Beruflich Dokumente
Kultur Dokumente
10. Bolt 6 (M8x25 Button + nut flange) 11. Insert windshield bar in front pocket
12. Insert central bar in middle top 13. Position Top on the car and secure it
with nuts (do not tighten)
14. Tighten bolt 1 while you pull the door 15. Tighten bolts 2,3,4 while you pull the
channel out door channel out
16. Release Top buckles and verify front 17. Tighten windshield bar nut 30Nm
fabric on windshield seal
18. Remove plastic covers from roll cage 19. Fit Roomerang
(pull)
20. Fix tailgate plate (help yourself with 21. Fix central bar lifter
some tape)
22. Pull the top from upper part of rear 23. Insert plastic strip in channel
belts
Part n. JLFT .. 4
1. Fit rollcage covers (safety belts can stay in or out) 2. Insert cargo bar
9. Insert front part of plastic strip 10. Pull belt 1 from both sides keeping
window centrally
11. Wrap vertical window around roll cage 12. Close the top upper belt
13. Insert all plastic strip with special 14. Place tailgate bar and fix velcro giving
attention to corners to the top the right tension