Beruflich Dokumente
Kultur Dokumente
0)
1. Preparation
1) Device: DTU(1 pcs), Power adapter(1 pcs), Router(1 pcs)
2) Provide power: Wall Socket (or cable socket)
(Figure 1)
1) Install on the indoor top floor (the nearest layer to the module, and the distance of
micro-inverse shall not be more than 5 meters).
2) It is installed on the south wall (directly below the middle position of module square).
3) One meter above the ground, 0.8 meters above the corner.
4) Close enough to the router.
3. Install DTU
1) Connect the DTU to the power adapter and plug it into the wall socket (the wall socket is
more than 1 meter above the ground). For example, figure 2 and figure 3.
1
(Figure 2) (Figure 3)
2) Connect the DTU to the power adapter and plug it into the cable socket, and put the socket
on the table (when the table is placed, the table surface is more than 1 meter above the
ground).
Note: table should not be metal or concrete (to prevent impact on 2.4G signal).
3) DTU should be placed vertically up to 90 degrees.
4. Configuration WiFi
1) Connect to wifi with the name of usr-c210 via computer or mobile phone.
(Figure 1)
2) Open the browser, enter 10.10.100.254, the default username and password are admin.
(Figure 2)
2
3) Click the WiFi Setting menu in the left.
(Figure 3)
4) After clicking the search button in the right, then select the WiFi name that DTU wants to
connect to.
(Figure 4)
3
(Figure 5)
(Figure 6)
4
(Figure 7)
(Figure 8)
5
6. Work LED indicator status description
LED
DTU Status RED BLUE GREEN RED+GREEN+BLUE
6
7. Datasheet
Model DTU-W100
RF communication
Communication method 2.4G RF
Communication frequency 2400MHz to 2483.5MHz
Number of channels 5
Communication distance 200M
(empty environment)
Maximum number of components
that can 100 components
be connected
Telecommunication
WIFI communication standard 802.11b/g/n
Data upload time 15 minutes
Powered
Power supply External adapter
Adapter input voltage / frequency 100 to 240 V AC / 50 or 60Hz
Adapter output voltage / current 5V / 2A
Power consumption 1.0W (standard), 5W(maximum)
Environment-structure
Ambient temperature range (°C) -20°C to 55°C
Size (W×H×D) 143mm×33mm×12.5mm
Weight 0.1kg
A fixed way Direct power supply
Display LED indicator
Other
Standard IEC60950 IEC61000-6-2
FCC Part15 Class B / Class C
Standard warranty 2 years