Beruflich Dokumente
Kultur Dokumente
Features
• Glass passivated standard bridge rectifiers
• Ideal for automated placement
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• Solder dip 260 °C, 10 s
• Low profile,Max Height 1.30mm
LPMB
Typical Applications
Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V
Maximum RMS voltage VRMS 140 280 420 560 700 V
Maximum DC blocking voltage VDC 200 400 600 800 1000 V
Maximum average output rectified current Io(AV)(1) 1.0 A
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated IFSM 35 A
load
Rating for fusing(t<8.3ms) I2t 5.0 A2sec
Operating junction and storage TJ,
- 55 to + 150 °C
temperature range TSTG
Typical junction
4.0 V, 1 MHz CJ 15 pF
capacitance
Thermal Characteristics
Parameter Symbol LM102 LM104 LM106 LM108 LM110 Unit
RθJA 60
Typical thermal resistance(1) ℃/W
RθJC 25
Notes: 1. On glass epoxy PCB, mounted on 1.3*1.3mm solder pads
Packing Information
Packing quantities:
4000 pcs/Reel, 15 Reels/Box; 12mm Tape, 13" Reel
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-
Ark product best suited to the customer’s application; they do not convey any license under any intellectual
property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any
third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are subject
to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other
reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an
authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a
product listed herein. The information described here may contain technical inaccuracies or typographical
errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other
loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou
Good-Ark Electronics Co., Ltd. by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making
a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd.
assumes no responsibility for any damage, liability or other loss resulting from the information contained
herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in
whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on
these materials or the products contained herein.