Beruflich Dokumente
Kultur Dokumente
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50B02-00E Apr.20, 2007-00
<<Contents>> <<Index>> 3
Table 1. Sensor type, range, and accuracy.
Accuracy
Reference Measurement Range Minimum Span
Sensor Type Input range A/D Accuracy D/A
Standard (Recommended)
C F C F C F Accuracy
100 to 300 212 to 572 3.0 5.4
B 100 to 1820 212 to 3308 300 to 400 572 to 752 1.0 1.8
400 to 1820 752 to 3308 0.75 1.35
200 to 50 328 to 58 0.35 0.63
E 200 to 1000 328 to 1832
-50 to 1000 58 to 1832 0.16 0.29
200 to 50 328 to 58 0.40 0.72
J 200 to 1200 328 to 2192
50 to 1200 58 to 2192 0.20 0.36
200 to 50 328 to 58 0.50 0.90
K 200 to 1372 328 to 2502
50 to 1372 58 to 2502 0.25 0.45
IEC584 200 to 50 328 to 58 0.80 1.44
N 200 to 1300 328 to 2372
50 to 1300 58 to 2372 0.35 0.63
50 to 0 58 to 32 1.0 1.8
0 to 100 32 to 212 0.80 1.44
R 50 to 1768 58 to 3214
100 to 600 212 to 1112 0.60 1.08
600 to 1768 1112 to 3214 0.40 0.72
25 C
T/C 50 to 0 58 to 32 1.0 1.8
(45 F)
0 to 100 32 to 212 0.80 1.44
S 50 to 1768 58 to 3214
100 to 600 212 to 1112 0.60 1.08
600 to 1768 1112 to 3214 0.40 0.72
200 to -50 328 to 58 0.25 0.45 0.02%
T 200 to 400 328 to 752
50 to 400 58 to 752 0.14 0.25 of span
0 to 400 32 to 752 0.80 1.44
400 to 1400 752 to 2552 0.50 0.90
W3 0 to 2300 32 to 4172
1400 to 2000 2552 to 3632 0.60 1.08
ASTM 2000 to 2300 3632 to 4172 0.90 1.62
E988 0 to 400 32 to 752 0.70 1.26
400 to 1400 752 to 2552 0.50 0.90
W5 0 to 2300 32 to 4172
1400 to 2000 2552 to 3632 0.70 1.26
2000 to 2300 3632 to 4172 0.90 1.62
200 to 50 328 to 58 0.30 0.54
L 200 to 900 328 to 1652
50 to 900 58 to 1652 0.20 0.36
DIN43710
200 to 50 328 to 58 0.50 0.90
U 200 to 600 328 to 1112
50 to 600 58 to 1112 0.25 0.45
Pt100 200 to 850 328 to 1562 200 to 850 328 to 1562 0.14 0.25
( 0.10)* ( 0.18)*
Pt200 IEC751 200 to 850 328 to 1562 200 to 850 328 to 1562 0.30 0.54
( 0.22)* ( 0.40)*
Pt500 200 to 850 328 to 1562 10 C 200 to 850 328 to 1562 0.20 0.36
( 0.14)* ( 0.25)*
RTD
JPt100 JIS C1604 200 to 500 328 to 932 (18 F) 200 to 500 328 to 932 0.16 0.29
( 0.10)* ( 0.18)*
SAMA 70 to 40 94 to 40 1.35 2.43
Cu 70 to 150 94 to 302
RC21-4 40 to 150 40 to 302 1.0 1.8
Ni120 70 to 320 94 to 608 70 to 320 94 to 608 0.11 0.20
( 0.08)* ( 0.14)*
mV 10 to 100 [mV] 3 [mV] 12 [ V]
ohm 0 to 2000 [] 20 [] 0.35 []
T01E.EPS
Note 1: A/D accuracy marked with ( )* in the above table is an accracy for Fieldbus communication type.
Note 2: For BRAIN/HART commuincation type, Total Accuracy = (A/D Accuracy/Span + D/A Accuracy)
For T/C input, add Cold Junction Compensation Accuracy ( 0.5C) to the total accuracy.
Example; when selecting Pt100 with measurement range of 0 to 200C.
0.14C 100% of span +0.02% of span = 0.09% of span
200C
Note 3: For differential or average measurement of YTA320, the digital accuracy is as followings ;
<When the types of the sensors are similar (for example, T/C & T/C, RTD & RTD )>
A/D accuracy = A/D accuracy of either two input, whichever is worse 1.5
<When the types of the sensors are dissimilar(for example, T/C & RTD )>
A/D accuracy = Sensor 1 A/D accuracy + Sensor 2 A/D accuracy
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50B02-00E Apr.20, 2007-00
<<Contents>> <<Index>> 4
Table 2. Temperature Coefficient.
Input Range
Sensor Type A/D Coefficient D/A Coeffieicient
C F
100 to 300 212 to 572 (0.530 C0.080 % of reading)
300
B to 1000 572 to 1832 (0.350 C0.021 % of reading )
1000 to 1820 1832 to 3308 (0.140 C)
E -200 to 1000 -328 to 1832 (0.035 C0.042 % of abs.reading)
-200 to 0 -328 to 32 (0.039 C0.020 % of abs.reading)
J
0 to 1200 32 to 2192 (0.039 C0.0029 % of reading)
-200 to 0 -328 to 32 (0.046 C0.020 % of abs.reading)
K
0 to 1372 32 to 2502 (0.046 C0.0054 % of reading)
-200 to 0 -328 to 32 (0.054 C0.010 % of abs.reading)
N
0 to 1300 32 to 2372 (0.054 C0.0036 % of reading)
-50 to 200 -58 to 392 (0.210 C0.032 % of abs.reading)
R
200 to 1768 392 to 3214 (0.150 C)
T/C
-50 to 200 -58 to 392 (0.210 C0.032 % of abs.reading)
S
200 to 1768 392 to 3214 (0.150 C)
-200 to 0 -328 to 32 (0.046 C0.036 % of abs.reading) {0.0088% of span0.007% of (readingLRV)}
T
0 to 400 32 to 752 (0.046 C)
0 to 1400 32 to 2552 (0.100 C0.0040 % of reading)
W3
1400 to 2300 2552 to 4172 (-0.130 C0.020 % of reading)
0 to 1400 32 to 2552 (0.100 C0.0040 % of reading)
W5 (-0.120 C0.020 % of reading)
1400 to 2300 2552 to 4172
-200 to 0 -328 to 32 (0.039 C0.020 % of abs.reading)
L
0 to 900 32 to 1652 (0.039 C0.0029 % of reading)
-200 to 0 -328 to 32 (0.046 C0.036 % of abs.reading)
U
0 to 600 32 to 1112 (0.046 C)
Pt100 -200 to 850 -328 to 1562 ( 0.047 C0.009 % of reading)
[ ( 0.015C0.005 % of reading)]*
Pt200 -200 to 850 -328 to 1562 ( 0.065 C0.012 % of reading)
[ ( 0.023C0.005 % of reading)]*
Pt500 -200 to 850 -328 to 1562 ( 0.047 C0.009 % of reading)
RTD [ ( 0.015C0.005 % of reading)]*
JPt100 -200 to 500 -328 to 932 ( 0.047 C0.009 % of reading)
[ ( 0.015C0.005 % of reading)]*
Cu -70 to 150 -94 to 302 ( 0.320 C0.120 % of reading)
Ni120 -70 to 320 -94 to 608 (0.016 C0.007 % of reading)
[ ( 0.010C0.005 % of reading)]*
mV (0.001mV0.0043 % of abs.reading)
ohm (0.040 Ω0.0088 % of reading)
T02E.EPS
Note 1: A/D Coefficient marked with [ ]* in the above table is an coefficient for Fieldbus communication type.
Note 2: For BRAIN/HART communication type;
Temperature Effect = A/D coeffieicnt D/A coefficient (The data in the table is the coeffcient per 10 C change.)
Example 1; Pt100Ω, 0 to 200 C calibration range, 50 C reading
(0.047 C 50C 0.009%)[200C0.0088%(500)0.007%]
= (0.047 C 0.0045 C)(0.0176 C 0.0035 C )
= ± 0.0726 C [ per 10 C change ]
Example 2; T T/C, 100 to 100 C calibration range, 50 C reading
(0.046 C| 50 C | 0.036%){200C0.0088%[50(100)]0.007%}
= (0.046 C0.018 C)(0.0176 C0.0035 C )
= ± 0.0851 C [ per 10 C change ]
600
E-10.5
R=
0.0236 Digital
External Communication
load range
resistance BRAIN and HART
250
F02E.EPS
R ()
Figure 2. Integral Indicator Display Example.
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50B02-00E Apr.20, 2007-00
<<Contents>> <<Index>> 5
■ MODEL AND SUFFIX CODES
Model Suffix Codes Descriptions
YTA310 ••••••••••••••••••••••••• Temperature Transmitter
YTA320 ••••••••••••••••••••••••• Temperature Transmitter with Dual Sensor Input
■ OPTIONAL SPECIFICATIONS
Item Descriptions Code
Lightning protector Power supply voltage: 10.5 to 32 V DC (9 to 32 V DC for Fieldbus communication
A
type.)
Allowable current: Max. 6000A(140s), repeating 1000A(140s) 100 times
Painting Coating change Epoxy resin coating X1
Munsell code: N1.5 Black P1
Color change Amplifier cover only Munsell code: 7.5BG4/1.5, Jade green P2
Metallic silver P7
Amplifier and terminal Covers Munsell code: 7.5 R4/14 Red PR
Calibration Unit Degree F/Degree R unit D2
Output signal low-side in Output signal low-side: -5%, 3.2 mA DC or less.
Sensor burnout is also set to 'LOW': -2.5%, 3.6 mA DC C1
Transmitter failure *1
NAMUR NE43 Compliant *1 Failure alarm down-scale: output status at CPU failure and
hardware error is -5%, 3.2 mA or less. C2
Sensor burnout is also set to LOW: -2.5%, 3.6 mA DC.
Output signal limits:
3.8 mA to 20.5 mA
Failure alarm up-scale: output status at CPU failure and
hardware error is 110%, 21.6 mA or more. C3
In this case Sensor burnout is High: 110%, 21.6 mA DC.
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50B02-00E Apr.20, 2007-00
<<Contents>> <<Index>> 6
■ OPTIONAL SPECIFICATIONS (For Explosion Protected Types)
For FOUNDATION Fieldbus explosion protected type, see GS 01C50T02-00E
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50B02-00E Apr.20, 2007-00
<<Contents>> <<Index>> 7
■ DIMENSIONS
Unit: mm (Approx. inch)
2-inch horizontal pipe mounting
65.4(2.57)
ø93
102 (3.66)
(4.02)
164
(6.46)
56(2.21)
2-inch pipe, ø60.5(ø2.38)
70(2.76)
90(3.54)
46(1.81) 65(2.56)
111(4.37) Electrical Connection 18.5
(Input signal) Terminal Cover
(0.73)
Electrical Connection
(Output signal)
With Indicator
(Optional)
ø93
Shrouding Bolt (3.66)
(For Explosionproof type)
209.5
(8.25)
191.5 Ground Terminal
(7.54)
Tag Plate
Vertical Pipe Mounting Bracket
(Optional)
46(1.81)
98(3.86)
F03E.EPS
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50B02-00E Aug.11, 2006-00
<<Contents>> <<Index>> 8
Terminals
Terminal Configuration
Power Supply and output terminal
Communication
External Indicator (ammeter) terminal *1
Terminals (BT200 etc.)
Connection hook
Ground terminal
Input Wiring
Single input (YTA310, YTA320)
(A) (A) (A)
1 1 1 1
(+) (B) (A)
2 2 2 2
(B) (B) (B)
3 (–)
3 3 3
(B)
4 4 4 4
5 5 5 5
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50B02-00E Aug.11, 2006-00
Subject to change without notice.