Beruflich Dokumente
Kultur Dokumente
Phototransistor Optocoupler
Product Selection
Cathode 2 3 Emitter
Cathode 2 5 Collector
CNY17-2 • A 63 125 70 • 1
3 4 Emitter
CNY17-3 • A 100 200 70 • 1
CNY17-4 • A 160 320 70 • 1
AC Input Optocoupler
Single Channel HCPL-814 • A 20 300 35 • 1
4 pin HCPL-814-00A • A 50 150 35 • 1
Anode
Cathode 1 6 Base HCPL-354 • 20 400 35 • 1
Anode
Cathode 2 5 Collector HCPL-354-00A • 50 150 35 • 1
NOTES: 1. VDE 0884 with option 060. A. Wide-lead spacing (10.16mm) with opotion W00.. * Option 00L, 00A, 00B, 00C, 00D is available. ** Option 00A, 00B, 00C, 00D is available.
In switched-mode power supplies, optocouplers are the Other typical applications include:
perferred choice for providing isolated feedback for the • I/O or Microprocessor Interfacing
regulation loop. For this application, they do an excel- • Regulation Feedback Circuits in SMPS
lent job of isolation, minimizing circuit complexity and • Interface between Logic Circuits
reducing cost. • Ground Loop Elimination
• Level Shifting
Typical Switched-mode Power Supply Block Diagram Programmable Logic Controller I/O Units
VOUT Input Isolation Output Isolation
VIN Transformer AC/DC
Rectifier
Switch
Control Circuit
Logic Circuit
Error Amplifier
& Comparator Input CPU Output
General-Purpose
Optocoupler
www.agilent.com
www.agilent.com/semiconductors
300 mil 4-pin DIP 400 mil 4-pin 0.4” Lead Spacing Option
TYPE NUMBER 7.62 ± 0.3
7.62 ± 0.3 6 4 (0.3)
OPTION CODE (0.3)
4 3
300 mil 4-pin Lead Bend SMD Option 300 mil 6-pin DIP
TYPE NUMBER 7.62 ± 0.3
6 4 (0.3)
7.62 ± 0.3 6 5 4
(0.3) OPTION CODE
0.35 ± 0.15/-0.10
6.5 ± 0.5 (0.14) A 4N25 V 6.5 ± 0.5 (0.256)
(0.256)
PIN ONE DOT
YYWW
1.0 ± 0.25 DATE CODE
(0.039) 1 2 3
1 3 0.35 ± 0.15/-0.10
10.16 ± 0.03 (0.14)
(0.4) 7.3 ± 0.5
(0.287) 7.62 ~ 9.98
4.6 ± 0.5
(0.181)
3.5 ± 0.5
(0.138)
3.5 ± 0.5 0.35 ± 0.25
(0.138) (0.014)
3.3 ± 0.5 0.5 (0.02) TYP
2.8 ± 0.5 (0.110) (0.13)
1.2 ± 0.1
(0.047)
0.5 ± 0.1
2.54 ± 0.25 DIMENSIONS IN MILLIMETERS AND (INCHES) (0.02) DIMENSIONS IN MILLIMETERS AND (INCHES)
2.54 ± 0.25 (0.1)
(0.1)
400 mil 6-pin 0.4” Lead Spacing Option 400 mil 6-pin Lead Bend SMD Option
7.62 ± 0.3
7.62 ± 0.3 6 5 4 (0.3)
6 5 4 (0.3)
0.35 ± 0.15/-0.10
(0.14)
2.54 ± 0.25
1.2 ± 0.1 (0.1)
2.8 ± 0.5 (0.110) (0.047) DIMENSIONS IN MILLIMETERS AND (INCHES)
DIMENSIONS IN MILLIMETERS AND (INCHES)
0.5 ± 0.1
(0.02)
2.54 ± 0.25 (0.1)
2.00 ± 0.2
www.agilent.com/semiconductors
E-mail: SemiconductorSupport@agilent.com
Data subject to change.
Copyright © 2002 Agilent Technologies, Inc.
Obsoletes 5988-5327EN
December 2, 2002
5988-8368EN