Beruflich Dokumente
Kultur Dokumente
NB, NBH, ND, NDH, NF, NFH, NG, NGH, NR, NRG,
NT, NU, NUH, NY and NYH Series
FITOK Group
FITOK GmbH (Headquarter)
Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany
Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495
FITOK, Inc.
13843 North Promenade Blvd., Suite 750, Stafford, Texas 77477, USA
Tel.: +1 281 888 0077 Fax: +1 281 582 4051
FITOK Incorporated
1-4F, Block C, Zone E, Yingtailong lndustrial Park, Dalang Street,
Longhua District, Shenzhen, 518109, China
Tel.: +86 755 2803 2500 Fax: +86 755 2803 2619
info@fitokgroup.com
www.fitokgroup.com
FK-IC-GV-02-EN-160104
www.fitokgroup.com
Needle Valves 1
01
Nonrotating-stem Needle Valves
ND Series and NDH Series
07
Forged Needle Valves Features
NF Series and NFH Series ◎ Cold drawn bar. ◎ Leak-tight performance testing for every valve with
◎ Two-stem design: thread hardened upper stem and nitrogen/air at the maximum working pressure, but
smooth surface hardened lower stem. not higher than 6000 psig.
◎ Upper stem thread lubricant isolated from system media. ◎ Working pressure up to:
11
◎ Linearly instead of helical movement of the nonrotating NB Series—Stainless steel: 6000 psig (414 bar)
General Purpose Needle Valves lower stem, avoiding galling damage to the seat and tip, Alloy C-276: 6000 psig (414 bar)
as well as reducing the total friction area between the Alloy 400: 5000 psig (345 bar)
NG Series and NGH Series packing and thelower stem. Titanium: 3500 psig (241 bar)
◎ Safety back seating seal in fully open position. Brass: 3000 psig (207 bar)
◎ Panel mounting available. NBH Series—Stainless steel: 10000 psig (690 bar)
17 ◎ Steady and durable fastening of the handle by double ◎ Working temperature:
lock-pins. PTFE: -65°F to 450°F(-54°C to 232°C)
Rising Plug Valves ◎ Handle color options are available. PEEK: -65°F to 500°F (-54°C to 260°C)
NR Series and NRG Series Graphite: -65°F to 1200°F (-54°C to 649°C)
Pressure (psig)
Pressure (bar)
7000 483
Pressure (psig)
4000 276 S SS
Pressure (bar)
Union Bonnet Needle Valves 3500 241 6000 414
Brass Ti
NU Series and NUH Series 3000 ta
ni
207 5000 345
2500 um 172
4000 276
2000 138
3000 207
1500 103
31 1000 69
2000 137
500 35 1000 69
Outside Screw and Yoke (OS&Y) Needle Valves 0 0 0 0
-65 100 300 500 700 900 1100 1300 -65 100 300 500 700 900 1100 1300
NY Series and NYH Series
Temperature (°F) Temperature (°F)
01
Nonrotating-stem Needle Valves
ND Series and NDH Series
07
Forged Needle Valves Features
NF Series and NFH Series ◎ Cold drawn bar. ◎ Leak-tight performance testing for every valve with
◎ Two-stem design: thread hardened upper stem and nitrogen/air at the maximum working pressure, but
smooth surface hardened lower stem. not higher than 6000 psig.
◎ Upper stem thread lubricant isolated from system media. ◎ Working pressure up to:
11
◎ Linearly instead of helical movement of the nonrotating NB Series—Stainless steel: 6000 psig (414 bar)
General Purpose Needle Valves lower stem, avoiding galling damage to the seat and tip, Alloy C-276: 6000 psig (414 bar)
as well as reducing the total friction area between the Alloy 400: 5000 psig (345 bar)
NG Series and NGH Series packing and thelower stem. Titanium: 3500 psig (241 bar)
◎ Safety back seating seal in fully open position. Brass: 3000 psig (207 bar)
◎ Panel mounting available. NBH Series—Stainless steel: 10000 psig (690 bar)
17 ◎ Steady and durable fastening of the handle by double ◎ Working temperature:
lock-pins. PTFE: -65°F to 450°F(-54°C to 232°C)
Rising Plug Valves ◎ Handle color options are available. PEEK: -65°F to 500°F (-54°C to 260°C)
NR Series and NRG Series Graphite: -65°F to 1200°F (-54°C to 649°C)
Pressure (psig)
Pressure (bar)
7000 483
Pressure (psig)
4000 276 S SS
Pressure (bar)
Union Bonnet Needle Valves 3500 241 6000 414
Brass Ti
NU Series and NUH Series 3000 ta
ni
207 5000 345
2500 um 172
4000 276
2000 138
3000 207
1500 103
31 1000 69
2000 137
500 35 1000 69
Outside Screw and Yoke (OS&Y) Needle Valves 0 0 0 0
-65 100 300 500 700 900 1100 1300 -65 100 300 500 700 900 1100 1300
NY Series and NYH Series
Temperature (°F) Temperature (°F)
H1 (Open)
10
F (Max. Panel
H (Open)
Thickness)
G-Panel hole G-Panel hole
11 Stem Type drill drill
E1
E
NB Series
1
L4
2 Panel Mounting L1 L2
3
C1 L3
4 Taper Regulating Ball Soft
5 ◎ NB series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
add -Y to the ordering number. Example: NBSS-FNS2-7-Y
7
8
Dimensions of NB Series
9
H1 (Open)
10
F (Max. Panel
H (Open)
Thickness)
G-Panel hole G-Panel hole
11 Stem Type drill drill
E1
E
NB Series
1
L4
2 Panel Mounting L1 L2
3
C1 L3
4 Taper Regulating Ball Soft
5 ◎ NB series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
add -Y to the ordering number. Example: NBSS-FNS2-7-Y
7
8
Dimensions of NB Series
9
Dimensions of NB Series
Connection Type and Size Dimension, in.(mm) Straight Pattern Angle Pattern
Basic Ordering Orifice Cv
Number Inlet Outlet in.(mm) D
L1 L2 L3 L4 C C1 D E E1 F G H H1
1.42 1.42 1.33 1.33 D
NB□□-ML10-8 10 mm FITOK 10 mm FITOK (36.1) (36.1) (33.8) (33.8)
NB□□-ML12-8 12 mm FITOK 12 mm FITOK
1.52 1.52
(38.6) (38.6) 1.42 1.42
F (Max. Panel
F (Max. Panel
H (Open)
Thickness)
Thickness)
1.56 1.56 (36.1) (36.1)
H (Open)
NB□□-ML14-8 14 mm FITOK 14 mm FITOK G-Panel hole
(39.7) (39.7) G-Panel hole
drill
drill
NB□□-TS6-8-G 3/8" TS 3/8" TS
E
1.13 1.13 1.13 1.13
E
NB□□-MTS12-8-G 12 mm MTS 12 mm MTS (28.6) (28.6) (28.6) (28.6)
NB□□-MTS14-8-G 14 mm MTS 14 mm MTS 0.25 0.85 0.56 0.56 2.50 1.00 0.88 0.38 0.96 3.50 3.50
L1
(6.4) (14.3) (14.3) (63.5) (25.4) (22.5) (9.7) (24.4) (88.9) (88.9)
NB□□-MTS16-8-G 16 mm MTS 16 mm MTS L1 L2
NB□□-MTB14-8-G 14 mm MTB 14 mm MTB 1.50 1.50 1.50 1.50 C L2
(38.1) (38.1) (38.1) (38.1)
NB□□-MTB16-8-G 16 mm MTB 16 mm MTB
NB□□-UMB14-8 14 mm UMB 14 mm UMB 2.92 2.92
(74.1) (74.1) ◎ NBH series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
NB□□-UMB16-8 16 mm UMB 16 mm UMB
add -Y to the ordering number. Example: NBHSS-FNS2-7-Y
NB□□-MS20-8 M20 x 1.5 Male M20 x 1.5 Male
Metric Metric 1.50 1.50
NB□□-MS22-8 M22 x 1.5 Male M22 x 1.5 Male (38.1) (38.1)
Metric Metric Dimensions of NBH Series
NB□□-FNS8-9 1/2 Female NPT 1/2 Female NPT 1.63
1.75 1.75 (41.3) 1.50
NB□□-FNS12-9 3/4 Female NPT 3/4 Female NPT (44.5) (44.5) (38.1)
1.50 Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
NB□□-NS12-9 3/4 Male NPT 3/4 Male NPT (38.1) Cv
Number Inlet Outlet in.(mm) L1 L2 C D E F G H
NB□□-FL12-9 3/4" FITOK 3/4" FITOK
NB□□-ML14-9 14 mm FITOK 14 mm FITOK NBH□□-FNS2-7 1/8 Female NPT 1/8 Female NPT
1.97 1.97 1.61 1.61
(50.0) (50.0) (41.0) (41.0)
NB□□-ML16-9 16 mm FITOK 16 mm FITOK NBH□□-FNS4-7 1/4 Female NPT 1/4 Female NPT 1.13 1.13
(28.6) (28.6)
NB□□-ML18-9 18 mm FITOK 18 mm FITOK 0.39
(10.0) 2.18 0.88 0.75 3.50 1.38 1.25 0.38 1.08 4.12 4.00 NBH□□-NS4-7 1/4 Male NPT 1/4 Male NPT 0.157 0.53 2.17 0.53 0.25 0.96 2.85
(4.0) 0.35 (13.5) (55) (13.5) (6.4) (24.4) (72.5)
NB□□-MTS14-9-G 14 mm MTS 14 mm MTS (22.2) (19.05) (88.9) (34.9) (31.75) (9.7) (27.5) (104.8) (101.6)
NBH□□-FNS4-NS4-7 1/4 Female NPT 1/4 Male NPT
NB□□-MTS16-9-G 16 mm MTS 16 mm MTS 1.41 1.41
NBH□□-FL4-7 1/4" FITOK 1/4" FITOK
(35.8) (35.8)
NB□□-TS12-9-G 3/4" TS 3/4" TS 1.75 1.75 1.13 1.13
(44.5) (44.5) NBH□□-TS4-7-G 1/4" TS 1/4" TS (28.6) (28.6)
NB□□-MTB14-9-G 14 mm MTB 14 mm MTB
NBH□□-FNS4-8 1/4 Female NPT 1/4 Female NPT
NB□□-MTB16-9-G 16 mm MTB 16 mm MTB 0.236 1.31 1.31 0.625 2.50 0.625 0.38 1.09 3.50
NBH□□-FNS6-8 3/8 Female NPT 3/8 Female NPT 0.85 (33.4) (33.4) (15.88) (63.5) (15.88) (9.7) (27.7) (88.9)
2.98 2.98 (6.4)
NB□□-UMB14-9 14 mm UMB 14 mm UMB (75.7) (75.7) NBH□□-NS6-8 3/8 Male NPT 3/8 Male NPT
1.56 1.56 0.39 1.56 1.56 0.875 3.50 0.875 0.38 1.28 4.17
NB□□-MS27-9 M27 x 2 Male Metric M27 x 2 Male Metric (39.7) (39.7) NBH□□-FNS8-9 1/2 Female NPT 1/2 Female NPT 2.18
(10.0) (39.6) (39.6) (22.2) (88.9) (22.2) (9.7) (32.5) (106)
NB□□-FNS12-6 3/4 Female NPT 3/4 Female NPT 1.75 1.14
(44.5) (29.0)
NB□□-TS16-6-G 1" TS 1" TS 1. FITOK means FITOK double ferrule tube fittings,TS means fractional tube socket weld.
NB□□-MTS25-6-G 25 mm MTS 25 mm MTS 1.75 1.75 1.75 1.75 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
0.59 (44.5) (44.5) (44.5) (44.5) 1.14 0.88 5.00 1.70 1.43 0.38 1.28 5.00 4.72
NB□□-MTS28-6-G 28 mm MTS 28 mm MTS (15.0) 3.27 (29.0) (22.2) (127) (43.2) (36.4) (9.7) (32.5) (127) (120) material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
NB□□-PS12-6-G 3/4 PS 3/4 PS
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
2.35 2.35 2.35 2.00
NB□□-ML22-6 22 mm FITOK 22 mm FITOK (59.7) (59.7) (59.7) (51.0) dimensions not shown above,please contact the authorized representative or FITOK Group
NB□□-FNS16-0 1 Female NPT 1 Female NPT
NB□□-MTS25-0-G 25 mm MTS 25 mm MTS
NB□□-TS16-0-G 1" TS 1" TS
0.71 1.97 1.97 1.25 5.50 5.20
NB□□-MTS28-0-G 28 mm MTS 28 mm MTS (18.0) 5.65 (50.0) (50.0) (31.75) (140) (132)
NB□□-PS12-0-G 3/4 PS 3/4 PS
NB□□-PS16-0-G 1 PS 1 PS
1. FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld, MTS means metric tube socket weld,
MTB means metric tube butt weld, UMB means nut + gasket + metric bulge nipple, PS means pipe socket weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
dimensions not shown above, please contact the authorized representative or FITOK Group.
4 Needle Valves Needle Valves 5
Dimensions of NB Series
Connection Type and Size Dimension, in.(mm) Straight Pattern Angle Pattern
Basic Ordering Orifice Cv
Number Inlet Outlet in.(mm) D
L1 L2 L3 L4 C C1 D E E1 F G H H1
1.42 1.42 1.33 1.33 D
NB□□-ML10-8 10 mm FITOK 10 mm FITOK (36.1) (36.1) (33.8) (33.8)
NB□□-ML12-8 12 mm FITOK 12 mm FITOK
1.52 1.52
(38.6) (38.6) 1.42 1.42
F (Max. Panel
F (Max. Panel
H (Open)
Thickness)
Thickness)
1.56 1.56 (36.1) (36.1)
H (Open)
NB□□-ML14-8 14 mm FITOK 14 mm FITOK G-Panel hole
(39.7) (39.7) G-Panel hole
drill
drill
NB□□-TS6-8-G 3/8" TS 3/8" TS
E
1.13 1.13 1.13 1.13
E
NB□□-MTS12-8-G 12 mm MTS 12 mm MTS (28.6) (28.6) (28.6) (28.6)
NB□□-MTS14-8-G 14 mm MTS 14 mm MTS 0.25 0.85 0.56 0.56 2.50 1.00 0.88 0.38 0.96 3.50 3.50
L1
(6.4) (14.3) (14.3) (63.5) (25.4) (22.5) (9.7) (24.4) (88.9) (88.9)
NB□□-MTS16-8-G 16 mm MTS 16 mm MTS L1 L2
NB□□-MTB14-8-G 14 mm MTB 14 mm MTB 1.50 1.50 1.50 1.50 C L2
(38.1) (38.1) (38.1) (38.1)
NB□□-MTB16-8-G 16 mm MTB 16 mm MTB
NB□□-UMB14-8 14 mm UMB 14 mm UMB 2.92 2.92
(74.1) (74.1) ◎ NBH series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
NB□□-UMB16-8 16 mm UMB 16 mm UMB
add -Y to the ordering number. Example: NBHSS-FNS2-7-Y
NB□□-MS20-8 M20 x 1.5 Male M20 x 1.5 Male
Metric Metric 1.50 1.50
NB□□-MS22-8 M22 x 1.5 Male M22 x 1.5 Male (38.1) (38.1)
Metric Metric Dimensions of NBH Series
NB□□-FNS8-9 1/2 Female NPT 1/2 Female NPT 1.63
1.75 1.75 (41.3) 1.50
NB□□-FNS12-9 3/4 Female NPT 3/4 Female NPT (44.5) (44.5) (38.1)
1.50 Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
NB□□-NS12-9 3/4 Male NPT 3/4 Male NPT (38.1) Cv
Number Inlet Outlet in.(mm) L1 L2 C D E F G H
NB□□-FL12-9 3/4" FITOK 3/4" FITOK
NB□□-ML14-9 14 mm FITOK 14 mm FITOK NBH□□-FNS2-7 1/8 Female NPT 1/8 Female NPT
1.97 1.97 1.61 1.61
(50.0) (50.0) (41.0) (41.0)
NB□□-ML16-9 16 mm FITOK 16 mm FITOK NBH□□-FNS4-7 1/4 Female NPT 1/4 Female NPT 1.13 1.13
(28.6) (28.6)
NB□□-ML18-9 18 mm FITOK 18 mm FITOK 0.39
(10.0) 2.18 0.88 0.75 3.50 1.38 1.25 0.38 1.08 4.12 4.00 NBH□□-NS4-7 1/4 Male NPT 1/4 Male NPT 0.157 0.53 2.17 0.53 0.25 0.96 2.85
(4.0) 0.35 (13.5) (55) (13.5) (6.4) (24.4) (72.5)
NB□□-MTS14-9-G 14 mm MTS 14 mm MTS (22.2) (19.05) (88.9) (34.9) (31.75) (9.7) (27.5) (104.8) (101.6)
NBH□□-FNS4-NS4-7 1/4 Female NPT 1/4 Male NPT
NB□□-MTS16-9-G 16 mm MTS 16 mm MTS 1.41 1.41
NBH□□-FL4-7 1/4" FITOK 1/4" FITOK
(35.8) (35.8)
NB□□-TS12-9-G 3/4" TS 3/4" TS 1.75 1.75 1.13 1.13
(44.5) (44.5) NBH□□-TS4-7-G 1/4" TS 1/4" TS (28.6) (28.6)
NB□□-MTB14-9-G 14 mm MTB 14 mm MTB
NBH□□-FNS4-8 1/4 Female NPT 1/4 Female NPT
NB□□-MTB16-9-G 16 mm MTB 16 mm MTB 0.236 1.31 1.31 0.625 2.50 0.625 0.38 1.09 3.50
NBH□□-FNS6-8 3/8 Female NPT 3/8 Female NPT 0.85 (33.4) (33.4) (15.88) (63.5) (15.88) (9.7) (27.7) (88.9)
2.98 2.98 (6.4)
NB□□-UMB14-9 14 mm UMB 14 mm UMB (75.7) (75.7) NBH□□-NS6-8 3/8 Male NPT 3/8 Male NPT
1.56 1.56 0.39 1.56 1.56 0.875 3.50 0.875 0.38 1.28 4.17
NB□□-MS27-9 M27 x 2 Male Metric M27 x 2 Male Metric (39.7) (39.7) NBH□□-FNS8-9 1/2 Female NPT 1/2 Female NPT 2.18
(10.0) (39.6) (39.6) (22.2) (88.9) (22.2) (9.7) (32.5) (106)
NB□□-FNS12-6 3/4 Female NPT 3/4 Female NPT 1.75 1.14
(44.5) (29.0)
NB□□-TS16-6-G 1" TS 1" TS 1. FITOK means FITOK double ferrule tube fittings,TS means fractional tube socket weld.
NB□□-MTS25-6-G 25 mm MTS 25 mm MTS 1.75 1.75 1.75 1.75 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
0.59 (44.5) (44.5) (44.5) (44.5) 1.14 0.88 5.00 1.70 1.43 0.38 1.28 5.00 4.72
NB□□-MTS28-6-G 28 mm MTS 28 mm MTS (15.0) 3.27 (29.0) (22.2) (127) (43.2) (36.4) (9.7) (32.5) (127) (120) material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
NB□□-PS12-6-G 3/4 PS 3/4 PS
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
2.35 2.35 2.35 2.00
NB□□-ML22-6 22 mm FITOK 22 mm FITOK (59.7) (59.7) (59.7) (51.0) dimensions not shown above,please contact the authorized representative or FITOK Group
NB□□-FNS16-0 1 Female NPT 1 Female NPT
NB□□-MTS25-0-G 25 mm MTS 25 mm MTS
NB□□-TS16-0-G 1" TS 1" TS
0.71 1.97 1.97 1.25 5.50 5.20
NB□□-MTS28-0-G 28 mm MTS 28 mm MTS (18.0) 5.65 (50.0) (50.0) (31.75) (140) (132)
NB□□-PS12-0-G 3/4 PS 3/4 PS
NB□□-PS16-0-G 1 PS 1 PS
1. FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld, MTS means metric tube socket weld,
MTB means metric tube butt weld, UMB means nut + gasket + metric bulge nipple, PS means pipe socket weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
dimensions not shown above, please contact the authorized representative or FITOK Group.
Part Number Description
NBSS - FL8 - ML12 - 8WB - GYM - ASF2
6 Needle Valves
Body Outlet Outlet Tip Packing Panel Flow Special Cleaning and
Series Inlet Type Inlet Size Orifice Size Stem Type
Material Type Size Material Material Mounting Handle Pattern Application Packaging
0
0.1
0.2
0.3
0.4
0.5
0.6
0
0
1000
1500
2000
2500
3000
3500
500
-20
-28
ND Series
Features
0.5
-18
◎ Compact design.
of other materials.
◎ Non-rotating stem.
38
100
entering into the valve.
1.0
◎ One-piece forged body.
Bra
ss
◎ Straight and angle pattern.
93
200
Allo
y 40
1.5
0
Temperature (°F)
Temperature (°C)
◎ Working temperature for stem tip:
300
148
2
SS
204
400
PCTFE stem tip: -20°F to 200°F (-28°C to 93°C)
PEEK stem tip: -20°F to 450°F (-28°C to 232°C)
ND Series—Stainless steel: 3000 psig (207 bar)
◎ Leak-tight performance testing for every valve
0
500
260
2.5
35
69
103
138
172
207
241
with nitrogen/air at the maximum working pressure.
◎ Specially designed handle to stop contamination from
Pressure (bar)
(5.6 mm)
(4.0 mm)
(2.0 mm)
Orifice 0.22"
Orifice 0.16"
Orifice 0.08"
1. The graphs are based on PEEK stem tip and Fluorocarbon O-ring.
Pressure (psig)
2. Contact the authorized representative or FITOK Group for curve graph
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
-54
-65
ND Series: Working pressure up to 3000 psig
NDH Series
NDH Series: Working pressure up to 5000 psig
38
100
Nonrotating-stem Needle Valves
316
SS
Buna N : -20°F to 212°F (-28°C to 100°C)
149
300
Temperature (°C)
Temperature (°F)
Fluorocarbon FKM : -20°F to 400°F (-28°C to 204°C)
500
260
0
35
69
103
138
172
310
345
379
207
241
276
Pressure (bar)
Needle Valves 7
Part Number Description
NBSS - FL8 - ML12 - 8WB - GYM - ASF2
6 Needle Valves
Body Outlet Outlet Tip Packing Panel Flow Special Cleaning and
Series Inlet Type Inlet Size Orifice Size Stem Type
Material Type Size Material Material Mounting Handle Pattern Application Packaging
0
0.1
0.2
0.3
0.4
0.5
0.6
0
0
1000
1500
2000
2500
3000
3500
500
-20
-28
ND Series
Features
0.5
-18
◎ Compact design.
of other materials.
◎ Non-rotating stem.
38
100
entering into the valve.
1.0
◎ One-piece forged body.
Bra
ss
◎ Straight and angle pattern.
93
200
Allo
y 40
1.5
0
Temperature (°F)
Temperature (°C)
◎ Working temperature for stem tip:
300
148
2
SS
204
400
PCTFE stem tip: -20°F to 200°F (-28°C to 93°C)
PEEK stem tip: -20°F to 450°F (-28°C to 232°C)
ND Series—Stainless steel: 3000 psig (207 bar)
◎ Leak-tight performance testing for every valve
0
500
260
2.5
35
69
103
138
172
207
241
with nitrogen/air at the maximum working pressure.
◎ Specially designed handle to stop contamination from
Pressure (bar)
(5.6 mm)
(4.0 mm)
(2.0 mm)
Orifice 0.22"
Orifice 0.16"
Orifice 0.08"
1. The graphs are based on PEEK stem tip and Fluorocarbon O-ring.
Pressure (psig)
2. Contact the authorized representative or FITOK Group for curve graph
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
-54
-65
ND Series: Working pressure up to 3000 psig
NDH Series
NDH Series: Working pressure up to 5000 psig
38
100
Nonrotating-stem Needle Valves
316
SS
Buna N : -20°F to 212°F (-28°C to 100°C)
149
300
Temperature (°C)
Temperature (°F)
Fluorocarbon FKM : -20°F to 400°F (-28°C to 204°C)
500
260
0
35
69
103
138
172
310
345
379
207
241
276
Pressure (bar)
Needle Valves 7
8 Needle Valves Needle Valves 9
1
2 Straight Pattern Angle Pattern
3 D D
4
5
6
7
H (Open)
H (Open)
8
9
10
11
L1
L1 L2
C L2
Valve Body Material Connection Type and Size Orifice Dimension, in.(mm)
Item Component Basic Ordering Cv
316 SS 304 SS 321 SS Brass Alloy 400 Number Inlet Outlet in.(mm) L1 L2 C D H
1 Handle Anodized aluminum 0.81
ND□□ -NS2-5 1/8 Male NPT 1/8 Male NPT (20.6)
Stop Pin 0.81
2 Stainless steel (20.6)
ND□□ -NS2-FL2-5 1/8" Male NPT 1/8" Male NPT 0.08 0.32 1.06 1.86
3 Spool Aluminum 0.12
(2.0) (8.1) (26.9) (47.2)
4 Set Screw Stainless steel ND□□ -FL2-5 1/8" FITOK 1/8" FITOK 1.10 1.10
(27.9) (27.9)
Brass Alloy 400/B164 ND□□ -ML3-5 3 mm FITOK 3 mm FITOK
5 Packing Bolt 316 SS/A276 304 SS/A276 321 SS/A276
C36000/B16
6 Backup Ring PTFE/D1710 ND□□ -FNS2-7 1/8 Female NPT 1/8 Female NPT 0.98
0.98 (25.0)
7 O-ring Fluorocarbon FKM, Buna N or Ethylene propylene ND□□ -NS4-7 1/4 Male NPT 1/4 Male NPT (25.0)
8 Washer 316 SS/A276 Alloy 400/B164 0.16 0.39 1.06 1.86
ND□□ -NS4-FL4-7 1/4" Male NPT 1/4" Male NPT (4.0) 0.27 (10.0) (26.9) (47.2)
9 Stem 316 SS/A276 Alloy 400/B164 1.13
ND□□ -FL4-7 1/4" FITOK 1/4" FITOK 1.13 (28.7)
10 Stem Tip PCTFE or PEEK (28.7)
ND□□ -ML6-7 6 mm FITOK 6 mm FITOK
Brass 1.18 1.18
11 Body 316 SS/A182 316 SS/A182 316 SS/A182 Alloy 400/B564 ND□□ -ML8-7 8 mm FITOK 8 mm FITOK
C37700/B283 (30.0) (30.0)
1.06 1.06
Lubricant Molybdenum disulfide-based ND□□ -FNS4-8 1/4 Female NPT 1/4 Female NPT (26.9) (26.9)
1.12 1.12
ND□□ -NS6-8 3/8 Male NPT 3/8 Male NPT (28.6) (28.6)
1.29 1.29
ND□□ -FL6-8 3/8" FITOK 3/8" FITOK (32.8) (32.8)
0.22 0.53 1.12 2.02
(5.6) 0.53 1.40 1.40 (13.5) (28.4) (51.3)
ND□□ -FL8-8 1/2'' FITOK 1/2'' FITOK (35.6) (35.6)
ND□□ -ML10-8 10 mm FITOK 10 mm FITOK 1.30 1.30
(33.0) (33.0)
1.40 1.40
ND□□ -ML12-8 12 mm FITOK 12 mm FITOK (35.6) (35.6)
0.81 0.81
NDH□□-NS2-5 1/8 Male NPT 1/8 Male NPT (20.6) (20.6)
0.08 0.32 1.06 1.86
NDH□□-FL2-5 1/8" FITOK 1/8" FITOK (2.0) 0.12 1.10 1.10 (8.1) (26.9) (47.2)
(27.9) (27.9)
NDH□□-ML3-5 3 mm FITOK 3 mm FITOK
0.98 0.95
NDH□□-NS4-7 1/4" Male NPT 1/4" Male NPT (25.0) (25.0)
0.16 0.39 1.06 1.98
NDH□□-FL4-7 1/4" FITOK 1/4" FITOK (4.0) 0.27 (10.0) (26.9) (50.2)
1.13 1.13
(28.7) (28.7)
NDH□□-ML6-7 6 mm FITOK 6 mm FITOK
1
2 Straight Pattern Angle Pattern
3 D D
4
5
6
7
H (Open)
H (Open)
8
9
10
11
L1
L1 L2
C L2
Valve Body Material Connection Type and Size Orifice Dimension, in.(mm)
Item Component Basic Ordering Cv
316 SS 304 SS 321 SS Brass Alloy 400 Number Inlet Outlet in.(mm) L1 L2 C D H
1 Handle Anodized aluminum 0.81
ND□□ -NS2-5 1/8 Male NPT 1/8 Male NPT (20.6)
Stop Pin 0.81
2 Stainless steel (20.6)
ND□□ -NS2-FL2-5 1/8" Male NPT 1/8" Male NPT 0.08 0.32 1.06 1.86
3 Spool Aluminum 0.12
(2.0) (8.1) (26.9) (47.2)
4 Set Screw Stainless steel ND□□ -FL2-5 1/8" FITOK 1/8" FITOK 1.10 1.10
(27.9) (27.9)
Brass Alloy 400/B164 ND□□ -ML3-5 3 mm FITOK 3 mm FITOK
5 Packing Bolt 316 SS/A276 304 SS/A276 321 SS/A276
C36000/B16
6 Backup Ring PTFE/D1710 ND□□ -FNS2-7 1/8 Female NPT 1/8 Female NPT 0.98
0.98 (25.0)
7 O-ring Fluorocarbon FKM, Buna N or Ethylene propylene ND□□ -NS4-7 1/4 Male NPT 1/4 Male NPT (25.0)
8 Washer 316 SS/A276 Alloy 400/B164 0.16 0.39 1.06 1.86
ND□□ -NS4-FL4-7 1/4" Male NPT 1/4" Male NPT (4.0) 0.27 (10.0) (26.9) (47.2)
9 Stem 316 SS/A276 Alloy 400/B164 1.13
ND□□ -FL4-7 1/4" FITOK 1/4" FITOK 1.13 (28.7)
10 Stem Tip PCTFE or PEEK (28.7)
ND□□ -ML6-7 6 mm FITOK 6 mm FITOK
Brass 1.18 1.18
11 Body 316 SS/A182 316 SS/A182 316 SS/A182 Alloy 400/B564 ND□□ -ML8-7 8 mm FITOK 8 mm FITOK
C37700/B283 (30.0) (30.0)
1.06 1.06
Lubricant Molybdenum disulfide-based ND□□ -FNS4-8 1/4 Female NPT 1/4 Female NPT (26.9) (26.9)
1.12 1.12
ND□□ -NS6-8 3/8 Male NPT 3/8 Male NPT (28.6) (28.6)
1.29 1.29
ND□□ -FL6-8 3/8" FITOK 3/8" FITOK (32.8) (32.8)
0.22 0.53 1.12 2.02
(5.6) 0.53 1.40 1.40 (13.5) (28.4) (51.3)
ND□□ -FL8-8 1/2'' FITOK 1/2'' FITOK (35.6) (35.6)
ND□□ -ML10-8 10 mm FITOK 10 mm FITOK 1.30 1.30
(33.0) (33.0)
1.40 1.40
ND□□ -ML12-8 12 mm FITOK 12 mm FITOK (35.6) (35.6)
0.81 0.81
NDH□□-NS2-5 1/8 Male NPT 1/8 Male NPT (20.6) (20.6)
0.08 0.32 1.06 1.86
NDH□□-FL2-5 1/8" FITOK 1/8" FITOK (2.0) 0.12 1.10 1.10 (8.1) (26.9) (47.2)
(27.9) (27.9)
NDH□□-ML3-5 3 mm FITOK 3 mm FITOK
0.98 0.95
NDH□□-NS4-7 1/4" Male NPT 1/4" Male NPT (25.0) (25.0)
0.16 0.39 1.06 1.98
NDH□□-FL4-7 1/4" FITOK 1/4" FITOK (4.0) 0.27 (10.0) (26.9) (50.2)
1.13 1.13
(28.7) (28.7)
NDH□□-ML6-7 6 mm FITOK 6 mm FITOK
Cleaning and
NFH Series: Working pressure up to 10000 psig
Standard thread pitch should be ignored in the ordering number, others should be specified.
Not suitable for specific product part number selection, not random combinations.
Note: "Part Number Description" is used for composition rules of FITOK product model,
Packaging
FC-02: Special cleaning and packaging for wetted system components to ensure compliance
FC-01
F2 FC-02
Features
MR0175
◎ One-piece forged body.
NACE
S Yes
No
Straight
◎ Upper stem thread lubricant isolated from system media.
Pattern
A Angle
Flow
B Buna-N
O-ring
P PEEK
NDSS - FNS4 - ML8 - 7PE - ASF2
5 (2.0 mm)
(4.0 mm)
(5.6 mm)
ND
"
0.22"
same way as
inlet size
10 10 mm
12 12 mm
Inlet Size
mm
8 8 mm
2 1/8"
4 1/4"
Temperature (°C)
1/
Temperature (°C)
6 6
-54 38 149 260 371 482 593 704 -54 38 148 260 371 482 593 704
6500 448 11000 758
6000 414 10000 690
FRT Female BSPT
Tube Fitting
Metric Tube
FNS Female NPT
Part Number Description
Male BSPT
5500 379
Fractional
Male NPT
9000 620
Inlet Type
5000 345
ML Fitting
31 F9 8000 552
4500 6S F9 2 310 316
Pressure (psig)
1 SS
Pressure (psig)
Pressure (bar)
S
Pressure (bar)
4000 276 7000 483
31
6000 6L 414
NS
3500 241
RT
SS
FL
Br
as
Alloy 400
s
316L SS
304L SS
Material
316 SS
304 SS
321 SS
2000 138
Brass
Body
3000 207
1500 103
1000 69 2000 137
SS
S4
S1
6L
4L
1000 69
M
500 35
B
0 0 0 0
Series
NDH
-65 100 300 500 700 900 1100 1300 -65 100 300 500 700 900 1100 1300
ND
Cleaning and
NFH Series: Working pressure up to 10000 psig
Standard thread pitch should be ignored in the ordering number, others should be specified.
Not suitable for specific product part number selection, not random combinations.
Note: "Part Number Description" is used for composition rules of FITOK product model,
Packaging
FC-02: Special cleaning and packaging for wetted system components to ensure compliance
FC-01
F2 FC-02
Features
MR0175
◎ One-piece forged body.
NACE
S Yes
No
Straight
◎ Upper stem thread lubricant isolated from system media.
Pattern
A Angle
Flow
B Buna-N
O-ring
P PEEK
NDSS - FNS4 - ML8 - 7PE - ASF2
5 (2.0 mm)
(4.0 mm)
(5.6 mm)
ND
"
0.22"
same way as
inlet size
10 10 mm
12 12 mm
Inlet Size
mm
8 8 mm
2 1/8"
4 1/4"
Temperature (°C)
1/
Temperature (°C)
6 6
-54 38 149 260 371 482 593 704 -54 38 148 260 371 482 593 704
6500 448 11000 758
6000 414 10000 690
FRT Female BSPT
Tube Fitting
Metric Tube
FNS Female NPT
Part Number Description
Male BSPT
5500 379
Fractional
Male NPT
9000 620
Inlet Type
5000 345
ML Fitting
31 F9 8000 552
4500 6S F9 2 310 316
Pressure (psig)
1 SS
Pressure (psig)
Pressure (bar)
S
Pressure (bar)
4000 276 7000 483
31
6000 6L 414
NS
3500 241
RT
SS
FL
Br
as
Alloy 400
s
316L SS
304L SS
Material
316 SS
304 SS
321 SS
2000 138
Brass
Body
3000 207
1500 103
1000 69 2000 137
SS
S4
S1
6L
4L
1000 69
M
500 35
B
0 0 0 0
Series
NDH
-65 100 300 500 700 900 1100 1300 -65 100 300 500 700 900 1100 1300
ND
6.0
F - Panel Thickness
Orifice 0.71"
F - Panel Thickness
5.6
H (Open)
G - Panel
5.2 (18.0mm)
Hole Drill
H (Open)
4.8 G - Panel
Hole Drill
E
3.2
(15.0 mm)
E
2.8
2.4
Orifice 0.39"
2.0
L1
C
(10.0 mm)
1.6 Orifice 0.25"
1.2 (6.4 mm) L1 L2
0.8 C L2
0.4 Orifice 0.16" (4.0 mm)
0 ◎ NF series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
0 1 2 3 4 5 6 7 8 9
Numbers of Turns Open add -Y to the ordering number. Example: NFSS-FNS2-7-Y
Dimensions of NF Series
6.0
F - Panel Thickness
Orifice 0.71"
F - Panel Thickness
5.6
H (Open)
G - Panel
5.2 (18.0mm)
Hole Drill
H (Open)
4.8 G - Panel
Hole Drill
E
3.2
(15.0 mm)
E
2.8
2.4
Orifice 0.39"
2.0
L1
C
(10.0 mm)
1.6 Orifice 0.25"
1.2 (6.4 mm) L1 L2
0.8 C L2
0.4 Orifice 0.16" (4.0 mm)
0 ◎ NF series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
0 1 2 3 4 5 6 7 8 9
Numbers of Turns Open add -Y to the ordering number. Example: NFSS-FNS2-7-Y
Dimensions of NF Series
Dimensions of NF Series
F - Panel Thickness
F - Panel Thickness
0.86
H (Open)
NF □□ -FNS8-9 1/2 Female NPT 1/2 Female NPT G - Panel
(22.5) Hole Drill
H (Open)
G - Panel
0.86
NF □□ -FNS12-9 3/4 Female NPT 3/4 Female NPT 1.56 1.56 (22.5) Hole Drill
(39.7) (39.7)
NF □□ -NS8-9 1/2 Male NPT 1/2 Male NPT
E
NF □□ -NS12-9 3/4 Male NPT 3/4 Male NPT
E
NF □□ -FL12-9 3/4" FITOK 3/4" FITOK
L1
C
NF □□ -ML14-9 14 mm FITOK 14 mm FITOK
1.97 1.97 L1 L2
NF □□ -ML16-9 16 mm FITOK 16 mm FITOK (50.0) (50.0)
C L2
0.76
NF □□ -ML18-9 18 mm FITOK 18 mm FITOK (19.4)
◎ NFH series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
NF □□ -ML20-9 20 mm FITOK 20 mm FITOK
add -Y to the ordering number. Example: NFHSS-FNS2-7-Y
NF □□ -MTS14-9-G 14 mm MTS 14 mm MTS 0.39 3.86 3.50 1.10 0.38 1.08
2.18
(10.0) (98.0) (88.9) (28.3) (9.7) (27.5)
NF □□ -MTS16-9-G 16 mm MTS 16 mm MTS
NF □□ -MTS18-9-G 18 mm MTS 18 mm MTS 1.56 1.56 Dimensions of NFH Series
(39.7) (39.7)
NF □□ -TS12-9-G 3/4" TS 3/4" TS
0.86
NF □□ -PS8-9-G 1/2 PS 1/2 PS (22.5) Connection Type and Size Dimension, in.(mm)
Basic Ordering Orifice
NF □□ -MTB16-9-G 16 mm MTB 16 mm MTB Number in.(mm) Cv
Inlet Outlet L1 L2 H D C E F G
NF □□ -UMB14-9 14 mm UMB 14 mm UMB 2.98 2.98
(75.7) (75.7) 1.00 1.00
NF □□ -UMB16-9 16 mm UMB 16 mm UMB 0.76 NFH□□-FNS2-7 1/8 Female NPT 1/8 Female NPT (25.4) (25.4)
(19.4)
NF □□ -FO12-9 3/4" Male FO 3/4" Male FO 1.06 1.06
NFH□□-FNS4-7 1/4 Female NPT 1/4 Female NPT (26.2) (26.2)
NF □□ -FR12-9 3/4" Male FR 3/4" Male FR 1.56 1.56
(39.7) (39.7) 1.22 1.22
NF □□ -MS27-9 M27 x 2 Male Metric M27 x 2 Male Metric NFH□□-NS4-7 1/4 Male NPT 1/4 Male NPT 0.16 (30.9) (30.9) 2.85 2.17 0.62 0.76 0.25 0.77
0.35
(4.0) (72.5) (55.0) (15.8) (19.4) (6.4) (19.6)
NF □□ -FNS12-6 3/4 Female NPT 3/4 Female NPT 1.06 1.22
NFH□□-FNS4-NS4-7 1/4 Female NPT 1/4 Male NPT (26.2) (30.9)
NF □□ -TS16-6-G 1" TS 1" TS 1.41 1.41
NFH□□-FL4-7 1/4" FITOK 1/4" FITOK (35.8) (35.8)
NF □□ -MTS25-6-G 25 mm MTS 25 mm MTS
1.97 1.97 1.06 1.06
NF □□ -MTS28-6-G 28 mm MTS 28 mm MTS (50.0) (50.0) NFH□□-TS4-7-G 1/4" TS 1/4" TS (26.2) (26.2)
NF □□ -PS12-6-G 3/4 PS 3/4 PS NFH□□-FNS4-8 1/4 Female NPT 1/4 Female NPT
5.00 5.00 1.08 1.61 0.38 1.45 1.12 1.12
NF □□ -PB12-6-G 3/4 PB 3/4 PB 0.59 3.27 0.25 (28.6) (28.6) 3.38 2.50 0.76 0.87 0.38 0.96
(15.0) (127) (127) (27.5) (41.0) (9.7) (36.8)
NFH□□-FNS6-8 3/8 Female NPT 3/8 Female NPT (6.4)
0.85
(85.8) (63.5) (19.4) (22.0) (9.7) (24.4)
NF □□ -FL12-6 3/4" FITOK 3/4" FITOK 1.50 1.50
NFH□□-NS6-8 3/8 Male NPT 3/8 Female NPT (38.1) (38.1)
NF □□ -FL16-6 1" FITOK 1" FITOK
2.35 2.35
NF □□ -ML20-6 20 mm FITOK 20 mm FITOK (59.7) (59.7)
1. FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld.
NF □□ -ML22-6 22 mm FITOK 22 mm FITOK 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
NF □□ -ML25-6 25 mm FITOK 25 mm FITOK material due to the high temperature when welding.
NF □□ -FNS16-0 1 Female NPT 1 Female NPT 3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
NF □□ -TS16-0-G 1" TS 1" TS 4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
NF □□ -MTS25-0-G For dimensions not shown above, please contact the authorized representative or FITOK Group.
25 mm MTS 25 mm MTS
0.71 5.65 1.97 1.97 5.33 5.00 1.08 1.61 0.38 1.45
NF □□ -MTS28-0-G 28 mm MTS 28 mm MTS (18.0) (50.0) (50.0) (135.4) (127) (27.5) (41.0) (9.7) (36.8)
1. FITOK means FITOK double ferrule tube fittings, FO means O-ring seal fittings, FR means metal gasket seal fittings,TS means
fractional tube socket weld, MTS means metric tube socket weld, MTB means metric tube butt weld, UMB means nut + gasket +
metric bulge nipple, PS means pipe socket weld, PB means pipe butt weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative orFITOK Group.
14 Needle Valves Needle Valves 15
Dimensions of NF Series
F - Panel Thickness
F - Panel Thickness
0.86
H (Open)
NF □□ -FNS8-9 1/2 Female NPT 1/2 Female NPT G - Panel
(22.5) Hole Drill
H (Open)
G - Panel
0.86
NF □□ -FNS12-9 3/4 Female NPT 3/4 Female NPT 1.56 1.56 (22.5) Hole Drill
(39.7) (39.7)
NF □□ -NS8-9 1/2 Male NPT 1/2 Male NPT
E
NF □□ -NS12-9 3/4 Male NPT 3/4 Male NPT
E
NF □□ -FL12-9 3/4" FITOK 3/4" FITOK
L1
C
NF □□ -ML14-9 14 mm FITOK 14 mm FITOK
1.97 1.97 L1 L2
NF □□ -ML16-9 16 mm FITOK 16 mm FITOK (50.0) (50.0)
C L2
0.76
NF □□ -ML18-9 18 mm FITOK 18 mm FITOK (19.4)
◎ NFH series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
NF □□ -ML20-9 20 mm FITOK 20 mm FITOK
add -Y to the ordering number. Example: NFHSS-FNS2-7-Y
NF □□ -MTS14-9-G 14 mm MTS 14 mm MTS 0.39 3.86 3.50 1.10 0.38 1.08
2.18
(10.0) (98.0) (88.9) (28.3) (9.7) (27.5)
NF □□ -MTS16-9-G 16 mm MTS 16 mm MTS
NF □□ -MTS18-9-G 18 mm MTS 18 mm MTS 1.56 1.56 Dimensions of NFH Series
(39.7) (39.7)
NF □□ -TS12-9-G 3/4" TS 3/4" TS
0.86
NF □□ -PS8-9-G 1/2 PS 1/2 PS (22.5) Connection Type and Size Dimension, in.(mm)
Basic Ordering Orifice
NF □□ -MTB16-9-G 16 mm MTB 16 mm MTB Number in.(mm) Cv
Inlet Outlet L1 L2 H D C E F G
NF □□ -UMB14-9 14 mm UMB 14 mm UMB 2.98 2.98
(75.7) (75.7) 1.00 1.00
NF □□ -UMB16-9 16 mm UMB 16 mm UMB 0.76 NFH□□-FNS2-7 1/8 Female NPT 1/8 Female NPT (25.4) (25.4)
(19.4)
NF □□ -FO12-9 3/4" Male FO 3/4" Male FO 1.06 1.06
NFH□□-FNS4-7 1/4 Female NPT 1/4 Female NPT (26.2) (26.2)
NF □□ -FR12-9 3/4" Male FR 3/4" Male FR 1.56 1.56
(39.7) (39.7) 1.22 1.22
NF □□ -MS27-9 M27 x 2 Male Metric M27 x 2 Male Metric NFH□□-NS4-7 1/4 Male NPT 1/4 Male NPT 0.16 (30.9) (30.9) 2.85 2.17 0.62 0.76 0.25 0.77
0.35
(4.0) (72.5) (55.0) (15.8) (19.4) (6.4) (19.6)
NF □□ -FNS12-6 3/4 Female NPT 3/4 Female NPT 1.06 1.22
NFH□□-FNS4-NS4-7 1/4 Female NPT 1/4 Male NPT (26.2) (30.9)
NF □□ -TS16-6-G 1" TS 1" TS 1.41 1.41
NFH□□-FL4-7 1/4" FITOK 1/4" FITOK (35.8) (35.8)
NF □□ -MTS25-6-G 25 mm MTS 25 mm MTS
1.97 1.97 1.06 1.06
NF □□ -MTS28-6-G 28 mm MTS 28 mm MTS (50.0) (50.0) NFH□□-TS4-7-G 1/4" TS 1/4" TS (26.2) (26.2)
NF □□ -PS12-6-G 3/4 PS 3/4 PS NFH□□-FNS4-8 1/4 Female NPT 1/4 Female NPT
5.00 5.00 1.08 1.61 0.38 1.45 1.12 1.12
NF □□ -PB12-6-G 3/4 PB 3/4 PB 0.59 3.27 0.25 (28.6) (28.6) 3.38 2.50 0.76 0.87 0.38 0.96
(15.0) (127) (127) (27.5) (41.0) (9.7) (36.8)
NFH□□-FNS6-8 3/8 Female NPT 3/8 Female NPT (6.4)
0.85
(85.8) (63.5) (19.4) (22.0) (9.7) (24.4)
NF □□ -FL12-6 3/4" FITOK 3/4" FITOK 1.50 1.50
NFH□□-NS6-8 3/8 Male NPT 3/8 Female NPT (38.1) (38.1)
NF □□ -FL16-6 1" FITOK 1" FITOK
2.35 2.35
NF □□ -ML20-6 20 mm FITOK 20 mm FITOK (59.7) (59.7)
1. FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld.
NF □□ -ML22-6 22 mm FITOK 22 mm FITOK 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
NF □□ -ML25-6 25 mm FITOK 25 mm FITOK material due to the high temperature when welding.
NF □□ -FNS16-0 1 Female NPT 1 Female NPT 3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
NF □□ -TS16-0-G 1" TS 1" TS 4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
NF □□ -MTS25-0-G For dimensions not shown above, please contact the authorized representative or FITOK Group.
25 mm MTS 25 mm MTS
0.71 5.65 1.97 1.97 5.33 5.00 1.08 1.61 0.38 1.45
NF □□ -MTS28-0-G 28 mm MTS 28 mm MTS (18.0) (50.0) (50.0) (135.4) (127) (27.5) (41.0) (9.7) (36.8)
1. FITOK means FITOK double ferrule tube fittings, FO means O-ring seal fittings, FR means metal gasket seal fittings,TS means
fractional tube socket weld, MTS means metric tube socket weld, MTB means metric tube butt weld, UMB means nut + gasket +
metric bulge nipple, PS means pipe socket weld, PB means pipe butt weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative orFITOK Group.
Part Number Description NFS4 - TS16 - MTS25 - 6WR - GYM - ASF2
16 Needle Valves
Body Outlet Outlet Tip Packing Panel Flow Special Cleaning and
Series Inlet Type Inlet Size Orifice Size Stem Type
Material Type Size Material Material Mounting Handle Pattern Application Packaging
Pressure (psig)
0
500
1000
1500
2000
2500
3000
3500
-54
-65
NG Series
Features
38
100
◎ Compact design.
Bra
ss
◎ Working temperature:
93
200
◎ One-piece forged body.
Allo
◎ Live-loaded packing system.
y 40
0
148
300
Temperature (°F)
316
◎ Panel mounting available as an option.
204
400
SS
◎ Easy external adjustments by packing nut.
500
260
NGH Series—Stainless steel: 5000 psig (345 bar)
nitrogen/air at the maximum working pressure.
0
35
69
103
138
172
207
241
◎ Leak-tight performance testing for every valve with
Pressure (bar)
NG Series—Stainless steel, Brass, Alloy 400: 3000 psig (207 bar)
Pressure (psig)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
NG Series: Working pressure up to 3000 psig
-54
-65
NGH Series: Working pressure up to 5000 psig
NGH Series
General Purpose Needle Valves
38
100
316
SS
149
300
Temperature (°F)
Temperature (°C)
500
260
0
35
69
103
138
172
310
345
379
207
241
276
Pressure (bar)
Needle Valves 17
Part Number Description NFS4 - TS16 - MTS25 - 6WR - GYM - ASF2
16 Needle Valves
Body Outlet Outlet Tip Packing Panel Flow Special Cleaning and
Series Inlet Type Inlet Size Orifice Size Stem Type
Material Type Size Material Material Mounting Handle Pattern Application Packaging
Pressure (psig)
0
500
1000
1500
2000
2500
3000
3500
-54
-65
NG Series
Features
38
100
◎ Compact design.
Bra
ss
◎ Working temperature:
93
200
◎ One-piece forged body.
Allo
◎ Live-loaded packing system.
y 40
0
148
300
Temperature (°F)
316
◎ Panel mounting available as an option.
204
400
SS
◎ Easy external adjustments by packing nut.
500
260
NGH Series—Stainless steel: 5000 psig (345 bar)
nitrogen/air at the maximum working pressure.
0
35
69
103
138
172
207
241
◎ Leak-tight performance testing for every valve with
Pressure (bar)
NG Series—Stainless steel, Brass, Alloy 400: 3000 psig (207 bar)
Pressure (psig)
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
NG Series: Working pressure up to 3000 psig
-54
-65
NGH Series: Working pressure up to 5000 psig
NGH Series
General Purpose Needle Valves
38
100
316
SS
149
300
Temperature (°F)
Temperature (°C)
500
260
0
35
69
103
138
172
310
345
379
207
241
276
Pressure (bar)
Needle Valves 17
18 Needle Valves Needle Valves 19
H (Open)
Orifice 0.16"
0.6
(4.0 mm)
0.4 Orifice 0.08"
H (Open)
0.2 (2.0 mm)
0
0 1 2 3 4 5 6 7 8 9
Numbers of Turns Open
L2
C
Panel Mounting Stem Type
L1 L2
1
2 11a 11b 11c C L1
3
4
5
6
Dimensions of NG Series
7
8
9 Connection Type and Size
Basic Ordering Orifice Dimension, in.(mm)
10 Cv
Number Inlet Outlet in.(mm) L1 L2 C D H
11
12 NG□□ -NS2-5 1/8 Male NPT 1/8 Male NPT 0.75 0.75
(19.05) (19.05)
NG□□ -FNS2-5 1/8 Female NPT 1/8 Female NPT 0.81 0.81
0.08 (20.6) (20.6) 0.31 1.00 2.28
(2.0) 0.09 (7.9) (25.4) (57.9)
Taper Regulating Soft NG□□ -FL2-5 1/8" FITOK 1/8" FITOK
0.98 0.98
(25.0) (25.0)
NG□□ -ML3-5 3 mm FITOK 3 mm FITOK
0.81 0.81
NG□□ -FNS2-7 1/8 Female NPT 1/8 Female NPT (20.6) (20.6)
0.98 0.98
Valve Body Material NG□□ -NS4-7 1/4 Male NPT 1/4 Male NPT (25.0) (25.0)
Item Component
316 SS Brass Alloy NG□□ -FL4-7 1/4" FITOK 1/4" FITOK 0.16 1.13 1.13 0.39 1.38 2.50
(4.0) 0.35 (28.7) (28.7) (9.9) (35.0) (63.5)
1 Handle Anodized aluminum or stainless steel or black knob
NG□□ -ML6-7 6 mm FITOK 6 mm FITOK
2 Set Screw Stainless steel 1.17 1.17
NG□□ -ML8-7 8 mm FITOK 8 mm FITOK (29.7) (29.7)
3 Packing Bolt 304 SS/A276 Brass C36000/B16 Alloy 400/B164
2.24 2.24
4 Washer 316 SS/A276 NG□□ -UMB6-7 6 mm UMB 6 mm UMB (57.0) (57.0)
0.53
5 Packing Spring S17700/A693 NG□□ -FNS4-8 1/4 Female NPT 1/4 Female NPT (13.5)
1.06 1.06
(26.9) (26.9) 0.62
6 Washer 316 SS/A276 NG□□ -FNS6-8 3/8 Female NPT 3/8 Female NPT (15.8)
7 Upper Packing 1.12 1.12 0.53
NG□□ -NS6-8 3/8 Male NPT 3/8 Male NPT (28.4) (28.4) (13.5)
PTFE/PEEK
8 Lower Packing 1.50 1.50 0.62
NG□□ -NS8-8 1/2 Male NPT 1/2 Male NPT (38.1) (38.1) (15.8)
9 Packing Washer 316 SS/A276 1.29 1.29
NG□□ -FL6-8 3/8" FITOK 3/8" FITOK (32.8) (32.8)
10 Panel Nut Stainless steel
NG□□ -FL8-8 1/2'' FITOK 1/2'' FITOK 1.40 1.40
11a Stem Chrome-plated 316 SS/A276 0.25 (35.6) (35.6) 0.53 1.88 2.97
(6.4) 0.70 1.30 1.30 (13.5) (47.8) (75.4)
11b Stem Chrome-plated 316 SS/A276 NG□□ -ML10-8 10 mm FITOK 10 mm FITOK (33.0) (33.0)
1.40 1.40
Stem 316 SS/A276 NG□□ -ML12-8 12 mm FITOK 12 mm FITOK (35.6) (35.6)
11c
Stem Tip PCTFE/D1430 or PEEK 1.56 1.56
NG□□ -ML14-8 14 mm FITOK 14 mm FITOK (39.7) (39.7) 0.62
12 Body 316 SS/A182 Brass C37700/B283 Alloy 400/B564 1.50 1.50 (15.8)
NG□□ -MS20-8 M20 x 1.5 Male Metric M20 x 1.5 Male Metric (38.1) (38.1)
Lubricant Molybdenum disulfide-based
NG□□ -UMB10-8 10 mm UMB 10 mm UMB 2.60 2.60 0.53
(66.0) (66.0) (13.5)
NG□□ -UMB14-8 14 mm UMB 14 mm UMB
18 Needle Valves Needle Valves 19
H (Open)
Orifice 0.16"
0.6
(4.0 mm)
0.4 Orifice 0.08"
H (Open)
0.2 (2.0 mm)
0
0 1 2 3 4 5 6 7 8 9
Numbers of Turns Open
L2
C
Panel Mounting Stem Type
L1 L2
1
2 11a 11b 11c C L1
3
4
5
6
Dimensions of NG Series
7
8
9 Connection Type and Size
Basic Ordering Orifice Dimension, in.(mm)
10 Cv
Number Inlet Outlet in.(mm) L1 L2 C D H
11
12 NG□□ -NS2-5 1/8 Male NPT 1/8 Male NPT 0.75 0.75
(19.05) (19.05)
NG□□ -FNS2-5 1/8 Female NPT 1/8 Female NPT 0.81 0.81
0.08 (20.6) (20.6) 0.31 1.00 2.28
(2.0) 0.09 (7.9) (25.4) (57.9)
Taper Regulating Soft NG□□ -FL2-5 1/8" FITOK 1/8" FITOK
0.98 0.98
(25.0) (25.0)
NG□□ -ML3-5 3 mm FITOK 3 mm FITOK
0.81 0.81
NG□□ -FNS2-7 1/8 Female NPT 1/8 Female NPT (20.6) (20.6)
0.98 0.98
Valve Body Material NG□□ -NS4-7 1/4 Male NPT 1/4 Male NPT (25.0) (25.0)
Item Component
316 SS Brass Alloy NG□□ -FL4-7 1/4" FITOK 1/4" FITOK 0.16 1.13 1.13 0.39 1.38 2.50
(4.0) 0.35 (28.7) (28.7) (9.9) (35.0) (63.5)
1 Handle Anodized aluminum or stainless steel or black knob
NG□□ -ML6-7 6 mm FITOK 6 mm FITOK
2 Set Screw Stainless steel 1.17 1.17
NG□□ -ML8-7 8 mm FITOK 8 mm FITOK (29.7) (29.7)
3 Packing Bolt 304 SS/A276 Brass C36000/B16 Alloy 400/B164
2.24 2.24
4 Washer 316 SS/A276 NG□□ -UMB6-7 6 mm UMB 6 mm UMB (57.0) (57.0)
0.53
5 Packing Spring S17700/A693 NG□□ -FNS4-8 1/4 Female NPT 1/4 Female NPT (13.5)
1.06 1.06
(26.9) (26.9) 0.62
6 Washer 316 SS/A276 NG□□ -FNS6-8 3/8 Female NPT 3/8 Female NPT (15.8)
7 Upper Packing 1.12 1.12 0.53
NG□□ -NS6-8 3/8 Male NPT 3/8 Male NPT (28.4) (28.4) (13.5)
PTFE/PEEK
8 Lower Packing 1.50 1.50 0.62
NG□□ -NS8-8 1/2 Male NPT 1/2 Male NPT (38.1) (38.1) (15.8)
9 Packing Washer 316 SS/A276 1.29 1.29
NG□□ -FL6-8 3/8" FITOK 3/8" FITOK (32.8) (32.8)
10 Panel Nut Stainless steel
NG□□ -FL8-8 1/2'' FITOK 1/2'' FITOK 1.40 1.40
11a Stem Chrome-plated 316 SS/A276 0.25 (35.6) (35.6) 0.53 1.88 2.97
(6.4) 0.70 1.30 1.30 (13.5) (47.8) (75.4)
11b Stem Chrome-plated 316 SS/A276 NG□□ -ML10-8 10 mm FITOK 10 mm FITOK (33.0) (33.0)
1.40 1.40
Stem 316 SS/A276 NG□□ -ML12-8 12 mm FITOK 12 mm FITOK (35.6) (35.6)
11c
Stem Tip PCTFE/D1430 or PEEK 1.56 1.56
NG□□ -ML14-8 14 mm FITOK 14 mm FITOK (39.7) (39.7) 0.62
12 Body 316 SS/A182 Brass C37700/B283 Alloy 400/B564 1.50 1.50 (15.8)
NG□□ -MS20-8 M20 x 1.5 Male Metric M20 x 1.5 Male Metric (38.1) (38.1)
Lubricant Molybdenum disulfide-based
NG□□ -UMB10-8 10 mm UMB 10 mm UMB 2.60 2.60 0.53
(66.0) (66.0) (13.5)
NG□□ -UMB14-8 14 mm UMB 14 mm UMB
20 Needle Valves Needle Valves 21
Dimensions of NG Series
H (Open)
1.90 1.90 0.76
NG□□ -FL12-9 3/4" FITOK 3/4" FITOK (48.3) (48.3) (19.4)
H (Open)
NG□□ -ML14-9 14 mm FITOK 14 mm FITOK
1. FITOK means FITOK double ferrule tube fittings, UMB means nut + gasket + metric bulge nipple.
2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
3. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative or FITOK Group.
L2
C
L1 L2
C L1
Dimensions of NG Series
H (Open)
1.90 1.90 0.76
NG□□ -FL12-9 3/4" FITOK 3/4" FITOK (48.3) (48.3) (19.4)
H (Open)
NG□□ -ML14-9 14 mm FITOK 14 mm FITOK
1. FITOK means FITOK double ferrule tube fittings, UMB means nut + gasket + metric bulge nipple.
2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
3. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative or FITOK Group.
L2
C
L1 L2
C L1
0.39 (10.0)
0.25 (6.4)
0.16 (4.0)
0.08 (2.0)
NGH□□-FL8-9
NGH□□-FL12-9
NGH□□-FNS8-9
NGH□□-NS12-9
Basic Ordering
NGH□□-ML14-9
NGH□□-FNS12-9
22 Needle Valves
E
1/2'' FITOK
3/4" FITOK
3/4 Male NPT
Inlet
Dimensions of NGH Series
14 mm FITOK
0.75 (19.1)
0.50 (12.7)
0.44 (11.2)
0.44 (11.2)
3/4 Female NPT
1/2 Female NPT
Dimension, in.(mm)
F
Panel Mount Dimensions of NGH Series
1.03 (26.2)
0.78 (19.8)
0.53 (13.5)
0.47 (11.9)
1/2'' FITOK
3/4" FITOK
14 mm FITOK
0.39
(10.0)
Orifice
in.(mm)
Cv
1.80
F - Panel
Hole Drill
L1
1.90
1.63
1.56
(48.3)
(41.3)
(39.7)
L2
1.90
1.63
1.56
(48.3)
(41.3)
(39.7)
For dimensions not shown above, please contact the authorized representative or FITOK Group.
1. FITOK means FITOK double ferrule tube fittings, UMB means nut + gasket + metric bulge nipple.
C
0.76
0.89
0.76
(19.4)
(22.5)
(19.4)
D
3.50
Dimension, in.(mm)
(88.9)
E
Thickness
Panel Mount
1/16" to 1/4"
H
3.37
(85.7)
2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
0.39 (10.0)
0.25 (6.4)
0.16 (4.0)
0.08 (2.0)
NGH□□-FL8-9
NGH□□-FL12-9
NGH□□-FNS8-9
NGH□□-NS12-9
Basic Ordering
NGH□□-ML14-9
NGH□□-FNS12-9
22 Needle Valves
E
1/2'' FITOK
3/4" FITOK
3/4 Male NPT
Inlet
Dimensions of NGH Series
14 mm FITOK
0.75 (19.1)
0.50 (12.7)
0.44 (11.2)
0.44 (11.2)
3/4 Female NPT
1/2 Female NPT
Dimension, in.(mm)
F
Panel Mount Dimensions of NGH Series
1.03 (26.2)
0.78 (19.8)
0.53 (13.5)
0.47 (11.9)
1/2'' FITOK
3/4" FITOK
14 mm FITOK
0.39
(10.0)
Orifice
in.(mm)
Cv
1.80
F - Panel
Hole Drill
L1
1.90
1.63
1.56
(48.3)
(41.3)
(39.7)
L2
1.90
1.63
1.56
(48.3)
(41.3)
(39.7)
For dimensions not shown above, please contact the authorized representative or FITOK Group.
1. FITOK means FITOK double ferrule tube fittings, UMB means nut + gasket + metric bulge nipple.
C
0.76
0.89
0.76
(19.4)
(22.5)
(19.4)
D
3.50
Dimension, in.(mm)
(88.9)
E
Thickness
Panel Mount
1/16" to 1/4"
H
3.37
(85.7)
2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
Panel Mounting
NR Series
NRG (With gauge port) Series 1
3
Features
4
◎ Cold drawn square bar. 5
◎ Nonrotating stem for longer seat life. 6
◎ Roddable, straight through flow path for maximum
7
flow with minimum pressure drop.
8
◎ Stem thread lubricant isolated from system media.
◎ Replaceable seat and stem tip design. 9
5000 345
1.2
31
4500 310
6
1.0
SS
Pressure (psig)
4000 276
Pressure (bar)
Orifice 0.19"
3500 241 0.8 (4.8 mm)
3000 207 0.6
2500 172 0.4
2000 138
0.2
1500 103
0
1000 69 0 1 2 3 4 5
500 35 Numbers of Turns Open
0 0
-20 0 50 100 150 200 250 300 350 400 450
Temperature (°F)
Panel Mounting
NR Series
NRG (With gauge port) Series 1
3
Features
4
◎ Cold drawn square bar. 5
◎ Nonrotating stem for longer seat life. 6
◎ Roddable, straight through flow path for maximum
7
flow with minimum pressure drop.
8
◎ Stem thread lubricant isolated from system media.
◎ Replaceable seat and stem tip design. 9
5000 345
1.2
31
4500 310
6
1.0
SS
Pressure (psig)
4000 276
Pressure (bar)
Orifice 0.19"
3500 241 0.8 (4.8 mm)
3000 207 0.6
2500 172 0.4
2000 138
0.2
1500 103
0
1000 69 0 1 2 3 4 5
500 35 Numbers of Turns Open
0 0
-20 0 50 100 150 200 250 300 350 400 450
Temperature (°F)
NRG □□ -FNS8-8
NRG □□ -FNS4-7
Dimensions
NR □□ -NS8-FNS8-8
NR □□ -NS8-FNS4-7
NR □□ -NS4-FNS4-7
26 Needle Valves
NR □□ -NS12-FNS8-8
NRG □□ -NS8-FNS4-7
NRG □□ -NS12-FNS8-8
F - Panel Thickness
Inlet
L2
E
C H (Open)
Outlet
Connection Type and Size
0.19
0.25
(6.4)
(4.8)
Orifice
add -Y to the ordering number. Example: NRSS-FNS4-7-Y
in.(mm)
F - Panel Thickness
Cv
1.80
0.63
L1
L1
2.16
1.89
1.78
3.33
1.33
3.12
1.12
1.12
(84.6)
(54.9)
(33.8)
(79.2)
(28.4)
(48.0)
(45.2)
(28.4)
D
1. Sizes and types listed are standard. Other sizes and types are available upon request.
L2
2.25
1.75
1.33
1.12
NRG Series
(57.2)
(33.8)
(44.4)
(28.4)
L2
Gauge Port Pattern
C
0.44
0.56
0.50
(14.3)
(12.7)
(11.1)
G - Panel
2. For dimensions not shown above, please contact the authorized representative or FITOK Group.
Hole Drill
2.17
2.50
(55.0)
(63.5)
1/4-18 NPT
E
E
H (Open)
1.28
1.34
1.40
C
(32.5)
(35.5)
(34.0)
◎ NR series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
Dimension, in.(mm)
F
0.38
0.38
(9.7)
(9.7)
G
0.77
0.77
(19.6)
(19.6)
H
3.77
3.83
(97.3)
(95.8)
CS Carbon
Steel
904L 904L SS 1. Cleaning and Packaging:
FC-01: Standard cleaning and packaging for general industrial procedures.
FC-02: Special cleaning and packaging for wetted system components to ensure compliance with
product cleanliness requirement as stated in ASTM G93 Level C.
Needle Valves 27
NR □□ -FNS8-8
NR □□ -FNS4-7
NRG □□ -FNS8-8
NRG □□ -FNS4-7
Dimensions
NR □□ -NS8-FNS8-8
NR □□ -NS8-FNS4-7
NR □□ -NS4-FNS4-7
26 Needle Valves
NR □□ -NS12-FNS8-8
NRG □□ -NS8-FNS4-7
NRG □□ -NS12-FNS8-8
F - Panel Thickness
Inlet
L2
E
C H (Open)
Outlet
Connection Type and Size
0.19
0.25
(6.4)
(4.8)
Orifice
add -Y to the ordering number. Example: NRSS-FNS4-7-Y
in.(mm)
F - Panel Thickness
Cv
1.80
0.63
L1
L1
2.16
1.89
1.78
3.33
1.33
3.12
1.12
1.12
(84.6)
(54.9)
(33.8)
(79.2)
(28.4)
(48.0)
(45.2)
(28.4)
D
1. Sizes and types listed are standard. Other sizes and types are available upon request.
L2
2.25
1.75
1.33
1.12
NRG Series
(57.2)
(33.8)
(44.4)
(28.4)
L2
Gauge Port Pattern
C
0.44
0.56
0.50
(14.3)
(12.7)
(11.1)
G - Panel
2. For dimensions not shown above, please contact the authorized representative or FITOK Group.
Hole Drill
2.17
2.50
(55.0)
(63.5)
1/4-18 NPT
E
E
H (Open)
1.28
1.34
1.40
C
(32.5)
(35.5)
(34.0)
◎ NR series valves are standard without panel mounting. To order valves with panel mounting as illustrated,
Dimension, in.(mm)
F
0.38
0.38
(9.7)
(9.7)
G
0.77
0.77
(19.6)
(19.6)
H
3.77
3.83
(97.3)
(95.8)
CS Carbon
Steel
904L 904L SS 1. Cleaning and Packaging:
FC-01: Standard cleaning and packaging for general industrial procedures.
FC-02: Special cleaning and packaging for wetted system components to ensure compliance with
product cleanliness requirement as stated in ASTM G93 Level C.
Needle Valves 27
28 Needle Valves Needle Valves 29
Dimensions
Toggle Valves
Straight Pattern Angle Pattern
NT Series
Features
◎ One piece forged body.
◎ Straight and angle pattern.
H (Open)
◎ Compact design.
Panel Mount
◎ Quick opening or closing. E - Panel Thickness
Hole Drill 1/16" to 1/4"
◎ Nonrotating stem tip.
H (Open)
(1.6mm to 6.4mm)
◎ Panel mounting available. Panel Mount
E - Panel Thickness
◎ Leak-tight performance testing for every valve with nitrogen/air Hole Drill 1/16" to 1/4"
D
at the maximum working pressure. (1.6mm to 6.4mm)
D
Technical Data
L1
C
L1 L2 C L2
Orifice Working Pressure O-ring Material Temperature Rating
in.(mm) at 100oF (38oC)
0.08 (2.0) FKM(Standard) -20°F to 400°F (-28°C to 204°C)
300 psig (20.7 bar)
0.125 (3.2) Buna N -20°F to 212°F (-28°C to 100°C) Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
Cv
0.25 (6.4) 200 psig (13.7 bar) Ethylene Propylene -20°F to 300°F (-28°C to 148°C) Number Inlet Outlet in.(mm) L1 L2 C D E H
0.75 0.75
NT□□-NS2-5 1/8 Male NPT 1/8 Male NPT (19.05) (19.05)
Standard Materials of Construction NT□□-NS2-FL2-5 1/8 Male NPT 1/8" FITOK 0.08
0.11
0.75
(19.05)
0.98
(25.0) 0.32 0.85 0.53 2.83
(2.0) (8.2) (21.7) (13.5) (71.9)
NT□□-FL2-5 1/8" FITOK 1/8" FITOK 0.98 0.98
1 (25.0) (25.0)
2 NT□□-ML3-5 3 mm FITOK 3 mm FITOK
0.81 0.81
3 NT□□-FNS2-7 1/8 Female NPT 1/8 Female NPT (20.6) (20.6)
4 0.86 0.86
NT□□-NS2-7 1/8 Male NPT 1/8 Male NPT (21.8) (21.8)
5 0.98 0.98
6
NT□□-NS4-7 1/4 Male NPT 1/4 Male NPT (25.0) (25.0) 0.39 0.85 0.53 2.83
0.125 0.98 (10.0) (21.7) (13.5) (71.9)
7 NT□□-NS4-FL4-7 1/4 Male NPT 1/4" FITOK (3.2) 0.20 (25.0)
8 1.13
NT□□-FL4-7 1/4" FITOK 1/4" FITOK (28.7)
9 1.13
NT□□-ML6-7 6 mm FITOK 6 mm FITOK (28.7)
NT□□-ML8-7 8 mm FITOK 8 mm FITOK
NT□□-FNS4-8 1/4 Female NPT 1/4 Female NPT
1.06 1.06
(26.9) (26.9)
NT□□-FNS6-8 3/8 Female NPT 3/8 Female NPT
NT□□-NS6-8 3/8 Male NPT 3/8 Male NPT 1.12 1.12
(28.4) (28.4)
1.29 1.29
Valve Body Material NT□□-FL6-8 3/8" FITOK 3/8" FITOK (32.8) (32.8)
Item Component 0.25
(6.4) 0.70 0.53 1.06 0.66 3.59
316 SS 304 SS 321 SS Brass NT□□-FL8-8 1/2'' FITOK 1/2'' FITOK 1.40 1.40
(13.5) (26.9) (16.8) (91.2)
(35.6) (35.6)
1 Handle Stainless steel 1.36 1.36
NT□□-ML10-8 10 mm FITOK 10 mm FITOK (34.5) (34.5)
2 Pin Stainless steel
1.46 1.46
3 Stem 316 SS/A276 304 SS/A276 316 SS/A276 NT□□-ML12-8 12 mm FITOK 12 mm FITOK (37.1) (37.1)
4 Panel Nut Stainless steel Brass C36000/B16
1. FITOK means FITOK double ferrule tube fittings,ISO means metric thread,
5 Spring PTFE-plated S17700/A313 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
6 Bonnet 304 SS/A276 304 SS/A276 304 SS/A276 Brass C36000/B16 3. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
7 O-ring Fluorocarbon FKM or Buna or Ethylene propylene dimensions not shown above, please contact the authorized representative orFITOK Group.
8 Stem Tip PTFE/D1710
9 Body 316 SS/A182 304 SS/A182 321 SS/A182 Brass C37700/B283
Lubricant Molybdenum disulfide-based
28 Needle Valves Needle Valves 29
Dimensions
Toggle Valves
Straight Pattern Angle Pattern
NT Series
Features
◎ One piece forged body.
◎ Straight and angle pattern.
H (Open)
◎ Compact design.
Panel Mount
◎ Quick opening or closing. E - Panel Thickness
Hole Drill 1/16" to 1/4"
◎ Nonrotating stem tip.
H (Open)
(1.6mm to 6.4mm)
◎ Panel mounting available. Panel Mount
E - Panel Thickness
◎ Leak-tight performance testing for every valve with nitrogen/air Hole Drill 1/16" to 1/4"
D
at the maximum working pressure. (1.6mm to 6.4mm)
D
Technical Data
L1
C
L1 L2 C L2
Orifice Working Pressure O-ring Material Temperature Rating
in.(mm) at 100oF (38oC)
0.08 (2.0) FKM(Standard) -20°F to 400°F (-28°C to 204°C)
300 psig (20.7 bar)
0.125 (3.2) Buna N -20°F to 212°F (-28°C to 100°C) Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
Cv
0.25 (6.4) 200 psig (13.7 bar) Ethylene Propylene -20°F to 300°F (-28°C to 148°C) Number Inlet Outlet in.(mm) L1 L2 C D E H
0.75 0.75
NT□□-NS2-5 1/8 Male NPT 1/8 Male NPT (19.05) (19.05)
Standard Materials of Construction NT□□-NS2-FL2-5 1/8 Male NPT 1/8" FITOK 0.08
0.11
0.75
(19.05)
0.98
(25.0) 0.32 0.85 0.53 2.83
(2.0) (8.2) (21.7) (13.5) (71.9)
NT□□-FL2-5 1/8" FITOK 1/8" FITOK 0.98 0.98
1 (25.0) (25.0)
2 NT□□-ML3-5 3 mm FITOK 3 mm FITOK
0.81 0.81
3 NT□□-FNS2-7 1/8 Female NPT 1/8 Female NPT (20.6) (20.6)
4 0.86 0.86
NT□□-NS2-7 1/8 Male NPT 1/8 Male NPT (21.8) (21.8)
5 0.98 0.98
6
NT□□-NS4-7 1/4 Male NPT 1/4 Male NPT (25.0) (25.0) 0.39 0.85 0.53 2.83
0.125 0.98 (10.0) (21.7) (13.5) (71.9)
7 NT□□-NS4-FL4-7 1/4 Male NPT 1/4" FITOK (3.2) 0.20 (25.0)
8 1.13
NT□□-FL4-7 1/4" FITOK 1/4" FITOK (28.7)
9 1.13
NT□□-ML6-7 6 mm FITOK 6 mm FITOK (28.7)
NT□□-ML8-7 8 mm FITOK 8 mm FITOK
NT□□-FNS4-8 1/4 Female NPT 1/4 Female NPT
1.06 1.06
(26.9) (26.9)
NT□□-FNS6-8 3/8 Female NPT 3/8 Female NPT
NT□□-NS6-8 3/8 Male NPT 3/8 Male NPT 1.12 1.12
(28.4) (28.4)
1.29 1.29
Valve Body Material NT□□-FL6-8 3/8" FITOK 3/8" FITOK (32.8) (32.8)
Item Component 0.25
(6.4) 0.70 0.53 1.06 0.66 3.59
316 SS 304 SS 321 SS Brass NT□□-FL8-8 1/2'' FITOK 1/2'' FITOK 1.40 1.40
(13.5) (26.9) (16.8) (91.2)
(35.6) (35.6)
1 Handle Stainless steel 1.36 1.36
NT□□-ML10-8 10 mm FITOK 10 mm FITOK (34.5) (34.5)
2 Pin Stainless steel
1.46 1.46
3 Stem 316 SS/A276 304 SS/A276 316 SS/A276 NT□□-ML12-8 12 mm FITOK 12 mm FITOK (37.1) (37.1)
4 Panel Nut Stainless steel Brass C36000/B16
1. FITOK means FITOK double ferrule tube fittings,ISO means metric thread,
5 Spring PTFE-plated S17700/A313 2. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
6 Bonnet 304 SS/A276 304 SS/A276 304 SS/A276 Brass C36000/B16 3. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
7 O-ring Fluorocarbon FKM or Buna or Ethylene propylene dimensions not shown above, please contact the authorized representative orFITOK Group.
8 Stem Tip PTFE/D1710
9 Body 316 SS/A182 304 SS/A182 321 SS/A182 Brass C37700/B283
Lubricant Molybdenum disulfide-based
30 Needle Valves Needle Valves 31
Al
4500 27 310
Pressure (psig)
SS
Pressure (bar)
lo
6
Pressure (psig)
7000 483
Pressure (bar)
y
4000 276 31
40
6S
6000 414
0
3500 241 S
316
5000 LS 345
Ti
3000 207 S
ta
4000 276
ni
2500 172
um
2000 138 3000 207
1000 69 1000 69
0 0
500 35
-65 100 300 500 700 900 1100 1300
0 0 Temperature (°F)
-65 100 300 500 700 900 1100 1300
Temperature (°F)
Al
4500 27 310
Pressure (psig)
SS
Pressure (bar)
lo
6
Pressure (psig)
7000 483
Pressure (bar)
y
4000 276 31
40
6S
6000 414
0
3500 241 S
316
5000 LS 345
Ti
3000 207 S
ta
4000 276
ni
2500 172
um
2000 138 3000 207
1000 69 1000 69
0 0
500 35
-65 100 300 500 700 900 1100 1300
0 0 Temperature (°F)
-65 100 300 500 700 900 1100 1300
Temperature (°F)
H (Open)
H (Open)
0.8 Hole Drill
1/16" to 3/8"
Panel Mount
0.6
1/16" to 3/8"
Panel Mount
Orifice 0.16" (4.0 mm)
Thickness
0.4
Thickness
0.2
0
E
0 1 2 3 4 5 6 7 8 9
FE
Numbers of Turns Open
D
Standard Materials of Construction
L4
Stem Type 11 e L1 L2
1
D L3
2
11 a 11 b 11 c 11 d
3 Dimensions of NU Series
4
5
Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
6 Cv
Number Inlet Outlet in.(mm) L1 L2 L3 L4 C D E F H
7
1.00 1.00
8 NU □□-FNS2-7 1/8 Female NPT 1/8 Female NPT (25.4) (25.4)
9 1.03 1.03 0.89
NU □□-FNS4-7 1/4 Female NPT 1/4 Female NPT (26.2) (26.2) (22.6)
10
1.00 1.03
NU □□-NS4-FNS4-7 1/4 Male NPT 1/4 Female NPT (25.4) (26.2)
11
Taper Regulating Ball Soft 1.00
12 NU □□-NS4-7 1/4 Male NPT 1/4 Male NPT 1.00 1.00 1.00 (25.4)
(25.4) (25.4) (25.4)
Riveting NU □□-NS6-7 3/8 Male NPT 3/8 Male NPT
(Only NUH) NU □□-FRP4-7 1/4 Female BSPP 1/4 Female BSPP 1.03 1.03 0.89
0.16 (26.2) (26.2) (22.6) 1.75 0.39 1.09 0.59 3.04
(4.0) 0.35 (44.5) (9.9) (27.7) (15.1) (77.2)
NU □□-NS4-FL4-7 1/4 Male NPT 1/4" FITOK 1.00 1.22
(25.4) (30.9)
NU □□-FNS4-FL4-7 1.03 1.22
1/4 Female NPT 1/4" FITOK (26.2) (30.9)
Valve Body Material
Item Component NU □□-FL4-7 1/4" FITOK 1/4" FITOK 1.14
316 SS Alloy 400 Titanium Alloy C-276 (28.8)
1.22 1.22 1.22
1 Handle Anodized aluminium or stainless steel or black knob NU □□-ML6-7 6 mm FITOK 6 mm FITOK (30.9) (30.9) (30.9)
2 Set Screw Stainless steel NU □□-ML8-7 8 mm FITOK 8 mm FITOK
3 Upper Stem 316 SS/A276 0.91 0.91
NU □□-TS4-7-G 1/4" TS 1/4" TS (23.1) (23.1)
4 Packing Bolt 304 SS/A276 NU □□-FO4-7 1/4" Male FO 1/4" Male FO
0.88 1.19
1.03 1.03 (22.4) (30.2)
5 Lock Nut 316 SS/A276 (26.2) (26.2)
NU □□-FR4-7 1/4" Male FR 1/4" Male FR
6 Panel Nut Stainless steel
NU □□-FNS4-8 1/4 Female NPT 1/4 Female NPT
7 Gland 316 SS/A276 1.00
(25.4)
8 Packing PTFE or PEEK or graphite NU □□-FNS6-8 3/8 Female NPT 3/8 Female NPT 1.13 1.13 1.13
(28.6) (28.6) (28.6)
9 Bonnet 316 SS/A479 Alloy 400/B164 Titanium Gr 4/B348 Alloy C-276/B574 1.06
NU □□-NS6-8 3/8 Male NPT 3/8 Male NPT 0.25 (26.9) 2.50 0.50 1.34 0.78 3.77
0.8
10 Union Nut 316 SS/A276 NU □□-FL6-8 3/8" FITOK 3/8" FITOK
(6.4) 1.41 1.41 1.29 1.66 (63.5) (12.7) (34.0) (19.8) (95.7)
(35.9) (35.9) (32.8) (42.2)
11a 1.52 1.52 1.40 1.65
11b Chrome-plated NU □□-FL8-8 1/2'' FITOK 1/2'' FITOK (38.6) (38.6) (35.6) (41.9)
11c Lower Stem Alloy 400/B164 Titanium Gr 4/B348 Alloy C-276/B574
11d 316 SS/A276 NU □□-ML10-8 10 mm FITOK 10 mm FITOK 1.42 1.42 1.30 1.55
(36.1) (36.1) (33.0) (39.4)
11e
Alloy 400/B164, Titanium Gr 4/B348
Body 316 SS/A182 Alloy C-276/B564
B127, B564 or titanium Gr 4/B381
12
Seat Same as Body
Lubricant Molybdenum disulfide-based
32 Needle Valves Needle Valves 33
H (Open)
H (Open)
0.8 Hole Drill
1/16" to 3/8"
Panel Mount
0.6
1/16" to 3/8"
Panel Mount
Orifice 0.16" (4.0 mm)
Thickness
0.4
Thickness
0.2
0
E
0 1 2 3 4 5 6 7 8 9
FE
Numbers of Turns Open
D
Standard Materials of Construction
L4
Stem Type 11 e L1 L2
1
D L3
2
11 a 11 b 11 c 11 d
3 Dimensions of NU Series
4
5
Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
6 Cv
Number Inlet Outlet in.(mm) L1 L2 L3 L4 C D E F H
7
1.00 1.00
8 NU □□-FNS2-7 1/8 Female NPT 1/8 Female NPT (25.4) (25.4)
9 1.03 1.03 0.89
NU □□-FNS4-7 1/4 Female NPT 1/4 Female NPT (26.2) (26.2) (22.6)
10
1.00 1.03
NU □□-NS4-FNS4-7 1/4 Male NPT 1/4 Female NPT (25.4) (26.2)
11
Taper Regulating Ball Soft 1.00
12 NU □□-NS4-7 1/4 Male NPT 1/4 Male NPT 1.00 1.00 1.00 (25.4)
(25.4) (25.4) (25.4)
Riveting NU □□-NS6-7 3/8 Male NPT 3/8 Male NPT
(Only NUH) NU □□-FRP4-7 1/4 Female BSPP 1/4 Female BSPP 1.03 1.03 0.89
0.16 (26.2) (26.2) (22.6) 1.75 0.39 1.09 0.59 3.04
(4.0) 0.35 (44.5) (9.9) (27.7) (15.1) (77.2)
NU □□-NS4-FL4-7 1/4 Male NPT 1/4" FITOK 1.00 1.22
(25.4) (30.9)
NU □□-FNS4-FL4-7 1.03 1.22
1/4 Female NPT 1/4" FITOK (26.2) (30.9)
Valve Body Material
Item Component NU □□-FL4-7 1/4" FITOK 1/4" FITOK 1.14
316 SS Alloy 400 Titanium Alloy C-276 (28.8)
1.22 1.22 1.22
1 Handle Anodized aluminium or stainless steel or black knob NU □□-ML6-7 6 mm FITOK 6 mm FITOK (30.9) (30.9) (30.9)
2 Set Screw Stainless steel NU □□-ML8-7 8 mm FITOK 8 mm FITOK
3 Upper Stem 316 SS/A276 0.91 0.91
NU □□-TS4-7-G 1/4" TS 1/4" TS (23.1) (23.1)
4 Packing Bolt 304 SS/A276 NU □□-FO4-7 1/4" Male FO 1/4" Male FO
0.88 1.19
1.03 1.03 (22.4) (30.2)
5 Lock Nut 316 SS/A276 (26.2) (26.2)
NU □□-FR4-7 1/4" Male FR 1/4" Male FR
6 Panel Nut Stainless steel
NU □□-FNS4-8 1/4 Female NPT 1/4 Female NPT
7 Gland 316 SS/A276 1.00
(25.4)
8 Packing PTFE or PEEK or graphite NU □□-FNS6-8 3/8 Female NPT 3/8 Female NPT 1.13 1.13 1.13
(28.6) (28.6) (28.6)
9 Bonnet 316 SS/A479 Alloy 400/B164 Titanium Gr 4/B348 Alloy C-276/B574 1.06
NU □□-NS6-8 3/8 Male NPT 3/8 Male NPT 0.25 (26.9) 2.50 0.50 1.34 0.78 3.77
0.8
10 Union Nut 316 SS/A276 NU □□-FL6-8 3/8" FITOK 3/8" FITOK
(6.4) 1.41 1.41 1.29 1.66 (63.5) (12.7) (34.0) (19.8) (95.7)
(35.9) (35.9) (32.8) (42.2)
11a 1.52 1.52 1.40 1.65
11b Chrome-plated NU □□-FL8-8 1/2'' FITOK 1/2'' FITOK (38.6) (38.6) (35.6) (41.9)
11c Lower Stem Alloy 400/B164 Titanium Gr 4/B348 Alloy C-276/B574
11d 316 SS/A276 NU □□-ML10-8 10 mm FITOK 10 mm FITOK 1.42 1.42 1.30 1.55
(36.1) (36.1) (33.0) (39.4)
11e
Alloy 400/B164, Titanium Gr 4/B348
Body 316 SS/A182 Alloy C-276/B564
B127, B564 or titanium Gr 4/B381
12
Seat Same as Body
Lubricant Molybdenum disulfide-based
34 Needle Valves Needle Valves 35
Dimensions of NU Series
1/16" to 1/4"
Panel Mount
H (Open)
NU □□-TS6-8-G 3/8" TS 3/8" TS F - Panel
Thickness
Hole Drill
NU □□-TS8-8-G 1/2" TS 1/2" TS
NU □□-PS4-8-G 1/4 PS 1/4 PS
NU □□-MTS12-8-G 12 mm MTS 12 mm MTS
1.13 1.13 1.00 1.13 2.50 0.50 1.34 0.78 3.70
NU □□-MTS14-8-G 14 mm MTS 14 mm MTS (28.6) (28.6) (25.4) (28.6) (63.5) (12.7) (34.0) (19.8) (94.0)
0.25
0.86
E
(6.4)
NU □□-MTS16-8-G 16 mm MTS 16 mm MTS
NU □□-MTB14-8-G 14 mm MTB 14 mm MTB
NU □□-MTB16-8-G 16 mm MTB 16 mm MTB
D
2.92 2.92 2.55 2.92
NU □□-UMB14-8 14 mm UMB 14 mm UMB (74.1) (74.1) (64.7) (74.1)
1.13 1.13 L1 L2
NU □□-FO8-8 1/2" Male FO 1/2" Male FO (28.6) (28.6)
1.56 1.56
NU □□-FR8-8 1/2" Male FR 1/2" Male FR (39.6) (39.6) Dimensions of NUH Series
NU □□-MS20-8 M20 x 1.5 Male Metric M20 x 1.5 Male Metric 1.50 1.50 1.13 1.50
(38.1) (38.1) (28.6) (38.1)
NU □□-MS22-8 M22 x 1.5 Male Metric M22 x 1.5 Male Metric
Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
NU □□-NS8-9 1/2 Male NPT 1/2 Male NPT Cv
1.56 1.56 1.56 1.56 0.63 1.82 4.76 Number Inlet Outlet in.(mm) L1 L2 C D E F H
(39.6) (39.6) (39.6) (39.6) (16.0) (46.2) (121)
NU □□-FNS8-9 1/2 Female NPT 1/2 Female NPT NUH □□-FNS2-7 1/8 Female NPT 1/8 Female NPT
0.87 2.07 5.00
NU □□-FNS12-9 3/4 Female NPT 3/4 Female NPT (22.2) (52.6) (127)
1.63 1.63 NUH □□-FNS4-7 1/4 Female NPT 1/4 Female NPT 1.13 1.13
(41.3) (41.3) (28.6) (28.6)
NU □□-NS12-9 3/4 Male NPT 3/4 Male NPT
NUH □□-NS4-FNS4-7 1/4 Male NPT 1/4 Female NPT
NU □□-FL8-9 1/2'' FITOK 1/2'' FITOK 0.16 2.50 0.50 1.34 0.78 3.42
NUH □□-NS4-7 1/4 Male NPT 1/4 Male NPT 0.35
(4.0) (63.5) (12.7) (34.1) (19.8) (86.9)
NU □□-FL12-9 3/4" FITOK 3/4" FITOK NUH □□-NS4-FL4-7 1/4 Male NPT 1/4" FITOK 1.13 1.41
NU □□-ML14-9 14 mm FITOK 14 mm FITOK (28.6) (35.8)
NUH □□-FNS4-FL4-7 1/4 Female NPT 1/4" FITOK
1.97 1.97 1.68 2.08
(50.0) (50.0) (42.7) (52.8) 1.41 1.41
NU □□-ML16-9 16 mm FITOK 16 mm FITOK NUH □□-FL4-7 1/4" FITOK 1/4" FITOK (35.8) (35.8)
1.13 1.13
NU □□-ML18-9 18 mm FITOK 18 mm FITOK
NUH □□-TS4-7-G 1/4" TS 1/4" TS (28.6) (28.6)
0.39
1.8
3.50 0.63 1.82 1.03 4.76 NUH □□-FNS4-8 1/4 Female NPT 1/4 Female NPT
NU □□-ML20-9 20 mm FITOK 20 mm FITOK (10.0) (88.9) (16.0) (46.2) (26.2) (121)
NUH □□-NS8-8 1/2 Male NPT 1/2 Male NPT
NU □□-MTS14-9-G 14 mm MTS 14 mm MTS 0.25 1.56
0.86 (39.6)
1.56 3.50 0.63 1.77 1.03 4.09
(6.4) (39.6) (88.9) (16.0) (45.0) (26.2) (104)
NUH□□-TS8-8 1/2" TS 1/2" TS
NU □□-MTS16-9-G 16 mm MTS 16 mm MTS
1.56 1.56 1.31 1.69 NUH□□-MTS12-8 12 mm MTS 12 mm MTS
NU □□-TS8-9-G 1/2" TS 1/2" TS (39.7) (39.7) (33.3) (42.9)
NU □□-TS12-9-G 3/4" TS 3/4" TS 1. FITOK means FITOK double ferrule tube fittings,TS means fractional tube socket weld.
NU □□-MTB16-9-G 16 mm MTB 16 mm MTB 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
2.98 2.98
NU □□-UMB14-9 14 mm UMB 14 mm UMB (75.7) (75.7) 3. Sizes and types listed are standard. Other sizes and types are available upon request.
NU □□-FO12-9 3/4" Male FO 3/4" Male FO 4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
dimensions not shown above, please contact the authorized representative orFITOK Group.
1.56 1.56
NU □□-FR8-9 1/2" Male FR 1/2" Male FR (39.7) (39.7)
NU □□-MS27-9 M27 x 2 Male Metric M27 x 2 Male Metric
1. FITOK means FITOK double ferrule tube fittings, FO means O-ring seal fittings, FR means metal gasket seal fittings,TS means
fractional tube socket weld, MTS means metric tube socket weld, MTB means metric tube butt weld, UMB means nut + gasket +
metric bulge nipple, PS means pipe socket weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
dimensions not shown above, please contact the authorized representative orFITOK Group.
34 Needle Valves Needle Valves 35
Dimensions of NU Series
1/16" to 1/4"
Panel Mount
H (Open)
NU □□-TS6-8-G 3/8" TS 3/8" TS F - Panel
Thickness
Hole Drill
NU □□-TS8-8-G 1/2" TS 1/2" TS
NU □□-PS4-8-G 1/4 PS 1/4 PS
NU □□-MTS12-8-G 12 mm MTS 12 mm MTS
1.13 1.13 1.00 1.13 2.50 0.50 1.34 0.78 3.70
NU □□-MTS14-8-G 14 mm MTS 14 mm MTS (28.6) (28.6) (25.4) (28.6) (63.5) (12.7) (34.0) (19.8) (94.0)
0.25
0.86
E
(6.4)
NU □□-MTS16-8-G 16 mm MTS 16 mm MTS
NU □□-MTB14-8-G 14 mm MTB 14 mm MTB
NU □□-MTB16-8-G 16 mm MTB 16 mm MTB
D
2.92 2.92 2.55 2.92
NU □□-UMB14-8 14 mm UMB 14 mm UMB (74.1) (74.1) (64.7) (74.1)
1.13 1.13 L1 L2
NU □□-FO8-8 1/2" Male FO 1/2" Male FO (28.6) (28.6)
1.56 1.56
NU □□-FR8-8 1/2" Male FR 1/2" Male FR (39.6) (39.6) Dimensions of NUH Series
NU □□-MS20-8 M20 x 1.5 Male Metric M20 x 1.5 Male Metric 1.50 1.50 1.13 1.50
(38.1) (38.1) (28.6) (38.1)
NU □□-MS22-8 M22 x 1.5 Male Metric M22 x 1.5 Male Metric
Basic Ordering Connection Type and Size Orifice Dimension, in.(mm)
NU □□-NS8-9 1/2 Male NPT 1/2 Male NPT Cv
1.56 1.56 1.56 1.56 0.63 1.82 4.76 Number Inlet Outlet in.(mm) L1 L2 C D E F H
(39.6) (39.6) (39.6) (39.6) (16.0) (46.2) (121)
NU □□-FNS8-9 1/2 Female NPT 1/2 Female NPT NUH □□-FNS2-7 1/8 Female NPT 1/8 Female NPT
0.87 2.07 5.00
NU □□-FNS12-9 3/4 Female NPT 3/4 Female NPT (22.2) (52.6) (127)
1.63 1.63 NUH □□-FNS4-7 1/4 Female NPT 1/4 Female NPT 1.13 1.13
(41.3) (41.3) (28.6) (28.6)
NU □□-NS12-9 3/4 Male NPT 3/4 Male NPT
NUH □□-NS4-FNS4-7 1/4 Male NPT 1/4 Female NPT
NU □□-FL8-9 1/2'' FITOK 1/2'' FITOK 0.16 2.50 0.50 1.34 0.78 3.42
NUH □□-NS4-7 1/4 Male NPT 1/4 Male NPT 0.35
(4.0) (63.5) (12.7) (34.1) (19.8) (86.9)
NU □□-FL12-9 3/4" FITOK 3/4" FITOK NUH □□-NS4-FL4-7 1/4 Male NPT 1/4" FITOK 1.13 1.41
NU □□-ML14-9 14 mm FITOK 14 mm FITOK (28.6) (35.8)
NUH □□-FNS4-FL4-7 1/4 Female NPT 1/4" FITOK
1.97 1.97 1.68 2.08
(50.0) (50.0) (42.7) (52.8) 1.41 1.41
NU □□-ML16-9 16 mm FITOK 16 mm FITOK NUH □□-FL4-7 1/4" FITOK 1/4" FITOK (35.8) (35.8)
1.13 1.13
NU □□-ML18-9 18 mm FITOK 18 mm FITOK
NUH □□-TS4-7-G 1/4" TS 1/4" TS (28.6) (28.6)
0.39
1.8
3.50 0.63 1.82 1.03 4.76 NUH □□-FNS4-8 1/4 Female NPT 1/4 Female NPT
NU □□-ML20-9 20 mm FITOK 20 mm FITOK (10.0) (88.9) (16.0) (46.2) (26.2) (121)
NUH □□-NS8-8 1/2 Male NPT 1/2 Male NPT
NU □□-MTS14-9-G 14 mm MTS 14 mm MTS 0.25 1.56
0.86 (39.6)
1.56 3.50 0.63 1.77 1.03 4.09
(6.4) (39.6) (88.9) (16.0) (45.0) (26.2) (104)
NUH□□-TS8-8 1/2" TS 1/2" TS
NU □□-MTS16-9-G 16 mm MTS 16 mm MTS
1.56 1.56 1.31 1.69 NUH□□-MTS12-8 12 mm MTS 12 mm MTS
NU □□-TS8-9-G 1/2" TS 1/2" TS (39.7) (39.7) (33.3) (42.9)
NU □□-TS12-9-G 3/4" TS 3/4" TS 1. FITOK means FITOK double ferrule tube fittings,TS means fractional tube socket weld.
NU □□-MTB16-9-G 16 mm MTB 16 mm MTB 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
2.98 2.98
NU □□-UMB14-9 14 mm UMB 14 mm UMB (75.7) (75.7) 3. Sizes and types listed are standard. Other sizes and types are available upon request.
NU □□-FO12-9 3/4" Male FO 3/4" Male FO 4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
dimensions not shown above, please contact the authorized representative orFITOK Group.
1.56 1.56
NU □□-FR8-9 1/2" Male FR 1/2" Male FR (39.7) (39.7)
NU □□-MS27-9 M27 x 2 Male Metric M27 x 2 Male Metric
1. FITOK means FITOK double ferrule tube fittings, FO means O-ring seal fittings, FR means metal gasket seal fittings,TS means
fractional tube socket weld, MTS means metric tube socket weld, MTB means metric tube butt weld, UMB means nut + gasket +
metric bulge nipple, PS means pipe socket weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change. For
dimensions not shown above, please contact the authorized representative orFITOK Group.
Part Number Description
NUSS - FNS6 - FL6 - 8WB - GM - ASF2
36 Needle Valves
Body Outlet Outlet Lower Stem Packing Flow Special Cleaning and
Series Inlet Type Inlet Size Orifice Size Stem Type Handle
Material Type Size Material Material Pattern Application Packaging
Pressure (psig)
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
500
0
-54
-65
NY Series
Features
38
at 6000 psig.
Al
100
loy
40
0
◎ Cold drawn bar.
149
300
◎ Base mount option.
316
◎ Working temperature:
500
260
◎ Working pressure up to:
SS
Al
lo
packing and thelower stem.
700
371
C-
27
Temperature (°F)
Temperature (°C)
900
482
PTFE: -65°F to 450°F(-54°C to 232°C)
PEEK: -65°F to 500°F (-54°C to 260°C)
Needle Valves
593
704
NY Series—Stainless steel: 6000 psig (414 bar)
1100 1300
0
35
69
103
138
172
NYH Series—Stainless steel: 10000 psig (690 bar)
310
345
379
207
241
276
414
448
Pressure (bar)
◎ Stem threads completely isolated from system media.
Pressure (psig)
◎ Self centering nonrotating spindle tip for bubble tight shut off.
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
11000
-54
-65
NY Series: Working pressure up to 6000 psig
38
100
NYH Series
NYH Series: Working pressure up to 10000 psig
148
300
31
6L
2. Contact the authorized representative or FITOK Group for curve graph of other materials.
SS
500
260
Outside Screw and Yoke (OS&Y)
316
700
371
SS
Temperature (°F)
Temperature (°C)
900
704482
593
0
1100 1300
69
137
758
345
552
207
276
620
690
414
483
Pressure (bar)
Needle Valves 37
Part Number Description
NUSS - FNS6 - FL6 - 8WB - GM - ASF2
36 Needle Valves
Body Outlet Outlet Lower Stem Packing Flow Special Cleaning and
Series Inlet Type Inlet Size Orifice Size Stem Type Handle
Material Type Size Material Material Pattern Application Packaging
Pressure (psig)
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
500
0
-54
-65
NY Series
Features
38
at 6000 psig.
Al
100
loy
40
0
◎ Cold drawn bar.
149
300
◎ Base mount option.
316
◎ Working temperature:
500
260
◎ Working pressure up to:
SS
Al
lo
packing and thelower stem.
700
371
C-
27
Temperature (°F)
Temperature (°C)
900
482
PTFE: -65°F to 450°F(-54°C to 232°C)
PEEK: -65°F to 500°F (-54°C to 260°C)
Needle Valves
593
704
NY Series—Stainless steel: 6000 psig (414 bar)
1100 1300
0
35
69
103
138
172
NYH Series—Stainless steel: 10000 psig (690 bar)
310
345
379
207
241
276
414
448
Pressure (bar)
◎ Stem threads completely isolated from system media.
Pressure (psig)
◎ Self centering nonrotating spindle tip for bubble tight shut off.
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
11000
-54
-65
NY Series: Working pressure up to 6000 psig
38
100
NYH Series
NYH Series: Working pressure up to 10000 psig
148
300
31
6L
2. Contact the authorized representative or FITOK Group for curve graph of other materials.
SS
500
260
Outside Screw and Yoke (OS&Y)
316
700
371
SS
Temperature (°F)
Temperature (°C)
900
704482
593
0
1100 1300
69
137
758
345
552
207
276
620
690
414
483
Pressure (bar)
Needle Valves 37
38 Needle Valves Needle Valves 39
C (Open)
6 2.72
NY□□-FNS6 3/8 Female NPT 3/8 Female NPT (69.2)
13 7 2.93
NY□□-NS6 3/8 Male NPT 3/8 Male NPT (75.0)
14 8 3.00
NY□□-FNS8 1/2 Female NPT 1/2 Female NPT (76.2)
15 9 NY□□-NS8 1/2 Male NPT 1/2 Male NPT 0.16 3.27 1.50 4.04
0.35 (82.0) (38.1) (102.7)
(4.0)
NY□□-NS8-FNS8 1/2 Male NPT 1/2 Female NPT A
3.00
NY□□-PS8-G 1/2 PS 1/2 PS (76.2)
3.54
NY□□-PB8-G 1/2 PB 1/2 PB (89.8)
3.44
NY□□-FL4 1/4" FITOK 1/4" FITOK (87.4) B
3.50 M6 x 1-6H Tapped Holes
NY□□-FL6 3/8" FITOK 3/8" FITOK (88.9) 0.25" (6.4 mm) Deep
3.78
NY□□-FL8 1/2" FITOK 1/2" FITOK (96.0)
NY□□-ML6 6 mm FITOK 6 mm FITOK
3.44
(87.4)
NY□□-ML8 8 mm FITOK 8 mm FITOK 1.2" ( 30.5 mm)
Valve Body Material 3.78
NY□□-ML12 12 mm FITOK 12 mm FITOK (96.0)
Item Component
316 SS
1. FITOK means FITOK double ferrule tube fittings, PS means pipe socket weld, PB means pipe butt weld.
1 Handle Anodized aluminum or stainless steel 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
2 Set Screw Stainless steel material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
3 Upper Stem 316 SS/A276 4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative or FITOK Group.
4 Yoke 316 SS/A182
5 Bolts Stainless steel
6 Packing Washer 316 SS/A276 Dimensions of NYH Series
7 Packing PTFE or PEEK or graphite
8 Packing Washer 316 SS/A276
Connection Type and Size Dimension, in.(mm)
9 Joint Seal 316 SS/A276 Basic Ordering Orifice Cv
Number in.(mm)
10 Nuts Stainless steel Inlet Outlet A B C
C (Open)
11 Gaskets Stainless steel 2.69
NYH□□-FNS4 1/4 Female NPT 1/4 Female NPT (68.2)
12 Gland bridge 316 SS/A182 2.95
NYH□□-NS4 1/4 Male NPT 1/4 Male NPT (75.0)
13 Bolts Stainless steel
2.72
14 Lower Stem Chrome-plated 316 SS/A276 NYH□□-FNS4-NS4 1/4 Female NPT 1/4 Male NPT (69.2)
15 Body 316 SS/A479 3.44 A
NYH□□-FL4 1/4" FITOK 1/4" FITOK (87.4)
Lubricant Molybdenum disulfide-based
0.16 2.69 1.50 4.04
NYH□□-TS4-G 1/4" TS 1/4" TS (4.0)
0.35 (68.2) (38.1)
(102.7)
B
NYH□□-FNS6 3/8 Female NPT 3/8 Female NPT
M6 x 1-6H Tapped Holes
0.25" (6.4 mm) Deep
NYH□□-NS6 3/8 Male NPT 3/8 Male NPT
3.00
(76.2)
NYH□□-FNS8 1/2 Female NPT 1/2 Female NPT
NYH□□-NS8 1/2 Male NPT 1/2 Male NPT 1.2" ( 30.5 mm)
1. FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative or FITOK Group.
38 Needle Valves Needle Valves 39
C (Open)
6 2.72
NY□□-FNS6 3/8 Female NPT 3/8 Female NPT (69.2)
13 7 2.93
NY□□-NS6 3/8 Male NPT 3/8 Male NPT (75.0)
14 8 3.00
NY□□-FNS8 1/2 Female NPT 1/2 Female NPT (76.2)
15 9 NY□□-NS8 1/2 Male NPT 1/2 Male NPT 0.16 3.27 1.50 4.04
0.35 (82.0) (38.1) (102.7)
(4.0)
NY□□-NS8-FNS8 1/2 Male NPT 1/2 Female NPT A
3.00
NY□□-PS8-G 1/2 PS 1/2 PS (76.2)
3.54
NY□□-PB8-G 1/2 PB 1/2 PB (89.8)
3.44
NY□□-FL4 1/4" FITOK 1/4" FITOK (87.4) B
3.50 M6 x 1-6H Tapped Holes
NY□□-FL6 3/8" FITOK 3/8" FITOK (88.9) 0.25" (6.4 mm) Deep
3.78
NY□□-FL8 1/2" FITOK 1/2" FITOK (96.0)
NY□□-ML6 6 mm FITOK 6 mm FITOK
3.44
(87.4)
NY□□-ML8 8 mm FITOK 8 mm FITOK 1.2" ( 30.5 mm)
Valve Body Material 3.78
NY□□-ML12 12 mm FITOK 12 mm FITOK (96.0)
Item Component
316 SS
1. FITOK means FITOK double ferrule tube fittings, PS means pipe socket weld, PB means pipe butt weld.
1 Handle Anodized aluminum or stainless steel 2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
2 Set Screw Stainless steel material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
3 Upper Stem 316 SS/A276 4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative or FITOK Group.
4 Yoke 316 SS/A182
5 Bolts Stainless steel
6 Packing Washer 316 SS/A276 Dimensions of NYH Series
7 Packing PTFE or PEEK or graphite
8 Packing Washer 316 SS/A276
Connection Type and Size Dimension, in.(mm)
9 Joint Seal 316 SS/A276 Basic Ordering Orifice Cv
Number in.(mm)
10 Nuts Stainless steel Inlet Outlet A B C
C (Open)
11 Gaskets Stainless steel 2.69
NYH□□-FNS4 1/4 Female NPT 1/4 Female NPT (68.2)
12 Gland bridge 316 SS/A182 2.95
NYH□□-NS4 1/4 Male NPT 1/4 Male NPT (75.0)
13 Bolts Stainless steel
2.72
14 Lower Stem Chrome-plated 316 SS/A276 NYH□□-FNS4-NS4 1/4 Female NPT 1/4 Male NPT (69.2)
15 Body 316 SS/A479 3.44 A
NYH□□-FL4 1/4" FITOK 1/4" FITOK (87.4)
Lubricant Molybdenum disulfide-based
0.16 2.69 1.50 4.04
NYH□□-TS4-G 1/4" TS 1/4" TS (4.0)
0.35 (68.2) (38.1)
(102.7)
B
NYH□□-FNS6 3/8 Female NPT 3/8 Female NPT
M6 x 1-6H Tapped Holes
0.25" (6.4 mm) Deep
NYH□□-NS6 3/8 Male NPT 3/8 Male NPT
3.00
(76.2)
NYH□□-FNS8 1/2 Female NPT 1/2 Female NPT
NYH□□-NS8 1/2 Male NPT 1/2 Male NPT 1.2" ( 30.5 mm)
1. FITOK means FITOK double ferrule tube fittings, TS means fractional tube socket weld.
2. For Butt or Socket end connections, please prior to choose graphite as packing material, avoiding damage non graphite packing
material due to the high temperature when welding.
3. Sizes and types listed are standard. Other sizes and types are available upon request, refer to the ordering information.
4. Dimensions are shown with FITOK nuts finger-tightened. All dimensions are for reference only and are subject to change.
For dimensions not shown above, please contact the authorized representative or FITOK Group.
Part Number Description
TB Fractional Tube
92 F92 Butt Weld
Metric Tube
INC Alloy 600 MTB Butt Weld
HC Alloy C-276 Fractional
FL TubeFitting
CS Carbon Steel
A105 Metric Tube
ML Fitting
904L 904L SS
Note: "Part Number Description" is used for composition rules of FITOK product model,
Not suitable for specific product part number selection, not random combinations.
If in doubt, please contact FITOK group or authorized agent.
FITOK Group
FITOK GmbH (Headquarter)
Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany
Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495
FITOK, Inc.
13843 North Promenade Blvd., Suite 750, Stafford, Texas 77477, USA
Tel.: +1 281 888 0077 Fax: +1 281 582 4051
FITOK Incorporated
1-4F, Block C, Zone E, Yingtailong lndustrial Park, Dalang Street,
Longhua District, Shenzhen, 518109, China
Tel.: +86 755 2803 2500 Fax: +86 755 2803 2619
info@fitokgroup.com
www.fitokgroup.com
FK-IC-GV-02-EN-160104
www.fitokgroup.com