Beruflich Dokumente
Kultur Dokumente
covered electrodes
OK 55.00
Classifications: Approvals:
SFA/AWS A5.1 E7018-1H4R ABS 3H5, 3Y H5
CSA W48 E4918-1 BV 3Y H5
EN ISO 2560-A E 46 5 B 32 H5 CE EN 13479
CWB CSA W48
DB 10.039.03
Det Norske Veritas 4 YH5
Lloyds 3, 3Y H5
RS 3YHH
VdTÜV 00632
898C91
Suggested Welding Currents:
Diameter, in. (mm) Length, in. (mm) Current, A Arc Volts (approximately)
3/32 (2.5) 14 (350) 80-110 22
1/8 (3.2) 18 (450) 110-140 24
5/32 (4.0) 18 (450) 140-200 24
3/16 (5.0) 18 (450) 200-270 24
1/4 (6.0) 18 (450) 215-360 25
Preheat:
Preheat is generally not required with OK 55.00 to prevent underbead cracking. However, preheat should be used with hardenable
steels to prevent the formation of hard heat-affected zones and eliminate tendencies toward quench cracking on cooling. Preheat
may be required when welding heavy sections.