Beruflich Dokumente
Kultur Dokumente
INSTALLAT
NovaFlow & Solid CV
Installation instructions
32-bit version
I N S T A L L A T I ON
Installation instructions for NovaFlow & Solid CV in
Windows XP / Windows Vista / Windows 7, 32- 32-bit versions
Note that hardware keys do not need to be activated unless prompted for.
1. Install the complete software package. By default the installation will not
overwrite any existing program. The program will be placed in a new
folder. Choose Destination Location C:\ or D:\... (whichever is default).
Do not use blanks in the Destination Folder name. This installation will
save all files in the NFS folder, nowhere else. Contact
support@novacast.se for installation password.
4. Check that the hardware key has started to “glow”. This means that it is in
contact with the system.
5. Install MFC-
MFC-files - The Windows system must be updated in order to run
NovaFlow & Solid. Open subfolder “mfc80” in the installed NovaFlow &
Solid folder. Run “vcredist_x86_part1” and “vcredist_x86_part2” (select
the default alternatives).
6. Run NovaFlow & Solid. Run the Default Settings module, choose
“Material” tab and click “OK”. This is necessary in order to set correct
default materials. Such actions must be executed in both 32-bit and 64-bit
versions.
2011-11-22
I N S T A L L A T I ON
Installation instructions for NovaFlow & Solid CV in
Windows XP / Windows Vista / Windows 7, 32- 32-bit versions
1. Open “Key activation” subfolder (in the installed NovaFlow & Solid
folder) and run “hasprusNFS”.
The program will not work until you get the file back (*.v2c).
3. When you have received the file, go to the same folder and open the same
program: “hasprusNFS”.
“hasprusNFS”
4. Select the second tab called “Apply license update” (3). Find your file by
clicking on…… (4) and the click on “Apply update” (5).
1 3
4
2
5
2011-11-22