Sie sind auf Seite 1von 3

DEPAR TMENT OF CHEMICAL AND

MATERIALS ENGINEERING GIK

HAMAD HUSSAIN SHAH


INSTITUTE OF ENGINEERING
SCIENCES AND TECHNOLOGY,
PAKISTAN.
Hamadsh2@gmail.com.

OBJECTIVE
Become a good researcher in my field.
Skills
EDUCATION
MS OFFICE
★ ★★★☆
Aspyn Hysys
Energy Engineering, Master of Science January 2016 – June 2018 ★ ★ ★ ☆☆
Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Polymath
Topi, Pakistan (www.giki.edu.pk) ★ ★ ★ ☆☆
CGPA 3.19/4.0 Matlab
★ ★ ★ ☆☆
Studies focused in Energy technologies, chemical processes, designing of equipments for
various processes and understanding of various methodologies.

Chemical Engineering, Bachelor of Science October 2011 – September 2015


University of Wah, Wahcantt, Pakistan (www.wecuw.edu.pk)
CGPA 3.02/4.0

Specialized in chemical engineering. Actively participated in many team projects. Served as


Teaching Assistant for introductory equipments design, responsible for assignment grading,
class review sessions, and one-on-one student meetings.

Pre- Engineering , Higher Secondary School September 2009- August 2011


Army Public School and College,
Kohat, Pakistan
Obtained Percentage 65.5%

Studies focused in engineering subjects such as Mathematics, Algebra, Physics and Chemistry.
Learned basic concepts and applied these concepts to practical issues.

Matriculation, Secondary School


Fauji Foundation model School, Kohat, Pakistan
Obtained percentage 80.5%

PROJECTS

Catalytic Pyrolysis of Polyethylene Waste Under Mild Conditions


My Master degree thesis is on plastic recycling by using catalytic degradation technique. The
catalysts used in this study was clay doped with various metallic oxides. The basic purpose to
use these metallic oxides as an additive to reduce the acidity of the clay catalyst because high
acidity over crack the polymer which leads to the deactivation of the catalyst. A pilot plant were
design to carried out the experimentation which includes reactor, a shell and tube heat
exchanger, expansion chamber and various instrumentation like temperature pressure and flow
indicators. The experiments were carried out under control conditions, and products obtained over
these catalyst were then analyzed with the aid of GCMS.

Solar Energy Measurement System


During my master degree, I worked on the system which is used to monitor different parameters
related to the solar panel like temperature, light intensity, voltage and current and display the
parameters on a LCD display. Here 4 sensors are used to sense the different analog parameter, i.e.
temperature, light, voltage and current. These parameters are sensed using sensors for each
parameter. The output from the sensors are fed to the input pins of the PIC microcontroller with
inbuilt 8-channel ADC with 4 of its channels being used. The output from the sensors is then
accordingly displayed on the LCD display in digital form.

Sun Tracking Solar Panel


During my Master degree, I worked on the solar panel so as to receive maximum radiation from the
sun. The Sun tracking solar panel consists of two LDRs, solar panel, a stepper motor and Micro
controller. Two light dependent resistors are arranged on the edges of the solar panel. The stepper
motor connected to the panel to rotate the panel in the direction of Sun. When the intensity of the
light falling on right LDR is more, panel slowly moves towards right and if intensity on the left LDR is
more, panel slowly moves towards left. In the noon time, Sun is ahead and intensity of light on both
the panels is same. In such cases, panel is constant and there is no rotation.

Production of Acetone from Isopropyl alcohol


During my undergraduate degree, I worked on the acetone production from the dehydrogenation of
isopropyl alcohol. This project includes detailed description of production process. In manufacturing
process, feed drum, vaporizer, heater, reactor, furnace, Cooler, condenser, flash unit, scrubber,
acetone and IPA columns are used along with material and energy balance with their designing
procedure.

Cost Estimation methods of Equipments


During my undergraduate degree, I worked on different methods of cost estimation of equipments
which used in different industries. It was kind of feasibility report.

PROFESSIONAL EXPERIENCE

Graduate Research Assistant


Polymers and Catalysis lab, GIK Institute, Pakistan January 2016 – June 2018

Worked in polymer recycling mainly on polymer catalytic recycling. Worked on catalyst synthesis and
Characterization which is used in polymer degradation process. Worked on designing of various
Equipments like reactor, condenser and other instrumentation which is used in polymer pyrolysis
Process.

Production Engineer, Summer Internship June 2014 – September 2014


Pakistan Ordnance Factories, Pakistan.

Worked on explosive factory of POF. Understood the production process of various ammunition. Mainly
four types of explosives are made i-e artillery ammunition, mortar and rocket ammunition, small bust,
ammunition propellant and demolition explosives. The main material used in these ammunition is
nitroglycerin and dynamite
HONORS & ACHIEVEMENTS

Awarded merit scholarship for study in M.Sc. Energy Engineering in Ghulam Ishaq Khan Institute
of Engineering Sciences and Technology, Pakistan
Awarded Al-kidmat foundation Merit Scholarship in B.Sc. Chemical Engineering.

Das könnte Ihnen auch gefallen