base plate would require drilling and
tapping to allow reverse installation.
1. Disassembly
Sonnax “F-Tool” kits designed to service a. Remove and discard OE pump flow control valve.
a specific bore require the VB-FIX, a
self-aligning valve body reaming fixture. b. Keep OE threaded plug, spring cage and spring.
More information and instructions can be
found online at www.sonnax.com. 2. Bore Reaming
Ream pump flow control bore (for reaming instructions/reamer care, please visit www.sonnax.com).
Sonnax reaming tool kit F-113741-TL7C and VB-FIX are required for this operation.
NOTE: Once alignment is complete, do not loosen wing nuts or un-clamp the pump body from fixture
until entire reaming process is completed.

3. Installation & Assembly 20


25
15
10
5

a. Be certain all debris has been removed from


30 0
VACUUM
TEST

the valve bore and valve body. 14"-Hg

b. Install Sonnax valve.


c. Reinstall OE spring, spring cage and threaded
end plug.

4. Final Testing
Vacuum testing at the port(s) indicated holds
the recommended minimum 14 in-Hg.
JF010E Pump Body

©2019 Sonnax Transmission Company, Inc. • A Marmon / Berkshire Hathaway Company 113741-07-IN 02-21-19


800-843-2600 • 802-463-9722 • F: 802-463-4059 • www.sonnax.com

Das könnte Ihnen auch gefallen