Beruflich Dokumente
Kultur Dokumente
AVR-2112CI v CD-ROM
zzD&M Holdings is striving to be a paperless company in order to help preserve the environment. Your cooperation and understanding is appreciated.
zzD&M Holdings s’efforce d’être une société “sans papier” afin de contribuer à préserver l’environnement. Nous sommes sensibles à votre coopération et votre compréhension.
zzD&M Holdings se esfuerza por ser una empresa sin papel para ayudar a conservar el medio ambiente. Se valora su cooperación y comprensión.
ESPAÑOL FRANÇAIS ENGLISH
I
ENGLISH FRANÇAIS ESPAÑOL
n NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO n CAUTIONS ON INSTALLATION
PRÉCAUTIONS D’INSTALLATION
WARNINGS AVERTISSEMENTS ADVERTENCIAS
EMPLAZAMIENTO DE LA INSTALACIÓN
• Avoid high temperatures. • Eviter des températures élevées. • Evite altas temperaturas.
Allow for sufficient heat dispersion when installed in Tenir compte d’une dispersion de chaleur Permite la suficiente dispersión del calor cuando
a rack. suffisante lors de l’installation sur une étagère. está instalado en la consola.
z
• Handle the power cord carefully. • Manipuler le cordon d’alimentation avec • Maneje el cordón de energía con cuidado.
Hold the plug when unplugging the cord. précaution. Sostenga el enchufe cuando desconecte el cordón z z
• Keep the unit free from moisture, water, and dust. Tenir la prise lors du débranchement du cordon. de energía.
• Unplug the power cord when not using the unit for • Protéger l’appareil contre l’humidité, l’eau et la • Mantenga el equipo libre de humedad, agua y
long periods of time. poussière. polvo.
• Do not obstruct the ventilation holes. • Débrancher le cordon d’alimentation lorsque • Desconecte el cordón de energía cuando no utilice
• Do not let foreign objects into the unit. l’appareil n’est pas utilisé pendant de longues el equipo por mucho tiempo.
• Do not let insecticides, benzene, and thinner come périodes. • No obstruya los orificios de ventilación. z
in contact with the unit. • Ne pas obstruer les trous d’aération. • No deje objetos extraños dentro del equipo.
• Never disassemble or modify the unit in any way. • Ne pas laisser des objets étrangers dans l’appareil. • No permita el contacto de insecticidas, gasolina y Wall
• Ventilation should not be impeded by covering • Ne pas mettre en contact des insecticides, du diluyentes con el equipo. Paroi
the ventilation openings with items, such as benzène et un diluant avec l’appareil. • Nunca desarme o modifique el equipo de ninguna Pared
newspapers, tablecloths or curtains. • Ne jamais démonter ou modifier l’appareil d’une manera.
• Naked flame sources such as lighted candles manière ou d’une autre. • La ventilación no debe quedar obstruida por
should not be placed on the unit. • Ne pas recouvrir les orifices de ventilation avec des haberse cubierto las aperturas con objetos como
• Observe and follow local regulations regarding objets tels que des journaux, nappes ou rideaux. periódicos, manteles o cortinas. zzFor proper heat dispersal, do not install this unit in a confined
battery disposal. Cela entraverait la ventilation. • No deberán colocarse sobre el aparato fuentes space, such as a bookcase or similar enclosure.
• Do not expose the unit to dripping or splashing • Ne jamais placer de flamme nue sur l'appareil, inflamables sin protección, como velas encendidas. • More than 12 in. (0.3 m) is recommended.
fluids. notamment des bougies allumées. • A la hora de deshacerse de las pilas, respete la
• Do not place objects filled with liquids, such as • Veillez à respecter les lois en vigueur lorsque vous normativa para el cuidado del medio ambiente. • Do not place any other equipment on this unit.
vases, on the unit. jetez les piles usagées. • No exponer el aparato al goteo o salpicaduras zzPour permettre la dissipation de chaleur requise, n’installez
• Do not handle the mains cord with wet hands. • L’appareil ne doit pas être exposé à l’eau ou à cuando se utilice. pas cette unité dans un espace confiné tel qu’une bibliothèque
• When the switch is in the OFF (STANDBY) l’humidité. • No colocar sobre el aparato objetos llenos de ou un endroit similaire.
position, the equipment is not completely switched • Ne pas poser d’objet contenant du liquide, par líquido, como jarros.
off from MAINS. exemple un vase, sur l’appareil. • No maneje el cable de alimentación con las manos • Une distance de plus de 12 po (0,3 m) est recommandée.
• The equipment shall be installed near the • Ne pas manipuler le cordon d’alimentation avec les mojadas. • Ne placez aucun matériel sur cet appareil.
power supply so that the power supply is easily mains mouillées. • Cuando el interruptor está en la posición OFF zzPara la dispersión del calor adecuadamente, no instale este
accessible. • Lorsque l’interrupteur est sur la position OFF (STANDBY), el equipo no está completamente equipo en un lugar confinado tal como una librería o unidad
(STANDBY), l’appareil n’est pas complètement desconectado de la alimentación MAINS. similar.
déconnecté du SECTEUR (MAINS). • El equipo se instalará cerca de la fuente de
• L’appareil sera installé près de la source alimentación de manera que resulte fácil acceder • Se recomienda dejar más de 12 pulg. (0,3 m) alrededor.
d’alimentation, de sorte que cette dernière soit a ella. • No coloque ningún otro equipo sobre la unidad.
facilement accessible.
II
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
Preparation
Thank you for purchasing this DENON product.
This manual explains the Setup Wizard that you will need to perform directly after removing the product from its packaging, before you start using the product.
The Setup Wizard displays easy to follow guidance on your television screen that shows you how to connect and configure speakers, various other devices, and network functions for full enjoyment of this unit.
Contents
About this manual Cautions on handling
Read before use ·····································································1
nnOperation buttons • Before turning the power on
Accessories·····················································································1 The operations described in this manual are based mainly on Check once again that all connections are correct and that there are
About this manual·········································································1 remote control operation. no problems with the connection cables.
Setup Wizard
Cautions on handling·····································································1
nnSymbols • Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When going on vacation or leaving home
Preparing the Setup Wizard··············································2 v This symbol indicates a reference page on which
for long periods of time, be sure to unplug the power cord from the
related information is described.
power outlet.
Setup Wizard············································································4 m This mark indicates the page of the owner’s manual on • About condensation
the CD-ROM provided. If there is a major difference in temperature between the inside of
Playback (Basic operation)················································7 the unit and the surroundings, condensation (dew) may form on
This symbol indicates a supplementary information
the operating parts inside the unit, causing the unit not to operate
and tips for operations.
Important information···································································7 properly.
Selecting the input source····························································7 This symbol indicates points to remember operations If this happens, let the unit sit for an hour or two with the power
Playback
Adjusting the master volume·······················································8 NOTE
or function limitations. turned off and wait until there is little difference in temperature
Turning off the sound temporarily···············································8 before using the unit.
nnIllustrations • Cautions on using mobile phones
Note that the illustrations in this manual is for explanation purposes Using a mobile phone near this unit may result in noise. If that
and may differ from the actual unit. occurs, move the mobile phone away from this unit when it is in use.
nnAbout the CD-ROM • Moving the unit
Accessories (Getting Started / Owner’s manual) Turn off the power and unplug the power cord from the power
outlet. Next, disconnect the connection cables to other system units
Check that the following parts are supplied with the product. before moving the unit.
q Getting Started......................................................................... 1 • About care
w CD-ROM (Owner’s manual)..................................................... 1 You need to have Adobe Reader® installed on your computer to • Wipe the cabinet and control panel clean with a soft cloth.
e Warranty (for North America model only)................................. 1 view the owner’s manuals on the CD-ROM. • Follow the instructions when using a chemical cleaner.
r Service network list.................................................................. 1 Click the Adobe Reader® banner in the CD-ROM menu to install • Benzene, paint thinner or other organic solvents as well as
t Remote control unit (RC-1156)................................................. 1 the Adobe Reader® (for Windows). insecticide may cause material changes and discoloration if brought
y R6/AA batteries........................................................................ 2 into contact with the unit, and should therefore not be used.
u Setup microphone (DM-A409).................................................. 1
i AM loop antenna...................................................................... 1
o FM indoor antenna................................................................... 1
t u i o
1
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
z Connect the speaker cables to the main unit using the Setup Wizard.
C SBL
SL SR SL SR
FL Front speaker (L) • Install the surround speakers in a position 2 to 3 ft (60 to 90 cm) higher than
FR Front speaker (R) ear level.
C Center speaker Surround
Remote control unit / Setup microphone SW Subwoofer speaker Surround back speaker
SL Surround speaker (L) Front
R6/AA batteries (supplied) speaker (When 7.1-channel installed)
SR Surround speaker (R) 2 – 3 ft /
(supplied) 60 – 90 cm
• Point slightly downwards
SBL Surround back speaker (L)
SBR Surround back speaker (R)
2
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
Preparation
2 onnect this unit to the television using an HDMI cable
C 3 Turn the television power on, and switch the video input to
(sold separately) this unit (HDMI input)
For details on how to operate the television, see the television instruction manual.
NOTE
If this unit is connected using cables other than the HDMI cable, the Setup Wizard
will not be displayed.
Setup Wizard
HDMI IN
(ARC) q Power on
w Switch the input to this unit (HDMI input)
Playback
q Slide the rear lid in the direction of the arrow and remove it.
w Load the two batteries properly as indicated by the marks in the battery compartment.
R6/AA
3
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Setup Wizard
When preparations are complete, start the Setup Wizard.
Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the
instructions on the screen. You can skip or cancel at each section if necessary.
Language Select
Please select the
language for the on
screen menu.
English
Español
Source Setup Please select device.
BD
DVD
[1/2]
Set the language for the instructions on Set the connecting terminals for each TV
2 5
Speaker Connection
Speaker Connection
Remote Setup
Remote Setup
Please select the
speaker configuration Please select the [1/3]
to be used. device you want to
Blu-ray
5.1ch control.
Connect the speakers for surround sound. 7.1ch
CABLE
3 6
Network Setup
Network Setup
Speaker Calibration
Preparation MultEQ XT Please connect LAN cable to ETHERNET port on
rear panel of receiver, and other side of
Detect & Measure (Main) cable to network router.
Please connect Press [ENTER] to next when you finish
microphone. Configure to playback audio files saved connection.
Configure the settings for your speakers, onto a computer or Internet radio.
and for the optimum surround sound for
Measure
your room. These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 91 “Network Setup”).
These settings can be changed in the following menu even after setting the Setup Wizard
(vm page 14 “Set up speakers (Audyssey® Auto Setup)”).
Preparation
Speaker Connection
Please select the
1 Insert the main unit power plug into the wall
socket. 3 Press AMP to set the remote control unit to AMP-
operation mode.
speaker configuration
to be used.
5.1ch
7.1ch
Switch the AMP-operation mode
Others
Setup Wizard
Speaker Connection
• This remote control is a preset remote control that can be used to
control connected devices.
5.1ch is selected for speaker
system. Select Yes to confirm.
To household power outlet
(AC 120 V, 60 Hz)
Power cord
4 Press ON ( Z ) to the this unit.
The power switches on, and the Setup Wizard start screen is
Move to the item that Yes No displayed on the television screen.
you want to configure
using o p.
2 Press ZONE SELECT to switch the zone mode to J
(MAIN ZONE).
Power on
Playback
Speaker Connection
Please connect the
speakers.
Switch the zone mode
Location :CENTER
Terminal :CENTER
NOTE To start the Setup Wizard again after exiting it, select “Setup
Wizard” in the menu (vm page 73 “Menu map”).
During power standby, a minimal amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
5
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Carefully check the left (L) and right (R) channels and
+ (red) and – (black) polarities on the speakers being
connected to the this unit, and be sure to interconnect
the channels and polarities correctly.
Connecting the speaker cables
Peel off about 0.03 ft/10 mm of sheathing from the tip of the
speaker cable, then either twist the core wire tightly or terminate it.
NOTE
• Connect so that the speaker cable core wires do not protrude
from the speaker terminal. The protection circuit may be
activated if the core wires touch the rear panel or if the + and –
sides touch each other (vm page 124 “Protection Circuit”).
• Never touch the speaker terminals while the power supply is FL FR FL FR
SW SW
connected. Doing so could result in electric shock. (When the
Setup Wizard is running, follow the instructions in the Setup C C
Wizard screen for making connections.)
• Use speakers with the speaker impedances shown below.
Speaker terminals Speaker impedance
FRONT
CENTER SL SR
6 – 16 Ω
SURROUND SL SR
SURR. BACK / AMP ASSIGN
SBL SBR
6
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
Preparation
Here, we explain how to perform simple operations.
For details, see the included CD-ROM (Owner’s manual).
Setup Wizard
Also refer to the operating instructions of the connected devices If the remote control unit is in K (ZONE2) mode, the “Source
Make this setting at “Source Delete” (vm page 95).
when playing them. Select” menu will not be displayed when SOURCE SELECT is
• To turn off the source selection menu without selecting an input
pressed.
source, press SOURCE SELECT again.
The currently selected input • When SOURCE SELECT is pressed, the AMP-operation mode starts
Selecting the input source Source Select
source is highlighted. automatically (vm page 105).
Press the input source select button Player Video Tuner Network
(BD, SAT/CBL, TV, NET/USB, DVD, BD SAT/CBL TUNER Favorites
DVD TV Internet Radio
V.AUX, DOCK, TUNER, GAME1, CD GAME1 Media Server
GAME2 or CD) to be played back. DOCK GAME2 Flickr
Playback
The desired input source can be selected USB/iPod V.AUX Pandora
directly. Napster
Rhapsody
7
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
8
www.denon.com D&M Holdings Inc.
V00
Printed in China 5421 10055 005D