Beruflich Dokumente
Kultur Dokumente
q/w Festo core product range qReady for dispatch from the Festo factory in 24 hours
Covers 80% of your automation tasks Held in stock in 13 service centres worldwide
More than 2200 products
Look for the star!
Worldwide: Always in stock wReady for dispatch in 5 days maximum from stock
Superb: Festo quality at an attractive price Assembled for you in 4 service centres worldwide
Easy: Reduces procurement and storing complexity Up to 6 x 1012 variants per product series
One-way flow control valves
Key features
Function
Flow control or one-way flow control
valves regulate the piston speed of
flow control valve GRLA or GRLZ, the
flow control function works in one dir
The flow control function creates an
adjustable annular gap inside the
-H- Note
pneumatic drives during advance and ection only (exhaust air or supply air); valve. This gap can be increased or de The documentation for the flow
return strokes. This is done through the non-return function works in the creased by turning the knurled screw control valves can be found at
suitable restriction of the flow rate of opposite direction. With the flow or slotted head screw. The required è www.festo.com/catalogue
compressed air in exhaust air or control valve GRLO, the flow control restriction can be set with the help of
supply air direction. With the one-way function is active in both directions. this adjustment component.
General information
Standard nominal flow rate qnN Exhaust air one-way flow control Flow measurement circuit
function
The standard nominal flow rate qnN is Pressure gauge Pressure gauge
the flow rate based on standard Flow meter
conditions at an operating pressure of (flow measuring device)
p1 p2
p1 = 6 bar and an output pressure of
Test specimen
p2 = 5 bar, measured at room
Supply air one-way flow control
temperature t = 20 °C.
function
Flow control valve
Standard flow rate qn
p1 Operating pressure
The standard flow rate is measured at p2 Output pressure
an operating pressure of p1 = 6 bar
and an output pressure with respect
Flow control function in both
to atmospheric pressure (p2 = 0 bar).
directions
1
1 Supply port (pneumatic connection 1)
2 2 Working line (pneumatic connection 2)
Single-acting cylinder with one-way flow control valve Single-acting cylinder with flow control valve
Exhaust air and supply air one-way flow control function Flow control function in both directions
Adjustable speed during advance and Speed adjustment through flow control
return strokes. The flow rate can be on both sides is often applied in the
adjusted differently for both directions. case of single-acting or small cylinders.
The benefit of this application lies in its
simplicity.
Application examples
Mini slide SLT with one-way flow Flat cylinder DZF with one-way flow Multimount cylinder DMM with
control valve, standard control valve, mini one-way flow control valve, mini
Version Valve function Version Type Connection Pneumatic Pneumatic qnN1) Adjustment è Page/
direction connection 1 connection 2 component Internet
[l/min]
Standard Metal
Exhaust air one- GRLA Elbow outlet QS-3, QS-4, M5, GÁ, G¼, 100 … 1,580 Slotted head 8
way flow control QS-6, QS-8, GÅ, G½ screw
function QS-10, QS-12
Knurled screw
M5, GÁ, G¼, M5, GÁ, G¼, 95 … 4,320 Slotted head 12
Gy, G½, G¾ Gy, G½, G¾ screw
M5, GÁ, G¼ M5, GÁ, G¼ 95 … 610 Knurled screw
PK-3, PK-4, M5, GÁ, G¼ 83 … 540 Slotted head 12
PK-6 screw
Supply air one- GRLZ Elbow outlet QS-3, QS-4, M5, GÁ 100 … 215 Slotted head 8
way flow control QS-6, QS-8 screw
function
VFOC-S Elbow outlet QS-4, QS-6 Push-in 100 … 270 Slotted head 20
sleeve2) QS-4, screw
QS-6
Nickel-plated metal
Exhaust air one- VFOH-LE Elbow outlet QS-4, QS-6, GÁ, G¼ 180 … 530 External hex 22
way flow control QS-8, QS-10
function
Polymer
Exhaust air one- GRLA Elbow outlet QS-6, QS-8 GÁ, G¼, GÅ 520 … 650 Knurled screw 24
way flow control
function
Flat Polymer
Exhaust air one- VFOF Elbow outlet QS-6, QS-8 GÁ, G¼ 250 … 650 Internal hex vfof
way flow control
function
Version Valve function Version Type Connection Pneumatic Pneumatic qnN1) Adjustment è Page/
direction connection 1 connection 2 component Internet
[l/min]
Mini Metal
Exhaust air one- GRLA Elbow outlet QS-3, QS-4 M3, M5 40 … 41 Slotted head 26
way flow control screw
function
M3 M3 0 … 18 Slotted head 29
screw
Supply air one- GRLZ Elbow outlet QS-3, QS-4 M3, M5 41 … 48 Slotted head 26
way flow control screw
function
M3 M3 0 … 18 Slotted head 29
screw
In-line Metal
installation One-way flow GR/GRA Inline M3, M5, GÁ, M3, M5, GÁ, 29.5 … 3,300 Knurled screw gr
control function G¼, Gy, G¼, Gy,
G½, G¾ G½, G¾
Polymer
One-way flow GR Inline QS-3, QS-4, QS-3, QS-4, 40 … 250 Knurled screw gr
control function QS-6, QS-8 QS-6, QS-8
Function Metal
combination Exhaust air one- GRXA Elbow outlet QS-4, QS-6, GÁ, G¼ 130 … 280 Slotted head 34
way flow control QS-8 screw
function
Polymer
Exhaust air one- VFOF Elbow outlet QS-6, QS-8 GÁ, G¼ 240 … 590 Internal hex vfof
way flow control
function
GRLA/GRLSA/GRGA/CRGRLA/GRLZ/GRGZ
GRLA – x – QS – 6 – – – D
Type
Exhaust air one-way flow control function
GRLA One-way flow control valve, elbow outlet
GRLSA One-way flow control valve, elbow outlet with rotary knob
GRGA One-way flow control valve, parallel outlet
CRGRLA One-way flow control valve, elbow outlet, corrosion-resistant
GRXA-HG One-way flow control valve, function combination
Pneumatic connection 2
M3, M5, x, Male thread
¼, y, ½,
¾
Pneumatic connection 1
Connection type
– Female thread (connection size as for connection 2)
QS Push-in connector QS
PK Barbed connector
Adjustment component
– Slotted head screw
RS Knurled screw
Generation
B B series
C C series
D D series
VOFC
VOFC – S – S6 – Q6
Type
VOFC One-way flow control valve, elbow outlet
Valve function
S Supply air one-way flow control function
Pneumatic connection 2
S4 Push-in sleeve QS-4
S6 Push-in sleeve QS-6
Pneumatic connection 1
Q4 Push-in connector QS-4
Q6 Push-in connector QS-6
VOFH-LE
VOFH – L E – A – G18 – Q6
Type
VOFH One-way flow control valve
Design
L L-shaped outlet
Valve function
E Exhaust air one-way flow control function
Adjusting element
A External hex
Pneumatic connection 2
G18 Thread Gx
G14 Thread G¼
Pneumatic connection 1
Q4 Push-in connector QS-4
Q6 Push-in connector QS-6
Q8 Push-in connector QS-8
Q10 Push-in connector QS-10
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
GRLA/GRLZ-M5 GRLA/GRLZ-M5
qnN [l/min]
qn [l/min]
n n
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
GRLA/GRLZ-x GRLA/GRLZ-x
qnN [l/min]
qn [l/min]
n n
GRLA-x-…-MF/GRLA-¼ GRLA-x-…-MF/GRLA-¼
qnN [l/min]
qn [l/min]
n n
GRLA-y GRLA-y
qnN [l/min]
qn [l/min]
n n
GRLA-½ GRLA-½
qnN [l/min]
qn [l/min]
n n
Materials
Sectional view
1 One-way flow control valve
1 Knurled head (only Anodised wrought aluminium alloy
2
3 GRLA-…-RS)
2 Adjusting screw Brass
4 3 Hollow bolt (only Anodised wrought aluminium alloy
GRLA-…-RS)
5 4 Releasing ring POM
5 Swivel connection Die-cast zinc, chromed
6
6 Threaded plug Wrought aluminium alloy
GRLA/GRLZ-M5: Brass
– Seals NBR
Note on materials RoHS-compliant
Knurled screw
M5 QS-3 100 60 … 100 145 150 … 170 14 q197576 GRLA-M5-QS-3-RS-D
QS-4 110 65 … 110 165 140 … 160 q197577 GRLA-M5-QS-4-RS-D
QS-6 115 70 … 110 185 145 … 170 q197578 GRLA-M5-QS-6-RS-D
Gx QS-3 130 100 … 130 180 200 … 220 23 q197579 GRLA-x-QS-3-RS-D
QS-4 160 120 … 190 250 270 … 300 q197580 GRLA-x-QS-4-RS-D
QS-6 185 160 … 240 370 330 … 390 q197581 GRLA-x-QS-6-RS-D
QS-8 215 175 … 250 400 330 … 410 24 q534337 GRLA-x-QS-8-RS-D
G¼ QS-6 400 290 … 420 600 570 … 680 50 q534338 GRLA-¼-QS-6-RS-D
QS-8 475 325 … 500 720 610 … 760 q534339 GRLA-¼-QS-8-RS-D
QS-10 480 345 … 500 760 630 … 790 q534340 GRLA-¼-QS-10-RS-D
Gy QS-6 495 320 … 495 740 840 … 890 72 q534341 GRLA-y-QS-6-RS-D
QS-8 820 450 … 850 1,300 1,080 … 1,420 q534342 GRLA-y-QS-8-RS-D
QS-10 900 540 … 975 1,400 1,160 … 1,620 q534343 GRLA-y-QS-10-RS-D
G½ QS-12 1,580 925 … 1,605 2,220 1,910 … 2,500 124 q534344 GRLA-½-QS-12-RS-D
Festo core product range qReady for dispatch from the Festo factory in 24 hours
wReady for dispatch in 5 days maximum from stock
1) -H- Note: This product conforms to ISO 1179-1 and ISO 228-1.
1) -H- Note: This product conforms to ISO 1179-1 and ISO 228-1.
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
GRLA/GRLZ-M5 GRLA/GRLZ-M5
qnN [l/min]
qn [l/min]
n n
GRLA/GRLZ-x GRLA/GRLZ-x
qnN [l/min]
qn [l/min]
n n
GRLA/GRLZ-¼ GRLA/GRLZ-¼
qnN [l/min]
qn [l/min]
n n
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
GRLA-y GRLA-y
qnN [l/min]
qn [l/min]
n n
GRLA-½ GRLA-½
qnN [l/min]
qn [l/min]
n n
GRLA-¾ GRLA-¾
qnN [l/min]
qn [l/min]
n n
Materials
Sectional view
1 One-way flow control valve
2 1 Adjusting screw Brass
2 Swivel connection Die-cast zinc
3 Threaded plug Wrought aluminium alloy
GRLA/GRLZ-M5: Nickel-plated brass
3 – Seals NBR
Note on materials RoHS-compliant
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Knurled screw
M5 M5 95 76 … 95 169 135 … 170 12 151163 GRLA-M5-RS-B
Gx Gx 340 260 … 420 615 470 … 760 30 151169 GRLA-x-RS-B
G¼ G¼ 610 450 … 820 1,200 885 … 1,615 59 151175 GRLA-¼-RS-B
Knurled screw
M5 M5 95 76 … 95 169 135 … 170 12 151186 GRLZ-M5-RS-B
Gx Gx 340 260 … 420 615 470 … 760 30 151192 GRLZ-x-RS-B
G¼ G¼ 610 450 … 820 1,200 885 … 1,615 59 151198 GRLZ-¼-RS-B
This one-way flow control valve offers There are two setting options: 1 Gradual for preselection of the 2 Infinitely variable for precision
the ideal conditions for optimum and flow range in 5 stages via rotary adjustment using internal hex
easy setting of the flow rate in switch: A, B, C, D, E via a scale marked from 0 to 10
a unique design.
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of the position of the flow control screw (scale) n as a function of the position of the flow control screw (scale) n
GRLSA-x GRLSA-x
GRLSA-¼ GRLSA-¼
Materials
Sectional view
One-way flow control valve
1
1 Adjusting screw PA, reinforced
2 2 Swivel connection Die-cast zinc
3 Releasing ring POM
3 4 Hollow bolt Anodised wrought aluminium alloy
– Seals NBR
Note on materials RoHS-compliant
4 Free of copper and PTFE
D D1
GRLSA-x Gx 6 12.5 13.8 15 25.7 36.6 5.1 13.5 2 12 3
GRLSA-¼ G¼ 8 14.5 17.8 18.8 30.75 46.5 7 17.2 3 15 3
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
QS-6 QS-6
QS-4 QS-4
Materials
Sectional view
1 One-way flow control valve
2 1 Adjusting screw High-alloy stainless steel
2 Swivel connection Die-cast zinc
3
3 Releasing ring POM
4 Hollow bolt Black anodised wrought aluminium
alloy
– Seals NBR
4
Note on materials RoHS-compliant
-H- Note
The push-in sleeves of the one-way è www.festo.com/catalogue.
flow control valves VFOC are This combination alone guarantees
exclusively matched to push-in a secure grip in the push-in fitting.
fittings QS from Festo
Standard nominal flow rate qnN at 6 } 5 bar as a function of turns of the adjusting screw n
VFOH-LE-A-G18 VFOH-LE-A-G14
QS-4 QS-8
QS-6 QS-10
QS-8
Materials
Sectional view
One-way flow control valve
1
1 Adjusting screw High-alloy stainless steel
2
2 Swivel connection Nickel-plated brass
3 Releasing ring Nickel-plated brass
3 4 Hollow bolt Wrought aluminium alloy
– Seals FPM
Note on materials RoHS-compliant
4 Free of copper and PTFE
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
qnN [l/min]
qn [l/min]
n n
Materials
Sectional view
1 One-way flow control valve
1 Knurled head Wrought aluminium alloy
2
2 Regulating screw Brass
3 3 Swivel connection PBT, reinforced
4 Releasing ring POM
4
5 Threaded plug Wrought aluminium alloy
– Seals TPE-U(PU)
NBR
5 Note on materials RoHS-compliant
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
GRLA/GRLZ/GRGA/GRGZ-M3 GRLA/GRLZ/GRGA/GRGZ-M3
qnN [l/min]
qn [l/min]
n n
GRLA/GRLZ-M5 GRLA/GRLZ-M5
qnN [l/min]
Materials
Sectional view
1 One-way flow control valve
1 Adjusting screw Brass
2
2 Swivel connection Die-cast zinc
3 3 Releasing ring POM
4 Threaded plug Nickel-plated brass
– Seals NBR
4 Note on materials RoHS-compliant
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
qnN [l/min]
Materials
Sectional view
1 One-way flow control valve
2 1 Adjusting screw Brass
2 Swivel connection Die-cast zinc
3 Threaded plug Nickel-plated brass
– Seals NBR
Note on materials RoHS-compliant
3
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
CRGRLA-M5, CRGRLA-x CRGRLA-M5, CRGRLA-x
qnN [l/min]
qn [l/min]
n n
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
CRGRLA-¼, CRGRLA-y, CRGRLA-½ CRGRLA-¼, CRGRLA-y, CRGRLA-½
qn [l/min]
qnN [l/min]
n n
Materials
Sectional view
1 One-way flow control valve
1 Regulating screw High-alloy stainless steel
2 2 Swivel connection High-alloy stainless steel
3 Hollow bolt High-alloy steel
– Seals FPM, PVC
Note on materials RoHS-compliant
3
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Function example: The function combination consists of Stop function and speed setting in Additional pilot connection 1 for
a one-way flow control valve and one housing crossover interconnection, e.g. for
a piloted non-return valve. Swivel pilot connection 21 perpen stop function with pressure failure
Exhaust air flow control is active as dicular to screw-in direction è Function example
long as a pilot signal from pneumatic
connection 21 is applied. If no pilot
signal is applied, the valve shuts off
the exhaust air. The compressed air
flows unthrottled through the non-
return valve in the supply air
direction.
-H- Note
Additional measures are required for Without additional measures in
use in safety-related applications; in accordance with statutory minimum
Europe, for example, the standards requirements, the product is not suit
listed under the EC Machinery able for use in safety-related sections
Directive must be observed. of control systems.
Standard nominal flow rate qnN at 6 > 5 bar Standard flow rate qn at 6 > 0 bar
as a function of turns of the adjusting screw n as a function of turns of the adjusting screw n
qnN [l/min]
qn [l/min]
n n
GRXA-HG-¼-QS-8, GRXA-HG-¼-QS-8
GRXA-HG-¼-QS-6 GRXA-HG-¼-QS-6
GRXA-HG-x-QS-6 GRXA-HG-x-QS-6
GRXA-HG-x-QS-4 GRXA-HG-x-QS-4
p1 [bar]
Materials
Sectional view
1) Unactuated