Beruflich Dokumente
Kultur Dokumente
01. You are developing a proposal for a new HPE customer that is concerned about managing
mixed server vendors in their environment.
Which feature should you highlight in your proposal to address the customer’s concern?
A. Redfish API
B. OneView RESTful API
C. Intelligent Provisioning
D. System Management Homepage
Answer: A
02. A customer is expanding their blade based infrastructure with HPE Synergy platform. The
customer is familiar with HPE Virtual Connect Manager and wants to know if the same
management procedures can be used to manage HPE Synergy platform.
How should you answer the customer’s concern?
A. HPE Synergy can be managed by HPE Composer, which is running an embedded version
of the HPE OneView.
B. HPE Synergy must be managed with HPE Systems Insight Manager
C. HPE Synergy supports Virtual Connect modules, so it can be managed using Virtual
Connect Manager
D. HPE Synergy can be managed using Virtual Connect Manager as long as an additional
license is purchased
Answer: C
03. A customer has an existing Hadoop installation built on DL380 Gen9 24SFF servers. You need
to review their existing installation and provide recommendations on how to achieve their stated
storage density goal of over 5PB per server cabinet.
Which HPE solution should you recommend?
Answer: C
04. A customer needs to migrate their current c7000 network and Fibre Channel infrastructure
to a converged network.
Which interconnect module should the customer use?
A. HPE Flex10
B. HPE 8Gb Fibre Channel pass-through
C. HPE FlexFabric 20/40 F8
D. HPE 16Gb/24-port Fibre Channel switch
Answer: C
05. A customer is planning an expansion and they are considering iLO Amplifier as their future
firmware management tool. They need to plan their budget and learn which additional licenses
will be required.
What is the minimum license that will meet this customer’s upgrade path needs?
Answer: B
06. A customer uses VLANs in their network. They recently acquired another company and need
to extend the number of VLANs to 7400 to accommodate the growth.
What should you advise?
Answer: D
07. A customer has c7000 enclosures with Virtual Connect 20/40 F8 interconnect modules
providing Ethernet and Fibre Channel connectivity. They are starting a proof of concept (PoC) to
evaluate using a Synergy with the HPE Virtual Connect SE 40Gb F8 interconnect module as the
next generation infrastructure.
Which additional component is required to enable the proof of concept solution to match the
connectivity functionality of the current solution?
A. Image Streamer
B. a Fibre Channel license
C. OneView Advanced
D. iLO Advanced Premium Security
Answer: B
08. A solution architect wants to verify compatibility between a CNA and a 3PAR system. The
Solution Architect is looking for reference material on SAN components, configuration support,
and best practices.
What should you use?
Answer: C
09. A customer that runs a database server needs high speed access to the database files.
Which internal storage technology offers the best performance?
A. SAS Nearline
B. NVMe
C. SAS HDD
D. SATA HDD
Answer: B
10. A customer is planning a new virtualization project and requests assistance with preparing a
proposal for his management team.
Which financial information can be generated using the Alinean toolset? (Choose two.)
A. licensing costs
B. payback period
C. cash flow
D. bill or materials
E. roles and responsibilities
Answer: BC
11. What is required to enable Jitter Smoothing technology? (Choose two.)
A. HPE Apollo
B. ProLiant Gen 10
C. HPE Synergy
D. HPE Cloudline
E. iLO5 Advanced
Answer: BE
12. You need to demonstrate the runtime firmware verification scan functionality on a ProLiant
DL380 Gen10 server. You find that the option is not available in the UEFI interface.
What is the most likely cause of the problem?
Answer: D
Answer: B
14. A customer purchased HPE ProLiant Gen10 servers. The customer is transitioning from a
physical to a virtual environment.
Which feature should be enabled to ensure that they get the optimal performance from their
new servers?
Answer: C
15. A customer is using HPE Smart Update Manager (SUM) for firmware update. They plan to add
100 Gen10 ProLiant servers, and they are concerned about whether HPE SUM will be able to
support this size of installation.
What other option could the customer use for firmware updates that has increased scalability?
Answer: D
16. A customer plans to expand in the future to an HPE Synergy installation with SAS connectivity.
What should you explain to the customer regarding SAS connectivity?
A. External storage devices can be connected to the SAS Synergy switches only if they
were installed prior Composer configuration
B. SAS connectivity will require additional licenses
C. It will be not possible to add SAS connectivity to the existing environment if the logical
enclosure is configured
D. SAS connectivity is supported only in the first fabric, so it should not be used for any
other connections
Answer: D
17. Your customer is interested in Synergy and composable infrastructure. They are concerned
that operational savings may not meet expectations since operating system installation
consumes a great deal of time.
Which feature should you highlight to overcome the objection?
Answer: D
18. A c7000 customer wants to expand their server environment. You want to encourage them
to move to Synergy to prepare them for the future.
Which question-should you ask?
Answer: A
Answer: D
20. A customer has 10 HPE BladeSystem enclosures managed by HPE OneView. They want to add
three HPE Synergy frames.
What is a proper procedure to manage a new HPE Synergy installation?
Answer: B
While installing a three frame Synergy solution, only two of the frames are identified during the
discovery process. What should you do to get resolution?
Answer: D
21. Refer to the exhibit.
You are installing three Synergy frames for a customer PoC in the configuration shown. The
composer is unable to discover the frames.
What is the most likely cause of the problem?
Answer: A
22. You have a customer who has thousands of ProLiant servers spanning Gen8, Gen9, and Gen10
across multiple server models (Rack, Tower, Blade, Apollo), all licensed with iLO Advanced. The
customer needs an effective way to inventory and update the firmware across the environment.
Which tool should you recommend?
A. iLO Amplifier Pack
B. OneView
C. Intelligent Provisioning
D. SUM (System Update Manager)
Answer: A
23. A customer has a ProLiant DL based Gen10 server solution hosting an I/O intensive 2TB
database. The customer needs to dramatically increase the performance of their existing system.
Which solution will provide the maximum performance possible for their application?
Answer: A
24. A customer needs a Synergy Proof of Concept (PoC) using Image Streamer.
What is the minimum number of Synergy frames needed for this PoC?
A. 1
B. 2
C. 3
D. 5
Answer: C
25. What are features of the HPE Synergy Planning Tool? (Choose two.)
Answer: CE
26. A customer needs a VDI solution. The amount of compute per U of rack space will be a key
point in their solution selection.
Which HPE product would be an ideal solution as part of your RFP response?
Answer: C
27. A customer recently purchased HPE ProLiant Gen10 servers, but finds that their application
does not appear to benefit from the newest Xeon processors.
Which features should be configured in the BIOS to overcome the issue?
Answer: C -----A
28. A customer needs a solution to support Online Transaction Processing (OLTP) and database
workloads.
Which Gen10 technology would optimize the environment for the customer?
A. REST API
B. Silicon Root of Trust
C. workload profiles
D. OneView
Answer: C
29. A customer received their three frame Synergy system. However, they are missing a link cable
that connects the frame link module between the frames.
Which type of cable do they need?
A. DAC
B. MPO
C. CAT6A
D. AOC
Answer: A
30. A customer wants to implement a large Microsoft Storage Spaces Direct environment.
Which protocol should the customer use?
A. VXLAN
B. RDMA
C. OSPF
D. NVGRE
Answer: D
31. Your customer has completed a successful Synergy Proof of Concept (PoC) consisting of a
single frame with dual composers and dual Virtual Connect SE 40Gb F8 modules.
The customer wants to:
. add a second frame before they move into production
. have unified management
. have a separate logical enclosure for each frame
What are the basic steps to add the second frame? (Choose three.)
Answer: ABE
32. A customer is installing multiple racks of DL380 Gen10 servers in a datacenter. They need to
configure each one with identical BIOS settings.
Which tools are available to solve the situation? (Choose two.)
Answer: EF
33. A financial customer has a remote office that requires a significant amount of computing
resources, but has no local IT staff. They need simple and affordable management and disaster
recovery of their site.
Which solution should you recommend to meet this customer’s needs?
Answer: B
34. A customer needs a new high frequency trading cluster. Their current cluster has non-
deterministic performance and undesirable latency. Because high frequency trades are
extremely time-sensitive transactions, the customer cannot tolerate the microseconds of delay
that can randomly occur on their current cluster.
Which iLO 5 Gen 10 feature can you propose to address this technical requirement?
A. Turbo Cores
B. Jitter Smoothing
C. Persistent Memory
D. NVMe Drives
Answer: B
35. Which iLO 5 feature allows a customer to directly, physically connect to a ProLiant server to
troubleshoot issues?
A. iLO Federation
B. iLO Amplifier Pack
C. iLO mobile app
D. iLO Service Port
Answer: D
36. Your customer is building out their own object-based storage solution. They initially
developed the object store using DL380 Gen9 servers but are now looking for a solution that is
purpose built to provide the additional storage.
Which solution should you recommend?
A. DL580 Gen10
B. Apollo 4510 Gen10
C. ML350 Gen10
D. DL560 Gen10
Answer: B
37. An environmentally sensitive customer has a data center that operates with fresh air cooling.
Which feature of HPE ProLiant Gen10 servers makes them suitable to operate in this
environment?
A. HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Support
B. Intel® Xeon-Platinum 8180M Support
C. ASHRAE A4 compliance
D. ACPI 6.1 Compliance
Answer: C
38. A retail customer’s real-time analytics application requires the fastest possible data access
and over 768GB of database capacity. Their current HPE ProLiant DL380 Gen9 servers are not
meeting the performance requirements.
What should you recommend? (Choose two.)
Answer: CD
39. During a presentation on Synergy fabric technology, a customer states that they would not
purchase Virtual Connect modules because they would be paying for Fibre Channel technology
that they have no intention of using.
How should you handle this objection?
A. Explain to the customer that the only Fibre Channel support is through FCoE and does
not add to the module cost.
B. Explain to the customer that HPE does not pass on the cost of including Fibre Channel
support to the customer.
C. Inform the customer that native Fibre Channel support is an optional, licensed feature.
D. Inform the customer that native Fibre Channel support is provided through an optional
daughterboard.
Answer: D
40. A customer has thousands of ProLiant and Apollo servers in their datacenter. The customer
needs a tool that will help them with firmware and driver updates.
Which iLO Amplifier Pack feature should you emphasize during a conversation with this
customer?
Answer: B
41. A customer is considering installing a Synergy frame in an existing rack where their c7000
chassis is currently installed.
Which question-should you ask to ensure the new frame will be supported in the rack?
Answer: B
42. Your customer boots to the HPE Smart Scripting toolkit via PXE to automatically configure
their new systems. They are moving to a new data center which has a policy that PXE boot will
not be allowed in the environment.
What is the closest alternative to use when deploying Gen10 in their new data center?
Answer: D
43. A customer is expanding their blade based infrastructure managed by HPE OneView with an
HPE Synergy platform. The customer is familiar with HPE OneView and wants to know if the same
management can be used to manage HPE Synergy platform.
How should you respond to this question?
A. HPE Synergy can be managed using the same HPE OneView instance that is used to
manage HPE BladeSystem platform.
B. HPE Synergy can be managed using HPE OneView as long as a separate, dedicated HPE
OneView appliance is deployed for HPE Synergy management.
C. HPE Synergy can be managed by HPE Composer, which is running an embedded version
of the HPE OneView
D. HPE Synergy must be managed with HPE Systems Insight Manager
Answer: B or C
Answer: A
45. What must a customer consider when adding an uplink set to a Logical Interconnect Group?
(Choose two.)
Answer: BC
46. One of the DL380 Gen10 servers in your infrastructure has failed to boot after a 3rd party
PCle NIC was installed.
What is the most likely cause of this issue?
Answer: C
47. Your customer has 500 SY480 Gen10 compute nodes running a variety of physical and virtual
workloads. They are looking for a way to get a unified view of the entire environment.
Which product should you recommend?
Answer: B
48. A customer has installed a D3940 storage module in an existing Synergy frame. However,
none of the compute modules can access the shared storage.
What is the problem?
Answer: B
49. A customer asks for a network technology that will maximize throughput and minimize
latency and CPU utilization across servers using SMB Direct and 10Gb Ethernet.
Which technology should you propose?
Answer: B
50. Where can you find customer-ready HPE content to describe the benefits of a solution you
are recommending?
Answer: A
51. Your customer needs to provide an automated, energy-aware environment that will
automatically track power usage and document configurations.
Which HPE technology will meet your customer’s needs?
Answer: C
52. A customer has a two frame Synergy setup with two Virtual Connect SE 40Gb F8 modules and
two 20Gb Interconnect Link Module interconnect modules. The customer needs to expand into
a third frame.
Which interconnect modules should be used to extend the logical enclosure?
Answer: A
53. A customer uses VLANs for tenant network separation. However, they are not satisfied with
the scalability limits of the setup.
Which networking technology will help the service provider to overcome these performance
limits?
Answer: C
54. A customer wants a highly available storage solution inside HPE Synergy that is comparable
via OneView and also accessible outside the enclosure to a DR site at another location.
Which product fits the customer’s needs?
Answer: A
55. A hospital has an HPE ProLiant environment consisting of G7 and Gen8 servers. They have a
new regulatory requirement to improve security of the management interface.
What should the customer do to meet their requirements?
Answer: C
56. A customer needs to update the system bios on their DL380 Gen10. They are unable to
download the latest Service Pack for ProLiant.
What is the most likely cause of the problem?
Answer: B
A. HPE Cloudline
B. HPE Apollo
C. ProLiant Gen 10
D. iLO5 Advanced
E. HPE Synergy
Answer: CD
58. A customer plans to replace their c7000 equipment with Synergy.
What is the most important thing to consider about installing Synergy in the existing rack
environment?
Answer: A
59. A customer needs a server that: supports their in-memory database is oriented towards
business critical workloads
Which questions should you ask before you make a recommendation? (Choose two.)
Answer: AD
60. A customer is designing an infrastructure and plans to host multiple tenants in the
environment. The customer needs several thousand network segments to be used on a single
physical network.
Which solution should the customer use?
Answer: C
61. Which product automatically generates reports on collected lifecycle management events?
Answer: C
62. A customer exceeded the number of available VLANs on their network. To resolve this issue,
they enabled VXLAN. They inquire about upgrading their servers with the FlexFabric 650 series
NIC after this change.
What is the benefit of tunnel offload?
Answer: D
63. You prepared a proposal for a customer that plans to deploy Hyper-V clusters that include
network adapters with RoCE support. The customer would like to know why this specific adapter
was included in the proposal.
How would you explain your choice?
A. RoCE adapters offer Secure Encryption functionality that can help to secure migration
traffic
B. RoCE adapters are the only adapters certified to use in Hyper-V based cluster
C. RoCE adapters can use 100 Gb/s speed for internal virtual machine migrations
D. RoCE adapters will improve performance for live migration and Microsoft SMB Direct
environments
Answer: D
64. A customer wants to use the automated zoning feature of HPE OneView. A customer
complains that this functionality does not work, even if 3PAR and CPGs are added to HPE
OneView.
Which other steps must be performed before automated zoning can be used? (Choose two.)
Answer: DE
65. While preparing to implement a Synergy solution, you notice the uplinks are all rated at
10Gb/s and consume four of the HPE Virtual Connect SE 40Gb F8 Module ports. They want to
maximize free ports for future growth.
Which change would improve the design and increase customer satisfaction?
A. Use a QSFP+ transceiver and AOC in place of the SFP+ DAC cables.
B. Use a QSFP+ AOC, and remove the SFP+ DAC cables and QSFP+ to SFP+ adapters.
C. Use a QSFP+ DAC splitter cable, and remove the SFP+ DAC cables and QSFP+ to SFP+
adapters.
D. Use a MPO to Quad LC splitter cable in place of the SFP+ DAC cables.
Answer: C
66. A health care customer is running out of space in their small on-site data center. They need a
solution for their next generation infrastructure for their hospital and clinics. Proposed
infrastructure needs the ability to run ESXi 6.5 with around 100 medium sized VMs customer has
five remote clinics each clinic needs to be able to run approximately 10 VM’s locally all of the
VM’s in the clinics need to be fully backed up every night
What is the most appropriate solution to lead with?
Answer: A
67. A customer is experiencing high latency in an Apollo r2200 Gen9 SFF system. They want to
upgrade performance with new units.
Which servers in the Apollo line will increase performance while maintaining similar architecture?
(Choose two.)
Answer: BE
68. A customer has adopted the RESTful API standard for managing an HPE server’s
infrastructure. They need to have a single location to monitor all Synergy and BladeSystem
resources.
Which HPE solution accomplishes this task?
Answer: C
69. A customer is considering deploying a significant number of HPE BladeSystem Gen10 servers
with an HPE 3Par storage solution for a new cloud solution. You propose HPE OneView as the
management platform.
Which HPE OneView feature should you emphasize during conversations with the customer?
Answer: D
70. A customer is planning a new virtualization project and requests assistance with preparing a
proposal for his management team.
Which financial information can be generated using the Alinean toolset? (Choose two.)
A. licensing costs
B. payback period
C. cash flow
D. bill or materials
E. roles and responsibilities
Answer: BC
71. Match each Synergy component with the description of the functionality it provides.
72. A customer needs to install Red Hat 7.2 on a few DL380 Gen10 systems. Which tool should
be used for this deployment?
A. Image Streamer
B. Insight Control server provisioning (ICsp)
C. Intelligent Provisioning
D. OneView
Answer: C
73. A customer has seven HPE Proliant servers. They need to reduce time to problem resolution.
Which HPE service should you recommend?
Answer : A
74. You are configuring a new server for a customer. The customer has given you the following
information regarding their environment: -2 processors with 22 cores - 256 GB RAM - 600GB of
usable internal storage - 10GB network, dual connections - iLO Advanced - 3 years of 7X24 basic
support. Which additional information do you need to determine the best option for internal
storage?
Answer : C
75. Match each HPE technology solution to the customer's business need that it can fulfill.
Answer :
76.
77.
78. Which options does a customer have for managing a datacenter with HPE Smart Update
Tools? (Select two)
Answer: CD
79. A customer is running an Online Transaction Processing (OLTP) application that requires high-
speed access to the application files with a minimal latency. Which internal storage technology
offers highest performance?
A. AM2 SATA
B. NVMe SSD
C. SAS SSD
D. SATA SSD
Answer: B
80. A customer wants to migrate their existing datacenter operations from 2U DL380 G7 servers
to a 1U Gen10 server with equivalent sockets available.
A. DL386 Gen10
B. DL360 Gen10
C. DL560 Gen10
D. DL380 Gen10
Answer: B
81. A customer temporarily needs to add an additional network connection to a provisioned
server that is being actively managed by OneView. The server is currently powered down. Which
top level option should they click as the first step?
82. A customer wants to use iLO Federation to manage firmware deployments with HPE SUM.
Which options are included? (Select two.)
A. Update the iLO firmware and system ROM offline through the iLO Federation group
B. Update all applicable firmware on HPE ProLiant servers through the iLO using offline
deployment
C. Apply updates to all members of iLO Federation group with an iLO standard license
D. Automatically discover iLO Federation groups on the same management network
E. iLO federation is leveraging ICsp functionality to update firmware
Answer: B,C
83. You are introducing Synergy to a new customer. Which tool can you use to demonstrate the
physical components of the Synergy frame and how they connect?
A. HPE PartSurfer
B. HPE Synergy Planning Tool
C. HPE Product Bulletin
D. HPE Product Tour
Answer: B
84.