Beruflich Dokumente
Kultur Dokumente
ON
“Testing of Surge Arresters as per latest
Standards: IEC 60099-4 and IS 15086-4 ”
( 19th January 2018 )
Organized by
HIGH VOLTAGE DIVISION
Central Power Research Institute
(Govt. of India Society, Ministry of Power)
Prof. Sir. C.V.Raman Road, P.B. No.8066, Sadashivanagar P.O. , Bengaluru - 560 080, India
Web: www.cpri.in
ABOUT THE WORKSHOP
Surge arrester is an important component in power system used for
over voltage protection. This protects equipment from lightning and switching
over voltages due to lightning and switching operation. Different types of
arresters were in use and recent trend is to use gapless metal oxide surge
arresters in most of the cases. The testing of surge arresters before
installation at site is very important for their successful operation at site.
These surge arresters undergo various Routine, Acceptance and Type tests as
per the National / International Standards. The Type tests which validate the
basic design of arrester elements and assembly are carried out in a third party
independent testing laboratory. The quality of assembly part of manufacturing
process is checked through routine tests carried out on every assembled
arrester in the factory. The acceptance tests are carried out on a
predetermined number of samples either in the manufacturing premises or in a
third party laboratory. As these tests prove the basic design and quality of
assembled product, It is very important that the engineers witnessing either
the Routine / Acceptance test at manufacturer premises or Type tests at third
party laboratory shall have a good knowledge and understanding of the
various tests to be conducted, and the interpretation of test results. A practical
exposure of the witnessing engineers to various tests that are conducted in
third party laboratory on surge arrester blocks and assembled arresters is
essential. In addition the witnessing engineers shall also have an
understanding of the equipment required for testing, its accuracy, and
calibration requirements etc. in order to witness the tests more authoritatively
and interpreting the test results more confidently. A Knowledge of basics of
surge arresters and the generation, measurement and calibration of impulse
currents will aid the witness engineer to enhance the knowledge.
The workshop will expose the participants to various topics related to the
surge arresters.
TOPICS COVERED:
Basics of metal oxide arrester.
Testing of arresters (Type, routine and acceptance).
Demonstration of the type tests which include:
- Lightning, switching impulse residual voltage measurement
- operating duty test, repetitive charge transfer capability test,
temporary over voltage test and reference voltage measurement on
ZnO blocks in the laboratory.
Demonstration of routine and acceptance tests on arresters like :
VENUE
Impulse Current Laboratory, Central Power Research Institute, Prof. Sir.
C.V. Raman Road, Sadashivanagar P.O, Bengaluru-560080
REGISTRATION
1) Delegates from Industry: Rs. 5,000/- * + 18% GST
2) Faculty Members of any Educational Institution & Utilities /
Electricity Boards (DISCOMs & Govt. Utilities only): Rs.3,500/- + 18
% GST
3) Students: Rs.2,500/- + 18 % GST
Registration fee includes kit, course notes, certificate, Lunch & Tea on the day
of the workshop.