Beruflich Dokumente
Kultur Dokumente
Page 1 of 2
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR AMC
Configuration: 320C & 320C L Excavators AMC00001-UP (MACHINE) POWERED BY 3066
Engine
i01586840
SMCS - 1000-081
Table 1
Required Tools
6. Read the engine speed display (rpm) on the multitach. Refer to Table 2 for the specifications for engine speed at the desired engine
operation.
Table 2
Specifications
Item
New Rebuild Service Limit
Maximum speed with load (4) 1720 rpm (5) 1670 rpm (5) 1620 rpm (5)
https://sissrv:8443/sisweb/servlet/cat.dcs.sis.controller.techdoc.CSSISFormatTechDocForP... 10/5/2005
320C & 320C L Excavators AMC00001-UP (MACHINE) POWERED BY 3066 Engine(... Page 2 of 2
(3) Engine rpm within three seconds after the engine speed dial was placed at position "10"
(4) Pressure is relieved from both pumps (stall condition).
(5) Minimum rpm
(6) AEC switch in the ON position
Note: A New specification is the performance that can be expected for a new machine. A Rebuild specification is the performance that can
be expected after rebuilding the components of a system. Performance beyond the Service Limit is an indication of these problems:
improper maintenance or adjustment, component wear and failure.
Copyright 1993 - 2005 Caterpillar Inc. Wed Oct 5 12:08:10 UTC+0900 2005
All Rights Reserved.
Private Network For SIS Licensees.
https://sissrv:8443/sisweb/servlet/cat.dcs.sis.controller.techdoc.CSSISFormatTechDocForP... 10/5/2005