Beruflich Dokumente
Kultur Dokumente
Knowledge
1. Tools and equipment must be after used.
A. cleaned C. immediately kept
B. disposed D. sold
2. What do you mean by ECU?
A. Engine Control Unit C. Engine Cut- off Unit
B. Engine Culture Unit D. Engine Current Unit
3. Any kind of visual graphics created to display
A. Sign C. Splice
B. Signage D. Splitter
4. The will tell you the corresponding tools and materials needed.
A. materials C. service procedure/task
B. place D. workshop
5. It is generally used for driving or striking work.
A. Ball peen hammer C. Steel rule
B. Open wrench D. Wooden rule
6. A dial gauge is used to measure .
A. backlash C. gap
B. end space D.
7. It is used for holding or picking small objects.
A. ball peen hammer C. Long nose pliers
B. open wrench D. Socket wrench
8. It is used for measuring stock of different sizes and length.
A. Feeler gauge C. Screwdrivers
B. Metal tape measure D. Torque wrench
B. 212oF D. 240oF
18. A device that produces electrical energy by the chemical
reaction.
A. Airbag C. Engine
B. Cell D. Freon.
19. Which of the following is an information sign?
A. First aid equipment C. No parking
B. High voltage D. relay
PROCESS
27. If you want to cut pipes, which of the following tools must be
used?
A. Hacksaw C. Scissor
B. Long nose D. Scriber
28. Calculation can be solved by using mathematical
.
A. formula C. system
B. strategy D. technique
UNDERSTANDING
32. Do not put objects into the pocket of working clothes.
A. electrical C. sharp
B. metal D. wooden
33. This signal is activated once the driver changes direction and
uses the signal lever.
A. Battery warning C. Turn signal
B. Emergency indicator D. U - signal
34. It represents an electrical connection to the metal body or frame
of the vehicle.
A. Ground C. Plan
B. Pictorial D. Positive
35. One of the factors to be considered when planning and preparing
for the task in order to avoid accident is .
A. materials C. safety
B. place D. skill
36. Always remember the motto “ first”.
A. materials C. safety
B. place D. technique
37. A successful task can be achieved through planning
and preparation
A. careful and proper C. courageous
B. constant D. dedicated
38. Good preparation will boost your .
A. confidence C. skill
B. intelligence D. talent
39. Measuring is a task that needs .
A. cleaning tools C. measuring tools
B. cutting tools D. prying tools
40. Measurement can be applied by means of .
A. driving tool C. measuring tool
B. marking tool D. twisting tool
41. Precision measuring instruments cannot be squarely compared
to the one used for jobs.
A. electrical C. mechanical
B. hit and miss D. penumatic
42. A measuring tool like torque wrench have limited .
A. cost C. tolerance
B. price D. value
43. To check the ignition timing of ignition system, use .
A. flashlight C. strobe light
B. headlight D. warning light
44. The parts that need to be serviced must have a corresponding
data of specifications in a .
A. manual C. specifications
B. sequence D. technical drawing
45. A device that produces stroboscopic effect from ignition pulses.
A. Megger tester C. VOM tester
B. Timing/Strobe light D. Watt tester
46. An instrument that determine if the engine temperature is
normal or overheating.
A. Fuel pump pressure C. Temperature gauge
B. Oil pressure gauge D. Water volume gauge
47. The era of measurement continued to develop into a more suitable and
way.
A. magical C. scientific
B. physical D. spiritual
60. The reason why rings or jewelry are dangerous to wear when
working.
A. Could cause electric shock
B. Could react chemically with oil and solvent
C. Could scratch metal surface of car paint finish
D. Could warp metal object
61. The reason why it is important to use right tools for the right job.
A. Efficiency C. Save money
B. Effectiveness D.All of the choices
PERFORMANCE
62. See to it that the for doing the task is conducive to work,
well ventilated, clean and has good lighting.
A. place C. tools and equipment
B. service procedure/task D. underchassis
63. and must match with the task to be
done.
A. Safety and concern C. Waste and disposal
B. Tools and equipment D. Ventilation and lighting
64. Used parts or compound substance such as oil, grease and used
chemical bottles must be disposed in proper storage bin or container.
A. Waste disposal C. Tools/Equipment
B. Service procedure//task D. Workshop
65. Be sure that aside from tools and equipment, necessary
and fixtures to be used such as bench work and manual of
specifications must be available and ready to use.
A. materials C. PPE
B. place D. safety
66. When the task calls for the removal of parts, use .
A. cleaning tools C. marking tools
B. loosening and tightening tools D. welding tools
67. Measurement can be applied by means of .
C. driving tool C. measuring tool
D. marking tool D. twisting tool
68. The notification is activated once the driver pushes the
emergency button.
C. Battery warning C. High beam light
D. Emergency indicator D. Fog light reminder
69. Always make sure that shop exits are well-marked with an
sign.
A. ENTRANCE C. SHOP
B. EXIT D. STOP
70. Tools and equipment must be after used.
C. cleaned C. immediately kept
D. disposed D. sold