Beruflich Dokumente
Kultur Dokumente
Fun 4 b
Fun 6
1. How will you order pipe?
Material, schedule (pressure rating & thickness), nominal dia (it is not a inner dia. But a
similar to that in a rounded figure), coating, length
2. Hole in sea water pipe how to fabricate?
3. Shaft alignment draw a diag and ask which shaft to rotate?
Stationery machine shaft to rotate, base on stationary shaft and rotate 180 deg.
4. Hole in refrigerant evap of ecr ac how to rectify?
Collect the refrigerant
Brazing
Ferrule and coupling, connector
5. Pump shaft broken how to manufacture a keyway?
Fix the drill bit in the chuck and shaft in the tool post
High speed steels are alloys that gain their properties from either tungsten or
molybdenum, often with a combination of the two.[8] They belong to the Fe–C–X multi-
component alloy system where X represents chromium, tungsten, molybdenum,
vanadium, or cobalt. Generally, the X component is present in excess of 7%, along with
more than 0.60% carbon.
Carbide tipped drill bits
6. Pump is rotating in clockwise direction when seen from motor side what will be the direction
of thread for impeller nut?
Left hand threaded
3rd may,2018.
Fnt 4b
external
Fun 6
Centrifugal pp overhaul
Close valves, electrical isolation, remove couplings, drain casing, remove cooling
water connection, remove nuts from casing, remove casing, remove the pump with
impeller, remove impeller nut, remove impeller, key, spring with rotatory M.seal
part, remove nuts from bearing cover , remove bearing and shaft, remove stationary
part M.seal with deflector.
What u understand with "light phase mixing with heavy phase" in purifier?
oil mixing with water.