Beruflich Dokumente
Kultur Dokumente
com --
337
Fluids
338 fluids • CUTTING FLUIDS
Cutting Fluid
Xtra-ThickTM w/ EP-XTRA®
Highly effective for any cut on any metal, it is
without equal when making cuts of long duration An ozone-friendly, professional quality cutting
on the hardest metals such as inconel, titanium, fluid that delivers superior performance for any
stainless and other hardened steels. In fact, it’s cutting operation on any metal. And it helps
highly effective on any metal up to 45 RC! promote longer tool life.
Contains the proprietary EP-X3® additive for Proprietary additive EP-XTRA®, provides
a performance boost. It virtually eliminates a synergistic boost in performance.
work hardening. And it has an extended cling
time — so it stays with the tool and work piece Absolutely without equal on harder metals and
longer for deep hole cuts. Plus it won’t sling for cuts of extreme pressure or long duration.
off as readily when used for lathe and mill work.
Aluminum ProTap®
Professional-quality cutting fluid that’s specially Outstanding high performance cutting fluid
engineered for cutting and machining operations that’s 100% biodegradable and totally free
on aluminum and other non-ferrous metals. of all regulated chemicals. You can use this
cutting fluid with complete confidence for
This is absolutely the most effective cutting fluid any cutting operation on any metal.
you can use for working with aluminum. Drilling,
tapping, sawing…regardless of the cut, you’ll It provides excellent performance for hard metals
enjoy superior performance, superb precision, such as stainless steel. And it will not stain or
and a beautiful microfine finish. Dissipates heat otherwise change the properties of even soft
rapidly and provides closer tolerances. It also metals such as aluminum. Regardless of the cut,
helps promote longer tool life. heat dissipation is rapid and the resultant finish is
ultra-fine. Clean up is easy too.
Part No. Our
Description 1-444- Net Price Part No. Our
4 oz. Spout Top -20004A $2.50 Description 1-444- Net Price
12 oz. Aerosol -20012AL 8.70 4 oz. Spout Top -30004P $2.50
16 oz. Spout Top -20016A 7.85 12 oz. Aerosol -30012PL 8.70
1 Gallon Can -20128A 47.05 16 oz. Spout Top -30016P 7.85
5 Gallon* -20640A 188.10 NON-OZONE 1 Gallon Can -30128P 47.05 NON-OZONE
DEPLETING 5 Gallon -30640P 198.00 DEPLETING
* WHILE SUPPLIES LAST.
Formula 1 Formula 2
Aqueous Eco-Oil
An environmentally friendly cutting fluid which
delivers outstanding performance for virtually all Environmentally friendly cutting fluid which delivers
metal cutting operations, and helps promote longer outstanding performance for virtually all metal cutting
tool life. Completely biodegradable, and contains operations, and helps promote longer tool life. Completely
the proprietary additive EP-X3® for a synergistic biodegradable, and contains the proprietary additive
boost in performance. EP-X3® for a synergistic boost in performance.
Special water base that, unlike most waterbased Unique base of natural oil that resists smoking and fuming,
fluids, is non-corrosive. This super-safe fluid provides making this fluid ideal for applications that require extended
superior cooling and minimizes clean up. It is cutting time or produce a lot of heat. Effective on all metals.
recommended for all metals except magnesium.
SPECIFIC HAZARD
$2032 $9790 C $1500 $7175
SPECIFIC HAZARD
SAWZIT™ MICROCHIP™
PURE SYNTHETIC
SAWING LUBRICOOLANT
UNIVERSAL™ GRINDZAL™
PURE SYNTHETIC GRINDING COOLANT.
FEATURES: FLAMM ABILITY
• Biodegradeable and exhibits excellent safety
with ease of disposal. When properly cleaned
of tramp oils and metal fines, residual shoud HEALTH REACTIVITY
be compatible with local codes. User must
comply with local regulations. SPECIFIC HAZARD
• Has good rust protection, excellent FEATURES:
boundary and it does not contain sulfur, • The best choice in all
nitrates, mineral oils, or heavy duty salts. dedicated grinding applications.
• The one product designed to handle all • Specially formulated for high coolant flow
metalworking applications in the shop. operations when low foaming is critical.
(For dedicated grinding applications use • Formula has been enhanced to improve tool
GRINDZAL™). finish and provide superior rust protection.
• Does not interfere with magnetic
chucks, and is clear and clean allowing
greater visibility of your work piece.
• Biodegradeable and exhibits excellent
safety with ease of disposal. Must
comply with local regulations.
TAPZIT
A PURE SYNTHETIC LUBRICOOLANT
FOR TAPPING, DRILLING, REAMING
AND PROFILE MILLING.
UNIVERSAL PLUS™
One product for
LUBRICOOLANT FOR MACHINING all metals and Replaces
ALUMINUM AND EXOTIC MATERIALS. all applications. 1,1,1
FEATURES:
• An excellent choice of lubricoolant for
machining aluminum if you prefer to FEATURES:
use just one lubricoolant in all • Works by lubrication
your metalworking applications. and not by evaporation.
• Has good rust protection, excellent • Does not contain 1,1,1 -
boundary lubrication, and it does not trichloroethane, ethylene chloride,
contain sulphur, chlorine, nitrates, chlorine, sulphur, solvents or oils.
mineral oils, or heavy duty salts. • Easy to clean - merely
• Stable and odor free; non-smoking and rinse with hot water.
non-fogging in use, with no residual • Compatible with and readily
contamination of the work place. Will not dissolves in synthetic lubricants
attack paint, exotic metal, bearings or pumps. and adds to their properties.
• For dedicated grinding
applications use GRINDZAL™.
FLAMM ABILITY
1 Gallon Bottle 5 Gallon Pail 1 Gallon Bottle 5 Gallon Pail
Part No. 1-123-105 Part No. 1-123-110 Part No. 1-123-095 Part No. 1-123-100
HEALTH REACTIVITY
Our Net Price Our Net Price Our Net Price Our Net Price
SPECIFIC HAZARD $1912 $9235 $2196 $10475
SUPER TAPZIT™
HP COOL PURE SYNTHETIC TAPPING COMPOUND FOR
PURE SYNTHETIC HIGH PRESSURE STAINLESS & OTHER EXOTIC MATERIALS.
MACHINING LUBRICOOLANT
FEATURES: FEATURES:
• Specifically designed for high pressure • Advanced formulation with added
applications in machining centers. lubrication can handle tapping and
• No foam buildup at drilling in your toughest applications.
pressures over 1500 psi. • Works by lubrication and does not evaporate.
• Excellent in chip evacuation. • Compatible and readily dissolves in synthetic
• Great in through spindle lubricants and adds to their properties.
machining centers. • Does not contain 1,1,1-trichloroethane,
• Dilution ratio is from 7% to 15%. ethylene chloride, sulphur, solvents or oils.
• Water soluble (100% water soluble). • Apply directly from the
container. DO NOT DILUTE.
FEATURES:
• The best choice in high speed
CNC machining operations.
• Handles the toughest FEATURES:
metalworking applications, even in 1 Gallon Bottle • Designed for all cutting and turning 1 Gallon Bottle
the most severe shop environments. Part No. 1-123-175 applications where a soluble oil is desired. Part No. 1-123-185
• Provides extended tool life • An excellent choice of machining materials such
through increased lubrication, Our Net Price as Titanium, Iconel 718, Rene 41, Waspalloy, Our Net Price
including exotic and hard to
machine materials.
$2043 Cobalt based Super Alloys, Aluminum, Stainless
Steel and other Aerospace materials.
$2130
• Decreases down time cleaning • Very compatible with all machining applications.
the machine which allows you to • Exceptionally good bacteria and mold
5 Gallon Pail control ensure a long life and minimize 5 Gallon Pail
maintain higher productivity.
• Advanced formula increases sump Part No. 1-123-180 the use of other additives. Part No. 1-123-190
life, providing low foaming Our Net Price • Outstanding lubricity and corrosion control Our Net Price
characteristics and gives excellent
visibility of workpiece at all times. $9840
with EP additives provide long tool life.
$10320
KBC TOOLS &
Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com MACHINERY
342 fluids • CUTTING FLUIDS
Thread cutting oil cools threads and pipe A premium quality water soluble
during operation, and speeds metal removal. oil with dilution ratios up to 50:1.
Cutting oils are free of chlorine and other Uses: Recommended for a wide
halogens, PCBs and heavy metals. range of machining applications
in the turning, milling and grinding
Nu-Clear - Clear mineral oil with low odor and of steels, cast iron, aluminum and
anti-mist formulation. Special low temperature copper alloys.
properties maintain workable viscosity to -20°F.
Dark Oil - Traditional mineral oil
with low odor and anti-mist formulation. Part No. Our
Stainless Steel Oil - High performance mineral oil formulated Size 1-123- Net Price
to produce superior threads on stainless steel and black pipe. 1 Gallon -26090 $27.49
Water Washable - Synthetic thread cutting fluid cleans easily 5 Gallon -26091 123.78
off concrete, clothing, and piping with water. Biodegrable.
Nu-Clear Dark Stainless Steel Water Washable*
Size
U.S.
Part No. Our Part No. Our Part No Our Part No. Our
1-551- Net Price 1-551- Net Price 1-551- Net Price 1-551- Net Price
CIRCLE CUT #729
1 Quart* -41565 $11.05 -41590 $9.75 -74007 $12.80 -74017 $16.85 Universal Cutting Oil
1 Gallon -70835 21.00 -70830 19.30 -74012 28.35 – –
5 Gallon -41575 99.90 -41600 81.70 -74047 128.75 -76772 162.95
Precision
* WHILE SUPPLIES LAST. Metalworking
Without The Stink
Or The Rust!
Cutting Oil FEATURES:
BY AERVOE INDUSTRIES
• Contains no sulfur and no chlorine.
• It is a pleasant amber color
An all-purpose, solvent-based lubricant and and is essentially odorless.
coolant for industrial cutting operations. • Longer cutter life.
FEATURES: • No rotten egg sulfur smell.
• Reduces wear. • No chlorine staining or rusting.
• Great for soft or hard metals. • Works at high speed & low speed.
• Make clean cuts. • Viscosity is SUS @ 100°F.
10.5 oz. Aerosol 1 Gallon 140 Viscosity 200 Viscosity 350 Viscosity
Part No. Part No. Part No. Part No. Part No.
1-125-7020 1-125-7020G 1-820-72900 1-820-72920 1-820-72935
Our Net Price Our Net Price Our Net Price Our Net Price Our Net Price
$686 $3196 $2196 $2196 $2040
TAPFREE 2, TAPFREE Makes Tough Alloys Tap, Drill or Ream Like Mild Steel.
Mist or Flood
Coolants
Formula 77 for Tougher Service
TRI-COOLTM TC-1
Premium Synthetic For Mist and Flood Cooling. Highly recommended
where tougher machining conditions require
Coolant greater lubricity, where material is very abrasive,
or tool pressure is exceptionally great.
TC-1 is a highly concentrated premium
synthetic water soluble coolant formulated
to exceed the demands of spray and flood Formula 77 Formula 77
cooling. It contains a non-chlorine extreme 1 Gallon (In Plastic Bottle) 5 Gallon Pail
pressure additive for improved tool and Part No. 1-437-771 Part No. 1-437-775
surface finish. TC-1 prevents rusting on Our Net Price Our Net Price
tool and surface finish. It contains a broad
spectrum biocide/fungicide for protection $3600 $16800
against growth. TC-1 is non-toxic,
non-flammable, and biodegrable. Concentrated. 1 gallon
makes 33 gallons.
1 Gallon 5 Gallon
Formula 78 for Light Duty Service
Part No. Part No. ECOLOGICAL
LY
For Mist Systems. Chemical Formula 78 Formula 78
1-439-30656 1-439-30657 SAFE base mist coolant that 1 Gallon (In Plastic Bottle) 5 Gallon Pail
Our Net Price Our Net Price dissolves in water to a Part No. 1-437-781 Part No. 1-437-785
clear solution. Meets OSHA
$3225 $15290 standards. Clings to the tool Our Net Price Our Net Price
to reduce friction. $3500 $16200
M-16 Mist
Coolant Fluid
FEATURES:
• Increases tool life. Tapmatic®
• For machining and tapping.
• No-fogging, odorless. Edge Lube
• Contains rust preventatives.
13 oz. Tube
Edge Lube is a biodegradeable, solid, Part No.
1 Gallon Bottle 5 Gallon Pail white, waxy bar for lubricating rotating or
1-444-43200
Part No. 1-541-707 Part No. 1-541-708 stationary cutting tools, grinding wheels
or belts. Edge Lube extends grinding Our Net Price
Our Net Price Our Net Price wheel life and eliminates heat build-up
$1677 $8320 and belt loading. It is safe on all metals. $1381
An All-Purpose Lubricant
for Belts & Discs! FEATURES:
• Adds longer tool
Regular-type polishing life to saw teeth.
wheel grease sticks are • Specially formulated
purposely made of high for metal saw application.
melting point greases, • Anti-heating properties in
but abrasive belts run so cool that these types the formulation work by keeping
of greases have a tendency to form a “gummy” the wax on the saw blade, reducing the tendency for spin-off. Safety
surface referred to as “loading” or “glazing”. The • Prevents burning, clogging, chatter and tearing. Grip
use of No. F-26 on belts and discs prevents • Works well on all non-ferrous and ferrous materials. Handle!
this. It is a light-bodied grease - that spreads • Water soluble, non-toxic, non-irritating and biodegradable.
out thinly - remains “wet” on the belt - and • "Safety-Grip" fiber tube with extended hollow end allows operator
provides lubrication by penetrating the coated 2-1/2" x 8" Stick
to hold and push the wax against the saw safely.
abrasive surface. Prevents clogging and leaves Part No. 1-442-F26
the abrasive grit free to cut clean and smooth. Our Net Price USES: • Tapping
F-26 is recommended for all belt polishing • Band Saws • Grinding 2" x 12" Tube
operations - on all metals, plastic and glass. $475 • Circular Saws • Filing Part No. 1-443-6056
• Carpenter Saws • Cutting Our Net Price
• Hack Saws • Metal Spinning
FREE Quart of Tri-Cool Coolant included! • Drilling • Polishing $940
Handy,
Type “DL” Spray No Mess
Lubrication
Cooling Unit in a Tube!
Mounts anywhere. Simply hook up Multi-Purpose
to shop air, drop the siphon line
into coolant and you're ready to Lubricating Wax
go. Features solid brass valve
body with adjustable needle valve, FEATURES:
sturdy magnetic base, 7" flexible • Reduces binding and friction when drilling,
nozzle and 7 ft. siphon line with grinding, band sawing, belt sanding or tapping.
stainless steel filter. • Specially formulated lube wax is
biodegradable, non-toxic and non- Part No.
Part No. 1-439-30655 staining, so it can be used anywhere. 1-442-21121
Our Net Price • Easy to use push up stick! Our Net Price
• Ideal for shop or home use, for
$8250 anything that moves or rubs together! $430
KBC TOOLS &
Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com MACHINERY
344 fluids • METALWORKING FLUIDS
Rustlick dielectric oils EDM-30 Low viscosity; for use with paper cartridge filters. Part No. Our
prevent filter clogging, Size 1-122- Net Price
last longer, and produce Rustlick EDM-30 is a high quality oil with a low viscosity that allows for faster setting and produces a 5 Gallon -72052 $119.00
finer finishes. smoother, more polished finish. EDM-30 lessens the smoke and odor that can occur during processing. 55 Gallon -72552 989.00
Machining Coolant
Synthetic PowerChip 2000 SN-100A Part No. Our
Size 1-122- Net Price
Metalworking Premium heavy-duty 5 Gallon -73058 $125.00
synthetic metalworking Superior moderate to heavy-duty 55 Gallon -73558 1165.00
Coolant fluid with non-chlorinated synthetic metalworking fluid.
EP additives.
Versatile, medium/heavy-duty synthetic fluid formulated to meet critical
For machining, grinding, performance requirements while providing easy disposability. A transparent
and sawing of all metals. solution when diluted, resists bacteria and fungal growth, rancidity and
Its exceptional biostability unpleasant odors. Contains proprietary extreme pressure lubricants and
provides long-term sump life corrosion inhibitors that improve tool/wheel performance during cutting and
when properly maintained, grinding operations. It also contains additives to protect brass, bronze and
and the addition of a copper fitting on the machine from corrosion. Excellent for use on most metals,
non-chlorinated E.P. package although with some grades of aluminum staining can occur depending on
provides extended tool life. Works well in hard-water service conditions. SN-100A does not contain chlorine, active sulfur or phenols.
environments and its transparent solution allows for
Synthetic metalworking fluids easy viewing of workpiece. Excellent rust protection and
are formulated from soluble minimal foaming. Superior way-lube rejection, leading Part No. Our
synthetic lubricants to be low to cleaner coolant and longer sump life. Good for ferrous
VYTRON-N Size 1-122- Net Price
maintenance, offer great metals especially titanium, inconel, stainless steel. 1 Gallon -75014 $27.75
protection against bacteria Suited for hard to machine aluminum and other alloys. Superior general-purpose 5 Gallon -75054 111.00
and fungus, and reject tramp synthetic metalworking fluid. 55 Gallon -75554 979.00
oil for easy cleaning. They Part No. Our
provide exceptional cooling Size 1-122- Net Price Setting the standard for over 20 years, Vytron-N is intended for use on ferrous
and rapid fines settling 5 Gallon -76305 $151.00 metals only. It has superior rust-inhibiting capability and prevents sump rancidity
for extended tool life and 55 Gallon -76355 1399.00 for up to a year or more. It is biodegradable for easy and inexpensive disposal.
improved finishes.
For surface grinding applications. It is non-foaming, transparent, With an extremely attractive per-gallon cost, our
biodegradable, and allows for the rapid settling of residues, which most economical grinding fluid. It is compatible
eliminates wheel build-up and ensures finer finishes. Compatible with brass, bronze and ferrous metals, making it Part No. Our
with brass, bronze, copper, and ferrous metals. Excellent coolant suitable for Blanchard grinding. Provides excellent Size 1-122- Net Price
for Blanchard Grinding. Provides excellent corrosion protection corrosion protection and is ideal for use in machines 5 Gallon -73562 $69.00
and is ideal for use in machines with magnetic brass rings. with brass magnetic rings.
Drum
Mixer
These sturdy, corrosion-resistant mixers are
used to automatically dilute and mix coolant
concentrates with the proper amount of water.
Comes with a series of color coded inserts Economy
(proportioning valves), each of which deliver
a specific dilution ratio: 30:1, 20:1, 10:1, etc.
Drum Mixer
FEATURES:
FEATURES: • 30 day warranty.
• Ensure proper mixture everytime. • 48" discharge tube.
• Eliminates the concern of too • 14 metering tips included
rich/too lean a concentration. for concentrations of 1%
• Eliminates messy spills. to 20% (ratios 4:1 to 99:1).
• Maximum viscosity of 500 SUS. Model MIX05120
Part No. 1-122-78096 • Check valve for precise mixing. Part No. 1-122-030
Our Net Price • Works on barrels or totes. Our Net Price
• 4.8 gallons per minute capacity.
$14900 • In/out 1/2" NPT fittings. $11200
KBC TOOLS &
Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com MACHINERY
346 fluids • COOLANT MAINTENANCE PRODUCTS / SKIMMERS
SPECIFICATIONS:
Oxygenator™ to spoil. Injecting oxygen into the
coolant inhibits anaerobic bacterial
Access ................... 1/2" x 3" growth, extending coolant life.
Reach .............................. 8" Model ZVA8-08
Capacity .................... 1 qt/hr Part No. 1-122-016
Max. Temp. ................. 90°F Our Net Price
Application .............. Coolant
Material ................. Polyvinyl $31900 FEATURES:
Motor ... 100-120v, 50/60 Hz
• Extends coolant life.
• Eliminates foul odors.
• Maintain high oxygen levels.
• Industrial-grade bronze air diffuser.
Belt • Fuel-grade tubing.
FEATURES:
Floating tramp oils seal air from coolants in a sump, providing an • Thermal overload motor, automatically
ideal breeding place for the microorganisms that cause rancidity with resets to normal operating temperature.
its foul odors and rust problems. Remove the oils and you'll dramatically • Removes up to 1-1/2 gallons
prolong coolant life. With Rustlick Wheel Skimmers, this can be done of tramp oils per hour.
easily, automatically and inexpensively. • Eliminates “smoke” from burning oils.
• Low power consumption; 115 VAC.
A unique versatile
Plastic Frame plastic molded design! STEEL FRAME SKIMMERS
FEATURES: Size Part No. Our
Diameter 1-122- Net Price
• Universal injection molded frame that o
accepts both 12" and 18" wheels. Standard 140 F Models
• Easy to install and convert wheel. 12" -78012 $235.00
• Removes up to 1.5 gallons 18 -78018 265.00
of tramp oil per hour. o
HiTemp 210 F Model
• Exclusive bi-directional tramp oil drains.
• Chemical resistant frame and wheel. 12" -78013 325.00
• Smaller foot print than conventional 18 -78019 375.00
wheel skimmers making it easier
to fit in most sumps.
• 120V, Single Phase, Replacement Description
Part No.
1-122-
Our
Net Price
50/60 HZ, .6 AMP.
Parts 12" Wheel w/hub -78055 $35.00
12" Plastic Frame Universal Skimmer 12" HT* Wheel w/hub -78060 129.00
Part No. 1-122-78034 18" Wheel w/hub -78065 45.00
Parts are interchangeable 18" HT* Wheel w/hub -78070 179.00
Our Net Price on both steel and plastic Wiper Blades (per pair) -78085 12.00
$189 00 frame wheel skimmers.
* High Temperature Design
L Series Disk
GS Series ®
Skimmer
Disk Skimmer C US
8" x 3"
A.
Muscle™ ATTACHMENTS:
A. Hammerhead™ Skimmer
Coalescers MODEL • Fits hard-to-access areas.
• Handles fluid
F15D
fluctuations up
to one foot.
Floating skimmer can handle up to 1 foot of fluctuation - • Floats easily, no
down to 2" of fluid, up to 1 foot high! The drum can be adjustments necessary.
entirely filled with coalescing medium - making it the most B. Sumpster™ Skimmer
effective coalescer in its price range - and competing • Handles a 3" level variation only.
with those costing hundreds of dollars more! • Skims without sucking air - great
for coolant with foaming problems. B.
SPECIFICATIONS: • The better option, if you have access! C.
Barrel: 15 gallons, 22" high, 17" diameter • Galvanized steel construction, precision formed hinge,
Pump: 1 gallon/minute, 4" high, 3" wide, 4" long and chip screen which prevents clogging hoses.
Intake hose: 48" long, 0.5" ID C. Fine Stopper
Discharge hose: 48" long, 1.25" ID • New integrated fitting makes them easy
Electrical: 110v 60Hz or 220v 50 Hz to handle and replace when the filter bag is full.
Maximum Temperature: 100°F • Discourages cleaning of the single use bags, ensuring
Shipping Weight: 28 to 31 lbs. ®
that your sump isn’t being re-fed a diet of fines.
C US
Model HR35
115V 1-Phase Motor
10-Gallon 16-gauge steel tank with baffle
to settle out chips and sludge.
Part No. 1-440-HR351 Tank
Our Net Price
LARGER
SIZES
$25600 Model 11-HR35, 1/25
HP(1500 RPM) Pump
ALSO Length of Shaft ........... 8"
AVAILABLE Typical coolant
HP ........................... 1/25 applications including
PLEASE RPM ....................... 1500
INQUIRE small abrasive cut-off
Weight ................. 15 lbs. machines, hand saws,
toolroom mills and
small lathes. For
Model HR45* viscosities to 150 SSU.
115V 1-Phase Motor System includes: 4’ of
Part No. 1-440-HR451 1/2" ID neoprene hose,
Our Net Price 3/8" ID flexible metal
nozzle and valve,
HR45
$39100 2-section cover with
HR35 18-mesh screen bowl.
Length of Shaft .............. 8" 1/2" discharge pipe.
DISCHARGE: HP ................................ 1/6
1/2" NPT, horizontal from pump base. RPM .......................... 1725
Motors are totally enclosed or totally enclosed Weight .................... 30 lbs. RPM ....................... 1500
fan cooled. All Motors have permanently lubri- HP ........................... 1/25 115V 1-Phase Motor
cated bearings. 230/460 V., 3 Ph. 60/50 Hz. * WHILE SUPPLIES LAST. Weight ................. 30 lbs. Part No. 1-440-11HR351
motor mountings are NEMA C face. Approx. GPM (water) at
specified feet of head Our Net Price
Model HR35 (1500 RPM) - Offers the same general features and construction as
the model HR45 except HR35 has a 1500 RPM 1/25 HP shaded pole motor. HR35
6’ .................................. 8
8’ .................................. 5
$44600
Series can pump maximum viscosity of 150 SSU.
Models HR45 (1725 RPM) - Made of top quality gray iron. HR Series pumps are
widely used for circulating abrasives because of their wide clearances. Impellers are
open type with bottom suction and will pass abrasives and solids without binding.
17-Gallon
No bearings, packings or seals are in the liquid. There is no metal-to-metal rubbing
contact so wear is minimal. Maximum viscosity with HR45 is 500 SSU.
Tank
Model 17-FM68H, 1/6HP
5-Gallon (3450 RPM) pump.
Round The FM68H pump in
this unit delivers a
Tank substantially higher head
and greater flow. Used
on CNC lathes and many
Model 5HR35, 1/25 HP (1500 RPM) pump - Use similar machine tools.
with water soluble light cutting oils or solvents to Pump has an integral
150 SSU. For bench mills, tool grinders, single- 1/2" discharge through
spindle drill presses, small lathes and similar size the flange. Maximum
machines. Unit includes pump container, 4’ of 1/2" viscosity: 500 SSU.
ID neoprene hose, 1/4" ID flexible metal nozzle and Tank with this system
valve, 6’ cord, plug, switch, mesh screen bowl and is 16-gauge with 1
1/2" pipe. (Built-in switch on 115V motors.) baffle and 18- mesh
screen bowl.
1/2˝ NPT
4-1/8˝
RPM ....................... 1500 RPM ......................... 3450 115V 1-Phase Motor 230/460V 3-Phase Motor*
HP ........................... 1/25 HP ............................... 1/6 Part No. Part No.
Weight ................. 25 lbs. Weight ................... 70 lbs. 1-440-17FM68H1 1-440-17FM68H3
Approx. GPM (water) at 13-1/16˝ Approx. GPM (water) at
115V 1-Phase Motor specified feet of head. Our Net Price Our Net Price
specified feet of head.
4’ ................................ 10 Part No. 1-440-5HR35 12’ ................................ 14 $62200 $64600
6’ .................................. 8 Our Net Price 14’ ................................ 12
8’ .................................. 5 16’ .................................. 9
9’ .................................. 2 12˝ $34600 18’ .................................. 6 * WHILE SUPPLIES LAST.
Model 2E-NYS
Sacrificial Anode
Designed for submerged use only. This
pump is intended for use in U.L. listed
parts cleaners. Diecast aluminum pump WHILE
housing; nylon head, impeller & screen;
Viton® shaft seal. Hooded inlet; 1/4"
Submersible SUPPLIES
MNPT outlet. 1/2" MNPT conduit fitting Pump Accessory LAST.
around cord.
Model MCT-10
10-Gallon Tank Coil
Model MCT-10 Tank
Cleaning
Part No. 1-440-560300 Kit
Our Net Price
$36980
ORDER PUMPS SEPARATELY
KIT INCLUDES: 5 gallon polyethylene tank,
cover, baffle, 2-MD-SC magnet-driven pump
The Model MCT-10 10-Gallon Tank is A fast, inexpensive system for with mounting bracket, 18" of 1/2" Tygon®
compatible with pump model numbers “boiling out” coils. Ideal for tubing, and 10 ft. of 1/2" ID vinyl tubing.
3E-12N and 4E-34N Little Giant Pumps. compressor burnouts when and
where ordinary flush-outs cannot
Gallons Per Hour
remove the glue-like residue. It Pump @ 115 VAC 60Hz Shut
can be also used for water heaters, Model 1’ 5’ Off PSI
For use on medium size lathes, grinders, cut off machines, milling and drilling shell & tube heat exchangers, oil
machines using water soluble or light cutting oil. Includes 10-gallon painted metal supply lines to fuel oil heaters, GKPK-SC 310 285 14.6’ 6.5
tank with baffle which provides more setting capacity and coolant volume, 4’ neo- air conditioning coils and distillation
prene hose with brass nuts, metal flex nozzle and brass control valve. Removable process. Use coil cleaning Part No. 1-440-562660
chip collector tray and splash deflector. For use with cutting oils up to 300 SSU vis- compounds compatible with Our Net Price
cosity. This unit does not include a pump. The pump must be purchased in addition materials of construction of the 95
to this tank kit. 11-3/8"H x 10"L x 25"W Wt. 31 lbs. pump. Used with coil-cleaning acids. $276
3/8" Shut Off Valve For Models: 3/8" x 12" Coolant Hose 12" of 1/4" Flexible Plastic Hose 12" of 3/8" Flexible Plastic Hose
MCT-5P, MCT-10* For Model: MCT-10 For Model: MCT-5P For Model: MCT-10
Part No. 1-440-940010 Part No. 1-440-160306 Part No. 1-440-160413 Part No. 1-440-160414
* WHILE Our Net Price Our Net Price Our Net Price Our Net Price
SUPPLIES LAST. $1960 $2600 $2080 $3300
THE
Cold Gun Aircoolant NOW TWICPEOWER!
COOLING
System™
Replace messy mist systems - improve The Cold Gun is also an
dry machining with clean, cold air! alternative to expensive
mist systems. It eliminates
The Cold Gun Aircoolant System produces a the costs associated with
stream of clean, cold air at 50°F (28°C) below the purchase and disposal
supply air temperature. Operation is quiet and of cutting fluids and worker
there are no moving parts to wear out. It will related health problems
remove heat to prolong tool life and increase from breathing airborne
productivity on machining operations when coolants or slipping on
liquid coolants cannot be used. wet floors.
Manual Shut
Model 5215 Model 5230
Includes: Cold Gun, Single Off Valve,
Includes: High Power Cold Gun,
Point Hose Kit, 3/8" Cone Single Point Hose Kit, 3/8" Cone 1/4" NPT
Nozzle, 1-1/4" Fan Nozzle, Nozzle, 1-1/4" Fan Nozzle, Part No.
Manual Drain Filter Separator Automatic Drain Filter Separator 1-541-9012
Part No. 1-541-5215 Part No. 1-541-5230 Our Net Price
Our Net Price Our Net Price $17.00
00
$272 $31900
MODEL
A-1001-DLX
TYPHOON Universal
Spray Mist System MODEL
B-2002-MAG
FEATURES:
• Air & liquid adjustments are made at mixing block.
• Spray mist can be directed to any desired position
and will remain there until you move it.
• Air and liquid hoses connect to the back
of the Typhoon and are out of the way.
• Can be used as a tapping head stop by
inserting a 1/4" dia. rod in one of the Part No. Our
Model Description 1-541- Net Price
access holes provided in the unit.
• Installs quickly and easily underneath A-1001-STD Single Spray Standard -700 $64.94
the quill handle on the return spring housing with A-1001-DLX Single Spray w/Valve -701 90.94
the two screws supplied. B-2002-MAG Single Spray w/Magnetic Base -702 77.94
• Once installed the Typhoon becomes part of the B-2002-DLX Single Spray w/Mag. Base & Valve -703 103.94
FOR BRIDGEPORT TYPE MILLS machine and is ready for use in an instant. DLX-VALVE Flip Flow Valve w/Filter -705 33.74
AQUAFLO
Coolant
Dispenser
MINICOOL
Cooling Comes with bracket for fast
attachment onto any 1/4"
System diameter fitting on your
machine tool!
Model MC1700
Part No. 1-457-1700
Our Net Price
$8106
Uses the VENTURI principle to spray FEATURES: FEATURES:
an air & liquid mixture. It consists of • Strong magnetic base. • One-knob control - instantly
the following basic elements: A control • Separate on/off air and fluid controls. starts up and shuts down the unit.
valve, spray unit, air line, syphon line • Stainless steel armoured • As little as 25 PSI air supply operates Aquaflo
and a powerful on/off Popeye magnet, syphon hose and air hose. efficiently. Simply attach airline to standard Part No. 1-439-14014
which has a “V” form base, making it • Nozzle, connected via threaded fitting supplied with unit and drop Our Net Price
possible to mount on non-flat surfaces. Loc-Line® flexible hose. supply line into any container with coolant in
Enables the use to easily control both • Simple, inexpensive, rugged. your shop. No special tank required. $4250
the air flow rate an liquid rate. • Single spray unit. • Quick and easy mounting.
General Purpose
Models w/ Stainless Tank No. of Part No. Our
Capacity Outlets 1-437- Net Price
FEATURES:
• 4' nylon braided coolant line.
Steel Tanks 1 Gallon 1 -100N $138.00
• 5/16" D x 6" L brass nozzle. 1 Gallon 2 -102N 198.00
• Completely portable. 3 Gallon 1 -350N 166.00
• Output from each nozzle is regulated by a single knob on the control. 3 Gallon 2 -352N 229.00
• Mist spray may be turned on or off instantly to coordinate with the
cutting cycle, and the spray mix made lean or rich as needed.
OPTIONAL ACCESSORIES:
Starter Special Model 500
Part No. Our
INCLUDES: Part No. Description 1-437- Net Price
• One Model 100N mist coolant system Magnetic Nozzle Positioner -205 $29.00
with one gallon stainless steel tank. 1-437-500
• One adjustable magnetic nozzle positioner. Our Net Price 4’ Coolant Line - Nylon Braid -MCL4 46.00
• One gallon formula 78 concentrated coolant. Valve Stem -10VS 14.00
• One sample formula 77 concentrated coolant. $20200 Valve Block -10B 43.00
A siphon-type
Li'l Mister spray coolant
system.
PORTaMIST Kit Designed for light duty machining operations and
use on non-production machines, the Trico Li'l
INCLUDES: Mister® offers the most inexpensive introduction
• One PORTaMIST Model 60M unit including to the advantages of spray cooling.
air and coolant hoses, heavy duty magnetic
base, simple single knob control, and ONE QUART CAPACITY RESERVOIR:
12" flexible LOC-LINE® positioner. • Independently controlled air & coolant.
• One gallon Kool Mist Formula • Flexible reinforced plastic hose.
78 concentrated coolant. • 1/4" NPT air inlet fitting.
• One four-ounce sample of • Precision needle valves.
Formula 77 concentrated coolant. • Liquid level indicator.
Part No. Our
Part No. 1-437-560 Capacity Lines 1-439- Net Price
Our Net Price 1 Qt.* 1-5 Ft. -30540 $139.70
1 Qt. 1-5 Ft. -30541 155.70
$14100
* HAS PLASTIC LINE
SprayMaster® II
SPRAY COOLANT SYSTEM
SprayMaster® and
SprayMaster® SS The Trico SprayMaster II® is
the premier siphon system today.
The Trico SprayMaster® is one of Modern tooling techniques require
the most popular units in the field that coolant be delivered to the
today. Its attractive appearance, cutting tool before it enters the
heavy-duty nozzle and economical workpiece. SprayMaster II®, with
price are some of the reasons so its fast acting solenoids responds
many people choose this model. It instantly to the command, and can
is suited for a wide variety of metal easily be interfaced with NC/CNC
removal operations. Large one (1) controls for automatic operation.
gallon capacity reservoir. Foot, remote or limit switch
accessories are also available
Capacity Lines Part No. Our FEATURES: for ease of operation.
(Gallon) (Armored) 1-439- Net Price • Precision brass needle valves.
1 1-5 ft. -30542 $181.30 • Independent air and coolant controls. Capacity Lines Part No. Our
1 2-5 ft. -30543 261.90 • Easy-red liquid level gauge. (Gallon) (Armored) 1-439- Net Price
1* 1-5 ft. -30548 255.10 • 5 ft. of armored cable nozzle. 1 1-5 ft. -30458 $456.60
1* 2-5 ft. -30549 342.50 • Two line availability. 1 2-5 ft. -30459 590.80 With 7" stay put flexible nozzle
* Stainless Steel.
MICRO-DROP®
Lubricants
Micro-Drop® Model
LY
MD-1200 Dispensers GICAL
ECOLOAFE
In your fight for more efficient metal working, S
you need to eliminate the effects of heat on
tools, parts and machine maintenance. You
need the MD-1200 MICRO-DROP system Either of the two lubricants
from Trico. It prevents damaging heat are ideal for sawing, milling,
from forming by strategically dispensing drilling, tapping or grinding
small amounts of MICRO-DROP lubricant on ferrous and non-ferrous
to the tool. This extends tool life, protects metals.
part quality and eliminates the problems of
waste disposal, operator exposure and sump
maintenance associated with flood cooling. It also
provides higher material removal rates, improved
part finish, longer tool life and tighter dimensional Dual Line Unit
tolerances than dry machining. Typical applica- Single Line Unit
tions use only 1oz. of lubricant per 8-hour shift. with 18" Loc-Line Nozzle with 18" Loc-Line Nozzles
The MD-1200 system also saves you time by fea- Part No. 1-439-30801 Part No. 1-439-30802
turing easy-to-use controls with no confusing timer Our Net Price Our Net Price
to set. The positive pressure design provides MD-7 ADVANCED SYNTHETIC
instant fluid delivery for faster cycle times. Its liq- $50760 $61020 Part No. Our
uid scale, calibrated in drops per minute, allows Size 1-439- Net Price
repeatable set-ups and saves time in adjusting Quart* -30661 $18.11
flow rates for different applications. And, its high Gallon -30659 85.70
energy nozzle eliminates fogging for a cleaner Magnetic Back 5 Gal. -30662 411.40
environment and greater chip clearing power. Mounting Kit
Includes (2) * WHILE SUPPLIES LAST.
SPECIFICATIONS: 60 lbs magnets and
Delivery Lines ............................ 6 Ft. polyurethane mounting hardware
Liquid Flow Range ..................... 2-16 drops/minute Part No.
Inlet Air Pressure ...................................60-125 PSI MD-1 VEGETABLE BASED
Air Consumption ................................. 1.7 CFM/line 1-439-30687 Part No. Our
Air Inlet Fitting .......................................... 1/4" NPT Our Net Price Size 1-439- Net Price
Dimensions ................. 7.06"H x 10.09"W x 7.06"D $2800 Gallon -30648 $87.80
Reservoir Capacity ....................................... 16 oz. 5 Gal. -30647 430.70
CEDARBERG Magna-Flow
Type B-Dual Efficient air/liquid flow control that
delivers air / coolant where it's needed.
Valve Control
FEATURES:
Each outlet is equipped with • Fully assembled with 9"
two separate valves. One hose lengths and 1/8" nozzles.
regulates the air supply - the • Flow control valve allows convenient
other the coolant supply, making air/coolant adjustment near work.
it possible to obtain a very small, • Barbed connection easily adapts to regulated
extra fine spray or a maximum shop air or machine coolant pump.
discharge as desired. When the • Magnetic base (38 lb. pull)
coolant valve on this model is holds unit firmly in position.
closed, compressed air can • Made of high quality non-corrosive materials.
only be discharged for cooling
or blowing chips away.
Single Pack Dual Pack
Capacity No. of Part No. Our Part No. 1-835-262 Part No. 1-835-263
(Gallon) Outlets 1-439- Net Price Our Net Price Our Net Price
5 1 -30550 $187.90
5 2 -30551 288.60 The most popular model! $3791 $4263
JIFFY JETTM
Press-In
Coolant
30 Lb.. Pull Nozzle
Magnetic
FEATURES:
Nozzle • Just drill and ream a hole, press it in, and
Part No.
Holder 1-439-30460
you've got an easily aimable coolant nozzle.
• Ideal for special tooling, VDI holders,
Our Net Price CNC lathe tooling. screw machines, etc.
• Rated to 150 psi max.
$3630 • ±35° of adjustment either side of centerline. A B
TURRET JETTM
IA
"B"
D
Universal DIA
"
"D
Coolant Nozzle
FEATURES: "A"
• Full hemisphere of adjustment.
• Adjusts easily for accurate
coolant placement.
• Difficult to accidentally knock "E" NPT
FEATURES: out of adjustment.
• Rated to 100 psi max. • Improves chip control.
• Fits NPT and BSPT threads. "C"
• Increases tool life.
• Stays put, doesn't vibrate out of place. • Reduces setup time.
• Aimable from zero to ninety degrees with 360° sweep. • Maximum pressure 150 PSI.
• No interference problems with clamps, fixtures or swarf.
• Adjusts from full shutoff to fine fan spray to direct stream. Dimensions
Size Part No. Our Net
(E) (A) (B) (C) (D) 1-541- Price/Ea.
Size Dimensions Part No. Our
(A) (B) (C) (D) (E) (F) 1-541- Net Price 1/8 NPT/BSPT .82" .63" .50" .11" -070 $9.59
1/4 NPT/BSPT .94 .75 .63 .15 -075 10.15
1/4 NPT/BSPT 1.50" 1.70" 0-90° .44 .625 -085 $28.08 3/8 NPT/BSPT 1.13 .88 .75 .22 -080 11.23
CEDARBERG
MALE HOSE TO
FEMALE PIPE &
HOSE SAE FLARE
ROUND SEGMENTS NUT ADAPTERS
Adjustable Coolant
Hose System
THE ORIGINAL
MODULAR HOSE SYSTEM!
FEATURES:
• Loc-Line® is fully hand-adjustable in
both position and length.
• Loc-Line® will stay in position without any
springback. Creep due to machine
vibration is eliminated.
• Loc-Line® is electrically non-conductive.
It is ideal for use as an EDM flushing hose. 1/4" ID SYSTEM
Part No. Our
Description 1-836- Net Price
1/4" Hose Kit: 13" Length with fittings:
(2) 5-3/4" Segments; 1/16, 1/8 & 1/4" Nozzles; -40413 $8.16
HOSE Y FITTING 1/2 TO 1/4" 1/8 & 1/4" Male NPT Connectors
SEGMENT REDUCER 1/4" Hose Segment Pack (2 - 5 3/4" segments) -41401 6.14
1/4" Hose - 25 ft. Bulk Box -49420 135.20
1/4" Hose - 50 ft. Coil -49421 270.40
ROUND DOUBLE 1/16" Round Nozzle Pack - 4 pcs. -41402 4.06
1/2 TO 1/4" 1/8" Round Nozzle Pack - 4 pcs. -41403 4.06
NOZZLE SOCKET ADAPTER 1/4" Round Nozzle Pack - 4 pcs. -41404 4.06
1/8" NPT Connector Pack - 4 pcs. -41405 4.06
1/4" NPT Connector Pack - 4 pcs. -41406 4.06
NPT SOCKET 1" Flare Nozzle Pack - 2 pcs. -41407 6.14
CONNECTOR TO FEMALE MALE 1" Flare Nozzle Pack - 20 pcs. -49427 43.47
NPT NPT 1/4" Y Fitting Pack - 2 pcs. -41408 6.14
VALVE 1/4" Y Fitting Pack - 20 pcs. -49428 43.47
1/4" Double Socket Pack - 4 pcs. -41409 4.52
IN-LINE 1/4" Socket to 1/8" Female NPT Pack - 4 pcs. -41411 5.15
FLARE VALVE 1/4" Male NPT Valve Pack - 2 pcs. -21192 10.24
NOZZLE 1/4" Female NPT Valve Pack - 2 pcs. -21193 10.24
FEMALE 1/4" In-Line Valve Pack - 2 pcs. -21194 10.24
NPT
VALVE 1/2" ID SYSTEM
Part No. Our
Description 1-836- Net Price
1/2" Hose Kit: 13" Length with fittings:
Assembly (2) 5-3/4" Segments; 1/4", 3/8 & 1/2" Nozzles; -50813 $9.20
3/8 & 1/2" Male NPT Connectors
Pliers 1/2" Hose Segment Pack (2 - 5 3/4" segments) -51801 6.92
1/2" Hose - 25 ft. Bulk Box -59860 160.16
Loc-Line® Assembly Pliers make it 1/2" Hose - 50 ft. Coil -59861 320.32
easy to snap together Loc-Line® Hose, 3/8" Round Nozzle Pack - 4 pcs. -51802 4.63
especially when your hands are slip- 1/2" Round Nozzle Pack - 4 pcs. -51803 4.63
pery. They also make it easy to 3/8" NPT Connector Pack - 4 pcs. -51804 4.63
assemble in hard to reach places. 1/2" NPT Connector Pack - 4 pcs. -51805 4.63
1-1/4" Flare Nozzle Pack - 2 pcs. -51807 6.92
1-1/4" Flare Nozzle Pack - 20 pcs. -59867 48.05
Part No. Our 1/2" Y Fitting Pack - 2 pcs. -51808 6.92
Size 1-836- Net Price 1/2" Y Fitting Pack - 20 pcs. -59868 48.05
1/4" -78001 $11.39 1/2 to 1/4" Adapter Pack - 2 pcs. -51821 5.10
1/2" -78002 11.39 1/2 to 1/4" Adapter Pack - 20 pcs. -59869 43.47
1/4 & 1/2" -78003 20.54
1/2 to 1/4" Reducer Pack - 2 pcs. -51822 6.92
2-1/2" Flare Nozzle Pack - 2 pcs. -51809 7.96
2-1/2" Flare Nozzle Pack - 20 pcs. -59871 52.62
1/2" Double Socket Pack - 4 pcs. -51811 5.15
Quick Set Shield 1/2" Male NPT Valve Pack - 2 pcs. -32092 12.53
Kits & Parts 1/2" Female NPT Valve Pack - 2 pcs. -32093 12.53
1/2" In-Line Valve Pack - 2 pcs. -32094 12.53
SHIELD YOURSELF
FROM CHIPS & COOLANT! 3/4" ID SYSTEM
Part No. Our
ALL QUICK SET SHIELD KITS INCLUDE: Description 1-836- Net Price
14" adjustable 3/4" Loc-Line® arm, 3/4" Hose Kit: 14" Length with fittings:
Magnetic base and fitting for fixed mounting. (2) 5-3/4" Segments; 5/8 & 3/4" Nozzles; -60513 $11.39
3/4" Male NPT Connector
3/4" Hose Segment Pack (2 - 5 3/4" segments) -61501 8.63
Part No. Our 3/4" Hose - 25 ft. Bulk Box -69540 187.20
Description 1-836- Net Price 3/4" Hose - 50 ft. Coil -69541 374.40
3/4" Round Nozzle Pack - 4 pcs. -61502 5.67
6" x 8" Quick-Set Shield Kit -60525 $29.69 5/8" Round Nozzle Pack - 4 pcs. -61503 5.67
7-1/2" x 10" Quick-Set Shield Kit -60526 31.98 3/4" NPT Connector Pack - 4 pcs. -61505 5.67
8-1/2" x 12" Quick-Set Shield Kit -60527 34.27
3/4" to 1/2" Adapters - 2 pcs. -61508 6.24
6" x 8" Replacement Shield -60528 7.96 3/4" to 1/2" Adapters - 20 pcs. -69548 49.87
7-1/2" x 10" Replacement Shield -60529 10.24 3/4" Y Fittings - 2 pcs. -61511 9.10
8-1/2" x 12" Replacement Shield -60530 12.53 3/4" Y Fittings - 20 pcs. -69551 68.17
3/4" Shield Mounting Elbows - 2 pcs. -60531 7.96 3/4" to 1/2" Y Reducers - 2 pcs. -61512 9.10
3/4" Magnetic Base -60532 13.68 3/4" to 1/2" Y Reducers - 20 pcs. -69552 68.17
3/4" Fixed Mounts - 2 pcs. -60533 6.14 3" Flare Nozzle - 2 pcs. -61507 9.10
3" Flare Nozzle - 20 pcs. -69547 68.17
Description
Part No. Our
1-836- Net Price Magnetic Base
1/4" Side Flow Nozzles* -41478 $6.55 Manifold Kits
1/4" End Caps - 4 pcs. -41480 4.06
1/4" End Caps - 20 pcs. -49447 16.02 MAGNETIC BASE MANIFOLD MAGNETIC BASE MANIFOLD
1/2" Side Flow Nozzles* -51836 7.40 SUPER KIT INCLUDES: KIT INCLUDES:
(8) 1/4" segments (2) 1/4" segments
1/2" End Caps - 4 pcs. -51838 4.63 (5) 1/4" MNPT valves
1/2" End Caps - 20 pcs. -59885 18.30 (1) 1/4" MNPT valves
(2) 1" flare nozzles (1) 1" flare nozzles
* WHILE SUPPLIES LAST. (2) 1/4" round nozzles (1) 1/4" round nozzles
(2) 1/8" round nozzles (1) 1/8" round nozzles
(2) 1/16" round nozzles, (1) 1/16" round nozzles
(1) magnetic base manifold (1) magnetic base manifold
(2) 1/4" plugs (3) 1/4" plugs
(1) 1/4" barb fitting (1) 1/4" barb fitting
Create-A Funnel
Flow Control System Thread
Adapter:
Avoid messy spills and wasteful overflow with the unique For use with
The funnel for one gallon
modular Create-A Funnel Flow Control System. Here in every use! containers.
one kit, is everything you need to make pouring
clean, safe, and easy. It's one kit no home
or shop should be without. Rigid Extension:
12" rigid extension
used in system for
FEATURES: difficult pouring jobs.
• Includes 6 interlocking flow control parts.
• Ideal for automotive, small engine,
household, and marine applications. The OilValve makes it simple and easy to add motor
• Simplifies even difficult pouring jobs. oil to cars, lawn mowers, chain saws, ATVs, and many
• Lets you measure, mix, and regulate flow. other types of equipment. Just screw the OilValve
• Includes a thread adapter for use onto a 1 quart plastic oil container, turn valve to the off
on one gallon containers. Flex Extension:
12" flexible position, place it in the filler hole and open the valve to
• Fits new 5 qt. oil bottles. extension used for pour. No spills, no drips, no puddles.
difficult pouring jobs.
Part No. 1-914L-CVK4 MiniSpout: Add to Part No. 1-914L-OVC
Our Net Price system when flow is ConvertaValveTM: MeasOr MixTM Funnel: Our Net Price
needed. Outlet Regulate flow from Measure liquid before
$1160 opening can be
enlarged as desired.
on to off, prevent
spills and overflows.
dispensing or accurately
mix fluids.
$150
FEATURES:
• Protect lubricants from contamination.
• Make the task of lubrication
easier, faster and safer.
• Minimize the risk of spills or accidents.
• See through graduated drums make
fluid levels easy to see and control.
• Color coded lids and drum labels
avoid misapplication of lubricant grade.
• Easy and convenient filling and dispensing.
• Range of spouts, hoses, and nozzles allows
easy filling to awkward points.
• Robust and UV stability with anti-static agents. Storage Lid - This compact
• All lids and drums are interchangeable. and durable lid allows pre-filled
drums to be easily transported
and stored.
Part No. Our
Description 1-439- Net Price Utility Lid - This multi-purpose
lid allows for rapid pouring of oils, FEATURES:
Storage Lid -31872 $16.80 making it ideal for topping off • Eliminates messy funnel storage.
Utility Lid -31873 19.40 machinery such as crankcases • Prevents dust, dirt and other contaminants
Mini Spout Lid -31909 39.30 or large engine blocks.
Stumpy Spout Lid -31870 44.30 from collecting on walls of funnel.
Stretch Spout Lid -31871 36.30 • Screw-on caps on both ends seal out harmful
1.5 Liter Drum -31928 10.70 Stumpy Spout Lid - Ideal for contaminants that may cause damage to mechanical
2 Liter Drum -31877 11.20 topping off engines, gearboxes systems and eliminates need for cleaning before use.
3 Liter Drum -31878 13.70 crankcases and other applications
5 Liter Drum -31879 16.10 where higher flow is required. Spout Part No. Our
10 Liter Drum -31880 34.50 Color Size Length O.D. 1-914L- Net Price
Oil Safe Pump -31874 63.80 Orange 1 pt. 8-1/2" 1/2" -CF115 $2.90
Stretch Spout Lid - Ideal for use
Stretch Spout Hose Ext. -31876 13.20 with lower viscosity oils or where Bright Red 1.5 qt. 17 1/2 -CF415 5.95
Stumpy Spout Hose Ext. -31875 19.10 precise pouring is required. Green 1.5 qt. 12-1/4 1 -CF428 5.95
Precision Oiler
FEATURES:
Extra Heavy Duty
• For the exact placement Pump Oilers
of oil or any other lubricant.
• For technicians, contractors, Part No. Our
hobbyists, and DIY'ers. Cap. Spout 1-914- Net Price
• Protective screw-on cover prevents leakage. 1 qt. 12" straight -120-A1 $23.75
• Smooth actuator allows for greater control 1 qt. 12" angle -120-A2 23.75
and placement of lubricant. 1 qt. 15" flexible -120-A3 23.75
• Generous reservoir. 1-1/2 pt. 10" straight -120-B1 22.85
• All aluminum construction. Part No. 1-805-589 1-1/2 pt. 10" angle -120-B2 22.85
Our Net Price 1-1/2 pt. 12" flexible -120-B3 22.85
• Convenient pocket clip. 1 pt. 8" straight -120-C1 22.25
• Overall length is 5-5/8".
• For use with lubricants only. $915 1 pt.
1 pt.
8" angle
10" flexible
-120-C2
-120-C3
22.25
22.25
REPLACEMENT SPOUTS
Pistol Pump Oilers Part No. Our Part No. Our
Spout 1-914- Net Price Spout 1-914- Net Price
15" flexible -301026 $4.85 10" straight -301013 $4.85
Part No. Our 12" straight -301012 4.85 10" angle -301016 4.85
Cap. Spout 1-914- Net Price 12" angle -301015 4.85 8" straight -301014 4.85
1/3 pt. 5" rigid ‘‘Plastic’’ -600-S $5.75 12" flexible -301025 4.85 8" angle -301017 4.85
1/3 pt. 6" flexible ‘‘Plastic’’ -606-S 6.45 10" flexible -301024 4.85
1/3 pt. 5" rigid -600 7.35
1/3 pt. 6" flexible -606 8.05
10 oz. 5" rigid -625 8.40
10 oz. 6" flexible -626 9.15
20 oz. 5" rigid -630 10.85
20 oz. 6" flexible -636 11.85
Junior Pump Oilers
Part No. Our
Cap. Spout 1-914- Net Price
3/4 pt. 8" rigid -700 $10.35
Spring Bottom Oilers 3/4 pt.
3/4 pt.
8" flexible
8" angle
-707
-720
10.35
10.35
REPLACEMENT SPOUTS
Part No. Our
Cap. Spout 1-914- Net Price Part No. Our
1/3 pt. 4-1/2" tapered Spout 1-914- Net Price
-505 $4.05
1/3 pt. 7" flexible -506 4.35 8" rigid angle -301162 $2.90
3/4 pt. 7" flexible -507 4.45 8" flexible -301164 2.90
3/4 pt. 4-1/2" tapered -510 4.35 8" rigid straight -301167 2.90
Manual Automatic
One-Shot One-Shot
Oilers Oilers
FEATURES:
• Perfect as replacements for
worn-out standard equipment oilers.
• The ideal way to incorporate a
lubricating device on your product. FEATURES:
• Any device that has sliding metal-on-metal contact • Supplies lube oil any time
surfaces should be lubricated with one of these pumps. machine is running, no need to
depend on machine operator.
• Clear plastic reservoir
Manual Lever Type shows oil level at a glance.
Part No. 1-456-025 • Connects to existing lube lines.
Our Net Price • Necessary upgrade when
installing CNC controls on
$5600 conventional machines.
• 110 volt.
85 (6 cc) 140
Manual 100 (8 cc)
Cyclic
Pumps 86 (6 cc)
110 (8 cc)
167 (6 cc)
190 (8 cc)
FEATURES:
• Outputs to 8 cc/stroke.
• Drop-in fill port keeps oil clean.
• Aluminum die cast reservoir provides long life. PM-10 Series
• Sight gage provides liquid level observation.
• Large fill port for easy adding of lubricant.
• Drop-in fill port keeps oil clean.
110
APPLICATIONS:
Are used in applications where a fixed output of
lubricant is desired. With the PM-10 series, the 80 136 MODEL PM-2000-R MODEL PM-1000-06
leverage of the pump handle enables the unit to
deliver higher pressure than most models, providing
the ability to lubricate points having some back Model CC per Discharge Res. Mount Part No. Our
pressure. With the PM-20 series, lubricant output Description No. Stroke PSI Capacity Position 1-439- Net Price
takes place upon release of the handle using spring Manual Piston Pump PM-1000-06 6 200 250cc Vertical -10006 $197.10
discharge to assure the correct amount of lubricant
is applied. These pumps are commonly used with Manual Piston Pump PM-1000-08 8 200 450cc Vertical -10008 197.10
meter units in single or multiple point applications. Spring Discharge PM-2000-L 8 50 550cc L. Hor. -2000L 197.10
Common applications include punch presses and Piston Pump* PM-2000-R 8 50 550cc R. Hor. -2000R 197.10
milling machines where infrequent but
reliable lubrication is required. * WHILE SUPPLIES LAST.
SPECIFICATIONS:
240
Reservoir Capacity ............................................................................................ 2 Liters
Pump Type ............................................................................. Spring Discharge Piston
Max. Pressure .................................................................................................... 40 PSI
Output Connection ....................................................................................... 5/16-24 (f)
MODEL PE-1002-05 Seals ................................................................................................................. Buna-N
Opto-Matic®
Constant
Level Oilers Opto-Matic® Plastic
Provides a constant level of oil in a pump bearing
housing, gear box, or other wet sump applications.
Reservoir Models
Glass reservoir provides long life in corrosive environ- FEATURES: WHILE
ments. Different reservoir capacities allow use in • Adjustable level setting allows SUPPLIES
many applications. use in many applications. LAST.
• Multiple air vent slots provide
FEATURES: proper functioning at all times.
• One piece glass reservoir ensures proper constant level • Side and bottom connections
function. There is no possibility of air leakage that for simplified installation.
would cause overfilling of the bearing housing. • High strength transparent, ribbed plastic reservoir
• Adjustable level setting allows use in many applications. provides long life and impact resistance.
• Multiple air vent slots provide for proper • Large surge chamber models prevents overflow
functioning at all times.
• Large surge chamber A of oil during machine start-up or shut-down.
helps prevent overflow A A
of oil during machine
start-up or shut-down.
• Side and bottom
connections for
MODEL 30003 simplified installation. MODEL 30064
B
B B
SPECIFICATIONS: SPECIFICATIONS:
C C
Max. operating......250°F Continuous Max. operating .......165°F Continuous 1-3/32" 1-3/32"
Reservoir ......One-piece Glass Bottle Reservoir....................Butyrate Plastic
Casting........................................Zinc Casting ..........................Zinc Die Cast
C Finish ......................Bright Zinc Plated
Finish ..................Zinc/chrome Plated
Internal parts ..........Zinc Plated Steel Internal parts............Zinc Plated Steel 3/4" 3/4"
7/8
Capacity Connection Dimensions (Inches) Part No. Our Type E Type EB
Dimensions (Inches)
(oz.) (NPT) A B Min. B Max. C Min. C Max. 1-439- Net Price Cap. Con. Part No. Our Part No. Our
4 1/4 2-11/16" 5" 5-3/4" 9/32" 1" -30003 $41.10 (oz.) (NPT) A B Min. B Max. C Min. C Max. 1-439- Net Price 1-439- Net Price
8 1/4 3-3/16 5-5/16 6-11/16 9/32 1 -30005 45.10 4 1/4 2-5/16 4-9/16 5-1/16 1/4 3/4 -30054 $25.30 -30064 $28.00
16 1/4 4-1/8 6-13/16 7-9/16 9/32 1 -30010 52.10 8 1/4 2-5/8 5-11/16 6-3/16 1/4 3/4 -30058 30.40 -30068 34.50
A A
Used to provide a controlled
amount of oil to a bearing or other
machinery part. The principle of
B delivery combines gravity feed
B
Vari-Feed with capillary action in the wick to
provide a constant feed rate of oil
Wick Oilers regardless of the fill level in the
reservoir. Feed rate is determined
FEATURES: 2-1/8" by the viscosity of the oil and the
• For use when continuous MODEL 30741 1-1/32" type of wick being used.
delivery is required. N NS
• Feed rate is constant and
adjustable by changing to Type N Type NS
Dimensions
a different wick. Capacity Connections Part No. Our Part No. Our
• 5 wick speeds available (oz.) (NPT) A B 1-439- Net Price 1-439- Net Price
and color coded for easy 1 1/8" 1-5/8" 1-5/8" -30711 $20.60 – –
replacement or installation. 1 1/4 1-5/8 1-5/8 -30712 20.60* -30812 29.70*
• Dust proof caps supplied. 2 1/8 1-15/16 2-5/16 -30721 24.60 -30821 34.40*
• Plastic reservoirs have 2 1/4 1-15/16 2-5/16 -30722 24.60 – –
reinforced ribs for long life. 4 1/8 2-5/16 3 -30741 27.30 -30841 37.00*
• Oil sights for visual 4 1/4 2-5/16 3 -30742 27.30 -30842 37.00*
indication of oil flow. 4 3/8 2-5/16 3 -30743 27.30 -30843 37.00*
• Copper brazing of all steel 8 1/8 2-5/8 4 -30781 32.80 -30881 42.60*
connections provides long 8 1/4 2-5/8 4 -30782 32.80 -30882 42.60*
life and leak proof design. 8 3/8 2-5/8 4 -30783 32.80 -30883 42.60*
• Zinc plating resists MODEL 30842
corrosion. * WHILE SUPPLIES LAST.
FEATURES:
• Glass lens for strength and durability.
• Vitron seal is compatible with many working fluids. WHILE SUPPLIES LAST.
• Plated steel body and retaining ring resist corrosion. FEATURES:
• Withstands pressures to 50psi and temperature to 300°F. • 1" NPT port for easy installation in ANSI and API pumps.
• Desiccant cartridges change color to indicate when replacement is required.
Dimensions Part No. Our • Cartridge replacement is simple and takes less than one minute.
Description A B C 1-439- Net Price • Engineered thermoplastic provides high temperature
1/2" NPT Viewport 7/8" 1/2" 1-3/32" -34305 $16.80 rating (325°F) and excellent corrosion resistance.
3/4" NPT Viewport 1-1/8 3/4 1-1/8 -34306 16.10 • Dual purpose - serves as a viewport and an air dryer.
1" NPT Viewport 1-3/8 1 1-1/4 -34307 16.50
Part No. Our
WHILE SUPPLIES LAST. Description 1-439- Net Price
1" NPT Air Dryer with Viewport -31807 $61.60
SPECIFICATIONS: 1/2" NPT Air Dryer without Viewport -31808 47.80
Body ............................................................................................. Zinc Plated Steel Replacement Cartridge -21841R 41.30
Retaining Ring .............................................................................. Zinc Plated Steel
Window ........................................................................................................... Glass
Max. Operating Temp ..................................................................................... 300°F SPECIFICATIONS:
Maximum Pressure ....................................................................................... 50 PSI Material ...................................................... Engineered Thermoplastic
Seal .................................................................................................................. Viton Maximum operating temperature ............................................... 325°F
* WHILE T1
Fittings SUPPLIES 90° ELBOW
LAST. Dimensions Part No. Our
T1 T2 1-439- Net Price
MALE THREAD CONNECTOR T1 T2 1/8 NPT 1/8 NPT -FE-1006 $7.70 T
T
2
Dimensions Part No. Our
T1 T2 1-439- Net Price
5/16-24 5/16-24 -FC-1002 $4.60
5/16-24 1/8 NPT -FC-1008 4.60 T1
FLOW DIRECTION
Relative
Meter
Flow
Rate
Flow
Delivery Typical System Type
Control
Units 3/0
00
4
8
Continuous Loss/Cyclic
Continuous Loss/Cyclic
Units
0 16 Continuous Loss/Cyclic
1 32 Cyclic Continuous Re-circulating
2 64 Cyclic Continuous Re-circulating
3 128 Cyclic Continuous Re-circulating
4 256 Continuous Re-circulating
5/16-24 x 5/16-24 5/16-24 x 1/8 NPT 1/8 NPT x 1/8 NPT 5/16-24 x 5/16-24 5/16-24 x 1/8 NPT 1/8 NPT x 1/8 NPT
Flow Part No. Our Part No. Our Part No. Our Instructions - Find the Flow Flow Part No. Our Part No. Our Part No. Our
Rate 1-439- Net Price 1-439- Net Price 1-439- Net Price Rate value for each lubrication Rate 1-439- Net Price 1-439- Net Price 1-439- Net Price
3/0 -DSM-3/0 $9.80 -DCM-3/0 $9.80 -DTM-3/0 $9.80 point. This corresponds to the 3/0 – – – – -DTC-3/0 $10.40
00 -DSM-00 9.80 -DCM-00 9.80 -DTM-00 9.80 flow rate values in the Meter 00 -DSC-00 10.40 – – – –
0 -DSM-0 9.80 -DCM-0 9.80 -DTM-0 9.80 Units chart. Select the mounting 0 -DSC-0 10.40 – – -DTC-0 10.40
1 -DSM-1 9.80 -DCM-1 9.80 -DTM-1 9.80 configuration best suited for 1 – – -DCC-1 10.40 -DTC-1 10.40
2 -DSM-2 9.80 -DCM-2 9.80 -DTM-2 9.80 the application. 2 – – -DCC-2 10.40 -DTC-2 10.40
3 -DSM-3 9.80 -DCM-3 9.80 -DTM-3 9.80
4 -DSM-4 9.80 -DCM-4 9.80 -DTM-4 9.80
FEATURES:
• Heavy duty variable stroke cast iron head.
• Heavy Duty rod, spring and follower.
• Filler nipple for 3-way loading.
• Rapid spin barrel threads for fast reloading.
12" Steel Braid • 4-jaw coupler with ball check. Model L1200
Rubber Grease Hose • Positive grip follower handle. Part No.
• Rugged baked enamel finish. 1-914L-L1200
with 4-Jaw Coupler • Deluxe air bleeder valve. Our Net Price
• Field repairable check valve.
25
FEATURES: Model L2205
• 360O adjustable rigid extension. $36
• Single braid grease hose.
• 3,000 PSI working pressure. Part No. 1-914L-L2205
• 12,000 PSI burst pressure. Our Net Price
• 1/8" MNPT threads. 65
$7 Lever Action
• For manual or air operated grease guns.
Grease Gun
FEATURES:
• 14 oz. cartridge capacity.
• Develops up to 10,000 psi.
• Heavy-duty heat treated spring
Deluxe Lubelink for consistent priming.
Accessory Kit • Plunger rod lock for easy loading.
• Air bleed valve to help priming.
• 4" straight metal spout with 4 jaw
KIT INCLUDES: heavy-duty coupler.
• 12" steel braid rubber
grease hose with spring Part No. 1-832-PT420
guard and 4-jaw coupler. Our Net Price
• 3", 90-degree needlepoint coupler.
• 9" rigid extension with 4-jaw coupler. $1050
• Right angle coupler, for work in tight places.
• Hypodermic needle coupler
for lubricating sealed bearings. Model L2550
• Straight needlepoint coupler, Part No. 1-914L-L2550 Pistol Grip
great for use on 4WD vehicles.
• Needlepoint coupler, right angle for high-pressure Our Net Price Grease Gun
fittings and damaged grease fittings. $9860
FEATURES:
• 14 oz. cartridge capacity.
• Develops up to 6,000 psi.
• Heavy-duty 12" whip hose and 6" metal spout.
• 4 jaw heavy-duty coupler is included with both
the whip hose and the metal spout.
Kurt Lube • Plunger rod lock for easy loading.
• Air bleed valve to help priming.
Disposable Grease Gun
2 oz. Capacity
FEATURES: Part No. 1-572-KLA Part No. 1-832-PT320
• Fits standard grease fittings. Our Net Price
• Easy, one hand operation. Our Net Price
• NLGI #2 grease. $1700 $1095
KBC TOOLS &
MACHINERY Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com
LUBRICATION PRODUCTS • fluids 365
1-7/8 APPLICATIONS:
MODEL GL-P These spring type lubricators control and dispense grease automatically,
to take the guesswork out of manual lubrication and extend bearing life.
2 The GL-P series has a clear, polycarbonate reservoir for easy viewing of the
Grease grease level in the reservoir. The sturdy, anodized aluminum base is ideal
Lubricators for demanding applications. The standard zerk fitting allows for easy refilling.
Light, medium, and heavy spring types are included with the GL-P.
The GL-M series incorporates a dual spring design to maintain a uniform
3 dispensing pressure of +/-6% throughout its operating range. Refilling
the reservoir is made easy with a standard zerk fitting. An external level
GL-M A indicator shows the level of grease inside the reservoir.
A
GL-P GL-P GREASE LUBRICATORS
Model Capacity Spring Dim. Part No. Our
No. Ounce NPT Force (A) 1-439- Net Price
MODEL GL-M NW50-33301 2-1/2 1/8 Any 4-1/2" -33301 $60.10
NW50-33303 2-1/2 3/8 Any 4-5/8 -33303 60.10
GL-P FEATURES:
• Anodized aluminum base resists GL-M FEATURES: GL-M GREASE LUBRICATORS
corrosion and works well in high • Double spring design for more Model Capacity Spring Dim. Part No. Our
vibration applications. uniform dispensing pressure (+/-6%). No. Ounce NPT Force (A) 1-439- Net Price
• Clear, polycarbonate reservoir for • External level indicator. NW50-33322 2-3/4 1/8 Medium 5-5/16" -33322 $33.80
easy viewing of grease level. • Can be mounted in any position. NW50-33326 2-3/4 1/4 Heavy 5-7/16 -33326 33.80
• Can be mounted in any position. • Easily refilled through the zerk fitting.
• Easily refilled through the zerk filling. • Excellent in high vibration applications. WHILE SUPPLIES LAST.
Streamliner V Automatic
Grease Dispenser
Variable feed rate with electro-chemical drive. Grease
FEATURES: Fittings STRAIGHT
• Auto purge cut-out. SHORT-
• Microprocessor control, Large LCD display. STRAIGHT
• Indication of operation with green LED. FEATURES: 45°
• Pre-filled with one of two standard grease types. • Complete with ball check.
• Transparent reservoir for easy viewing of grease level. • Steel fittings for use in automotive,
• Unit can be deactivated and adjusted as necessary. industrial and agricultural applications.
• Plated to prevent rust and corrosion.
SPECIFICATIONS:
Operating Temp. ..................... -4° to 140° F Part No. Our Net
Thread Description 1-914L- Net Each
Max. Working Pressure ..................... 80 psi
Dispensing Rate ... 1, 2, 3, 6, 12, and purge 1/4-28 Short-Straight -L5000 $.55
1/4-28 45° -L5030 .95 90°
Grease Capacity ................................ 250cc 1/4-28 90° -L5040 .95
Thread Size ................................... 3/8" NPT 1.20
1/4 NPT Straight -L5300
With Multi-Purpose Grease With High Temperature Grease 1/8 NPT Short-Straight -L5210 .55
1/8 NPT 45° -L5220 .95 65°
Part No. 1-439-33340 WHILE Part No. 1-439-33344 1/8 NPT 65° -L5230 .95
Our Net Price SUPPLIES Our Net Price 1/8 NPT 90° -L5250 .95
LAST. 5/16-24 Straight -L5620 .55
$5028 $5233 6mm x 1.00 Straight -L5400 .55
Boss ®
Boss ®
Plain
Part No.
1-700-009
Blue Rubber Brown Our Net Price
over Knit Gloves Jersey $.94
FEATURES: Gloves
• Blue rubber palm and fingertips. PLAIN AND Dotted
• Knit back.
DOTTED Part No.
Part No. 1-700-013 1-700-010
Our Net Price Our Net Price
QUANTITY DISCOUNT - QUANTITY DISCOUNT -
$574 DEDUCT 10% FOR 12 PAIR DEDUCT 10% FOR 12 PAIR $150
KBC TOOLS &
Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com MACHINERY
366 fluids • GREASE
The LPS ThermaPlex line
consists of high-performance
Bearing Greases bearing greases designed
to provide effective,
long-lasting lubrication in
MULTI-PURPOSE - Developed to outperform conventional bearing grease and extend relubrication the most aggressive and
periods. Ideal for lubricating all type of bearings and will prolong bearing life. It will reduce maintenance demanding industrial
costs and grease consumption. Excellent load carrying properties. environments. Each of the
ThermaPlex greases is a
HI-LOAD - Extreme Load Lubrication. Provides long lasting lubrication for heavily loaded bearings. combination of innovative
With its moly-fortified formulation, it prevents wear and damage caused by shock loading and constant solutions, delivering
vibrations. Excellent anti-wear properties and good corrosion resistance. Contains 3% moly. excellent lubrication for
HI-TEMP - High Temperature Resistance. Designed to reduce the risk of bearing failure at high virtually all industrial applications.
temperatures. Extends relubrication intervals and has excellent high temperature performance. It has
a very high dropping point 536°F and excellent vibration resistance. It reduces grease consumption Size Part No. Our
and maintenance costs. Type (oz.) 1-444- Net Price
AQUA - Water Resistant. Specially formulated bearing grease which withstands the effects of running Multi-Purpose 14.1 -70614 $5.29
Hi-Load 14.1 -70414 6.40
water and provides excellent, long lasting lubrication even when fully submerged in fresh or salt water. Hi-Temp 14.1 -70214 9.54
It resists water washout and provides excellent corrosion resistance. Reduces wear and grease Aqua 14.1 -70514 5.19
consumption by extending relubrication intervals.
APPLICATIONS:
Multi-Purpose Grease • Industrial
• Automotive
• Marine
Super Lube® everywhere . . .and "no wear"! • Household
• Rec. & Sports
Patented synthetic NLGI grade 2 heavy-duty multi-purpose lubricant with
PTFE. Synthetic base fluids and the addition of PTFE micro powders SPECIFICATIONS:
combine to form a premium lubricant that provide long life protection Color ........................................ Translucent White
against friction, wear, rust and corrosion. Machinery lasts longer, NLGI Grade ......................................................... 2
downtime is reduced and productivity is increased. Dropping Point .............................. 500°F (260°C)
Load Wear Index ........................................ 47 Kg.
USDA listed food grade lube, rated H1 for incidental food contact. Super Weld Point ................................................ 250 Kg.
Lube will not run or drip, does not evaporate or form gummy deposits and Shelf Life .............................................. 24 Months
will not dry out, melt or separate. Compatible with mist lubricants.
Outlasts conventional grease 50-100% and has excellent adhesion. REPLACES:
Part No. Our • Lithium, Bentone • Food Grade Grease
FEATURES: Description 1-444- Net Price Calcium or Aluminum • Wheel Bearing Grease
• Clean, non-toxic, non-staining, dielectric long lasting lubricant. 3 oz. Tube -21030 $4.40 Complex Greases • Valve Sealant
• USDA rating H1, will not drip, run or evaporate. 14.1 oz. Cartridge -41150 9.20 • High/Low Temp Grease • Dielectric Grease
• Impervious to salt water, safe in potable water. 400 gm. Jar -41160 9.50 • Electric Motor Grease • Multi-Purpose Grease
• Prevents rust & corrosion while reducing friction. 5 lb. Tub -41050 49.80 • Bearing Grease • O-Ring Lubricant
• Compatible with conventional lubricants.
• Repels dirt, dust and grime. NOT RECOMMENDED FOR USE IN:
• Extends machinery and equipment life, while saving time & money!
• Will not stain or harm wood, leather, rubber, plastics, fabric and paints. • Extremely High Temperatures. • High or Pure Oxygen Environments.
• Operating temperature range -45° to +450°F. • An Extreme Pressure Where Metal Based Grease Would Be Required.
White Lithium
Multi-Purpose
High Performance White Grease
Synthetic Grease This white lithium based grease contains
PTFE additives for superior lubrication
and provides a long lasting, protective
NLGI grade 2 severe duty GCLB grease film against rust and corrosion.
provides superior protection for equipment The white color allows for
exposed to a wide range of operating easy visual inspection. It
temperatures and environments. Use as a has rust and oxidation
lubricant and protective anti-rust film on inhibitors which protect
bearings, machine parts, equipment, or metal and it is heat
as a release agent on gaskets and seals. and water resistant.
NSF H1 rated for incidental food contact.
Anti-Seize All-Purpose
Loctite® anti-seize products provide protection against rust, corrosion, seizing and
Anti-Seize
galling as well as lubrication. Anti-seize are typically the products of choice for
high temperature applications because of their unique ability to provide protection
in extreme temperature conditions. Each product contains a combination of solid Steel blue color.
lubricating agents resulting in different high temperature limits and lubricities. A moly-fortified ,
These are the two major factors in choosing the right lead-free, extreme
anti-seize product for your application. pressure lubricant
that protects against
seizures up to 1800°.
Silver Grade Anti-Seize It lowers friction,
reduces wrench torque
and reduces maintenance
costs. It will not run, drip
Heavy-duty, temperature or settle out. All-purpose
resistant petroleum-based 1 lb. Brush-top Can Anti-Seize protects against 1/2 lb. Can 1 lb. Can
lubricant compound fortified Part No. seizure, heat freeze, galling, Part No. 1-444-04108 Part No. 1-444-04110
with graphite and metallic
flake. Inert, will not 1-444-76764 rust and corrosion. It is Our Net Price Our Net Price
Our Net Price not affected by contraction, 07 73
evaporate or harden in expansion or vibration. $9 $13
extreme cold or heat -
assembles up to 1600°F. $1805
Copper
QuickStix ™ Anti-Seize
Silver Grade
Copper color. A lead-free, low
Anti-Seize friction, anti-seize lubricant for
Stick extra protection in extreme
environments. It prevents
New semisolid stick offers the same seizures up to 1800°F,
performance characteristics as the 20 gm Stick heat-freeze, galling, rust and
corrosion. Copper Anti-Seize
Loctite® Silver Grade Anti-Seize Part No. 1-444-37230 brushes easily and is ideal
paste in a convenient semisolid
Our Net Price for use on stainless steel
stick form. Stick package offers
and for joining dissimilar * WHILE
more portability and less mess. $500 metals. It will not run, drip or SUPPLIES
settle out. It is highly adhesive LAST.
on both wet and dry surfaces.
Air Tool
1 Quart Can Lubricant
Air Tool Oil Part No.
1-829-5800 A specially formulated high grade lubricant
Our Net Price which prolongs the service life of air tools,
cylinders and accessories allowing maximum
FEATURES: $1075 performance. Additionally, it rustproofs
• Lubricates and protects. while removing moisture as it lubricates.
• Removes gummy deposits.
• Does not attract dust or dirt. 1 Pint 1 Gallon
WHILE SUPPLIES LAST.
Part No. Part No.
1-816-ATL016 1-816-ATL128
Our Net Price Our Net Price
30 WT.
Compressor
Oil Industrial Oils
To assure longer and trouble-free air EEZ WAY OILS consist of five viscosity grades of a
compressor operation, specify Coilhose special lubricant designed for use on machine ways
Compressor Oils. Our reciprocating and slideways. These oils are non-corrosive and will
compressor lubricants are napthenic- provide the necessary qualities to protect against
based rust and oxidation inhibiting oils wear and stick-slip.
especially designed for reciprocating
(piston-type) air compressor lubrication. 1 Gallon 5 Gallon
Part No. Our Part No. Our
1 Quart 1 Gallon Grade 1-820- Net Price 1-820- Net Price
Part No. Part No. 10 WT -710 $16.90 -7105 $71.95
20 WT -720 16.90 -7205 71.95
1-816-ACL032 1-816-ACL130 30 WT -730 16.90 -7305 71.95
Our Net Price Our Net Price 40 WT -740 16.90 -7405 71.95
16.90 71.95
$715 $2360 50 WT -750 -7505
1 Gallon 5 Gallon
Non-corrosive oil improves Part No. Our Part No. Our
1 Gallon Grade 1-820- Net Price 1-820- Net Price
lubrication in all types of
hydraulic units (except Part No. 1-444-30523 10 ISO -810 $15.60 -8105 $67.70
hydraulic brakes). Contains Our Net Price 15 ISO -815 15.60 -8155 67.70
antioxidant, anti-rust and 05 22 ISO -822 15.60 -8225 67.70
anti-wear additives. $17 32 ISO -832 15.60 -8325 67.70
“The Original”
Smart Straw design allows for
The Solution That Works As Hard As You Do SPRAY STREAM one-handed operation. Simply flip it up
for a precision stream, and down for
Known as “the can with a thousand uses,” WD-40 regular spray action.
protects metal from rust and corrosion, penetrates stuck
parts, displaces moisture, and lubricates just about any-
thing. WD-40 is also great when it comes to cleaning Big Blast has a wide-area spray Big
grease, grime, and other marks from most surfaces. nozzle designed to cover a 40% Blast
larger area than normal nozzles.
FIVE BASIC FUNCTIONS: Part No. Our
• CLEANS: It gets under dirt, grime and grease to clean. Description 1-443- Net Price
It also dissolves adhesives, allowing easy removal of No Mess Pen* -10075 $3.25
labels, tape, stickers, and excess bonding material.
• DISPLACES MOISTURE: It quickly dries out electrical 12 oz. Smart Straw Aerosol -10052 6.55
systems to eliminate moisture-induced short circuits. 16 oz. Aerosol -005 6.75
• PENETRATES: Loosens rust-to-metal bonds and frees 18 oz. Big Blast Aerosol -006 7.10
stuck, frozen or rusted metal parts. 20 oz. Trigger Pro™ -013 13.75
• LUBRICATES: Lubricating ingredients are widely 1 Gal. Bulk -004 22.50
dispersed and hold firmly to all moving parts. 5 Gal. Bulk -012 103.95
• PROTECTS: Protects metal surfaces with 1 Pt. Spray Bottle (empty) -007 3.45
corrosion-resistant ingredients to shield against
moisture and other corrosive elements. * WHILE SUPPLIES LAST.
Penetrating
Oil Penetrating
BY AERVOE INDUSTRIES
Lubricant
Loosens rust and corrosion
formed by alkalis, fruit acids, FEATURES:
water, and electrolysis. • Penetrates inaccessible areas to displace contaminants.
FEATURES: • Lubricates with oils, additives and Teflon®
• Flash point > 160°F. to reduce friction and increase part life.
• Displaces moisture. • Protects against moisture and corrosion damage.
• Attacks rust and corrosion • Displaces moisture to prevent icing.
to free frozen parts. • Inhibits rust formation and corrosive build-up.
• Formulated with low • Rejects dirt, dust, sand and other abrasive particles.
surface tension for • Resists rust and corrosion, even in extreme conditions.
fast penetrating action. • Effective from -60° to 475°.
• Dielectric strength 35kV/mm. Stock Part No. Our
No. Description 1-444- Net Price
11.2 oz. Aerosol
20006 12 oz. Aerosol -010 $10.80
Part No. 1-125-6030 29200 18 oz. Pump Spray -015 15.70
Our Net Price 26000 1 Gallon Refill -025 68.45 Ideal for preventative and corrective
$512 21010 2 oz. Bottle -027 2.95 maintenance in industrial applications!
LST PB Penetrating
Penetrant Catalyst
Powerful, concentrated penetrant 7 oz. Aerosol
loosens rusted, warped and frozen Part No.
NON-OZONE
parts. Breaks loose surface tension 1-443B-002
LST Penetrant is specially of rust and corrosion quickly by
formulated with low surface DEPLETING creeping up, around and into all Our Net Price
tension for fast penetrating
action. LST attacks rust and
hard-to-reach cavities. Lubricating
film stays on part to help prevent
$420
corrosion to free frozen parts Part No. Our further rusting or freezing. Loosens
and has a powerful foaming Size 1-444- Net Price 12 oz. Aerosol
rusted or frozen nuts, bolts, pipes.
action that provides complete 11 oz. Aerosol -01916 $6.83 Lubes and prevents rust. Contains Part No.
surface coverage while displacing 1 Gallon* -01928 35.02 No 1,1,1 trichloroethane or CFC 1-443B-001
moisture. LST contains no 5 Gallon* -01905 155.73 formulations that deplete the Our Net Price
chlorinated solvents. It has earth’s protective layer of
a flash point of 175°F. * WHILE SUPPLIES LAST. stratospheric ozone. $575
KBC TOOLS &
Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com MACHINERY
370 fluids • LUBRICANTS / PENETRANTS
FEATURES:
• Produces an air tight, micro-thin coating/film that
simultaneously dries as it protects, avoiding dirt, grime,
and things that other "wet" lubricants attract.
All Purpose • Perfect for working surfaces of machinery, use in dip
process of production parts or apply on tools when stored.
Lubricant • Use on tools, hinges, gears, locks and much more!
Industrial
High Performance 2
®
Corrosion ZINC-X
BY AERVOE INDUSTRIES Suppressant 101 Corrosion
Inhibitor
Provides excellent rust protection for metal parts that must
be stored, indoors and outdoors, for long periods of time.
FEATURES:
FEATURES: • 95% pure zinc-rich galvanized coating.
• Seals out acid, moisture, air, • Prevents rust and corrosion on all metals.
salt water, and other elements. • Works as a paint primer over rust.
• Neutralizes acid formed • Repairs rusted, galvanized
and welded surfaces. WHILE
by corrosive atmosphere. SUPPLIES
• Prevents corrosion • Up to two years protection.
caused by fingerprints. • Works like a hot-dip on ferrous LAST.
• Penetrates cracks, assuring 10.5 oz. Aerosol metals indoors and outdoors. 14 oz. Aerosol
complete protection. Part No. • Withstands water temperature up Part No.
• Easily removed with mild solvent. to 212° and continuous dry heat up to 750°.
1-125-6013 • Will not yellow, chalk, crack, or peel. 1-444-05616
• Does not contain silicone.
• Does not contain CFCs, Our Net Price • Meets ASTM A-780 specification. Our Net Price
• Does not contain Methyl Ethyl Ketone. 46
HCFCs, or chlorinated solvents.
• Meets MIL-C-16173E, Grade 4.
$455 • Fast drying; dries to touch in 10-15 minutes. $10
Rust Heavy-Duty
3
®
Rust Treatment Crown Tool & Die Saver provides maximum storage
protection for tools and dies. Ideal for long-term indoor or
Converts existing rust (rust required) into outdoor storage or long distance shipments. Delivers a
a stable base. Cured product acts as a primer greasy elastic film that won't harden or crack with age.
ready for painting with oil- or solvent-based
paint. Protects surface from corrosion. Use on
metal pipes, valves, fittings, outside surfaces
of storage tanks, fences, guard rails, wrought FEATURES:
iron furniture, conveyors, construction and • Absorbs moisture and
agricultural equipment. neutralizes acid formed by
corrosive atmospheres.
• Easy to remove. 11 oz. Aerosol Can
10.25 oz. Aerosol • Greasy, elastic film that won't Part No. 1-125-3090
Part No. 1-444-30539 harden or crack with age. Our Net Price
Our Net Price • Provides protection for
$660 indoor or outdoor storage. $489
$435 MON
THS thickness. It develops maximum strength in 24 hours. $545
KBC TOOLS &
Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com MACHINERY
374 fluids • PAINT SUPPLIES
41 Piece
Spray
15 Pc. Spray Gun Set
Gun Kit HVLP Gravity Feed Spray Gun
SPECIFICATIONS:
Fluid Orifice(mm) ................. 1.5
KIT INCLUDES: Air Inlet (NPT)......................1/4"
• Automotive spray gun, Cup Size(mL).......................500
non-bleeder type – Air Pressure (PSI) ...........90 lbs.
adaptable to paint tank. Air Consumption (SDCFM) ....15
• Touch-up spray gun with
universal trigger, Touch-up Spray Gun
non-bleeder type.
• 1 qt. drip free siphon feed SPECIFICATIONS:
cup – 9.3 scfm @ 40 PSI. Fluid Orifice(mm) ................. 1.6
• 1 pt. siphon feed cup Air Inlet (NPT)......................1/4" Model No. 9041
– 4.5 scfm @ 40 PSI. Cup Size(mL).......................200 Part No. 1-832-9041
• Two female 1/4" plugs. Air Pressure (PSI) ...........50 lbs. Our Net Price
• One 1/4" male plug. Air Consumption (SDCFM) ......7
• One 1/4" adapter. $13750
• Five dust masks. KIT INCLUDES:
• Black blow molded case. • HLVP gravity free spray gun • Blow mold case • Rubber tip
• Paint cups with covers (2) • Blow gun • Roll tape seal
• 5 piece spray cleaning kit • High pressure nozzle • Quick couplet
Part No. SPECIFICATIONS: • 1/4" to 1/4" female hose connector • Paint strainers (10)
• Rubber tip
1-832-9006 Air Inlet ....................................... 1/4" NPT • 1/4" to 1/4" male hose connector • Inflating needle • Female plugs (2)
Our Net Price Air Pressure (PSI) ................................ 40 • 5 ft. vinyl coil air hose for air brush • Hose end adapter • Proper regulator
Inlet Pressure (PSI) .............................. 40 • Fine head air brush • Tapered nozzle • Wrench
$7999 Nozzle Pressure (PSI) ......................... 10 • 2 oz. (22 cc) jar • Safety nozzle • Hex connector
Chisel® Paint
Stripper BY AERVOE INDUSTRIES
FEATURES:
• Marks with real paint, dries in 5 minutes.
Ball • Durable metal ball tip marks on wet, oily,
smooth, and rough surfaces including metal,
Dura-Ball®
Paint wood, plastic, glass and any hard surface.
• Lead-free, non-toxic. Metal Ball Tip.
Marker® • Marks are weather resistant, fade-resistant. WHILE
• Unbreakable plastic bottle with 1/8" ball tip. SUPPLIES
• Marking range: -50°F to 150°F.
LAST.
Part No. Our
Color 1-443- Net Price FEATURES:
• Real, lead-free paint for marking, Part No. Our
White -84600 $5.60 identifying and color coding. Color 1-443- Net Price
Yellow -84621 5.25 • Quick-drying marks resist fading, White -96652 $5.05
weather and water. Yellow -96653 5.05
• 1/8" ball marks on smooth or
rough surfaces including glass, Red -96654 5.05
5.05
B® Paintstik® plastic, rubber, cardboard,
leather and ceramics.
Black
Orange
-96655
-96656 5.05
• Marking range: -50°F to Blue -96657 5.05
150°F. (-46°C to 66°C).
11/16" x 4-3/4"
Valve Action®
FEATURES:
• Real lead-free paint in stick form; Paint Markers
combines long-lasting durability of
paint with the ease-of-use of a crayon.
• Weather resistant, UV-resistant. Marks in
• Ideal for layout, color coding, Part No. Our Real Paint.
fabrication and identification. Color 1-443- Net Price
• Marks through oil and water. White -84810 $1.00
• Marks on smooth, rough, Black -84813 1.06
rusty or dirty surfaces.
• For use on metal, wood, Yellow -84811 1.03 FEATURES:
plastic, concrete, rubber, Red -84812 1.06 • Marks with real paint, dries in 3 minutes.
glass, cardboard and paper. • Valve action nib releases paint as needed for continuous marking.
Orange -84814 1.06 • Marks on all surfaces including
• Lead-free, non-toxic.
• Marking range: -50°F to 150°F. Blue -84815 1.06 metal, wood, glass, plastic,
rubber, cardboard and paper. Part No. Our
• The fiber nib is replaceable to Color 1-443- Net Price
assure complete use of each marker. White -96800 $2.40
• Lead-free, low halogens.
Pro-Line® HP • Durable metal barrel.
Yellow -96801 2.40
• Marking range: -50OF to Red -96802 2.40
High Performance 150OF. (-46OC to 66OC). Blue -96805 2.40
Liquid Paint Markers
FEATURES:
• Permanent, durable and dries quickly.
• Xylene-free; No EPA SARA 313 chemicals.
Sharpie® #15 Marker
• Contains no California Prop 65 listed chemicals.
• Low in halogenated compounds and sulfur.
• 3mm medium point bullet tip nib
• Marking range: -50°F to 150°F. Fine Tip
• Resists fading under Part No. Our
Color 1-443- Net Price
the harshest conditions. FEATURES:
• Marks on oily, soapy White -96960 $2.40 • Ideal for fine line marking.
and wet surfaces. Yellow -96961 2.40 • Extra tough tip, won't spread or mush.
• Marks on most types Red -96962 2.40 • Smear-resistant, water resistant, fast-drying.
of metal and coated • Marks on metal, wood, cardboard,
metal surfaces including Black -96963 2.40 Part No. Our
paper, plastic, glass, etc.
carbon and stainless Orange -96964 2.40 • For identification of parts, Color 1-443- Net Price
steels, aluminum, powder Blue -96965 2.40 layout work and marking Red -96022 $.95
coating, PVC plastics cartons and crates.
and epoxies. Green -96966 2.40 Black -96023 .95
• Meets U.S. Fed. Spec. TT-1-544.
BRITE-MARK® FINE
BRITE-MARK Markers ® Dykem
Color
Part No.
1-442-
Our
Net Price
BRITE-MARK® Fine is a general purpose marker
that writes on almost any surface and features a
Red -84234 $2.34 fine precision tip for clear, distinct markings.
Dark Blue -84235 2.34
DYKEM BRITE-MARK® quick drying, oil-based Black -84231 2.34
paint withstands indoor and outdoor conditions, White -84232 2.34 FEATURES:
including acid and alkaline rain without fading, Yellow -84233 2.34 • Clip on the pen cap fits conveniently
chipping or losing its opacity. DYKEM Orange -84236 2.34 in pocket or on clipboard between uses.
BRITE-MARK® pens can be used to Green -84237 2.34 • Lightweight aluminum body.
permanently identify inventory, • Ideal for fine print or color coding.
assemblies, tools, finished products,
or works-in-progress while
resisting most work related BRITE-MARK® MEDIUM
abuses or compounds. Dykem Part No. Our
Color 1-442- Net Price
Dark Blue -M1 $2.69 BRITE-MARK® Medium is a general purpose
Black -M2 2.69 marker that writes on almost any surface and
White -M3 2.69 features a medium tip for clear, bold markings.
Yellow -M4 2.69
Orange -M5 2.69
Red -M6 2.69 FEATURES:
Green -M7 2.69 • Heavy duty aluminum body with large paint capacity.
• Ideal for color coding.
FEATURES: FEATURES:
• Great for color coding. • Ideal for quality system marking, including
• Felt tip writes on untreated, bare metal surfaces. defect identification, pass/fail of a process
• Ideal for quality control, part assembly, and in-process part tracking.
identification, site inspection, and more. • Withstands a wet environment, stays on
• 45 seconds to 1 minute drying time. until removed with detergent.
• 15 to 20 seconds drying time.
Toolmakers Ink
STEEL BY AERVOE INDUSTRIES
Layout Fluids /
BLUE
Remover & Enables accurate scribing without glare. Produces
Cleaner quick-drying film that won't peel, flake or rub off.
Contains no acids and resists heat. Suggested for
dies, templates, tools and machined parts. Excellent
adhesion to metal, glass and plastic.
STEEL
RED BUY CASE OF 12, Toolmakers Ink
DEDUCT 10% 12 oz. Aerosol Can
Part No. 1-125-6001
Our Net Price
$555
BY AERVOE INDUSTRIES
Fountain Brush
DYKEM®'s Fountain Brush Hi-Spot is an intensely blue, soft, Double Size
& Bottle consists of a soft uniform paste that spreads easily Tube 3/4" - 4"
hair brush with a hollow and evenly to show high spots on
handle attached to a Part No.
bearings. A thin coat may be left
squeezeball bulb. No on the surface day in and day out, 1-442-203
redipping is required, and and will not dry. The film remains Our Net Price
it allows for delicate to pliable and transferable and in
heavy flow depending on condition for months. $549
your desired application.
1 Pint Pre-Clean™
Tool Part No. 1-958-45305
STEP 1: Clean part
with Pre-Clean™.
Black® Our Net Price STEP 2: Apply Tool Black® Gel.
Gel $3275 STEP 3: Seal part
with Dri-Shield™.
1 Pint Tool Black® Gel
FEATURES: Part No. 1-958-45310
• Fast, inexpensive Our Net Price COMPLETE KITS INCLUDES:
alternative to black oxide. (1) One pint bottle of Tool Black® Gel.
• The Tool Black® Gel formula offers a $4360 (1) One pint trigger spray bottle of Pre-Clean™.
more controllable blackening option. (1) One pint trigger spray bottle of Dri-Shield™.
• Impart a uniform black cosmetic 1 Pint Dri-Shield™
finish to most ferrous metal parts. Part No. 1-958-45315 Part No. 1-958-45325
• One pint of Tool Black® covers Our Net Price
20 square feet, however coverage Our Net Price
varies with application technique. $4360 $10360
BY AERVOE INDUSTRIES
Fault-Finder
Locates & marks cracks
& defects in metals,
The Crown Fault-Finder dye penetrant inspection glass & plastic!
system is a simple, nondestructive method of testing
for defects open to the surface - but not visible. Its
effective with all ferrous & nonferrous metals, alloys,
glass, ceramics, most plastics and other nonabsorbent Size Part No. Our
materials. It offers a reliable, low cost inspection system Description (Aerosol) 1-125- Net Price
that can travel anywhere - in the field or for shop use Group 1A Kit* – -1010 $91.84
where work space is limited. Its ideal for short run Cleaner 8.5 oz. -1011 5.19
applications where production testing installations are Penetrant 8.5 oz. -1012 6.36
not practical - or for spot testing large parts, assemblies, Developer 8.5 oz. -1013 6.86
welds, etc. Fault-Finder is conveniently packaged in
economical 12 oz. aerosol spray cans, also available in *Complete w/carrying case, instructions,
kit form. Fault-Finder offers a simple 3-part inspection 4 cans cleaner, 2 cans penetrant,
system that's easy to use - fast - sensitive & eliminates 2 cans developer.
the need for costly special equipment.
APPLICATIONS:
QB Precision Duster • Electronic Equipment.
• Office Equipment.
The non-ozone depleting, nonflammable duster for • Computers & Printers.
removing contaminant's, dirt, dust and other soils. • Optical Cleaning.
• Magnetic Tape Heads.
• Typewriters.
QB Precision Duster is a moisture-free compressed gas that provides 10 oz. Aerosol
a pure, quick blast for removing dirt, dust, oxide particles and other
contaminant's from delicate assemblies and electronic components. Part No.
With the pinpoint extension tube, QB can easily remove soils from 1-444-05710 WHILE
those hard-to-reach spaces. QB does not contain ozone depleting Our Net Price SUPPLIES
substances and is non-flammable. With its nonabrasive and
nonresidue properties, QB Precision Duster will not cause damage $2223 LAST.
to delicate electrical/electronic and fine part surfaces.
Recirculating
Parts Cleaner
Designed from the ground Handi-Kleen
up with economy in mind.
Parts Cleaner
FEATURES:
• Works with as little as 2-1/2 15-Gallon Recirculating
gallons of solvent. 10 gallon Parts Washers - Series 36
maximum solvent capacity. Handi-Kleen Parts Washer
• 3-way solvent filtration lengthens holds a maximum 15 gallons
solvent life, cuts solvent costs. of solvent. Parts rest on a
• Safety cover 165°F, fusible link melts removable sloped metal shelf
to slam cover shut in case of fire. above fluid level, and are
• Roomy large 30"x 18" work area. cleaned under flow from
• Quality construction - rugged 16-gauge flexible metal hose. Parts
metal tank back and bottom; sturdy may also be soaked in
18-gauge front and sides. solvent below shelf level.
• Bottom drain for quick solvent change. The sludge collector contains
• Durable pump located inside tank safely a dual-element foam filter Includes fusible link, cover, pump,
away from accidental damage, tough to help the larger volume of work shelf, sludge tray, & flexible
centrifugal pump has no bearings or seals fluid remain free from metal flush hose.
in contact with solvent, no metal-to-metal contaminant's for extended
rubbing parts. Made of abrasive resistant cleaning fluid life. 18-gauge
Celcon, this pump will pass many solids Model HK 150 steel tank side, 16-gauge steel Model PL 36
and keep on running - even dry - when Part No. 1-440-HK150 used on tank bottom and rear.
Powered by a 115V, 60/50 Hz, Part No. 1-440-PL36A
many competitive units won't.
• Bench Top Option - Use without legs for Our Net Price 1 phase motor. Comes standard Our Net Price
work bench installation.
• Weight 83 lbs.
$63000 as free-standing floor model
with legs. Weight 160 lbs. $81500
EconokleenTM Recirculating
Parts Washer Parts Cleaner
Suitable for both professional shop and home use. Reliable,
abrasive-resistant centrifugal pump circulates the cleaning
solvent. Parts are easily cleaned while brushing under this 3.5 GALLON
steady stream of fluid. WASHER
FEATURES:
• Bench top economy and convenience.
• Industrial grade steel construction.
• Spring-hinged cover has a fusible link
to close automatically in case of fire.
• Top removable for easy cleaning.
• Operating fluid capacity of 2-5 gallons. FEATURES:
• Durable pump.
115V 1-Phase Motor • Thermally protected 115V
Part No. 1-440-EC-A motor with on/off switch.
• 3 way filtration traps
Our Net Price solids and grime.
$20400 • In case of fire, safety cover
with 165° fusible link melts
to close cover automatically. 20 GALLON
• One piece stamped body. WASHER
3.5 Gallon Washer 20 Gallon Washer
Agitene SUPER
15" x 12.5" Work Area 30" x 18" Work Area
AGITENE 141
® Part No. 1-446-005 Part No. 1-446-010
Our Net Price Our Net Price
No carcinogens, No ozone depleting solvents, $6800 $13900
No chlorinated solvents. Far superior to ordinary
reprocessed solvents. Agitene cuts grease, motor
oil, cutting oil, water soluble and gummy deposits.
EXTREME KLEANE
SUPER AGITENE® It is safe to use on metal, plastics MACHINE AND SUMP CLEANER.
and painted surfaces. Conforms to California Rule 66.
Contains Hand Ease®, a cosmetic-grade lanolin formulation
which replaces some of the skins natural oils removed by the
solvent. Super Agitene® is a low-odor solvent with a 105°F flashpoint. FEATURES:
• One gallon with 25 gallons of
SUPER AGITENE® 141 Has the same attributes as Super Agitene but a higher flashpoint of water will thoroughly clean
141°F. It is classified as a non-hazardous cleaning solution which means lower disposal most dedicated machine tools.
costs and fewer environmental restrictions yet delivers excellent cleaning performance. • Proper maintenance of your metalworking
Not to be heated. machines and sumps is critical when
REGULAR AGITENE Same high quality cleaning action as Super Agitene, but with two tool life, coolant life, and operator
important differences. First, it leaves cleaned parts film-free, making it ideal for cleaning safety are important to you.
parts which are to be painted. Second, it will not attack varnish, allowing varnish-insulated • Will clean your machine sump
electric motor components to be cleaned without damage. making coolant change over easy.
PreSolve® Orange
Aqua Power ®
Degreaser
Cleaner & Degreaser
Biodegradable. Penetrates, dissolves and
removes dirt and oil. Fast drying and residue-free. PreSolve® is ideal for removing
Environmentally friendly product is biodegradable, grease, adhesives, tars and oils.
has low toxicity, contains no ozone-depleting chem- This orange-based degreaser is
icals (ODCs) and is non-corrosive/non-caustic. designed to solve the toughest
cleaning problems in seconds. It
evaporates leaving low residue and
Function: Biodegradable 17 oz. Aerosol Can
is safe to use on all metal parts and
cleaner for removing oil, Part No. equipment. PreSolve® has a flash
grease, and asphalt. 1-444-30565 point of 104°F and does not contain
Application: All-purpose Our Net Price any chlorinated solvents.
metal parts cleaner. $570 Part No. Our
Size 1-444- Net Price
15 oz. Aerosol -01420 $12.29
Pro Strength 1 Gallon Bottle* -01428 73.60
* WHILE SUPPLIES LAST.
Degreaser
Quickly dissolves and removes grease, oil and dirt
from iron, steel, aluminum, magnesium, copper,
Precision Clean
rubber, plastic and concrete. Rinses off with water. Multi-Purpose
Function: Self-emulsifying degrease that Cleaner/
quickly cuts and removes grease, oil, and
dirt, as well as inhibiting rust and corrosion. Degreaser
Application: Cleaning and degreasing
industrial and farm equipment, lawn
mowers, garage floors, tools. A universal, biodegradeable, industrial
cleaner/degreaser which removes tough
15 oz. Aerosol Can stains and solids with an easy to rinse
Part No. 1-444-30521 application. The pH for concentrate = 13,
Our Net Price the pH for ready-to-use = 12.5. Precision
Clean is safe to use on most surfaces
$395 except magnesium. It does not contain
butyl, chlorinated or petroleum solvents, NON-OZONE
bleach, ammonia or abrasives. DEPLETING
Glass &
BY AERVOE INDUSTRIES Surface
Off-Line Contact Cleaner
Non-Chlorinated
Cleaner Brake & Parts FEATURES:
• Wipes off to a bright and
FEATURES: Cleaner sparkling, streak-free finish.
• Does not leave a film or residue. • Removes fingerprints, road
• Safe on plastics and metals. Penetrates, dissolves, and and factory film, and grime.
• Does not contain CFCs, HCFCs, removes oil from brake systems • Will not scratch or harm glass,
or chlorinated solvents. and metal parts. Safer for Plexiglas, or other plastic materials.
• To be used on out-of-service aluminum. Leaves no • Will not harm painted surfaces.
electronic components. contaminant-attracting residue • Retards fogging.
• For relays, terminals, switches, etc. or chlorinated solvent run-off.
10.9 oz. Aerosol 20 oz. Aerosol 19 oz. Aerosol
Part No. 1-125-8276 Part No. 1-444-82220 Part No. 1-125-860
Our Net Price Our Net Price Our Net Price
$631 $500 $322
A solvent-based spray
cleaner for general
Wax-based mold release that eliminates part cleaning metal molds.
imperfections. Perfect for overnight protection
- helps to eliminate flash rust caused from FEATURES:
condensation after shut-down. Then at start-up • For in-place cleaning of all
no need to remove, just shoot mold-clean. metal molds, or for superior
clean-up prior to storage. 10.5 oz. Aerosol Can
• Removes all grease, oil, Part No.
and other soils that cause
20 oz. Aerosol Can 1-125-3095
FEATURES: molding imperfections.
• Ideal for epoxy molding. Part No.1-125-3470 • Does not leave a residue, Our Net Price
• Ideal for manufacturers of Our Net Price and won't interfere with
$473
flexible and rigid polyurethane. molding operations.
• No silicones. $533
Hornet
BY AERVOE INDUSTRIES
& Wasp
Paintable Lecithin Spray
Mold Releases Use this fast-acting, powerful
15 oz. Aerosol
aerosol spray to saturate nests
FEATURES: instantly and eliminate hornets, Part No. 1-125-862
• Will not interfere with post-finishing operations; wasps, yellow jackets, from inside Our Net Price
parts can be painted, stenciled, hot stamped, (attics and other areas where
glued, plated, or otherwise decorated.
• Resists crazing and stress cracking.
nests are built) and outdoors. $697
• Will not mar clear polyethylene,
polystyrene, or other plastics. FEATURES:
• Meets FDA regulations. • Sprays up to 20 feet; pinpoint stream reaches
20 oz. Aerosol Can dense and hard to reach cracks and crevices.
• High-delivery valve for complete saturation.
Designed for quick, Part No.1-125-3452 • High percentage of active ingredient ensures
clean releases on Our Net Price the best knockdown and kill rate.
thermosets and 08 • High dielectric strength of 41kV/mm.
thermoplastics. $4 • Lasting residual deposit
prevents reinfestation for weeks.
UNCLE WORKPLACE
EARL’S Orange Pumice
Soap for Hand Cleaner
Machinists FEATURES:
• Quickly removes
the toughest soils.
• Contains pumice for
FEATURES: deep-cleaning strength.
• Formulated to easily remove • Heavy-duty scrubbing pumice.
shop grease, oils, and grime. • Contains no harsh chemicals.
• Moisturizers protect skin from • Fresh citrus scent.
metalworking fluid's chemistry and biology. 16 fl. oz. 1 Gallon
• One 3.4 ounce bar lasts longer
than one gallon of liquid soap. Part No. Our Part No. Part No.
Description 1-122- Net Price
• Made with all natural ingredients. 1-444-09216 1-444-09228
• No more need to use gritty cleaners. Unscented -005 $3.00
Lemon Zest -006 3.00 Our Net Price Our Net Price
• No need to use liquid glove
or other barrier creams. Orange Grove -007 3.00 $372 $2303
JB
-
®
JB
-
®
JB
-
®
J-B Stik
Adhesive JB
-
®
J-B
Kwik
Sealant
J-B Mini J-B Kwik is a fast-set,
5-Minute fast-cure version of the
original J-B Weld.
Clear
Epoxy FEATURES:
• Perfect for need-to-
Syringe FEATURES:
fix-fast repairs at
home or in the shop.
• Hand kneadable, steel- • Will set in 4 MINUTES,
reinforced epoxy putty and cure in 4-6 HOURS!
adhesive/sealant plug • Nontoxic, and temperature
holes and makes permanent resistant up to 300°F.
repairs on wet and dry srufaces.
• Will cure completely submerged
FEATURES: 6 ml Syringe
in water or GASOLINE! Part No. Part No.
• 1-time use. • Will fully cure in 20-30 minutes 1-441-8267 1-441-8276
• 5-minute set time. Part No. 1-441-8212 • Can be drilled, sanded, filed,
Our Net Price
• Adheres to metal, Our Net Price tapped, machined, and painted. Our Net Price
wood, tile, ceramic, 91 • Requires no tools or "prep $531 $510
glass and china. $2 time", and makes no mess.
11.3 oz.
GORILLA
BY AERVOE INDUSTRIES Aerosol Can GLUE™ 2 oz. Bottle
Part No. Part No.
Heavy Duty 1-125-8091 1-611-50002
Adhesive Our Net Price The Toughest Our Net Price
$876 Glue on
$487
Planet Earth!™
FEATURES: Gorilla Glue is the versatile, interior/ 4 oz. Bottle
• Low soak-in. exterior adhesive ideal for most household Part No.
• Quick set up allows for fixes and building projects: furniture repair,
faster production times. crafts, woodworking, and general repairs 1-611-50004
• Long open time to allow for repositioning around the house. Bonds wood, stone, Our Net Price
metal, ceramic & more! Incredibly strong
and adjustments of surfaces to be bonded.
• Extremely fast drying time: and 100% waterproof. $724
30 seconds to tack.
• Uniform misting spray pattern.
• Withstands temperatures up to 130°F. Bonds, protects, holds, repairs,
GORILLA TAPE™ patches and seals. Works well on
The Toughest Tape on smooth shiny surfaces, rough wood,
Planet Earth™ Incredibly stucco, plaster, brick, and masonry
Strong, Tough & Thick
1
QuickTite® Instant 1. TOUGH ALL-WEATHER SHELL:
Adhesive Creates barrier that withstands
harsh elements, creates tough
2
Similar to Loctite® Fixmaster® 1.4 oz. Syringe 50 ml. Cartridge Fixmaster® Static Mixers
Steel Putty, but aluminum filled Part No. Part No. Packaged 10/bag -
for mixing and dispensing
to better match the coefficient of 1-444-99393 1-444-99394 epoxies in 50 ml.
thermal expansion of aluminum.
Fixmaster® Sets in 20 minutes. Our Net Price Our Net Price containers.
Aluminum Putty $800 $1345 Part No. 1-444-98455
Our Net Price
$737
1 lb. Kit
Part No. Applicator Gun for Part No. 1-444-98472
1-444-97463 50 ml. containers Our Net Price
Our Net Price
$5120 $3677
4 oz Stick
Part No. Fixmaster® Magna-Crete
1-444-39366
Fixmaster® Our Net Price
A two-component, rapid setting concrete repair
Concrete $930 and grouting system. Chemically resistant to
Repair Epoxy most common liquids and chemicals, and can
be mixed and applied at temperatures from -
26°C to +54°C. Bonds to concrete, wood, glass,
Enables permanent repairs steel, and other construction materials. Ready
to concrete and masonry. for service in one hour. Summer and winter
Convenient stick contains additives are also available to aid cure times.
pre-measured portions of
activator and base. Once
cured, it can be tapped, 1 Gallon Kit
drilled, screwed, sawed, filed Part No. 1-444-95551
or painted, and will have an
appearance and texture similar to Our Net Price
concrete. Sets in 5 to 10 minutes. $6000
KBC TOOLS &
MACHINERY Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com
GASKETING SEALANTS • fluids 385
Flange Sealant
QuickStix™ 534 Hi-Tack Rigid Assembly Flange Sealant
Gasket Dressing Forms a flexible, solvent-resistant
seal that will not tear or decay. Seals
For Existing Gaskets to 300°F and fills gaps to 0.050". Can
be used on flexible metal assemblies,
including aluminum surfaces. Easy
No mess, semisolid formula disassembly and cleaning. Ideal for
offers added control and ease of on-the-spot and emergency repairs,
use. Patented package is portable or when a conventional gasket is
and won’t leak or spill. Seals and 9 gm Tube out of stock.
holds the heaviest gaskets during Part No. Our
assembly. Solvent-free and low Part No. 1-444-39155 Size 1-444- Net Price
Main Attributes: Resists low
odor. Suitable to 300°F. Our Net Price on-line test pressure, uncured. 6 ml tube -51817 $4.85
15.05
Main Attributes: Vertical applications,
$616 Applications: Gearbox, engine casting.
50 ml tube -51831
222MS™ 10 mL Bottle
Part No. 1-444-22221
Threadlocker Low Strength / Our Net Price
Loctite® liquid threadlockers have found wide Small Screw / $1153
acceptance in a range of applications - from Purple
delicate electronic components to heavy 50 mL Bottle
construction equipment. Loctite® threadlockers
are available in varying viscosities and Part No. 1-444-22231
Ideal for fastener diameters
strengths for virtually any application, including of 1/4" and smaller, long Our Net Price
exposure to extreme environments. Patented,
revolutionary QuickStix® semisolid formulas
engagement length fasteners,
and components requiring
$3205
offer added convenience and portability. occasional adjustment. Apply to
• Prevents loosening from shock and vibration threaded parts before assembly. 250 mL Bottle
Controlled lubricity for accurate
• Single component - clean and easy to use
clamp loads. Parts can be Part No. 1-444-22241
• Can be used on various sizes and fasteners Our Net Price
• Seals threads disassembled with hand tools.
• Stops rust and corrosion Approved for use in or around
food processing areas. $11132
242™ 243™
Medium Strength Medium Strength / QuickStix™ 248™
Oil Resistant
Well suited for fasteners between Medium / Semisolid / Blue
1/4" and 3/4" diameter. Applied to
threaded components before Like Loctite® 242™, this
A general purpose, medium threadlocker stick is well suited
assembly, Loctite® 242® has strength threadlocker with
controlled lubricity for accurate for 1/4" to 3/4" fasteners and is
improved oil tolerance. removable with hand tools. The
clamp loads. Parts can be Suitable for 1/4" to 3/4"
separated using hand tools. semisolid formula also means it
diameter fasteners. won’t spill or leak.
Part No. Our Part No. Our
Size 1-444- Net Price Size 1-444- Net Price Part No. Our
Size 1-444- Net Price
10 ml bottle -24221 $11.20 10 ml bottle -24077 $12.70
50 ml bottle -24231 31.10 50 ml bottle -24078 35.16 9 gm tube -37684 $11.40
250 ml bottle -24241 108.10 250 ml bottle -24079 122.57 19 gm tube -37087 24.00
262™ 290™
Medium to High Strength QuickStix™ 268™ Wicking / Medium Strength / Green
For pre-assembled bolts up to
Applied to fasteners up to 3/4" in High Strength / 1/2" to secure them in place.
diameter before assembly. High Semisolid / Red Penetrates threads by capillary
lubrication for easy assembly. action. Seals porosities in welds
Excellent for preventing rust and and metal parts. Secures set
corrosion in extreme chemical / Revolultionary semisolid stick screws and other assemblies
environmental conditions. formula is high strength and after settings are completed.
Localized heat and hand tools best suited for fasteners up to Seals welds and porous metal
are required to separate parts. 3/4". Semisolid formula offers parts. Protects threads from rust
Solvents will not weaken the added convenience and portability. and corrosion. Localized heating
adhesive bond. Localized heat and hand tools are and hand tools are needed for
required to separate parts. disassembly.
Part No. Our
Size 1-444- Net Price Part No. Our Part No. Our
Size 1-444- Net Price Size 1-444- Net Price
10 ml bottle -26221 $11.20
50 ml bottle -26231 31.10 9 gm tube -37685 $11.40 10 ml bottle -29021 $11.20
250 ml bottle -26241 108.10 19 gm tube -37686 24.00 50 ml bottle -29031 31.10
Threadlocker Gel
50 ml Hand 7649™
Pump Primer N™ Medium Strength Threadlocker Blue Gel
Reliably secures all nut and bolt applications
1/4" to 1" (6mm to 25mm). Locks and seals while
preventing parts from loosening due to vibration.
Protects threads from corrosion. Removable with
hand tools for easy disassembly.
Portable, precision,
bottle-top application High Strength Threadlocker Red Gel
threads directly onto
and 50 mL anaerobic 4.5 oz Aerosol Ideal for reliably securing all permanent nut
bottle. They are Part No. and bolt applications 3/8" to 1" (10mm to
designed to dispense 25mm) and greater. Locks and seals while
1-444-21348 preventing parts from loosening due to
at any angle in drop
sizes, without leaks Our Net Price vibration. Protects threads from corrosion.
Requires heat or special tools for removal.
or product waste. $2111
Part No. Our
Part No. Decreases set-up time of threadlockers
Description 1-444- Net Price
1-444-98414 and increases breakaway torque on most
5 gm Medium Strength Gel Squeeze ™
-24005 $6.50
10 gm Medium Strength Gel Twist™ -24010 11.85
Our Net Price fastener surfaces. Allows application of
threadlockers in cold weather. Contains 5 gm High Strength Gel Squeeze™ -27005 6.50
$8974 no ozone-depleting compounds. 10 gm High Strength Gel Twist™ -27010 11.85
Pipe Joint
Compound
564™ General
Economical, general
1 Pint Brush-top Can
Purpose Thread
purpose pipe thread
sealant that won't shred Part No. 1-444-30557 Sealant
like tape and allows easy Our Net Price
disassembly. Resists Cures rapidly to provide immediate low 50 ml Tube
common shop fluids. $735 pressure sealing. Its lower strength allows Part No. 1-444-28754
easy disassembly, and is recommended
even on larger (>2") diameter pipes. Our Net Price
Protects mated threaded areas
from rust and corrosion.
$1853
2" x 6' Tape Pipe Repair Kit
Pipe Part No. 1-444-96321
Our Net Price
Repair $3855 567™ PST® High
Kit Temperature
Urethane impregnated fiberglass tape, activated by Thread Sealant
water, for reliable temporary repairs of metal, plastic,
and composite pipes. Includes Loctite® Fixmaster® This product has excellent solvent
Metal Magic Steel™ epoxy stick, urethane impregnated resistance, allows easy assembly,
fiberglass tape, and gloves. Cures in 30 minutes. prevents galling, and can withstand 6 ml Tube 50 ml Tube
temperatures up to 400°F. Excellent
for high pressure applications: locks Part No. Part No.
and seals tapered metal, pipe threads 1-444-56707 1-444-56747
Slic-Tite® Paste and fittings. Ideal for stainless steel, Our Net Price Our Net Price
aluminum, galvanized metal, and
with PTFE other inert metals. disassembles $514 $1620
with hand tools.
FEATURES:
• Greater sealing power from more PTFE
(polytetrafluorethylene) particles.
• For use on metal, PVC, CPVC
and ABS plastic pipe threads.
• Great for sealing water, air, steam, natural gas, QuickStix™
LP gas, refrigerants, ammonia, gasoline and oil.
• Not for use on Oxygen service.
• Non-toxic, non-drying.
561™ PST®
• Sealing temperature range: -50°F to 500°F. Pipe Sealant
• Working pressures: 3,000 PSI (204 BAR) 19 gm Tube
for gas, 10,000 PSI (680 BAR) for liquids.
• USDA approved.
Formulated specifically for metal tapered pipe Part No.
thread fittings, this product cures rapidly to 1-444-37127
provide immediate low pressure sealing.
1/4 Pint Angle brush-in-cap 1/2 Pint Angle brush-in-cap Controlled lubricity prevents galling and Our Net Price
Part No. 1-443-41209 Part No. 1-443-41219
Our Net Price Our Net Price
protects from rust and corrosion. Can be
used on fittings up to 2" in diameter.
$1075
$790 $1320
545™ Hydraulic /
Thread Sealant Pneumatic
with Teflon® Thread Sealant
Contains no fillers or particles that could contaminate
Economical general-purpose fitting system fluids, foul valves, or clog fine filters and
sealant. Outperforms tapes and 16 oz. Can screens. Suitable for fittings up to 2" in diameter.
Excellent solvent resistance.
pipe dopes. Seals and resists Part No.
pressure in air, oil, diesel fuel and 1-444-80633 Part No. Our
hydraulic systems. Remains pliable Description 1-444- Net Price
at high and low temperatures. Our Net Price
10 ml. Bottle -32429 $9.80
Temperature range -65°F to 300°F;
resists common shop fluids.
$1380 50 ml. Bottle -54531 31.00