Beruflich Dokumente
Kultur Dokumente
There may need to be some adjustement if you have a dualboot system. but if not ,
it should work correctly.
USEFUL TIP:
To solve the infinite boot loop issue (stuck in Safe Mode) / password lost that
some users are having, you must boot with the DVD/USB (Windows installation disk)
in recovery with Command prompt OR restart the computer (not the reset button) and
HOLD THE SHIFT KEY until you have the advanced option menu and the option to boot
with a Command prompt and type :
* Replace "default" with the identifier of your operation system. (can be seen when
you run bcdedit)
From my personal experience, the UXTHEME patcher was a possible cause of this.
Safe Mode may not work especially with the "Windows 10 Anniversary Update" when CSM
in the bios is "Disabled". (Microsoft issue)
New driver is not installing and an old driver from windows update is getting
installed by itself?
-You had the internet connected and it should be disconnnected when running DDU and
until you re-install the new driver
Requirement:
-Windows Vista SP2 up to Windows 10 May 2019 update 1903 (18362.xx) (anything
higher is at your own risk)
-NVIDIA, AMD, Intel GPUs
-Microsoft .NET Framework 4.6 or higher
Recommended usage:
-You MUST disconnect your internet or completely block Windows Update when running
DDU until you have re-installed your new drivers.
-DDU should be used when having a problem uninstalling / installing a driver or
when switching GPU brand.
-DDU should not be used every time you install a new driver unless you know what
you are doing.
-The tool can be used in Normal mode but for absolute stability when using DDU,
Safemode is always the best.
-If you are using DDU in normal mode, Clean, reboot, clean again, reboot.
-Make a backup or a system restore (but it should normally be pretty safe).
-It is best to exclude the DDU folder completely from any security software to
avoid issues.
-If you encounter issues, read the "Issues and solutions.txt"