Beruflich Dokumente
Kultur Dokumente
USB2
Step 4 : Connect External Devices
HDMI IN 4
Quick Setup Guide
HDMI IN 4
(HDD)
USB1
(HDD)
USB1
Congratulations on the purchase of your new Samsung TV. Read this
setup guide to get your TV up and running quickly. AV IN 2
Connecting an AV device (Blu-ray player, cable/satellite box, etc.) Connecting an audio device
AV IN 2
For the very best picture quality, select HD signal sources and use HDMI cables and connections. Connect your TV to your Home Theater or other audio Analog Audio connection
STOP 1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc. Note that many digital cable programs are not in HD. Check with your video provider to ensure your HD connection (up to 1080p) device to enjoy enhanced sound quality.
Please do not return this unit. 105 Challenger Road Ridgefield Park, NJ 07660-0511 are receiving HD signals. Using an Audio Cable
USB2
If you have problems operating your
Using an HDMI Cable
TV, call: Samsung Electronics Canada Inc. AUDIO IN Device
HDMI OUT Device
HDMI IN 4
1-800-SAMSUNG (1-800-726-7864) 55 Standish Court Mississauga, Ontario L5R 4B2
For web support please visit:
Call Center hours of operation: Mon-Sun, 9:00 AM -12 AM EST.
www.samsung.com/support Amplifier / DVD Home Theater
To register this product, visit : www.samsung.com/register. DVD / Blu-Ray player / HD Cable Box /
(HDD)
USB1
The HDMI connection carries HD Satellite receiver (STB)
digital video and audio.
AV IN 2
USB2
AUDIO OUT Device
HDMI IN 4
Follow the steps below to connect the TV to the stand.
DVD / Blu-Ray player /
✎✎ Make sure to distinguish between the front and back of the Stand and Guide
DVI OUT
Connecting a PC
(HDD)
USB1
Cable Box /
Stand when assembling them. Satellite receiver (STB)
AV IN 2
Connect your TV to a PC to use it as a Monitor.
✎✎ Make sure that at least two people lift and move the LCD TV. HD connection
Very Good Connection
✎✎ Lay the product down, with the screen facing up and fasten the screws. Using an D-Sub Cable
PC
Component connection (up to 1080p)
Using a Component Cable
AUDIO OUT COMPONENT OUT Device
Using an HDMI Cable
VCR / DVD / Blu-ray player / Cable Box
/ Satellite receiver AUDIO OUT DVI OUT
2
Good Connection
PC
Stand
Step 5 : Run Plug & Play Plug & Play Plug & Play
After the time zone screen,
The connection method
When you turn on your TV for the first time, it automatically launches Auto Program in Progress. for best HD screen quality
Select the Antenna source to memorise.
the Plug & Play function. With Plug & Play, you can select the On is displayed. Press Right
5 8
DTV Cable : -- Cable : -- Cable 28
Screen Display language, set the clock mode, and launch the TV’s
3 arrow button on your
Air Start
channel memorizing process. It also displays connection instructions Cable Start 15% remote to view each screen
Screw similar to those in this guide. Auto Start Stop in succession. Press the
Menu button to skip this
To navigate while Plug & Play is running, press the Up, Down, Left or
Step 2 : Install the Batteries into the Remote
U Move E Enter m Skip E Enter m Skip section.
Right arrow buttons on your remote. To make a selection, press the
EnterE button. To skip a screen, press the Menu button. The TV memorizes the available channels. This process can take
To install batteries into your remote control, follow these steps: To turn on your TV, press the Power button on the remote or press If your TV is only attached to an antenna, select Air. If your TV is only up to 45 minutes.
the Power button on the TV. To run Plug & Play, follow these steps: attached to cable and you have no cable box, select Cable. If your
1. Lift the cover on the back of the remote upward TV is attached to an antenna and cable with no box, select Auto. Plug & Play
as shown in the figure to the right. When done, press EnterE button on your remote. The Select The Enjoy your TV screen
2. Install two AAA batteries.
Plug & Play Cable System screen appears. Set the Clock Mode.
9 appears. Then press
EnterE button.
✎✎ Make sure to match the + and - ends of
Select Language of the OSD.
English IMPORTANT: If your TV is attached to a cable or satellite box, 6 Clock Mode
Auto
: English
the batteries to the diagram in the battery
compartment. 1 Language Español
: English
skip Steps 3 through 5. After Plug & Play is complete, set your TV to
Channel 3 or 4, according to the directions for your cable or satellite box.
Manual
Français
3. Replace the cover. U Move E Enter m Skip
U Move E Enter Plug & Play
After the TV has memorized the channels, choose the Clock
Selects the cable system.
English - 1
More BN68-02621A-Eng.indd
user manuals 1 on ManualsBase.com 2010-05-14 �� 1:42:48
Basic Functions Selecting a Source Connecting a USB Device for Media Play
To watch a movie on your Blu-ray player or watch You can enjoy photo, music, and movie files TV Rear Panel
Changing the Screen Size Changing the Picture Mode your favorite TV show, you must select the correct stored on a USB device by connecting it to the
source. A source is a device, such as a Blu-ray/ TV and using the Media Play feature. To connect
Your TV has several screen size options, each designed to work best with specific Your TV has three preset Picture Modes with factory adjusted settings, each DVD player, a cable/satellite box, antenna or a a USB device for Media Play, follow these steps:
types of video input. If you have a cable box or satellite receiver, it may have its own designed to give you an excellent picture under specific conditions. cable TV input. Sources can be connected to
USB Drive
set of screen sizes as well. your TV through the HDMI, DVI, Component, 1. Turn on your TV.
The Picture Modes are listed and described in the table below:
To change the screen size, press the P.Size button on your remote. The first time Composite, or D-sub connections, or through the 2. Connect a USB device containing
you press it, your TV displays the current setting. Thereafter, each time you press Antenna or Cable In connections. photo, music and/or movie files
Mode Description
the P.Size button, you change the size of the picture on the screen. To view the signal from a source connected to the HDMI, DVI, Component, to the USB jack on the rear of the
Brightens picture. For a vibrant, enhanced image in brightly lit or TV.
The following sizes are available: Dynamic Composite, or D-sub jack, press the Source button on your remote. Each time
sunny room.
you press the Source button, you change to a different source. 3. When the Application selection
Standard For a bright, detailed picture in a normally lit room. screen appears, press the
Movie For a studio quality cinema picture in a dimly lit or dark room. EnterE button on your remote
Changing Channels and Adjusting the Volume to select Media Play (USB). L Move E Enter R Return
16:9 Wide screen Zoom 1 Zoom 2 1. With the TV on, press the Tools button on your remote.
The Tools menu appears. Volume Channel
✎✎ Screen Fit displays a full HD picture covering the entire screen with no cutoff Viewing the On Screen Menus using the box’s remote.
on any side. It is only available when your TV inputs an HDMI (720p, 1080i, You can also change the
1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal. To view the On Screen Menus, follow these steps:
Menu
channels by pressing the
z buttonsA on B C D A B C D
1. With the power on, press the Menu button Power Indicator
on your remote. The main menu appears. MEDIA.P the front panel of your TV A B C D
The menu’s left side has the following menu and adjust the volume by
options: Picture, Sound, Channel, Setup, pressing the y
Input, Application, and Support. buttons.
Remote control sensor
2. Press the ▲ or ▼ button on your remote to
select a menu option, and then press the EnterE button.
3. When done using the menu, press the Exit button on your remote to exit. Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
Remote Control Buttons and Functions: A B C D
clock, follow these steps:
Displays the channel list on the screen. 6. Press the Return button on your remote when done.
Display the main on-screen menu.
MEDIA.P
View the Media Play. Displays Favorite Channel Lists on the screen.
Quickly selects frequently used functions. Press to display information on the TV screen.
BN68-02621A-03
English - 2